Scroll to navigation

Config::Model::models::LCDd::glcd(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::glcd(3pm)

NAME

Config::Model::models::LCDd::glcd - Configuration class LCDd::glcd

DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

Elements

Brightness

Set brightness of the backlight if the backlight is switched 'on'. Optional. Type integer. upstream_default: '800'.

CellSize

Width and height of a character cell in pixels. This value is only used if the driver has been compiled with FreeType and it is enabled. Otherwise the default 6x8 cell is used. Optional. Type uniline. upstream_default: '12x16'.

ConnectionType

Select what type of connection. See documentation for types. Optional. Type uniline. default: 't6963'.

Contrast

Set the initial contrast if supported by connection type. Optional. Type integer. upstream_default: '600'.

KeyMap_A

Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'. By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape. Optional. Type uniline. default: 'Up'.

KeyMap_B

Optional. Type uniline. default: 'Down'.

KeyMap_C

Optional. Type uniline. default: 'Enter'.

KeyMap_D

Optional. Type uniline. default: 'Escape'.

KeyRepeatDelay

Time (ms) from first key report to first repeat. Set to 0 to disable repeated key reports. Optional. Type integer. upstream_default: '500'.

KeyRepeatInterval

Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled (set to zero). Optional. Type integer. upstream_default: '300'.

OffBrightness

Set brightness of the backlight if the backlight is switched 'off'. Set this to zero to completely turn off the backlight. Optional. Type integer. upstream_default: '100'.

Port

--- t6963 options --- Parallel port to use legal: 0x200-0x400 Optional. Type uniline. upstream_default: '0x378'.

Size

Width and height of the display in pixel. The supported sizes may depend on the ConnectionType. legal: 1x1-640x480 Optional. Type uniline. upstream_default: '128x64'.

bidirectional

Use LPT port in bi-directional mode. This should work on most LPT port and is required for proper timing! Optional. Type boolean. upstream_default: 'yes'.

delayBus

Insert additional delays into reads / writes. Optional. Type boolean. upstream_default: 'no'.

fontHasIcons

Some fonts miss the Unicode characters used to represent icons. In this case the built-in 5x8 font can used if this option is turned off. Optional. Type boolean. upstream_default: 'yes'.

normal_font

Path to font file to use for FreeType rendering. This font must be monospace and should contain some special Unicode characters like arrows (Andale Mono is recommended and can be fetched at http://corefonts.sf.net). Optional. Type uniline. upstream_default: '/usr/local/lib/X11/fonts/TTF/andalemo.ttf'.

picolcdgfx_Inverted

Inverted: Inverts the pixels. Optional. Type enum. choice: 'yesorno'. upstream_default: 'no'.

picolcdgfx_KeyTimeout

--- picolcdgfx options --- Time in ms for usb_read to wait on a key press. Optional. Type integer. upstream_default: '125'.

serdisp_device

The display device to use, e.g. serraw:/dev/ttyS0, parport:/dev/parport0 or USB:07c0/1501. Optional. Type uniline. default: '/dev/ppi0'.

serdisp_name

--- serdisplib options --- Name of the underlying serdisplib driver, e.g. ctinclud. See serdisplib documentation for details. Optional. Type uniline. default: 't6963'.

serdisp_options

Options string to pass to serdisplib during initialization. Use this to set any display related options (e.g. wiring). The display size is always set based on the Size configured above! By default, no options are set. Important: The value must be quoted as it contains equal signs! Optional. Type uniline. upstream_default: 'INVERT=1'.

useFT2

If LCDproc has been compiled with FreeType 2 support this option can be used to turn if off intentionally. Optional. Type boolean. upstream_default: 'yes'.

x11_BacklightColor

BacklightColor: The color of the backlight as full brightness. Optional. Type uniline. upstream_default: '0x80FF80'.

x11_Border

Border: Adds a border (empty space) around the LCD portion of X11 window. Optional. Type uniline. upstream_default: '20'.

x11_Inverted

Inverted: inverts the pixels Optional. Type boolean. upstream_default: 'no'.

x11_PixelColor

Colors are in RRGGBB format prefixed with "0x". PixelColor: The color of each dot at full contrast. Optional. Type uniline. upstream_default: '0x000000'.

x11_PixelSize

--- x11 options --- PixelSize is size of each dot in pixels + a pixel gap. Optional. Type uniline. upstream_default: '3+1'.

SEE ALSO

•
cme
2016-09-23 perl v5.22.2