Scroll to navigation

SBUF(9) Kernel Developer's Manual SBUF(9)

NAME

sbuf, sbuf_new, sbuf_new_auto, sbuf_new_for_sysctl, sbuf_clear, sbuf_get_flags, sbuf_set_flags, sbuf_clear_flags, sbuf_setpos, sbuf_bcat, sbuf_bcopyin, sbuf_bcpy, sbuf_cat, sbuf_copyin, sbuf_cpy, sbuf_printf, sbuf_vprintf, sbuf_putc, sbuf_set_drain, sbuf_trim, sbuf_error, sbuf_finish, sbuf_data, sbuf_len, sbuf_done, sbuf_delete, sbuf_start_section, sbuf_end_section, sbuf_hexdumpsafe string composition

SYNOPSIS

#include <sys/types.h>
#include <sys/sbuf.h>

typedef int (
sbuf_drain_func) (
void *arg, const char *data, int len);


struct sbuf *
sbuf_new(struct sbuf *s, char *buf, int length, int flags);

struct sbuf *
sbuf_new_auto();

void
sbuf_clear(struct sbuf *s);

int
sbuf_get_flags(struct sbuf *s);

void
sbuf_set_flags(struct sbuf *s, int flags);

void
sbuf_clear_flags(struct sbuf *s, int flags);

int
sbuf_setpos(struct sbuf *s, int pos);

int
sbuf_bcat(struct sbuf *s, const void *buf, size_t len);

int
sbuf_bcopyin(struct sbuf *s, const void *uaddr, size_t len);

int
sbuf_bcpy(struct sbuf *s, const void *buf, size_t len);

int
sbuf_cat(struct sbuf *s, const char *str);

int
sbuf_copyin(struct sbuf *s, const void *uaddr, size_t len);

int
sbuf_cpy(struct sbuf *s, const char *str);

int
sbuf_printf(struct sbuf *s, const char *fmt, ...);

int
sbuf_vprintf(struct sbuf *s, const char *fmt, va_list ap);

int
sbuf_putc(struct sbuf *s, int c);

void
sbuf_set_drain(struct sbuf *s, sbuf_drain_func *func, void *arg);

int
sbuf_trim(struct sbuf *s);

int
sbuf_error(struct sbuf *s);

int
sbuf_finish(struct sbuf *s);

char *
sbuf_data(struct sbuf *s);

ssize_t
sbuf_len(struct sbuf *s);

int
sbuf_done(struct sbuf *s);

void
sbuf_delete(struct sbuf *s);

void
sbuf_start_section(struct sbuf *s, ssize_t *old_lenp);

ssize_t
sbuf_end_section(struct sbuf *s, ssize_t old_len, size_t pad, int c);

void
sbuf_hexdump(struct sbuf *sb, void *ptr, int length, const char *hdr, int flags);

#include <sys/sysctl.h>

struct sbuf *
sbuf_new_for_sysctl(struct sbuf *s, char *buf, int length, struct sysctl_req *req);

DESCRIPTION

The sbuf family of functions allows one to safely allocate, compose and release strings in kernel or user space.

Instead of arrays of characters, these functions operate on structures called sbufs, defined in <sys/sbuf.h>.

Any errors encountered during the allocation or composition of the string will be latched in the data structure, making a single error test at the end of the composition sufficient to determine success or failure of the entire process.

The () function initializes the sbuf pointed to by its first argument. If that pointer is NULL, sbuf_new() allocates a struct sbuf using malloc(9). The buf argument is a pointer to a buffer in which to store the actual string; if it is NULL, sbuf_new() will allocate one using malloc(9). The length is the initial size of the storage buffer. The fourth argument, flags, may be comprised of the following flags:

The storage buffer is fixed at its initial size. Attempting to extend the sbuf beyond this size results in an overflow condition.
This indicates that the storage buffer may be extended as necessary, so long as resources allow, to hold additional data.
This causes the final nulterm byte to be counted in the length of the data.

Note that if buf is not NULL, it must point to an array of at least length characters. The result of accessing that array directly while it is in use by the sbuf is undefined.

The () function is a shortcut for creating a completely dynamic sbuf. It is the equivalent of calling sbuf_new() with values NULL, NULL, 0, and SBUF_AUTOEXTEND.

The () function will set up an sbuf with a drain function to use () when the internal buffer fills. Note that if the various functions which append to an sbuf are used while a non-sleepable lock is held, the user buffer should be wired using ().

The () function clears the sbuf and frees any memory allocated for it. There must be a call to sbuf_delete() for every call to sbuf_new(). Any attempt to access the sbuf after it has been deleted will fail.

The () function invalidates the contents of the sbuf and resets its position to zero.

The () function returns the current user flags. The () and sbuf_get_flags() functions set or clear one or more user flags, respectively. The user flags are described under the sbuf_new() function.

The () function sets the sbuf's end position to pos, which is a value between zero and one less than the size of the storage buffer. This effectively truncates the sbuf at the new position.

The () function appends the first len bytes from the buffer buf to the sbuf.

The () function copies len bytes from the specified userland address into the sbuf.

The () function replaces the contents of the sbuf with the first len bytes from the buffer buf.

The () function appends the NUL-terminated string str to the sbuf at the current position.

The () function sets a drain function func for the sbuf, and records a pointer arg to be passed to the drain on callback. The drain function cannot be changed while sbuf_len is non-zero.

The registered drain function sbuf_drain_func will be called with the argument arg provided to (), a pointer data to a byte string that is the contents of the sbuf, and the length len of the data. If the drain function exists, it will be called when the sbuf internal buffer is full, or on behalf of sbuf_finish(). The drain function may drain some or all of the data, but must drain at least 1 byte. The return value from the drain function, if positive, indicates how many bytes were drained. If negative, the return value indicates the negative error code which will be returned from this or a later call to sbuf_finish(). The returned drained length cannot be zero. To do unbuffered draining, initialize the sbuf with a two-byte buffer. The drain will be called for every byte added to the sbuf. The sbuf_bcopyin(), sbuf_copyin(), sbuf_trim(), and sbuf_data() functions cannot be used on an sbuf with a drain.

The () function copies a NUL-terminated string from the specified userland address into the sbuf. If the len argument is non-zero, no more than len characters (not counting the terminating NUL) are copied; otherwise the entire string, or as much of it as can fit in the sbuf, is copied.

The () function replaces the contents of the sbuf with those of the NUL-terminated string str. This is equivalent to calling sbuf_cat() with a fresh sbuf or one which position has been reset to zero with sbuf_clear() or sbuf_setpos().

The () function formats its arguments according to the format string pointed to by fmt and appends the resulting string to the sbuf at the current position.

The () function behaves the same as sbuf_printf() except that the arguments are obtained from the variable-length argument list ap.

The () function appends the character c to the sbuf at the current position.

The () function removes trailing whitespace from the sbuf.

The () function returns any error value that the sbuf may have accumulated, either from the drain function, or ENOMEM if the sbuf overflowed. This function is generally not needed and instead the error code from sbuf_finish() is the preferred way to discover whether an sbuf had an error.

The () function will call the attached drain function if one exists until all the data in the sbuf is flushed. If there is no attached drain, sbuf_finish() NUL-terminates the sbuf. In either case it marks the sbuf as finished, which means that it may no longer be modified using sbuf_setpos(), sbuf_cat(), sbuf_cpy(), sbuf_printf() or sbuf_putc(), until sbuf_clear() is used to reset the sbuf.

The () function returns the actual string; sbuf_data() only works on a finished sbuf. The () function returns the length of the string. For an sbuf with an attached drain, sbuf_len() returns the length of the un-drained data. () returns non-zero if the sbuf is finished.

The () and () functions may be used for automatic section alignment. The arguments pad and c specify the padding size and a character used for padding. The arguments old_lenp and old_len are to save and restore the current section length when nested sections are used. For the top level section NULL and -1 can be specified for old_lenp and old_len respectively.

The () function prints an array of bytes to the supplied sbuf, along with an ASCII representation of the bytes if possible. See the hexdump(3) man page for more details on the interface.

NOTES

If an operation caused an sbuf to overflow, most subsequent operations on it will fail until the sbuf is finished using sbuf_finish() or reset using sbuf_clear(), or its position is reset to a value between 0 and one less than the size of its storage buffer using sbuf_setpos(), or it is reinitialized to a sufficiently short string using sbuf_cpy().

Drains in user-space will not always function as indicated. While the drain function will be called immediately on overflow from the sbuf_putc, sbuf_bcat, sbuf_cat functions, sbuf_printf and sbuf_vprintf currently have no way to determine whether there will be an overflow until after it occurs, and cannot do a partial expansion of the format string. Thus when using libsbuf the buffer may be extended to allow completion of a single printf call, even though a drain is attached.

RETURN VALUES

The sbuf_new() function returns NULL if it failed to allocate a storage buffer, and a pointer to the new sbuf otherwise.

The sbuf_setpos() function returns -1 if pos was invalid, and zero otherwise.

The sbuf_cat(), sbuf_cpy(), sbuf_printf(), sbuf_putc(), and sbuf_trim() functions all return -1 if the buffer overflowed, and zero otherwise.

The sbuf_error() function returns a non-zero value if the buffer has an overflow or drain error, and zero otherwise.

The sbuf_len() function returns -1 if the buffer overflowed.

The sbuf_copyin() function returns -1 if copying string from userland failed, and number of bytes copied otherwise.

The sbuf_end_section() function returns the section length or -1 if the buffer has an error.

The sbuf_finish(9) function (the kernel version) returns ENOMEM if the sbuf overflowed before being finished, or returns the error code from the drain if one is attached.

The sbuf_finish(3) function (the userland version) will return zero for success and -1 and set errno on error.

EXAMPLES

#include <sys/sbuf.h>

struct sbuf *sb;

sb = sbuf_new_auto();
sbuf_cat(sb, "Customers found:\n");
TAILQ_FOREACH(foo, &foolist, list) {
	sbuf_printf(sb, "   %4d %s\n", foo->index, foo->name);
	sbuf_printf(sb, "      Address: %s\n", foo->address);
	sbuf_printf(sb, "      Zip: %s\n", foo->zipcode);
}
if (sbuf_finish(sb) != 0) /* Check for any and all errors */
	err(1, "Could not generate message");
transmit_msg(sbuf_data(sb), sbuf_len(sb));
sbuf_delete(sb);

SEE ALSO

hexdump(3), printf(3), strcat(3), strcpy(3), copyin(9), copyinstr(9), printf(9)

HISTORY

The sbuf family of functions first appeared in FreeBSD 4.4.

AUTHORS

The sbuf family of functions was designed by Poul-Henning Kamp <phk@FreeBSD.org> and implemented by Dag-Erling Smørgrav <des@FreeBSD.org>. Additional improvements were suggested by Justin T. Gibbs <gibbs@FreeBSD.org>. Auto-extend support added by Kelly Yancey <kbyanc@FreeBSD.org>. Drain functionality added by Matthew Fleming <mdf@FreeBSD.org>.

This manual page was written by Dag-Erling Smørgrav <des@FreeBSD.org>.

March 14, 2015 Debian