'\"
'\" Copyright (c) 1990-1992 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
.TH Tk_ParseArgv 3tk "" Tk "Tk Library Procedures"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OOP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
Tk_ParseArgv \- process command-line options
.SH SYNOPSIS
.nf
\fB#include <tk.h>\fR
.sp
int
\fBTk_ParseArgv\fR(\fIinterp, tkwin, argcPtr, argv, argTable, flags\fR)
.SH ARGUMENTS
.AS Tk_ArgvInfo *argTable
.AP Tcl_Interp *interp in
Interpreter to use for returning error messages.
.AP Tk_Window tkwin in
Window to use when arguments specify Tk options.  If NULL, then
no Tk options will be processed.
.AP int argcPtr in/out
Pointer to number of arguments in argv;  gets modified to hold
number of unprocessed arguments that remain after the call.
.AP "const char" **argv in/out
Command line arguments passed to main program.  Modified to
hold unprocessed arguments that remain after the call.
.AP Tk_ArgvInfo *argTable in
Array of argument descriptors, terminated by element with
type \fBTK_ARGV_END\fR.
.AP int flags in
If non-zero, then it specifies one or more flags that control the
parsing of arguments.  Different flags may be OR'ed together.
The flags currently defined are \fBTK_ARGV_DONT_SKIP_FIRST_ARG\fR,
\fBTK_ARGV_NO_ABBREV\fR, \fBTK_ARGV_NO_LEFTOVERS\fR, and
\fBTK_ARGV_NO_DEFAULTS\fR.
.BE
.SH DESCRIPTION
.PP
\fBTk_ParseArgv\fR processes an array of command-line arguments according
to a table describing the kinds of arguments that are expected.
Each of the arguments in \fIargv\fR is processed in turn:  if it matches
one of the entries in \fIargTable\fR, the argument is processed
according to that entry and discarded.  The arguments that do not
match anything in \fIargTable\fR are copied down to the beginning
of \fIargv\fR (retaining their original order) and returned to
the caller.  At the end of the call
\fBTk_ParseArgv\fR sets \fI*argcPtr\fR to hold the number of
arguments that are left in \fIargv\fR, and \fIargv[*argcPtr]\fR
will hold the value NULL.  Normally, \fBTk_ParseArgv\fR
assumes that \fIargv[0]\fR is a command name, so it is treated like
an argument that does not match \fIargTable\fR and returned to the
caller;  however, if the \fBTK_ARGV_DONT_SKIP_FIRST_ARG\fR bit is set in
\fIflags\fR then \fIargv[0]\fR will be processed just like the other
elements of \fIargv\fR.
.PP
\fBTk_ParseArgv\fR normally returns the value \fBTCL_OK\fR.  If an error
occurs while parsing the arguments, then \fBTCL_ERROR\fR is returned and
\fBTk_ParseArgv\fR will leave an error message in \fIinterp->result\fR
in the standard Tcl fashion.  In
the event of an error return, \fI*argvPtr\fR will not have been
modified, but \fIargv\fR could have been partially modified.  The
possible causes of errors are explained below.
.PP
The \fIargTable\fR array specifies the kinds of arguments that are
expected;  each of its entries has the following structure:
.CS
typedef struct {
    char *\fIkey\fR;
    int \fItype\fR;
    char *\fIsrc\fR;
    char *\fIdst\fR;
    char *\fIhelp\fR;
} Tk_ArgvInfo;
.CE
The \fIkey\fR field is a string such as
.QW \-display
or
.QW \-bg
that is compared with the values in \fIargv\fR.  \fIType\fR
indicates how to process an argument that matches \fIkey\fR
(more on this below).  \fISrc\fR and \fIdst\fR are additional
values used in processing the argument.  Their exact usage
depends on \fItype\fR, but typically \fIsrc\fR indicates
a value and \fIdst\fR indicates where to store the
value.  The \fBchar *\fR declarations for \fIsrc\fR and \fIdst\fR
are placeholders:  the actual types may be different.  Lastly,
\fIhelp\fR is a string giving a brief description
of this option;  this string is printed when users ask for help
about command-line options.
.PP
When processing an argument in \fIargv\fR, \fBTk_ParseArgv\fR
compares the argument to each of the \fIkey\fR's in \fIargTable\fR.
\fBTk_ParseArgv\fR selects the first specifier whose \fIkey\fR matches
the argument exactly, if such a specifier exists.  Otherwise
\fBTk_ParseArgv\fR selects a specifier for which the argument
is a unique abbreviation.  If the argument is a unique abbreviation
for more than one specifier, then an error is returned.  If there
is no matching entry in \fIargTable\fR, then the argument is
skipped and returned to the caller.
.PP
Once a matching argument specifier is found, \fBTk_ParseArgv\fR
processes the argument according to the \fItype\fR field of the
specifier.  The argument that matched \fIkey\fR is called
.QW "the matching argument"
in the descriptions below.  As part of the processing,
\fBTk_ParseArgv\fR may also use the next argument in \fIargv\fR
after the matching argument, which is called
.QW "the following argument" .
The legal values for \fItype\fR, and the processing
that they cause, are as follows:
.TP
\fBTK_ARGV_END\fR
Marks the end of the table.  The last entry in \fIargTable\fR
must have this type;  all of its other fields are ignored and it
will never match any arguments.
.TP
\fBTK_ARGV_CONSTANT\fR
\fISrc\fR is treated as an integer and \fIdst\fR is treated
as a pointer to an integer.  \fISrc\fR is stored at \fI*dst\fR.
The matching argument is discarded.
.TP
\fBTK_ARGV_INT\fR
The following argument must contain an
integer string in the format accepted by \fBstrtol\fR (e.g.
.QW 0
and
.QW 0x
prefixes may be used to specify octal or hexadecimal
numbers, respectively).  \fIDst\fR is treated as a pointer to an
integer;  the following argument is converted to an integer value
and stored at \fI*dst\fR.  \fISrc\fR is ignored.  The matching
and following arguments are discarded from \fIargv\fR.
.TP
\fBTK_ARGV_FLOAT\fR
The following argument must contain a floating-point number in
the format accepted by \fBstrtol\fR.
\fIDst\fR is treated as the address of a double-precision
floating point value;  the following argument is converted to a
double-precision value and stored at \fI*dst\fR.  The matching
and following arguments are discarded from \fIargv\fR.
.TP
\fBTK_ARGV_STRING\fR
In this form, \fIdst\fR is treated as a pointer to a (char *);
\fBTk_ParseArgv\fR stores at \fI*dst\fR a pointer to the following
argument, and discards the matching and following arguments from
\fIargv\fR.  \fISrc\fR is ignored.
.TP
\fBTK_ARGV_UID\fR
This form is similar to \fBTK_ARGV_STRING\fR, except that the argument
is turned into a Tk_Uid by calling \fBTk_GetUid\fR.
\fIDst\fR is treated as a pointer to a
Tk_Uid; \fBTk_ParseArgv\fR stores at \fI*dst\fR the Tk_Uid
corresponding to the following
argument, and discards the matching and following arguments from
\fIargv\fR.  \fISrc\fR is ignored.
.TP
\fBTK_ARGV_CONST_OPTION\fR
This form causes a Tk option to be set (as if the \fBoption\fR
command had been invoked).  The \fIsrc\fR field is treated as a
pointer to a string giving the value of an option, and \fIdst\fR
is treated as a pointer to the name of the option.  The matching
argument is discarded.  If \fItkwin\fR is NULL, then argument
specifiers of this type are ignored (as if they did not exist).
.TP
\fBTK_ARGV_OPTION_VALUE\fR
This form is similar to \fBTK_ARGV_CONST_OPTION\fR, except that the
value of the option is taken from the following argument instead
of from \fIsrc\fR.  \fIDst\fR is used as the name of the option.
\fISrc\fR is ignored.  The matching and following arguments
are discarded.  If \fItkwin\fR is NULL, then argument
specifiers of this type are ignored (as if they did not exist).
.TP
\fBTK_ARGV_OPTION_NAME_VALUE\fR
In this case the following argument is taken as the name of a Tk
option and the argument after that is taken as the value for that
option.  Both \fIsrc\fR and \fIdst\fR are ignored.  All three
arguments are discarded from \fIargv\fR.  If \fItkwin\fR is NULL,
then argument
specifiers of this type are ignored (as if they did not exist).
.TP
\fBTK_ARGV_HELP\fR
When this kind of option is encountered, \fBTk_ParseArgv\fR uses the
\fIhelp\fR fields of \fIargTable\fR to format a message describing
all the valid arguments.  The message is placed in \fIinterp->result\fR
and \fBTk_ParseArgv\fR returns \fBTCL_ERROR\fR.  When this happens, the
caller normally prints the help message and aborts.  If the \fIkey\fR
field of a \fBTK_ARGV_HELP\fR specifier is NULL, then the specifier will
never match any arguments;  in this case the specifier simply provides
extra documentation, which will be included when some other
\fBTK_ARGV_HELP\fR entry causes help information to be returned.
.TP
\fBTK_ARGV_REST\fR
This option is used by programs or commands that allow the last
several of their options to be the name and/or options for some
other program.  If a \fBTK_ARGV_REST\fR argument is found, then
\fBTk_ParseArgv\fR does not process any
of the remaining arguments;  it returns them all at
the beginning of \fIargv\fR (along with any other unprocessed arguments).
In addition, \fBTk_ParseArgv\fR treats \fIdst\fR as the address of an
integer value, and stores at \fI*dst\fR the index of the first of the
\fBTK_ARGV_REST\fR options in the returned \fIargv\fR.  This allows the
program to distinguish the \fBTK_ARGV_REST\fR options from other
unprocessed options that preceded the \fBTK_ARGV_REST\fR.
.TP
\fBTK_ARGV_FUNC\fR
For this kind of argument, \fIsrc\fR is treated as the address of
a procedure, which is invoked to process the following argument.
The procedure should have the following structure:
.RS
.CS
int
\fIfunc\fR(\fIdst\fR, \fIkey\fR, \fInextArg\fR)
    char *\fIdst\fR;
    char *\fIkey\fR;
    char *\fInextArg\fR;
{
}
.CE
The \fIdst\fR and \fIkey\fR parameters will contain the
corresponding fields from the \fIargTable\fR entry, and
\fInextArg\fR will point to the following argument from \fIargv\fR
(or NULL if there are not any more arguments left in \fIargv\fR).
If \fIfunc\fR uses \fInextArg\fR (so that
\fBTk_ParseArgv\fR should discard it), then it should return 1.  Otherwise it
should return 0 and \fBTkParseArgv\fR will process the following
argument in the normal fashion.  In either event the matching argument
is discarded.
.RE
.TP
\fBTK_ARGV_GENFUNC\fR
This form provides a more general procedural escape.  It treats
\fIsrc\fR as the address of a procedure, and passes that procedure
all of the remaining arguments.  The procedure should have the following
form:
.RS
.CS
int
\fIgenfunc\fR(dst, interp, key, argc, argv)
    char *\fIdst\fR;
    Tcl_Interp *\fIinterp\fR;
    char *\fIkey\fR;
    int \fIargc\fR;
    char **\fIargv\fR;
{
}
.CE
The \fIdst\fR and \fIkey\fR parameters will contain the
corresponding fields from the \fIargTable\fR entry.  \fIInterp\fR
will be the same as the \fIinterp\fR argument to \fBTcl_ParseArgv\fR.
\fIArgc\fR and \fIargv\fR refer to all of the options after the
matching one.  \fIGenfunc\fR should behave in a fashion similar
to \fBTk_ParseArgv\fR:  parse as many of the remaining arguments as it can,
then return any that are left by compacting them to the beginning of
\fIargv\fR (starting at \fIargv\fR[0]).  \fIGenfunc\fR
should return a count of how many arguments are left in \fIargv\fR;
\fBTk_ParseArgv\fR will process them.  If \fIgenfunc\fR encounters
an error then it should leave an error message in \fIinterp->result\fR,
in the usual Tcl fashion, and return \-1;  when this happens
\fBTk_ParseArgv\fR will abort its processing and return \fBTCL_ERROR\fR.
.RE
.SH "FLAGS"
.TP
\fBTK_ARGV_DONT_SKIP_FIRST_ARG\fR
\fBTk_ParseArgv\fR normally treats \fIargv[0]\fR as a program
or command name, and returns it to the caller just as if it
had not matched \fIargTable\fR.  If this flag is given, then
\fIargv[0]\fR is not given special treatment.
.TP
\fBTK_ARGV_NO_ABBREV\fR
Normally, \fBTk_ParseArgv\fR accepts unique abbreviations for
\fIkey\fR values in \fIargTable\fR.  If this flag is given then
only exact matches will be acceptable.
.TP
\fBTK_ARGV_NO_LEFTOVERS\fR
Normally, \fBTk_ParseArgv\fR returns unrecognized arguments to the
caller.  If this bit is set in \fIflags\fR then \fBTk_ParseArgv\fR
will return an error if it encounters any argument that does not
match \fIargTable\fR.  The only exception to this rule is \fIargv[0]\fR,
which will be returned to the caller with no errors as
long as \fBTK_ARGV_DONT_SKIP_FIRST_ARG\fR is not specified.
.TP
\fBTK_ARGV_NO_DEFAULTS\fR
Normally, \fBTk_ParseArgv\fR searches an internal table of
standard argument specifiers in addition to \fIargTable\fR.  If
this bit is set in \fIflags\fR, then \fBTk_ParseArgv\fR will
use only \fIargTable\fR and not its default table.
.SH EXAMPLE
.PP
Here is an example definition of an \fIargTable\fR and
some sample command lines that use the options.  Note the effect
on \fIargc\fR and \fIargv\fR;  arguments processed by \fBTk_ParseArgv\fR
are eliminated from \fIargv\fR, and \fIargc\fR
is updated to reflect reduced number of arguments.
.CS
/*
 * Define and set default values for globals.
 */
int debugFlag = 0;
int numReps = 100;
char defaultFileName[] = "out";
char *fileName = defaultFileName;
Boolean exec = FALSE;

/*
 * Define option descriptions.
 */
Tk_ArgvInfo argTable[] = {
    {"\-X", TK_ARGV_CONSTANT, (char *) 1, (char *) &debugFlag,
        "Turn on debugging printfs"},
    {"\-N", TK_ARGV_INT, (char *) NULL, (char *) &numReps,
        "Number of repetitions"},
    {"\-of", TK_ARGV_STRING, (char *) NULL, (char *) &fileName,
        "Name of file for output"},
    {"x", TK_ARGV_REST, (char *) NULL, (char *) &exec,
        "File to exec, followed by any arguments (must be last argument)."},
    {(char *) NULL, TK_ARGV_END, (char *) NULL, (char *) NULL,
        (char *) NULL}
};

main(argc, argv)
    int argc;
    char *argv[];
{
    \&...

    if (Tk_ParseArgv(interp, tkwin, &argc, argv, argTable, 0) != TCL_OK) {
        fprintf(stderr, "%s\en", interp->result);
        exit(1);
    }

    /*
     * Remainder of the program.
     */
}
.CE
.PP
Note that default values can be assigned to variables named in
\fIargTable\fR:  the variables will only be overwritten if the
particular arguments are present in \fIargv\fR.
Here are some example command lines and their effects.
.CS
prog \-N 200 infile        # just sets the numReps variable to 200
prog \-of out200 infile    # sets fileName to reference "out200"
prog \-XN 10 infile        # sets the debug flag, also sets numReps
.CE
In all of the above examples, \fIargc\fR will be set by \fBTk_ParseArgv\fR to 2,
\fIargv\fR[0] will be
.QW prog ,
\fIargv\fR[1] will be
.QW infile ,
and \fIargv\fR[2] will be NULL.
.SH KEYWORDS
arguments, command line, options