Scroll to navigation

Config::Model::models::LCDd::serialVFD(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::serialVFD(3pm)

NAME

Config::Model::models::LCDd::serialVFD - Configuration class LCDd::serialVFD

DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

Elements

Brightness

Set the initial brightness (4 steps 0-250, 251-500, 501-750, 751-1000) Optional. Type integer.

1000

Device

Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1. Optional. Type uniline.

/dev/ttyS1

ISO_8859_1

enable ISO 8859 1 compatibility Optional. Type boolean.

yes

OffBrightness

Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive (4 steps 0-250, 251-500, 501-750, 751-1000) Optional. Type integer.

0

Port

Number of Custom-Characters. default is display type dependent Custom-Characters=0 Portaddress where the LPT is. Used in parallel mode only. Usual values are 0x278, 0x378 and 0x3BC. Optional. Type uniline.

0x378

PortWait

Set parallel port timing delay (us). Used in parallel mode only. Optional. Type integer.

2

Size

Specifies the size of the VFD. Optional. Type uniline.

20x2

Speed

set the serial port speed Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'.

9600

Type

Specifies the displaytype. 0 NEC (FIPC8367 based) VFDs. 1 KD Rev 2.1. 2 Noritake VFDs (*). 3 Futaba VFDs 4 IEE S03601-95B 5 IEE S03601-96-080 (*) 6 Futaba NA202SD08FA (allmost IEE compatible) 7 Samsung 20S207DA4 and 20S207DA6 8 Nixdorf BA6x / VT100 (* most should work, not tested yet.) Optional. Type uniline.

0

use_parallel

"no" if display connected serial, "yes" if connected parallel. I.e. serial by default. Optional. Type uniline.

no

SEE ALSO

•
cme
2021-01-25 perl v5.32.0