CUPT.CONF(5)

User Contributed Perl Documentation

CUPT.CONF(5)

NAME¶

cupt.conf - configuration file for Cupt

SYNOPSIS¶

$APT_CONFIG, /etc/apt/apt.conf, /etc/apt/apt.conf.d/*, $CUPT_PRE_CONFIG, /etc/cupt/pre.conf, /etc/cupt/cupt.conf, /etc/cupt/cupt.conf.d/*

DESCRIPTION¶

Cupt uses the same configuration syntax as apt.conf(5), which see.

CONFIGURATION VARIABLES¶

Firstly, Cupt uses following APT configuration variables:

acquire::*::dl-limit, acquire::*::timeout, acquire::*::proxy, acquire::http::allowredirect, acquire::retries, apt::cache::allversions, apt::cache::important, apt::cache::namesonly, apt::cache::recursedepends, apt::default-release, apt::install-recommends, apt::install-suggests, apt::neverautoremove, apt::get::assume-yes, apt::get::allowunauthenticated, apt::get::automaticremove, apt::get::list-cleanup, apt::get::purge, apt::update::pre-invoke, apt::update::post-invoke, apt::update::post-invoke-success, dir, dir::bin::dpkg, dir::cache, dir::cache::archives, dir::etc, dir::etc::sourcelist, dir::etc::sourceparts, dir::etc::parts, dir::etc::main, dir::etc::preferences, dir::ignore-files-silently, dir::state, dir::state::extendedstates, dir::state::status, dir::etc::trusted, dir::etc::trustedparts dpkg::options, dpkg::pre-invoke, dpkg::post-invoke, dpkg::pre-install-pkgs, quiet

See apt.conf(5) for their meanings.

Secondly, Cupt introduces cupt-specific configuration variables.

variable types¶

boolean: false may be specified as "0" or "false" or "no", everything else interpretes as true
if undefined, interpretes as false
integer: signed 32-bit integer on 32-bit systems, signed 64-bit integer on 64-bit systems
if undefined, interpretes as 0
string: interpreted as is
if undefined, interpretes as empty string
list: list of strings
if undefined, intepretes as empty list

variables¶

cupt::cache::limit-releases::by-*::type

string, determines the type of limiting repository releases to use

All repository indexes which are disallowed by this option are not added to the package cache, in other words, they are completely hidden.

'*' can be 'archive' or 'codename'

Possible values:

none: No limiting will be done for this category. The default.
include: Only values of the 'cupt::cache::limit-releases::by-*' option will be allowed.
exclude: Only values which are not present in the value of the 'cupt::cache::limit-releases::by-*' option will be allowed.

Example:

If you set 'cupt::cache::limit-releases::by-archive::type' to 'include' and 'cupt::cache::limit-releases::by-archive' to '{ "stable", "testing" };', only repositories with archive names 'stable' and 'testing' will be added to the cache.

cupt::cache::limit-releases::by-*: list of allowed/disallowed release attributes, see above
cupt::cache::pin::addendums::but-automatic-upgrades: integer, specifies priority change for versions that come only from sources which have both 'not automatic' and 'but automatic upgrades' flags. Defaults to 4200.
cupt::cache::pin::addendums::downgrade: integer, specifies priority change for versions that are smaller than currently installed. Defaults to -10000.
cupt::cache::pin::addendums::hold: integer, specifies priority increase for versions that are put on hold. Defaults to 1000000. Set this option to 0 if you do not want to obey holds. You may want to increase this option in (very unlikely to happen) situations: when you have thousands of manually installed packages and very large query; when you have a manually crafted pin priorities system with very large pin values.
cupt::cache::pin::addendums::not-automatic: integer, specifies priority increase for versions that come only from 'not automatic' sources. Defaults to -4000.
If you change the value of this option, you might want to change the value of the option "cupt::cache::pin::addendums::but-automatic-upgrades" accordingly.
cupt::cache::release-file-expiration::ignore: boolean, if set to true, Cupt will ignore the fact that a Release file is expired and use it anyway. False by default.
Warning! Setting this option to true will make the system vulnerable to a replay attack on package manager indexes.
cupt::console::allow-untrusted: boolean, don't treat using untrusted packages as dangerous action
cupt::console::assume-yes: boolean, see cupt(1) --assume-yes
cupt::console::actions-preview::package-indicators::manually-installed: boolean, whether to print "{m}" prefix for manually installed packages in non-color mode. Enabled by default.
cupt::console::actions-preview::package-indicators::automatically-installed: boolean, whether to print "{a}" prefix for automatically installed packages in non-color mode. Disabled by default.
cupt::console::actions-preview::show-not-preferred: string, determines whether packages which will have a not preferred version after the proposed changes are done should be shown in the actions preview. Defaults to 'for-upgrades'.
Possible values:

no: Do not show.
for-upgrades: Show for upgrade subcommands (namely, for "full-upgrade", "safe-upgrade" and the second part of "dist-upgrade").
yes: Show always.

cupt::console::actions-preview::show-archives

boolean, if true, release archive(s) will be shown for each package in the actions preview. False by default.

cupt::console::actions-preview::show-codenames

boolean, if true, release codename(s) will be shown for each package in the actions preview. False by default.

cupt::console::actions-preview::show-components

boolean, if true, release component(s) will be shown for each package in the actions preview. False by default.

cupt::console::actions-preview::show-details

boolean, if true, details of planned actions will be shown in the actions preview. True by default.

cupt::console::actions-preview::show-empty-versions

boolean, if true, empty versions (i.e. removed or not installed packages) will be shown as '<empty>' instead of being omitted

cupt::console::actions-preview::show-size-changes

boolean, if true, a change in the disk space usage will be shown for each package in the actions preview. False by default.

cupt::console::actions-preview::show-reasons

boolean, see cupt(1) --show-reasons

cupt::console::actions-preview::show-summary

string, tristate ("yes", "no" or "auto"), controls whether summary of planned actions will be shown in the actions preview or not. Defaults to "yes".

Currently, "auto" means that summary will be shown when there are >= 100 change entries in total.

cupt::console::actions-preview::show-versions

boolean, if true, a version will be shown for each package in the actions preview. False by default.

cupt::console::actions-preview::show-vendors

boolean, if true, a version will be shown for each package in the actions preview. False by default.

cupt::console::show-progress-messages

boolean, if true, package management actions will print stage messages ("Building a cache", "Resolving possible unmet dependencies" etc.). True by default.

cupt::console::use-colors

string, specifies whether to use colors in the console interface. Defaults to "auto".

For now concerns only the action preview.

Available values:

no: Don't use colors.
yes: Use colors.
auto: Use colors if the standard output is a terminal and a terminal type seem to allow colors.

cupt::console::warnings::removal-of-essential: boolean, treat removals of essential packages as dangerous action. True by default.
cupt::console::warnings::removal-of-important: boolean, treat removals of important packages as dangreous action. True by default.
cupt::directory: string, base directory for all cupt::directory::* options
cupt::directory::configuration: string, base directory for Cupt-specific configuration files
cupt::directory::configuration::main: string, relative file path for the Cupt main configuration file (same format as apt.conf(5))
cupt::directory::configuration::main-parts: string, relative directory path for additional Cupt configuration files (same format as apt.conf(5))
cupt::directory::configuration::pre: string, relative file path for the Cupt preconfiguration file which is read before paths of any other configuration files are calculated. This is the only place where one can effectively override default values of dir::etc and cupt::directory::configuration options and/or their suboptions. The environment variable CUPT_PRE_CONFIG overrides this option if defined.
cupt::directory::log: string, relative file path for the log file
cupt::directory::state: string, directory which contains Cupt state info
cupt::directory::state::lists: string, directory for repository indexes
cupt::downloader::max-simultaneous-downloads: integer, positive, specifies maximum number of simultaneous downloads. Defaults to 2.
cupt::downloader::protocols::protocol::priority: integer, positive, defines the priority of download protocol protocol, determines an order in which different URIs for the same file will be tried. Defaults to 100.
cupt::downloader::protocols::protocol::methods::method::priority: positive number, defines the priority of download method method, the method with maximum priority will be used for downloading the URI of protocol protocol. Defaults to 100.
cupt::downloader::protocols::protocol::methods: list, names of the methods available to download protocol protocol
cupt::languages::indexes: string, specifies localizations of what languages should be used for repository indexes. Defaults to "environment,en".
The value is comma-delimited (no spaces allowed) list of localization specificators. Localization specificator is either:

environment: A special string which is substituted by the current locale (precisely, by a value of the environment variable LC_MESSAGES).
none: A special string which indicates no localization.
language_code[_country_code]: A language code (for example: 'fi', 'fr', 'ru') or a language code with a country code (for example, 'pt_BR', 'zh_CN').

If the localization specificator contains a country code, the additional specificator without a country code will be implicitly used as fallback.

Localization specificators should be listed in the preference order. Duplicates are allowed but ignored.

Examples:

fi,ru,fr: Download Finnish, Russian and French translations. For every description, try to use Finnish translation; if it's not available, try to use Russian one; if it's also not available; try to use French one; else use an original one.
pt_BR: Download Portuguese (Brazil) and Portuguese localizations. Use Portuguese (Brazil) translation; if it's not available, use Portuguese translation; else use an original one.
de,environment,fr_FR: (Supposing LC_MESSAGES is 'pl_PL.UTF-8')
Download and use these translations, in the following order: German, Polish (Poland), Polish, French (France), French.

cupt::update::check-release-files

boolean, if set, Release files will be checked for the validity (including the expiration check and a signature if present) at the download stage. True by default.

cupt::update::compression-types::*::priority

integer, defines preference to download compressed files with higher priority first. 100 by default.

'*' can be 'gz', 'bz2', 'lzma', 'xz', and 'uncompressed'.

Set some option to <100 value to make it low-precedence than default, and >100 to make it high-precedence than default.

If some methods have the equal priority (which is the default setting), then files with smaller size with be chosen over the files with bigger size.

Example:

You have a low-speed CPU but rather high-speed internet connection and want to prefer gzip over lzma and lzma over bzip2. Then you have to set options like:

  cupt::update::compression-types
  {
    gz::priority "200";
    lzma::priority "150";
  }

Also, if you have a local mirror, which may store uncompressed indexes too (an official Debian archive doesn't store them), you may set also

cupt::update::compression-types::uncompressed::priority "300";

cupt::update::generate-index-of-index

boolean, specifies whether to build "index-of-index" for every Packages and Sources. If set to true, slightly increases the time of postprocessing after downloading new metadata files but speedes up significantly the initialization time for every invocation. True by default.

cupt::update::use-index-diffs

boolean, specifies whether to try downloading repository index deltas and apply them locally before downloading the full index. True by default.

When turned on, this option saves bandwidth but increases CPU and disk usage while updating. On the fast unlimited connections (say, >= 2 Mbit/s, but heavily depends on many other factors) you would likely want to turn off this option.

cupt::resolver::keep-recommends

boolean, specifies whether should resolver try to keep already installed recommended packages or not. True by default.

cupt::resolver::keep-suggests

boolean, specifies whether should resolver try to keep already installed suggested packages or not. False by default.

cupt::resolver::auto-remove

boolean, see cupt(1) --no-auto-remove

cupt::resolver::max-leaf-count

integer, specifies how many leaves the solution tree will grow before resolver will give up. -1 means infinite. -1 by default.

cupt::resolver::max-solution-count

integer, positive, see cupt(1) --max-solution-count

cupt::resolver::no-autoremove-if-rdepends-exist

list of regular expressions; if the package name matches to any of those regular expressions it will be not considered for auto-removal if there are any reverse dependencies installed. Empty by default.

Example (simplified real situation):

 Package: xserver-xorg
 Depends: xserver-xorg-video-all | xorg-driver-video
 
 Package: xserver-xorg-video-nv
 Provides: xorg-driver-video
 
 Package: xserver-xorg-video-radeon
 Provides: xorg-driver-video
 
 You have:
 xserver-xorg: manually installed
 xserver-xorg-video-all: not installed
 xserver-xorg-video-nv: automatically installed
 xserver-xorg-video-radeon: automatically installed

Both xserver-xorg-video-nv and xserver-xorg-video-radeon satisfy the dependency of xserver-xorg, so only one of them is needed in the system. Therefore, by default one of these two will be considered for auto-removal. If you add a regular expression 'xserver-xorg-video.*' to the value of this option, none of packages providing xorg-driver-video will be considered for auto-removal as long as xserver-xorg is installed.

cupt::resolver::no-remove

boolean, see cupt(1) --no-remove

cupt::resolver::synchronize-by-source-versions

string, this option controls whether and how the native resolver will attempt to keep all binary packages from the same source package at the same source version

This option uses the information from source packages. No synchronization will be performed for the versions which have not a corresponding source version in the repository.