Scroll to navigation

APT-LISTCHANGES(1) Debian APT-LISTCHANGES(1)

NOME

apt-listchanges - Mostra i nuovi elementi dello storico delle modifiche (changelog) estraendoli da pacchetti Debian

SINOSSI

apt-listchanges [[options...]] {[--apt] | [package.deb...]}

DESCRIZIONE

apt-listchanges è uno strumento per vedere quali modifiche sono state effettuate in una versione più recente di un pacchetto Debian rispetto alla versione presente sul sistema.

Le modifiche sono raccolte sia da NEWS.Debian che dai file changelog[.Debian] che solitamente si trovano in /usr/share/doc/pacchetto degli archivi dei pacchetti Debian.

Given a set of filenames as arguments (or read from apt when using --apt), apt-listchanges will scan the files (assumed to be Debian package archives) for the relevant changelog entries, and display them all in a summary grouped by source package. The groups are sorted by the urgency of the most urgent change, and than by the package name. Changes within each package group are displayed in the order of their apperance in the changelog files, i.e. starting from the latest to the oldest; the --reverse option can be used to alter this order.

OPZIONI

--apt

Legge i nomi dei file da una pipe con un formato speciale (fornita da apt) anziché dalla riga di comando e usa alcune opzioni nel file di configurazione specifiche per apt. Nella configurazione di apt deve essere specificato "version 2" come formato della pipe.

-v, --verbose

Mostra ulteriori (di solito inutili) informazioni. Per esempio visualizza un messaggio quando sta per essere installata la stessa versione o una più vecchia di un pacchetto oppure quando un pacchetto viene installato per la prima volta.

-f, --frontend

Seleziona l'interfaccia da usare per visualizzare le informazioni all'utente. Attualmente le interfacce sono:

pager

Uses sensible-pager(1) command to display output. The command uses PAGER environment variable to choose your favourite pager. The "pager" option may be specified in the configuration file to select a specific pager for use with apt-listchanges.

browser

Displays an HTML-formatted changelog with hyperlinks for bugs and email addresses using the sensible-browser(1) command that examines BROWSER environment variable to choose your favourite browser. The "browser" option may be specified in the configuration file to select a specific browser for use with apt-listchanges.

xterm-pager

Usa il paginatore preferito per mostrare l'output all'interno di un xterm (usando un x-terminal-emulator) separato. Questo permette di proseguire con l'aggiornamento e di continuare a vedere lo storico delle modifiche. Si può cambiare l'emulatore di terminale da usare tramite l'opzione «xterm» nel file di configurazione.

xterm-browser

La combinazione logica di xterm-pager e browser. Adatta solo ai browser testuali.

text

Trasferisce l'output su stdout, senza pause.

mail

Invia email all'indirizzo specificato con --email-address e non visualizza lo storico delle modifiche.

gtk

Spawns a gtk window to display the changelogs. Needs python3-gi to be installed.

none

Non fa nulla. Questa opzione può essere usata per evitare l'uso di apt-listchanges quando è già configurato per essere usato automaticamente da apt.

Please note that apt-listchanges will try to switch to an unprivileged user before spawning commands in "browser", "xterm-browser", and "xterm-pager" frontends. However this currently does not apply to the "pager" frontend. See also "ENVIRONMENT VARIABLES" below.

--email-address=indirizzo

Oltre che ad essere visualizzato, una copia dello storico delle modifiche è inviata all'indirizzo specificato. Per inviare solamente lo storico delle modifiche usare questa opzione con l'interfaccia mail.

--email-format={text|html}

If sending mail copies is enabled (see --email-address above), this option selects whether the mail should be sent as an old good plain text data (which is the default behavior), or as html data with clickable links, which might be more convenient for people using graphical mail clients.

-c, --confirm

Una volta visualizzato lo storico delle modifiche chiede all'utente se desidera proseguire. Se l'utente sceglie di non proseguire viene restituito all'uscita un valore non-nullo e apt verrà interrotto.

-a, --show-all

Anziché tentare di visualizzare gli elementi dello storico delle modifiche che sono più recenti della versione del pacchetto attualmente installato mostra tutti gli elementi dello storico delle modifiche per tutti i pacchetti. Questo permette di vedere l'intero storico delle modifiche di un .deb prima di estrarlo.

--save-seen=file

Questa opzione forzerà apt-listchanges a tener traccia dell'ultima versione di un pacchetto per la quale è stato mostrato lo storico delle modifiche in modo da evitare di mostrare nuovamente lo stesso storico delle modifiche nelle successive chiamate. Il database viene memorizzato nel file specificato. Specificare «none» per disattivare questa funzione.

--dump-seen

Display the contents of the seen database to standard output as a list of lines consisting of source package name and its latest seen version, separated by space. This option requires the path to the seen database to be known: please either specify it using --save-seen option or pass --profile=apt option to have it read from the configuration file.

--since=version

This option will cause apt-listchanges to show the entries later than the specified version. With this option, the only other argument you can pass is the path to a .deb file.

--which={news|changelogs|both}

Questa opzione seleziona cosa deve essere visualizzato fra notizie «news» (da NEWS.Debian e altre fonti), storico delle modifiche «changelogs» (da changelog.Debian e altre fonti) o entrambi «both». Il comportamento predefinito è mostrare solo le notizie.

--help

Visualizza informazioni sulla sintassi.

-h, --headers

Queste opzioni causano l'inserimento di una intestazione prima dello storico delle modifiche di ogni pacchetto che contiene il nome del pacchetto e il nome dei pacchetti binari che stanno per essere aggiornati (se più di uno o se diverso dal nome del pacchetto sorgente).

--debug

Visualizza alcune informazioni per il debug.

--profile=nome

Seleziona un profilo. nome corrisponde a una sezione nel file /etc/apt/listchanges.conf. Il valore predefinito è “apt” quando avviato da apt e “cmdline” negli altri casi.

--reverse

Show the changelog entries in reverse order.

--ignore-apt-assume, --ignore-debian-frontend

Disable forcing non-interactive frontend in some of the cases described in the "AUTOMATIC FRONTEND OVERRIDE" section below.

--select-frontend

Choose frontend interactively. This option is mainly for testing purposes, please do not use it.

AUTOMATIC FRONTEND OVERRIDE

For a better integration with existing package management tools, apt-listchanges tries to detect if package upgrades are done in a non-interactive way, and automatically switches its frontend to 'text' when any of the following conditions is satisfied:

•the standard output is not connected to terminal;

•the --quiet (-q) option is given to apt-get(8) (or aptitude(8)); note however that when the option is used more than once, apt-listchanges switches the frontend to 'mail';

•the --assume-yes (-y) option is given to apt-get(8);

•the DEBIAN_FRONTEND environment variable is set to "noninteractive", and APT_LISTCHANGES_FRONTED is not set.

For backward compatibility purposes the last two of the above checks can be disabled either with "ignore_apt_assume=true" or "ignore_debian_frontend=true" configuration file entries (see "CONFIGURATION FILE" below) or by using the command line options: --ignore-apt-assume or --ignore-debian-frontend.

Please also note that the "mail" frontend is already non-interactive one, so it is never switched to the "text" frontend.

Additionally apt-listchanges overrides X11-based frontends ("gtk", "xterm-pager", "xterm-browser") with "pager" (or "browser" in case of "xterm-browser") when the environment variable DISPLAY is not set.

CONFIGURATION FILE

apt-listchanges reads its configuration from the /etc/apt/listchanges.conf. The file consists of sections with names enclosed in the square brackets. Each section should contain lines in the key=value format. Lines starting with the "#" sign are treated as comments and ignored.

Section is a name of profile that can be used as parameter of the --profile option.

Key is a name of some command-line option (except for --apt, --profile, --help) with the initial hyphens removed, and the remaining hyphens translated to underscores, for example: "email_format" or "save_seen".

Value represents the value of the corresponding option. For command-line options that do not take argument, like "confirm" or "header", the value should be set either to "1", "yes", "true", and "on" in order to enable the option, or to "0", "no", "false", and "off" to disable it.

Additionally key can be one of the following keywords: "browser", "pager" or "xterm". The value of such configuration entry should be the name of an appropriate command, eventually followed by its arguments, for example: "pager=less -R".

Esempio 1. File di configurazione di esempio

[cmdline]
frontend=pager
[apt]
frontend=xterm-pager
email_address=root
confirm=1
[custom]
frontend=browser
browser=mozilla

Il precedente file di configurazione specifica che in modalità a riga di comando l'interfaccia predefinita deve essere pager; invece in modalità apt l'interfaccia predefinita è xterm-pager, una copia dei changelog (se presenti) deve essere inviata a root e apt-listchanges deve chiedere conferma. Se apt-listchanges è richiamato con --profile=custom, allora è usata l'interfaccia browser che utilizza mozilla.

AMBIENTE

APT_LISTCHANGES_FRONTEND

Interfaccia da usare.

APT_LISTCHANGES_USER, SUDO_USER, USERNAME

The value of the first existing of the above variables will be used as the name of user to switch to when running commands spawned by the "browser", "xterm-browser", and "xterm-pager" frontends if apt-listchanges is started by a privileged user.

DEBIAN_FRONTEND

If set to "noninteractive", then it can force apt-listchanges to use non-interactive frontend, see the "AUTOMATIC FRONTEND OVERRIDE" section for details.

BROWSER

Usata dall'interfaccia browser, deve essere impostata con un comando che si aspetti un URL file: di un file HTML da visualizzare.

PAGER

Used by the pager frontend.

APT_HOOK_INFO_FD

File descriptor to read package names from in the --apt mode. (Apt is expected to set this variable to a proper file descriptor number).

FILE

/etc/apt/listchanges.conf

Configuration file.

/etc/apt/apt.conf.d/20listchanges

File used for registering apt-listchanges into apt system.

/var/lib/apt/listchanges.db

Database usato per il "già-visto".

AUTORE

apt-listchanges è stato scritto da Matt Zimmerman <mdz@debian.org>

VEDERE ANCHE

sensible-pager(1), sensible-browser(1), apt-get(8), aptitude(8)

2016-12-12 apt-listchanges