.TH HACKRF_SWEEP "1" "July 2021" "hackrf_sweep" "User Commands"
.SH NAME
hackrf_sweep \- control frequency sweep of hackrf
.SH DESCRIPTION
hackrf_sweep
Usage:
.IP
[\-h] # this help
[\-d serial_number] # Serial number of desired HackRF
[\-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable
[\-f freq_min:freq_max] # minimum and maximum frequencies in MHz
[\-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable
[\-l gain_db] # RX LNA (IF) gain, 0\-40dB, 8dB steps
[\-g gain_db] # RX VGA (baseband) gain, 0\-62dB, 2dB steps
[\-n num_samples] # Number of samples per frequency, 8192\-4294967296
[\-w bin_width] # FFT bin width (frequency resolution) in Hz
[\-1] # one shot mode
[\-N num_sweeps] # Number of sweeps to perform
[\-B] # binary output
[\-I] # binary inverse FFT output
\fB\-r\fR filename # output file
.SS "Output fields:"
.IP
date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .
.SS "Usage:"
.IP
[\-h] # this help
[\-d serial_number] # Serial number of desired HackRF
[\-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable
[\-f freq_min:freq_max] # minimum and maximum frequencies in MHz
[\-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable
[\-l gain_db] # RX LNA (IF) gain, 0\-40dB, 8dB steps
[\-g gain_db] # RX VGA (baseband) gain, 0\-62dB, 2dB steps
[\-n num_samples] # Number of samples per frequency, 8192\-4294967296
[\-w bin_width] # FFT bin width (frequency resolution) in Hz
[\-1] # one shot mode
[\-N num_sweeps] # Number of sweeps to perform
[\-B] # binary output
[\-I] # binary inverse FFT output
\fB\-r\fR filename # output file
.SS "Output fields:"
.IP
date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .
.SH "SEE ALSO"
The primary source of documentation is the wiki on github:

https://github.com/mossmann/hackrf/wiki