ADV(4) | Device Drivers Manual | ADV(4) |
NAME¶
adv
—
SYNOPSIS¶
To compile this driver into the kernel, place the following lines in your kernel configuration file:device scbus
device adv
For one or more EISA cards:
device eisa
For one or more VL/ISA cards:
device isa
In /boot/device.hints:
hint.adv.0.at="isa"
For one or more PCI cards:
device pci
DESCRIPTION¶
This driver provides access to the 8bit SCSI bus connected to the Advanced Systems Products, Inc. ASC900, ASC1000, ASC1090, ASC1200, ASC3030, ASC3050, and ASC3150 host adapter chips. The following tables list the AdvanSys products using these chips, their bus attachment type, maximum sync rate, and the maximum number of commands that can be handled by the adapter concurrently.Adapter | Bus | Floppy | MaxSync | Commands | Footnotes |
ABP510/5150 | ISA | No | 10MHz | 240 | 1 |
ABP5140 | ISA PnP | No | 10MHz | 16 | 1, 3 |
ABP5142 | ISA PnP | Yes | 10MHz | 16 | 4 |
ABP[3]902 | PCI | No | 10MHz | 16 | |
ABP3905 | PCI | No | 10MHz | 16 | |
ABP915 | PCI | No | 10MHz | 16 | |
ABP920 | PCI | No | 10MHz | 16 | |
ABP3922 | PCI | No | 10MHz | 16 | |
ABP3925 | PCI | No | 10MHz | 16 | |
ABP930 | PCI | No | 10MHz | 16 | 5 |
ABP930U | PCI | No | 20MHz | 16 | |
ABP930UA | PCI | No | 20MHz | 16 | |
ABP960 | PCI | No | 10MHz | 16 | |
ABP960U | PCI | No | 20MHz | 16 |
Footnotes:
- This board has been shipped by HP with the 4020i CD-R drive. The board has no BIOS so it cannot control a boot device, but it can control any secondary SCSI device.
- This board has been sold by Iomega as a Jaz Jet PCI adapter.
- This board has been sold by SIIG as the i540 SpeedMaster.
- This board has been sold by SIIG as the i542 SpeedMaster.
- This board has been sold by SIIG as the Fast SCSI Pro PCI.
Adapter | Bus | Floppy | MaxSync | Commands |
ABP542 | ISA | Yes | 10MHz | 240 |
ABP742 | EISA | Yes | 10MHz | 240 |
ABP842 | VL | Yes | 10MHz | 240 |
ABP940 | PCI | No | 10MHz | 240 |
ABP[3]940UA | PCI | No | 20MHz | 240 |
ABP940U | PCI | No | 20MHz | 240 |
ABP3960UA | PCI | No | 20MHz | 240 |
ABP970 | PCI | No | 10MHz | 240 |
ABP970U | PCI | No | 20MHz | 240 |
Adapter | Bus | Floppy | MaxSync | Commands | Channels |
ABP752 | EISA | Yes | 10MHz | 240 | 2 |
ABP852 | VL | Yes | 10MHz | 240 | 2 |
ABP950 | PCI | No | 10MHz | 240 | 2 |
ABP980 | PCI | No | 10MHz | 240 | 4 |
ABP980U | PCI | No | 20MHz | 240 | 4 |
ABP[3]980UA | PCI | No | 20MHz | 16 | 4 |
Per target configuration performed in the AdvanceWare menu, which is accessible at boot, is honored by this driver. This includes synchronous/asynchronous transfers, maximum synchronous negotiation rate, disconnection, tagged queueing, and the host adapter's SCSI ID. The global setting for the maximum number of tagged transactions allowed per target is not honored as the CAM SCSI system will automatically determine the maximum number of tags a device can receive as well as guarantee fair resource allocation among devices.
HARDWARE¶
Theadv
driver supports the following SCSI controllers:
- AdvanSys ABP510/5150
- AdvanSys ABP5140
- AdvanSys ABP5142
- AdvanSys ABP902/3902
- AdvanSys ABP3905
- AdvanSys ABP915
- AdvanSys ABP920
- AdvanSys ABP3922
- AdvanSys ABP3925
- AdvanSys ABP930, ABP930U, ABP930UA
- AdvanSys ABP960, ABP960U
- AdvanSys ABP542
- AdvanSys ABP742
- AdvanSys ABP842
- AdvanSys ABP940
- AdvanSys ABP940UA/3940UA
- AdvanSys ABP940U
- AdvanSys ABP3960UA
- AdvanSys ABP970, ABP970U
- AdvanSys ABP752
- AdvanSys ABP852
- AdvanSys ABP950
- AdvanSys ABP980, ABP980U
- AdvanSys ABP980UA/3980UA
- MELCO IFC-USP (PC-98)
- RATOC REX-PCI30 (PC-98)
- @Nifty FNECHARD IFC-USUP-TX (PC-98)
SEE ALSO¶
adw(4), aha(4), ahb(4), ahc(4), cd(4), da(4), sa(4), scsi(4)HISTORY¶
Theadv
driver appeared in FreeBSD
3.0.
AUTHORS¶
Theadv
driver was ported by Justin T.
Gibbs from the Linux driver written by Bob Frey
of Advanced System Products, Inc. Many thanks to AdvanSys for providing the
original driver under a suitable license for use in
FreeBSD.
August 8, 2004 | Linux 4.9.0-9-amd64 |