Scroll to navigation

g.region(1grass) GRASS GIS User's Manual g.region(1grass)

NAME

g.region - Manages the boundary definitions for the geographic region.

KEYWORDS

general, settings, computational region, extent, resolution, level1

SYNOPSIS

g.region
g.region --help
g.region [-dsplectwmn3bgfauo] [region=name] [raster=name[,name,...]] [raster_3d=name] [vector=name[,name,...]] [n=value] [s=value] [e=value] [w=value] [t=value] [b=value] [rows=value] [cols=value] [res=value] [res3=value] [nsres=value] [ewres=value] [tbres=value] [zoom=name] [align=name] [grow=value] [save=name] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:


Set from default region

Save as default region
Only possible from the PERMANENT mapset

Print the current region

Print the current region in lat/long using the current ellipsoid/datum

Print the current region extent

Print the current region map center coordinates

Print the current region in GMT style

Print the current region in WMS style

Print region resolution in meters (geodesic)

Print the convergence angle (degrees CCW)
The difference between the projection’s grid north and true north, measured at the center coordinates of the current region.
-3

Print also 3D settings

Print the maximum bounding box in lat/long on WGS84

Print in shell script style

Print in shell script style, but in one line (flat)

Align region to resolution (default = align to bounds, works only for 2D resolution)

Do not update the current region

Force update of the current region

Allow output files to overwrite existing files

Print usage summary

Verbose module output

Quiet module output

Force launching GUI dialog

Parameters:


Set current region from named region

Set region to match raster map(s)

Set region to match 3D raster map(s) (both 2D and 3D values)

Set region to match vector map(s)

Value for the northern edge

Value for the southern edge

Value for the eastern edge

Value for the western edge

Value for the top edge

Value for the bottom edge

Number of rows in the new region

Number of columns in the new region

2D grid resolution (north-south and east-west)

3D grid resolution (north-south, east-west and top-bottom)

North-south 2D grid resolution

East-west 2D grid resolution

Top-bottom 3D grid resolution

Shrink region until it meets non-NULL data from this raster map

Adjust region cells to cleanly align with this raster map

Number of cells to add to each side of the current region extent
A negative number shrinks the current region extent

Save current region settings in named region file

DESCRIPTION

The g.region module allows the user to manage the settings of the current geographic region. These regional boundaries can be set by the user directly and/or set from a region definition file (stored under the windows directory in the user’s current mapset). The user can create, modify, and store as many geographic region definitions as desired for any given mapset. However, only one of these geographic region definitions will be current at any given moment, for a specified mapset; i.e., GRASS programs that respect the geographic region settings will use the current geographic region settings.

DEFINITIONS


In GRASS, a region refers to a geographic area with some defined boundaries, based on a specific map coordinate system and map projection. Each region also has associated with it the specific east-west and north-south resolutions of its smallest units (rectangular units called "cells").

The region’s boundaries are given as the northernmost, southernmost, easternmost, and westernmost points that define its extent (cell edges). The north and south boundaries are commonly called northings, while the east and west boundaries are called eastings.

The region’s cell resolution defines the size of the smallest piece of data recognized (imported, analyzed, displayed, stored, etc.) by GRASS modules affected by the current region settings. The north-south and east-west cell resolutions need not be the same, thus allowing non-square data cells to exist.

Typically all raster and display modules are affected by the current region settings, but not vector modules. Some special modules diverge from this rule, for example raster import modules and v.in.region.


Each GRASS project (previously called location) has a fixed geographic region, called the default geographic region (stored in the region file DEFAULT_WIND under the special mapset PERMANENT), that defines the extent of the data base. While this provides a starting point for defining new geographic regions, user-defined geographic regions need not fall within this geographic region. The current region can be reset to the default region with the -d flag. The default region is initially set when the project is first created and can be reset using the -s flag.

Each mapset has a current geographic region. This region defines the geographic area in which all GRASS displays and raster analyses will be done. Raster data will be resampled, if necessary, to meet the cell resolutions of the current geographic region setting.

Each GRASS MAPSET may contain any number of pre-defined, and named, geographic regions. These region definitions are stored in the user’s current mapset location under the windows directory (also referred to as the user’s saved region definitions). Any of these pre-defined geographic regions may be selected, by name, to become the current geographic region. Users may also access saved region definitions stored under other mapsets in the current project, if these mapsets are included in the user’s mapset search path or the ’@’ operator is used (region_name@mapset).

NOTES

After all updates have been applied, the current region’s southern and western boundaries are (silently) adjusted so that the north/south distance is a multiple of the north/south resolution and that the east/west distance is a multiple of the east/west resolution.

With the -a flag all four boundaries are adjusted to be even multiples of the resolution, aligning the region to the resolution supplied by the user. The default is to align the region resolution to match the region boundaries.

The -m flag will report the region resolution in meters. The resolution is calculated by averaging the resolution at the region boundaries. This resolution is calculated by dividing the geodesic distance in meters at the boundary by the number of rows or columns. For example the east / west resolution (ewres) is determined from an average of the geodesic distances at the North and South boundaries divided by the number of columns.

The -p (or -g) option is recognized last. This means that all changes are applied to the region settings before printing occurs.

The -g flag prints the current region settings in shell script style. This format can be given back to g.region on its command line. This may also be used to save region settings as shell environment variables with the UNIX eval command, "eval `g.region -g`".

With -u flag current region is not updated even if one or more options for changing region is used (res=, raster=, etc). This can be used for example to print modified region values for further use without actually modifying the current region. Similarly, -o flag forces to update current region file even when e.g., only printing was specified. Flag -o was added in GRASS GIS version 8 to simulate g.region behavior in prior versions when current region file was always updated unless -u was specified.

Additional parameter information:


Shrink current region settings to the smallest region encompassing all non-NULL data in the named raster map layer that fall inside the user’s current region. In this way you can tightly zoom in on isolated clumps within a bigger map.

If the user also includes the raster=name option on the command line, zoom=name will set the current region settings to the smallest region encompassing all non-NULL data in the named zoom map that fall inside the region stated in the cell header for the named raster map.


Set the current resolution equal to that of the named raster map, and align the current region to a row and column edge in the named map. Alignment only moves the existing region edges outward to the edges of the next nearest cell in the named raster map - not to the named map’s edges. To perform the latter function, use the raster=name option.

EXAMPLES

Printing extent and raster resolution in 2D and 3D

g.region -p

This will print the current region in the format:
projection: 1 (UTM)
zone:       13
datum:      nad27
ellipsoid:  clark66
north:      4928000
south:      4914000
west:       590000
east:       609000
nsres:      20
ewres:      20
rows:       700
cols:       950
    
g.region -p3

This will print the current region and the 3D region (used for voxels) in the format:
projection: 1 (UTM)
zone:       13
datum:      nad27
ellipsoid:  clark66
north:      4928000
south:      4914000
west:       590000
east:       609000
top:        1.00000000
bottom:     0.00000000
nsres:      20
nsres3:     20
ewres:      20
ewres3:     20
tbres:      1
rows:       700
rows3:      700
cols:       950
cols3:      950
depths:     1
    
g.region -g

The -g option prints the region in the following script style (key=value) format:
n=4928000
s=4914000
w=590000
e=609000
nsres=20
ewres=20
rows=700
cols=950
    
g.region -bg

The -bg option prints the region in the following script style (key=value) format plus the boundary box in latitude-longitude/WGS84:
n=4928000
s=4914000
w=590000
e=609000
nsres=20
ewres=20
rows=700
cols=950
LL_W=-103.87080682
LL_E=-103.62942884
LL_N=44.50164277
LL_S=44.37302019
    
g.region -l

The -l option prints the region in the following format:
long: -103.86789484 lat: 44.50165890 (north/west corner)
long: -103.62895703 lat: 44.49904013 (north/east corner)
long: -103.63190061 lat: 44.37303558 (south/east corner)
long: -103.87032572 lat: 44.37564292 (south/west corner)
rows:       700
cols:       950
Center longitude: 103:44:59.170374W [-103.74977]
Center latitude:  44:26:14.439781N [44.43734]
    
g.region -pm

This will print the current region in the format (latitude-longitude project):
projection: 3 (Latitude-Longitude)
zone:       0
ellipsoid:  wgs84
north:      90N
south:      40N
west:       20W
east:       20E
nsres:      928.73944902
ewres:      352.74269109
rows:       6000
cols:       4800
    
Note that the resolution is here reported in meters, not decimal degrees.

Changing extent and raster resolution using values

g.region n=7360100 e=699000

will reset the northing and easting for the current region, but leave the south edge, west edge, and the region cell resolutions unchanged.
g.region n=51:36:05N e=10:10:05E s=51:29:55N w=9:59:55E res=0:00:01

will reset the northing, easting, southing, westing and resolution for the current region, here in DMS latitude-longitude style (decimal degrees and degrees with decimal minutes can also be used).
g.region -dp s=698000

will set the current region from the default region for the GRASS project, reset the south edge to 698000, and then print the result.
g.region n=n+1000 w=w-500

The n=value may also be specified as a function of its current value: n=n+value increases the current northing, while n=n-value decreases it. This is also true for s=value, e=value, and w=value. In this example the current region’s northern boundary is extended by 1000 units and the current region’s western boundary is decreased by 500 units.
g.region n=s+1000 e=w+1000

This form allows the user to set the region boundary values relative to one another. Here, the northern boundary coordinate is set equal to 1000 units larger than the southern boundary’s coordinate value, and the eastern boundary’s coordinate value is set equal to 1000 units larger than the western boundary’s coordinate value. The corresponding forms s=n-value and

w=e-value may be used to set the values of the region’s southern and western boundaries, relative to the northern and eastern boundary values.

Changing extent and raster resolution using maps

g.region raster=soils

This form will make the current region settings exactly the same as those given in the cell header file for the raster map layer soils.
g.region raster=soils zoom=soils

This form will first look up the cell header file for the raster map layer soils, use this as the current region setting, and then shrink the region down to the smallest region which still encompasses all non-NULL data in the map layer soils. Note that if the parameter raster=soils were not specified, the zoom would shrink to encompass all non-NULL data values in the soils map that were located within the current region settings.
g.region -up raster=soils

The -u option suppresses the re-setting of the current region definition. This can be useful when it is desired to only extract region information. In this case, the cell header file for the soils map layer is printed without changing the current region settings.
g.region -up zoom=soils save=soils

This will zoom into the smallest region which encompasses all non-NULL soils data values, and save the new region settings in a file to be called soils and stored under the windows directory in the user’s current mapset. The current region settings are not changed.

Changing extent and raster resolution in 3D

g.region b=0 t=3000 tbres=200 res3=100 g.region -p3

This will define the 3D region for voxel computations. In this example a volume with bottom (0m) to top (3000m) at horizontal resolution (100m) and vertical resolution (200m) is defined.

Using g.region in a shell in combination with OGR

Extracting a spatial subset of the external vector map soils.shp into new external vector map soils_cut.shp using the OGR ogr2ogr tool:

eval `g.region -g`
ogr2ogr -spat $w $s $e $n soils_cut.shp soils.shp

This requires that the project and the SHAPE file CRS’ match.

Using g.region in a shell in combination with GDAL

Extracting a spatial subset of the external raster map p016r035_7t20020524_z17_nn30.tif into new external raster map p016r035_7t20020524_nc_spm_wake_nn30.tif using the GDAL gdalwarp tool:

eval `g.region -g`
gdalwarp -t_srs "`g.proj -wf`" -te $w $s $e $n \

p016r035_7t20020524_z17_nn30.tif \
p016r035_7t20020524_nc_spm_wake_nn30.tif

Here the input raster map does not have to match the project’s coordinate reference system since it is reprojected on the fly.

SEE ALSO

g.access, g.mapsets, g.proj
Environment variables: GRASS_REGION and WIND_OVERRIDE

AUTHOR

Michael Shapiro, U.S.Army Construction Engineering Research Laboratory

SOURCE CODE

Available at: g.region source code (history)

Accessed: Thursday Aug 01 05:16:06 2024

Main index | General index | Topics index | Keywords index | Graphical index | Full index

© 2003-2024 GRASS Development Team, GRASS GIS 8.4.0 Reference Manual

GRASS 8.4.0