wakeonlan - Perl script to wake up computers
wakeonlan [-h] [-v] [-i IP_address] [-p port] [-f file] [[hardware_address] ...]
This script sends 'magic packets' to wake-on-lan enabled ethernet adapters and
motherboards, in order to switch on the called PC. Be sure to connect the NIC
with the motherboard if neccesary, and enable the WOL function in the BIOS.
The 'magic packet' consists of 6 times 0xFF followed by 16 times the hardware
address of the NIC. This sequence can be encapsulated in any kind of packet.
This script uses UDP packets.
- Displays the help information.
- Displays the script version.
- -i ip_address
- Destination IP address. Unless you have static ARP tables
you should use some kind of broadcast address (the broadcast address of
the network where the computer resides or the limited broadcast address).
Default: 255.255.255.255 (the limited broadcast address).
- -p port
- Destination port. Default: 9 (the discard port).
- -f file
- File with hardware addresses of wakeable computers. For an
example check the file lab001.wol in the examples subdirectory.
Using the limited broadcast address (255.255.255.255):
$ wakeonlan 01:02:03:04:05:06
$ wakeonlan 01:02:03:04:05:06 01:02:03:04:05:07
Using a subnet broadcast address:
$ wakeonlan -i 192.168.1.255 01:02:03:04:05:06
Using another destination port:
$ wakeonlan -i 192.168.1.255 -p 1234 01:02:03:04:05:06
Using a file as source of hardware and IP addresses:
$ wakeonlan -f examples/lab001.wol
$ wakeonlan -f examples/lab001.wol 01:02:03:04:05:06
Jose Pedro Oliveira <firstname.lastname@example.org> maintaining and expanding original
work done by Ico Doornekamp <email@example.com>.
Copyright (c) 2000-2005 Jose Pedro Oliveira.
This is free software. You may modify it and distribute it under Perl's Artistic
Licence. Modified versions must be clearly indicated.
For more information regarding this script and Wakeonlan technology just check
the following address http://gsd.di.uminho.pt/jpo/software/wakeonlan/.