Scroll to navigation

MEASURE(1) User Commands MEASURE(1)


Measure - Read Print Spot values.


Measure spot values, Version 1.6.3


spotread [-options] [logfile]

Verbose mode
Print spectrum for each reading
Plot spectrum for each reading
Set communication port from the following list (default 1)
** No ports found **
Use transmission measurement mode
Use emissive measurement mode (absolute results)
Use display white brightness relative measurement mode
Use display white point relative chromatically adjusted mode
Use telephoto measurement mode (absolute results)
Use projector white brightness relative measurement mode
Use projector white point relative chromatically adjusted mode
Use ambient measurement mode (absolute results)
Use ambient flash measurement mode (absolute results)
Set simulated instrument illumination using FWA (def -i illum): M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]
Choose illuminant for computation of CIE XYZ from spectral data & FWA: A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
Choose CIE Observer for spectral data or CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 (Choose FWA during operation)
Set filter configuration (if aplicable):
Polarising filter
U.V. Cut
Apply extra filter compensation file
Display Yxy instead of Lab
Display LCh instead of Lab
Show running average and std. devation from ref.
Display correlated color temperatures and CRI
Disable auto calibration of instrument
Start in high resolution spectrum mode (if available)
Apply Colorimeter Correction Matrix
Use Colorimeter Calibration Spectral Samples for calibration
Override refresh, non-refresh display mode
Override measured refresh rate with rate Hz
Use non-adaptive integration time mode (if available).
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
Print debug diagnostics to stderr
Optional file to save reading results as text
September 2014 spotread