.\"                                      Hey, EMACS: -*- nroff -*-
.\"
.\" For layout and available macros, see man(7), man-pages(7), groff_man(7)
.\" Please adjust the date whenever revising the manpage.
.\"
.\" Note: Please keep this page in sync with the source, rigctlcom.c
.\"
.TH RIGCTLCOM "1" "2020-09-09" "Hamlib" "Hamlib Utilities"
.
.
.SH NAME
.
rigctlcom \- COM port passthru as TS-2000 emulator to your rig
.
.SH SYNOPSIS
.
.
.SY rigctlcom
.OP \-hlLuV
.OP \-m id
.OP \-r device
.OP \-R device
.OP \-p device
.OP \-d device
.OP \-P type
.OP \-D type
.OP \-s baud
.OP \-S baud
.OP \-c id
.OP \-C parm=val
.OP \-B
.RB [ \-v [ \-Z ]]
.YS
.
.SH DESCRIPTION
Allows programs which can connect to TS-2000 via COM port to use Hamlib or FLRig
radios.  Multiple programs can connect to the radio via FLRig or rigctld.
.
.PP
Virtual serial/COM ports must be set up first using
.BR socat (1)
or similar on POSIX systems (BSD, Linux, OS/X).  On Microsoft Windows
available utilities are
.UR http://com0com.sourceforge.net
com0com
.UE ,
.UR https://freevirtualserialports.com
Free Virtual Serial Ports
.UE ,
or
.UR http://www.virtualserialportdriver.com/
VPSD
.UE .
.
.PP
Please report bugs and provide feedback at the e-mail address given in the
.B BUGS
section below.  Patches and code enhancements sent to the same address are
welcome.
.
.
.SH OPTIONS
.
This program follows the usual GNU command line syntax.  Short options that
take an argument may have the value follow immediately or be separated by a
space.  Long options starting with two dashes (\(oq\-\(cq) require an
\(oq=\(cq between the option and any argument.
.
.PP
Here is a summary of the supported options:
.
.TP
.BR \-m ", " \-\-model = \fIid\fP
Select radio model number.
.IP
See model list (use \(lqrigctlcom -l\(rq).
.IP
.BR Note :
.B rigctlcom
(or third party software using the C API) will use radio model 2 for
.B NET rigctl
(communicating with
.BR rigctld ).
.
.TP
.BR \-r ", " \-\-rig\-file = \fIdevice\fP
Use
.I device
as the file name of the port connected to the radio.
.IP
Often a serial port, but could be a USB to serial adapter.  Typically
.IR /dev/ttyS0 ", " /dev/ttyS1 ", " /dev/ttyUSB0 ,
etc. on Linux,
.IR COM1 ", " COM2 ,
etc. on MS Windows.  The BSD flavors and Mac OS/X have their own designations.
See your system's documentation.
.IP
The special string \(lquh\-rig\(rq may be given to enable micro-ham device
support.
.
.TP
.BR \-R ", " \-\-rig\-file2 = \fIdevice\fP
Use
.I device
as the file name of one of the virtual com ports -- your program will connect
to the other com port of the virtual pair.
.
.IP
Virtual serial ports on POSIX systems can be done with
.BR socat (1):
.
.IP
.in +4n
.EX
.RB $ " socat -d -d pty,raw,echo=0 pty,raw,echo=0"
.EE
.in
.
.IP
See this
.UR https://stackoverflow.com/a/19733677
Stackoverflow answer for using socat
.UE .
.
.IP
On Microsoft Windows available utilities are com0com, Free Virtual Serial
Ports, or VPSD (see
.B DESCRIPTION
above for WWW links).
.
.TP
.BR \-p ", " \-\-ptt\-file = \fIdevice\fP
Use
.I device
as the file name of the Push-To-Talk device using a device file as described
above.
.
.TP
.BR \-d ", " \-\-dcd\-file = \fIdevice\fP
Use
.I device
as the file name of the Data Carrier Detect device using a device file as
described above.
.
.TP
.BR \-P ", " \-\-ptt\-type = \fItype\fP
Use
.I type
of Push-To-Talk device.
.IP
Supported types are \(oqRIG\(cq (CAT command), \(oqDTR\(cq, \(oqRTS\(cq,
\(oqPARALLEL\(cq, \(oqNONE\(cq, overriding PTT type defined in the rig's
backend.
.IP
Some side effects of this command are that when type is set to DTR, read
PTT state comes from the
.B Hamlib
frontend, not read from the radio.  When set to NONE, PTT state cannot be read
or set even if rig backend supports reading/setting PTT status from the rig.
.
.TP
.BR \-D ", " \-\-dcd\-type = \fItype\fP
Use
.I type
of Data Carrier Detect device.
.IP
Supported types are \(oqRIG\(cq (CAT command), \(oqDSR\(cq, \(oqCTS\(cq,
\(oqCD\(cq, \(oqPARALLEL\(cq, \(oqNONE\(cq.
.
.TP
.BR \-s ", " \-\-serial\-speed = \fIbaud\fP
Set serial speed to
.I baud
rate.
.IP
Uses maximum serial speed from radio backend capabilities (set by
.B -m
above) as the default.
.
.TP
.BR \-S ", " \-\-serial\-speed2 = \fIbaud\fP
Set serial speed to
.I baud
rate for virtual com port (see
.BR -R ).
.
.IP
Uses maximum serial speed from radio backend capabilities (set by
.B -m
above) as the default.
.
.TP
.BR \-c ", " \-\-civaddr = \fIid\fP
Use
.I id
as the CI-V address to communicate with the rig.
.IP
Only useful for Icom and some Ten-Tec rigs.
.IP
.BR Note :
The
.I id
is in decimal notation, unless prefixed by
.IR 0x ,
in which case it is hexadecimal.
.
.TP
.BR \-L ", " \-\-show\-conf
List all config parameters for the radio defined with
.B \-m
above.
.
.TP
.BR \-C ", " \-\-set\-conf = \fIparm=val\fP [ \fI,parm=val\fP ]
Set radio configuration parameter(s), e.g.
.IR stop_bits=2 .
.IP
Use the
.B -L
option above for a list of configuration parameters for a given model number.
.
.TP
.BR \-u ", " \-\-dump\-caps
Dump capabilities for the radio defined with
.B -m
above and exit.
.
.TP
.BR \-l ", " \-\-list
List all model numbers defined in
.B Hamlib
and exit.
.IP
The list is sorted by model number.
.IP
.BR Note :
In Linux the list can be scrolled back using
.BR Shift-PageUp / Shift-PageDown ,
or using the scrollbars of a virtual terminal in X or the cmd window in
Windows.  The output can be piped to
.BR more (1)
or
.BR less (1),
e.g. \(lqrigctl -l | more\(rq.
.
.TP
.BR \-n ", " \-\-no\-restore\-ai
.B rigctl
restores the state of auto information (AI) on the controlled rig.
.IP
If this is not desired, for example if you are using
.B rigctl
to turn AI mode on or off, pass this option.
.
.TP
.BR \-B ", " \-\-mapa2b
Maps set_freq on VFOA to VFOB instead.
This allows using CW skimmer with the rig in split mode and clicking on a frequency in CW skimmer
will set VFOB to the transmit frequency.
.
.TP
.BR \-v ", " \-\-verbose
Set verbose mode, cumulative (see
.B DIAGNOSTICS
below).
.
.TP
.BR \-Z ", " \-\-debug\-time\-stamps
Enable time stamps for the debug messages.
.IP
Use only in combination with the
.B -v
option as it generates no output on its own.
.
.TP
.BR \-h ", " \-\-help
Show a summary of these options and exit.
.
.TP
.BR \-V ", " \-\-version
Show version of
.B rigctl
and exit.
.
.PP
.BR Note :
Some options may not be implemented by a given backend and will return an
error.  This is most likely to occur with the
.B \-\-set\-conf
and
.B \-\-show\-conf
options.
.
.
.SH DIAGNOSTICS
.
The
.BR \-v ,
.B \-\-verbose
option allows different levels of diagnostics
to be output to
.B stderr
and correspond to \-v for
.BR BUG ,
\-vv for
.BR ERR ,
\-vvv for
.BR WARN ,
\-vvvv for
.BR VERBOSE ,
or \-vvvvv for
.BR TRACE .
.
.PP
A given verbose level is useful for providing needed debugging information to
the email address below.  For example, TRACE output shows all of the values
sent to and received from the radio which is very useful for radio backend
library development and may be requested by the developers.
.
.
.SH EXIT STATUS
.B rigctlcom
exits with:
.
.TP
.B 0
if all operations completed normally;
.
.TP
.B 1
if there was an invalid command line option or argument;
.
.TP
.B 2
if an error was returned by
.BR Hamlib .
.
.
.SH EXAMPLE
.
Start
.B rigctlcom
with FLRig as the Hamlib model and virtual com port pair COM9/COM10, e.g.
.UR http://n1mm.hamdocs.com
N1MM Logger+
.UE
attaching to COM10 and using the TS-2000 emulator attached to COM9 (assumes
virtual serial/COM ports pipe has been created with the proper utility
as described above):
.
.PP
.in +4n
.EX
.RB $ " rigctlcom -m 4 -R COM9 -S 115200"
.EE
.in
.
.PP
The following diagram shows the communications flow that allows N1MM Logger+
to communicate with a radio connected to Flrig:
.
.PP
.in +4n
.EX
Flrig -><- rigctlcom -> COM9 <- virt_port_pipe -> COM10 <- N1MM
.EE
.in
.
.
.SH BUGS
.
.PP
Report bugs to:
.IP
.nf
.MT hamlib\-developer@lists.sourceforge.net
Hamlib Developer mailing list
.ME
.fi
.
.
.SH COPYING
.
This file is part of Hamlib, a project to develop a library that simplifies
radio, rotator, and amplifier control functions for developers of software
primarily of interest to radio amateurs and those interested in radio
communications.
.
.PP
Copyright \(co 2000-2011 Stephane Fillod
.br
Copyright \(co 2000-2018 the Hamlib Group (various contributors)
.br
Copyright \(co 2010-2020 Nate Bargmann
.br
Copyright \(co 2019 Michael Black W9MDB
.
.PP
This is free software; see the file COPYING for copying conditions.  There is
NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
.
.
.SH SEE ALSO
.
.BR rigctld (1),
.BR rigctl (1),
.BR socat (1),
.BR hamlib (7)
.
.
.SH COLOPHON
.
Links to the Hamlib Wiki, Git repository, release archives, and daily snapshot
archives are available via
.
.UR http://www.hamlib.org
hamlib.org
.UE .