NAME¶cyclades-devices - tables for driving cyclades-serial-client
DESCRIPTION¶The cyclades-devices file supplies all mapping between Unix device files (/dev/*) and the addresses of serial ports of Cyclades Terminal Servers. It contains one entry for each serial port, with the following format:
Note: A # character at beginning of line indicates a comment
The entry fields are:
- - A full pathname of the file that will be associated to the serial port. It must start with a "/dev/" preffix. Two naming schemes may be used here: - devname does not exist, and will be linked to a free pseudo-tty. This is the default behavior of cyclades-ser-cli. - devname is the name of a valid slave pseudo-tty. In this case, the '-t 1' option must be assigned in options field. (Note: this option is not supported by this release).
- - Terminal Server type: - prts, for Cyclades Pr302X/TS Terminal Servers. - path, for Cyclades PathRAS Terminal Server.
- - Host Name or IP Address of the Terminal Server where the serial port resides.
- - Number of physical port in the Terminal Server. If treated as the IP address associated with this port, in a IP-based addressing scheme.
- - Server type that will be contacted to handle the serial port: - rtelnet, for Remote Telnet Server - socket, for Socket Server
- - Per-port specific options, passed to cyclades-ser-cli program.
EXAMPLES¶1. Device on a PR3020/TS Terminal Server pr3k Port 1, accessed through /dev/ctty01 device file name, using telnet protocol (remote telnet server)
2. The same device, but with an IP address pr3k_port1 associated to the serial port (IP-based port addressing)
3. Device on a PathRAS Terminal Server pr3k Port 2, accessed through /dev/ctty02 device file name, using socket protocol (socket server)