Scroll to navigation

IRPIPE(1) User Commands IRPIPE(1)

NAME

irpipe - tool to send data to lircd over /dev/irpipe kernel device.

SYNOPSIS

irpipe [options] <file

irpipe --read [options] >file

irpipe --filter [options] <infile >outfile

DESCRIPTION

irpipe is designed to feed data to lircd(8) over a /dev/irpipe device. It's a tool to enter test data to lircd in a way which is identical to real data from /dev/lirc devices.

irpipe uses two formats: text and binary. The binary format is documented in the lirc(4) manual page. The text format is as defined in mode2(1).

The irpipe driver allows user to set the features returned by the LIRC_GET_FEATURES ioctl. These are documented in lirc(4).

The irpipe kernel device is often not built in packaged lirc versions. See [KERNEL DRIVER] below.

OPTIONS

-d --device=driver
Set kernel device, default is /dev/irpipe0.
-b --bin2text
Convert binary data to text.
-t --text2bin
Convert text data to binary.
-s --add-sync
Add long initial sync on converted output. This is often required for lircd to be able to decode data, in particular if keys are not repeated.
-f --filter
Send data from stdin to stdout
-r --read
Send data from kernel device to stdout. This option is experimental and not tested.
-l--length=bits
Set kernel device signal length. This is only meaningful on LIRCCODE device emulation.
-F--features=bitmask
Set the features bitmask, as returned by the LIRC_GET_FEATURES ioctl. See lirc(4) for more.
-h --help
Display usage summary.
-v --version
Display version.

KERNEL DRIVER

The irpipe tool is designed to work with the irpipe kernel driver, although the --filter option works without it. This driver is often not built in packaged versions. If this is the case, the driver can be built from sources in the drivers/irpipe directory. This requires kernel sources installed. The drivers/irpipe/README provides information on building and installing the driver.

SEE ALSO

lircd(8)
lirc(4)
Last change: Aug 2015 irpipe 0.9.4c