'\"
'\" Copyright (c) 1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
.TH pkg_mkIndex 3tcl 8.3 Tcl "Tcl Built-In Commands"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OOP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
pkg_mkIndex \- Build an index for automatic loading of packages
.SH SYNOPSIS
.nf
\fBpkg_mkIndex ?\fI\-direct\fR?  ?\fI\-lazy\fR?  ?\fI\-load pkgPat\fR? ?\fI\-verbose\fR? \fIdir\fR ?\fIpattern pattern ...\fR?
.fi
.BE
.SH DESCRIPTION
.PP
\fBPkg_mkIndex\fR is a utility procedure that is part of the standard
Tcl library.
It is used to create index files that allow packages to be loaded
automatically when \fBpackage require\fR commands are executed.
To use \fBpkg_mkIndex\fR, follow these steps:
.IP [1]
Create the package(s).
Each package may consist of one or more Tcl script files or binary files.
Binary files must be suitable for loading with the \fBload\fR command
with a single argument;  for example, if the file is \fBtest.so\fR it must
be possible to load this file with the command \fBload test.so\fR.
Each script file must contain a \fBpackage provide\fR command to declare
the package and version number, and each binary file must contain
a call to \fBTcl_PkgProvide\fR.
.IP [2]
Create the index by invoking \fBpkg_mkIndex\fR.
The \fIdir\fR argument gives the name of a directory and each
\fIpattern\fR argument is a \fBglob\fR-style pattern that selects
script or binary files in \fIdir\fR.
The default pattern is \fB*.tcl\fR and \fB*.[info sharedlibextension]\fR.
.RS
.PP
\fBPkg_mkIndex\fR will create a file \fBpkgIndex.tcl\fR in \fIdir\fR
with package information about all the files given by the \fIpattern\fR
arguments.
It does this by loading each file into a slave
interpreter and seeing what packages
and new commands appear (this is why it is essential to have
\fBpackage provide\fR commands or \fBTcl_PkgProvide\fR calls
in the files, as described above).
If you have a package split among scripts and binary files, 
or if you have dependencies among files,
you may have to use the \fB\-load\fR option
or adjust the order in which \fBpkg_mkIndex\fR processes
the files.  See \fBCOMPLEX CASES\fR below.
.RE
.IP [3]
Install the package as a subdirectory of one of the directories given by
the \fBtcl_pkgPath\fR variable.  If \fB$tcl_pkgPath\fR contains more
than one directory, machine-dependent packages (e.g., those that
contain binary shared libraries) should normally be installed
under the first directory and machine-independent packages (e.g.,
those that contain only Tcl scripts) should be installed under the
second directory.
The subdirectory should include
the package's script and/or binary files as well as the \fBpkgIndex.tcl\fR
file.  As long as the package is installed as a subdirectory of a
directory in \fB$tcl_pkgPath\fR it will automatically be found during
\fBpackage require\fR commands.
.RS
.PP
If you install the package anywhere else, then you must ensure that
the directory containing the package is in the \fBauto_path\fR global variable
or an immediate subdirectory of one of the directories in \fBauto_path\fR.
\fBAuto_path\fR contains a list of directories that are searched
by both the auto-loader and the package loader; by default it
includes \fB$tcl_pkgPath\fR.
The package loader also checks all of the subdirectories of the
directories in \fBauto_path\fR.
You can add a directory to \fBauto_path\fR explicitly in your
application, or you can add the directory to your \fBTCLLIBPATH\fR
environment variable:  if this environment variable is present,
Tcl initializes \fBauto_path\fR from it during application startup.
.RE
.IP [4]
Once the above steps have been taken, all you need to do to use a
package is to invoke \fBpackage require\fR.
For example, if versions 2.1, 2.3, and 3.1 of package \fBTest\fR
have been indexed by \fBpkg_mkIndex\fR, the command
\fBpackage require Test\fR will make version 3.1 available
and the command \fBpackage require \-exact Test 2.1\fR will
make version 2.1 available.
There may be many versions of a package in the various index files
in \fBauto_path\fR, but only one will actually be loaded in a given
interpreter, based on the first call to \fBpackage require\fR.
Different versions of a package may be loaded in different
interpreters.
.SH OPTIONS
The optional switches are:
.TP 15
\fB\-direct\fR
The generated index will implement direct loading of the package
upon \fBpackage require\fR.  This is the default.
.TP 15
\fB\-lazy\fR
The generated index will manage to delay loading the package until the
use of one of the commands provided by the package, instead of loading
it immediately upon \fBpackage require\fR.  This is not compatible with
the use of \fIauto_reset\fR, and therefore its use is discouraged.
.TP 15
\fB\-load \fIpkgPat\fR
The index process will pre-load any packages that exist in the
current interpreter and match \fIpkgPat\fR into the slave interpreter used to
generate the index.  The pattern match uses string match rules, but without
making case distinctions.
See COMPLEX CASES below.
.TP 15
\fB\-verbose\fR
Generate output during the indexing process.  Output is via
the \fBtclLog\fR procedure, which by default prints to stderr.
.TP 15
\fB\-\-\fR
End of the flags, in case \fIdir\fR begins with a dash.
.SH "PACKAGES AND THE AUTO-LOADER"
.PP
The package management facilities overlap somewhat with the auto-loader,
in that both arrange for files to be loaded on-demand.
However, package management is a higher-level mechanism that uses
the auto-loader for the last step in the loading process.
It is generally better to index a package with \fBpkg_mkIndex\fR
rather than \fBauto_mkindex\fR because the package mechanism provides
version control:  several versions of a package can be made available
in the index files, with different applications using different
versions based on \fBpackage require\fR commands.
In contrast, \fBauto_mkindex\fR does not understand versions so
it can only handle a single version of each package. 
It is probably not a good idea to index a given package with both
\fBpkg_mkIndex\fR and \fBauto_mkindex\fR.
If you use \fBpkg_mkIndex\fR to index a package, its commands cannot
be invoked until \fBpackage require\fR has been used to select a
version;  in contrast, packages indexed with \fBauto_mkindex\fR
can be used immediately since there is no version control.
.SH "HOW IT WORKS"
.PP
\fBPkg_mkIndex\fR depends on the \fBpackage unknown\fR command,
the \fBpackage ifneeded\fR command, and the auto-loader.
The first time a \fBpackage require\fR command is invoked,
the \fBpackage unknown\fR script is invoked.
This is set by Tcl initialization to a script that
evaluates all of the \fBpkgIndex.tcl\fR files in the
\fBauto_path\fR.
The \fBpkgIndex.tcl\fR files contain \fBpackage ifneeded\fR
commands for each version of each available package;  these commands
invoke \fBpackage provide\fR commands to announce the
availability of the package, and they setup auto-loader
information to load the files of the package.
If the \fI\-lazy\fR flag was provided when the \fBpkgIndex.tcl\fR
was generated,
a given file of a given version of a given package is not
actually loaded until the first time one of its commands
is invoked.
Thus, after invoking \fBpackage require\fR you may
not see the package's commands in the interpreter, but you will be able
to invoke the commands and they will be auto-loaded.
.SH "DIRECT LOADING"
.PP
Some packages, for instance packages which use namespaces and export
commands or those which require special initialization, might select
that their package files be loaded immediately upon \fBpackage require\fR
instead of delaying the actual loading to the first use of one of the
package's command. This is the default mode when generating the package
index.  It can be overridden by specifying the \fI\-lazy\fR argument.
.SH "COMPLEX CASES"
Most complex cases of dependencies among scripts
and binary files, and packages being split among scripts and
binary files are handled OK.  However, you may have to adjust
the order in which files are processed by \fBpkg_mkIndex\fR.
These issues are described in detail below.
.PP
If each script or file contains one package, and packages
are only contained in one file, then things are easy.
You simply specify all files to be indexed in any order
with some glob patterns.
.PP
In general, it is OK for scripts to have dependencies on other
packages.
If scripts contain \fBpackage require\fR commands, these are
stubbed out in the interpreter used to process the scripts,
so these do not cause problems.
If scripts call into other packages in global code,
these calls are handled by a stub \fBunknown\fR command.
However, if scripts make variable references to other package's
variables in global code, these will cause errors.  That is
also bad coding style.
.PP
If binary files have dependencies on other packages, things
can become tricky because it is not possible to stub out
C-level APIs such as \fBTcl_PkgRequire\fR API
when loading a binary file.
For example, suppose the BLT package requires Tk, and expresses
this with a call to \fBTcl_PkgRequire\fR in its \fBBlt_Init\fR routine.
To support this, you must run \fBpkg_mkIndex\fR in an interpreter that
has Tk loaded.  You can achieve this with the
\fB\-load \fIpkgPat\fR option.  If you specify this option,
\fBpkg_mkIndex\fR will load any packages listed by
\fBinfo loaded\fR and that match \fIpkgPat\fR
into the interpreter used to process files.
In most cases this will satisfy the \fBTcl_PkgRequire\fR calls
made by binary files.
.PP
If you are indexing two binary files and one depends on the other,
you should specify the one that has dependencies last.
This way the one without dependencies will get loaded and indexed,
and then the package it provides
will be available when the second file is processed.
You may also need to load the first package into the
temporary interpreter used to create the index by using
the \fB\-load\fR flag;
it will not hurt to specify package patterns that are not yet loaded.
.PP
If you have a package that is split across scripts and a binary file,
then you should avoid the \fB\-load\fR flag. The problem is that
if you load a package before computing the index it masks any
other files that provide part of the same package.
If you must use \fB\-load\fR,
then you must specify the scripts first; otherwise the package loaded from
the binary file may mask the package defined by the scripts.
.SH "SEE ALSO"
package(3tcl)
.SH KEYWORDS
auto-load, index, package, version