'\"
'\" Copyright (c) 1990-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
.TH pack 3tk 4.0 Tk "Tk Built-In Commands"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OOP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
pack \- Geometry manager that packs around edges of cavity
.SH SYNOPSIS
\fBpack \fIoption arg \fR?\fIarg ...\fR?
.BE

.SH DESCRIPTION
.PP
The \fBpack\fR command is used to communicate with the packer,
a geometry manager that arranges the children of a parent by
packing them in order around the edges of the parent.
The \fBpack\fR command can have any of several forms, depending
on the \fIoption\fR argument:
.TP
\fBpack \fIslave \fR?\fIslave ...\fR? ?\fIoptions\fR?
If the first argument to \fBpack\fR is a window name (any value
starting with
.QW . ),
then the command is processed in the same way as \fBpack configure\fR.
.TP
\fBpack configure \fIslave \fR?\fIslave ...\fR? ?\fIoptions\fR?
The arguments consist of the names of one or more slave windows
followed by pairs of arguments that specify how
to manage the slaves.
See \fBTHE PACKER ALGORITHM\fR below for details on how the options
are used by the packer.
The following options are supported:
.RS
.TP
\fB\-after \fIother\fR
\fIOther\fR must the name of another window.
Use its master as the master for the slaves, and insert
the slaves just after \fIother\fR in the packing order.
.TP
\fB\-anchor \fIanchor\fR
\fIAnchor\fR must be a valid anchor position such as \fBn\fR
or \fBsw\fR; it specifies where to position each slave in its
parcel.
Defaults to \fBcenter\fR.
.TP
\fB\-before \fIother\fR
\fIOther\fR must the name of another window.
Use its master as the master for the slaves, and insert
the slaves just before \fIother\fR in the packing order.
.TP
\fB\-expand \fIboolean\fR
Specifies whether the slaves should be expanded to consume
extra space in their master.
\fIBoolean\fR may have any proper boolean value, such as \fB1\fR
or \fBno\fR.
Defaults to 0.
.TP
\fB\-fill \fIstyle\fR
If a slave's parcel is larger than its requested dimensions, this
option may be used to stretch the slave.
\fIStyle\fR must have one of the following values:
.RS
.TP
\fBnone\fR
Give the slave its requested dimensions plus any internal padding
requested with \fB\-ipadx\fR or \fB\-ipady\fR.  This is the default.
.TP
\fBx\fR
Stretch the slave horizontally to fill the entire width of its
parcel (except leave external padding as specified by \fB\-padx\fR).
.TP
\fBy\fR
Stretch the slave vertically to fill the entire height of its
parcel (except leave external padding as specified by \fB\-pady\fR).
.TP
\fBboth\fR
Stretch the slave both horizontally and vertically.
.RE
.TP
\fB\-in \fIother\fR
Insert the slave(s) at the end of the packing order for the master
window given by \fIother\fR.
.TP
\fB\-ipadx \fIamount\fR
\fIAmount\fR specifies how much horizontal internal padding to
leave on each side of the slave(s).
\fIAmount\fR must be a valid screen distance, such as \fB2\fR or \fB.5c\fR.
It defaults to 0.
.TP
\fB\-ipady \fIamount\fR
\fIAmount\fR specifies how much vertical internal padding to
leave on each side of the slave(s).
\fIAmount\fR  defaults to 0.
.TP
\fB\-padx \fIamount\fR
\fIAmount\fR specifies how much horizontal external padding to
leave on each side of the slave(s).  \fIAmount\fR may be a list
of two values to specify padding for left and right separately.
\fIAmount\fR defaults to 0.
.TP
\fB\-pady \fIamount\fR
\fIAmount\fR specifies how much vertical external padding to
leave on each side of the slave(s).  \fIAmount\fR may be a list
of two values to specify padding for top and bottom separately.
\fIAmount\fR defaults to 0.
.TP
\fB\-side \fIside\fR
Specifies which side of the master the slave(s) will be packed against.
Must be \fBleft\fR, \fBright\fR, \fBtop\fR, or \fBbottom\fR.
Defaults to \fBtop\fR.
.LP
If no \fB\-in\fR, \fB\-after\fR or \fB\-before\fR option is specified
then each of the slaves will be inserted at the end of the packing list
for its parent unless it is already managed by the packer (in which
case it will be left where it is).
If one of these options is specified then all the slaves will be
inserted at the specified point.
If any of the slaves are already managed by the geometry manager
then any unspecified options for them retain their previous values rather
than receiving default values.
.RE
.TP
\fBpack forget \fIslave \fR?\fIslave ...\fR?
Removes each of the \fIslave\fRs from the packing order for its
master and unmaps their windows.
The slaves will no longer be managed by the packer.
.TP
\fBpack info \fIslave\fR
Returns a list whose elements are the current configuration state of
the slave given by \fIslave\fR in the same option-value form that
might be specified to \fBpack configure\fR.
The first two elements of the list are
.QW "\fB\-in \fImaster\fR"
where \fImaster\fR is the slave's master.
.TP
\fBpack propagate \fImaster\fR ?\fIboolean\fR?
If \fIboolean\fR has a true boolean value such as \fB1\fR or \fBon\fR
then propagation is enabled for \fImaster\fR, which must be a window
name (see \fBGEOMETRY PROPAGATION\fR below).
If \fIboolean\fR has a false boolean value then propagation is
disabled for \fImaster\fR.
In either of these cases an empty string is returned.
If \fIboolean\fR is omitted then the command returns \fB0\fR or
\fB1\fR to indicate whether propagation is currently enabled
for \fImaster\fR.
Propagation is enabled by default.
.TP
\fBpack slaves \fImaster\fR
Returns a list of all of the slaves in the packing order for \fImaster\fR.
The order of the slaves in the list is the same as their order in
the packing order.
If \fImaster\fR has no slaves then an empty string is returned.
.SH "THE PACKER ALGORITHM"
.PP
For each master the packer maintains an ordered list of slaves
called the \fIpacking list\fR.
The \fB\-in\fR, \fB\-after\fR, and \fB\-before\fR configuration
options are used to specify the master for each slave and the slave's
position in the packing list.
If none of these options is given for a slave then the slave
is added to the end of the packing list for its parent.
.PP
The packer arranges the slaves for a master by scanning the
packing list in order.
At the time it processes each slave, a rectangular area within
the master is still unallocated.
This area is called the \fIcavity\fR;  for the first slave it
is the entire area of the master.
.PP
For each slave the packer carries out the following steps:
.IP [1]
The packer allocates a rectangular \fIparcel\fR for the slave
along the side of the cavity given by the slave's \fB\-side\fR option.
If the side is top or bottom then the width of the parcel is
the width of the cavity and its height is the requested height
of the slave plus the \fB\-ipady\fR and \fB\-pady\fR options.
For the left or right side the height of the parcel is
the height of the cavity and the width is the requested width
of the slave plus the \fB\-ipadx\fR and \fB\-padx\fR options.
The parcel may be enlarged further because of the \fB\-expand\fR
option (see \fBEXPANSION\fR below)
.IP [2]
The packer chooses the dimensions of the slave.
The width will normally be the slave's requested width plus
twice its \fB\-ipadx\fR option and the height will normally be
the slave's requested height plus twice its \fB\-ipady\fR
option.
However, if the \fB\-fill\fR option is \fBx\fR or \fBboth\fR
then the width of the slave is expanded to fill the width of the parcel,
minus twice the \fB\-padx\fR option.
If the \fB\-fill\fR option is \fBy\fR or \fBboth\fR
then the height of the slave is expanded to fill the width of the parcel,
minus twice the \fB\-pady\fR option.
.IP [3]
The packer positions the slave over its parcel.
If the slave is smaller than the parcel then the \fB\-anchor\fR
option determines where in the parcel the slave will be placed.
If \fB\-padx\fR or \fB\-pady\fR is non-zero, then the given
amount of external padding will always be left between the
slave and the edges of the parcel.
.PP
Once a given slave has been packed, the area of its parcel
is subtracted from the cavity, leaving a smaller rectangular
cavity for the next slave.
If a slave does not use all of its parcel, the unused space
in the parcel will not be used by subsequent slaves.
If the cavity should become too small to meet the needs of
a slave then the slave will be given whatever space is
left in the cavity.
If the cavity shrinks to zero size, then all remaining slaves
on the packing list will be unmapped from the screen until
the master window becomes large enough to hold them again.
.SS "EXPANSION"
.PP
If a master window is so large that there will be extra space
left over after all of its slaves have been packed, then the
extra space is distributed uniformly among all of the slaves
for which the \fB\-expand\fR option is set.
Extra horizontal space is distributed among the expandable
slaves whose \fB\-side\fR is \fBleft\fR or \fBright\fR,
and extra vertical space is distributed among the expandable
slaves whose \fB\-side\fR is \fBtop\fR or \fBbottom\fR.
.SS "GEOMETRY PROPAGATION"
.PP
The packer normally computes how large a master must be to
just exactly meet the needs of its slaves, and it sets the
requested width and height of the master to these dimensions.
This causes geometry information to propagate up through a
window hierarchy to a top-level window so that the entire
sub-tree sizes itself to fit the needs of the leaf windows.
However, the \fBpack propagate\fR command may be used to
turn off propagation for one or more masters.
If propagation is disabled then the packer will not set
the requested width and height of the packer.
This may be useful if, for example, you wish for a master
window to have a fixed size that you specify.
.SH "RESTRICTIONS ON MASTER WINDOWS"
.PP
The master for each slave must either be the slave's parent
(the default) or a descendant of the slave's parent.
This restriction is necessary to guarantee that the
slave can be placed over any part of its master that is
visible without danger of the slave being clipped by its parent.
.SH "PACKING ORDER"
.PP
If the master for a slave is not its parent then you must make sure
that the slave is higher in the stacking order than the master.
Otherwise the master will obscure the slave and it will appear as
if the slave has not been packed correctly.
The easiest way to make sure the slave is higher than the master is
to create the master window first:  the most recently created window
will be highest in the stacking order.
Or, you can use the \fBraise\fR and \fBlower\fR commands to change
the stacking order of either the master or the slave.
.SH EXAMPLE
.CS
# Make the widgets
label .t \-text "This widget is at the top"    \-bg red
label .b \-text "This widget is at the bottom" \-bg green
label .l \-text "Left\enHand\enSide"
label .r \-text "Right\enHand\enSide"
text .mid
\&.mid insert end "This layout is like Java's BorderLayout"
# Lay them out
\fBpack\fR .t   \-side top    \-fill x
\fBpack\fR .b   \-side bottom \-fill x
\fBpack\fR .l   \-side left   \-fill y
\fBpack\fR .r   \-side right  \-fill y
\fBpack\fR .mid \-expand 1    \-fill both
.CE

.SH "SEE ALSO"
grid(3tk), place(3tk)

.SH KEYWORDS
geometry manager, location, packer, parcel, propagation, size