.\" .\" Copyright (c) 1994 Keith E. Walker .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: releng/11.1/share/man/man4/mcd.4 320954 2017-07-13 17:05:57Z jhb $ .\" .Dd July 8, 2017 .Dt MCD 4 .Os .Sh NAME .Nm mcd .Nd Mitsumi CD-ROM driver .Sh SYNOPSIS .Cd "device mcd" .Pp In .Pa /boot/device.hints : .Cd hint.mcd.0.at="isa" .Cd hint.mcd.0.port="0x300" .Cd hint.mcd.0.irq="10" .Sh DEPRECATION NOTICE The .Nm driver will be removed in .Fx 12.0 . .Sh DESCRIPTION The .Nm driver provides a data and audio interface to the Mitsumi-brand CD-ROM player. The CD-ROM player must be interfaced to the ISA bus through one of the Mitsumi proprietary controller boards. The controller boards supported are the LU002S, LU005S, the FX001 and the quite common FX001D. .Pp The .Nm driver responds to disk-specific .Fn ioctl commands, namely the .Dv DIOCGPART command. Other disk-specific .Fn ioctl commands will return an error. .Pp The .Nm driver also responds to special CD-ROM .Fn ioctl commands. These commands control the CD-ROM player's audio features. The commands are: .Pp .Bl -tag -width CDIOCREADSUBCHANNEL -compact -offset indent .It CDIOCREADSUBCHANNEL get sub-channel information on current status of disc playing .It CDIOCREADTOCHEADER get table of contents header .It CDIOCREADTOCENTRYS gets all of the table of contents .It CDIOCPLAYTRACKS begins audio playing at location specified .It CDIOCPLAYBLOCKS fails with error .Er EINVAL .It CDIOCPLAYMSF begins audio playing at location specified .It CDIOCRESUME resumes playing a previously paused disc .It CDIOCPAUSE pauses a playing disc .It CDIOCSTART begins playing a disc .It CDIOCSTOP stops a previously playing disc .It CDIOCEJECT opens the disc tray (there is no support for a corresponding un-eject command). .It CDIOCRESET stops any play and resets the Mitsumi controller board .It CDIOCSETDEBUG cause the kernel to print debug messages to the console about the .Nm driver .It CDIOCCLRDEBUG cause the kernel to quit printing debug messages about the .Nm driver .El .Pp The .Fn ioctl commands defined above are the only ones that the .Nm driver supports. There are other CD-ROM related .Fn ioctl commands (such as .Dv CDIOCSETVOL and .Dv CDIOCSETSTERIO ) which are available and may be supported by future versions of the driver. .Sh FILES .Bl -tag -width /dev/(r)mcd0a -compact .It Pa /dev/(r)mcd0a accesses .Bx partition on the disc. Normally, there is only one file system on a CD-ROM disc. .It Pa /dev/(r)mcd0c accesses raw device. .El .Sh NOTES The character-mode devices for the .Nm driver should only be used for accessing the audio features of the CD-ROM player as the performance on data is abysmal. .Pp The current version of the driver uses neither the DMA or IRQ features of the interface board, although it has an interrupt handler for any IRQ requests that are generated. Until the DMA features are supported, the only interrupts that the board generates are those that are not supported by the driver anyway. .Sh SEE ALSO .In sys/cdio.h .Sh HISTORY An .Nm driver appeared in .Fx 1.0 . .Sh AUTHORS .An -nosplit The driver was written by .An Holger Veit (data part) and .An Brian Moore (audio part). Changes were provided by .An Gary Clark II , .An Andrew A. Chernov , and .An Jordan K. Hubbard .