dpkg-buildpackage - build binary or source packages from sources
is a program that automates the process of building a
Debian package. It consists of the following steps:
- It prepares the build environment by setting various
environment variables (see ENVIRONMENT), runs the init hook,
and calls dpkg-source --before-build (unless -T or
--target has been used).
- It checks that the build-dependencies and build-conflicts
are satisfied (unless -d or --no-check-builddeps is
- If one or more specific targets have been selected with the
-T or --target option, it calls those targets and stops
here. Otherwise it runs the preclean hook and calls fakeroot
debian/rules clean to clean the build-tree (unless -nc or
--no-pre-clean is specified).
- It runs the source hook and calls dpkg-source
-b to generate the source package (if a source build has been
requested with --build or equivalent options).
- It runs the build hook and calls debian/rules
build-target, then runs the binary hook followed by
fakeroot debian/rules binary-target (unless a source-only
build has been requested with --build=source or equivalent
options). Note that build-target and binary-target are
either build and binary (default case, or if an any
and all build has been requested with --build or equivalent
options), or build-arch and binary-arch (if an any
and not all build has been requested with --build or
equivalent options), or build-indep and binary-indep (if an
all and not any build has been requested with --build
or equivalent options).
- Unless a source-only build has been requested, it runs the
buildinfo hook and calls dpkg-genbuildinfo to generate a
.buildinfo file. Several dpkg-buildpackage options are
forwarded to dpkg-genbuildinfo.
- It runs the changes hook and calls
dpkg-genchanges to generate a .changes file. The name of the
.changes file will depend on the type of build and will be as
specific as necessary but not more; for a build that includes any
the name will be
or otherwise for a build that includes all the name will be
_source-version_all.changes, or otherwise for
a build that includes source the name will be
dpkg-buildpackage options are forwarded to
- It runs the postclean hook and if -tc or
--post-clean is specified, it will call fakeroot debian/rules
- It calls dpkg-source --after-build.
- It runs the check hook and calls a package checker
for the .changes file (if a command is specified in
DEB_CHECK_COMMAND or with --check-command).
- It runs the sign hook and calls gpg2 or
gpg (as long as it is not an UNRELEASED build, or --no-sign
is specified) to sign the .dsc file (if any, unless -us or
--unsigned-source is specified), the .buildinfo file (unless
-ui, --unsigned-buildinfo, -uc or
--unsigned-changes is specified) and the .changes file
(unless -uc or --unsigned-changes is specified).
- It runs the done hook.
All long options can be specified both on the command line and in the
system and user configuration files. Each line in the
configuration file is either an option (exactly the same as the command line
option but without leading hyphens) or a comment (if it starts with a ‘
- Specifies the build type from a comma-separated list
of components (since dpkg 1.18.5). Passed to dpkg-genchanges.
The allowed values are:
- Builds the source package. Note: when using this value
standalone and if what you want is simply to (re-)build the source
package, using dpkg-source is always better as it does not require
any build dependencies to be installed to be able to call the clean
- Builds the architecture specific binary packages.
- Builds the architecture independent binary packages.
- Builds the architecture specific and independent binary
packages. This is an alias for any,all.
- Builds everything. This is an alias for
source,any,all, and the same as the default case when no build
option is specified.
- Equivalent to --build=source,all (since dpkg
- Equivalent to --build=source,any (since dpkg
- Equivalent to --build=binary or
- Equivalent to --build=any.
- Equivalent to --build=all.
- Equivalent to --build=source.
- Equivalent to --build=full,
--build=source,binary or --build=source,any,all (since dpkg
- --target target[,...] -T,
--rules-target=target[,...] Calls debian/rules
target once per target specified, after having setup the build
environment (except for calling dpkg-source --before-build), and
stops the package build process here (since dpkg 1.15.0, long option since
dpkg 1.18.8, multi-target support since dpkg 1.18.16). If --as-root
is also given, then the command is executed as root (see
--root-command). Note that known targets that are required to be
run as root do not need this option (i.e. the clean, binary,
binary-arch and binary-indep targets).
- Only meaningful together with --target (since dpkg
1.15.0). Requires that the target be run with root rights.
- -sa -sd -vversion
--build-by=maintainer-address Passed unchanged to
dpkg-genchanges. See its manual page.
- -a, --host-arch architecture
- Specify the Debian architecture we build for (long option
since dpkg 1.17.17). The architecture of the machine we build on is
determined automatically, and is also the default for the host
- -t, --host-type gnu-system-type
- Specify the GNU system type we build for (long option since
dpkg 1.17.17). It can be used in place of --host-arch or as a
complement to override the default GNU system type of the host Debian
- --target-arch architecture
- Specify the Debian architecture the binaries built will
build for (since dpkg 1.17.17). The default value is the host
- --target-type gnu-system-type
- Specify the GNU system type the binaries built will build
for (since dpkg 1.17.17). It can be used in place of --target-arch
or as a complement to override the default GNU system type of the target
- Specify the profile(s) we build, as a comma-separated list
(since dpkg 1.17.2, long option since dpkg 1.18.8). The default behavior
is to build for no specific profile. Also sets them (as a space separated
list) as the DEB_BUILD_PROFILES environment variable which allows,
for example, debian/rules files to use this information for
- -j, --jobs[=jobs|auto]
- Number of jobs allowed to be run simultaneously, number of
jobs matching the number of online processors if auto is specified
(since dpkg 1.17.10), or unlimited number if jobs is not specified,
equivalent to the make(1) option of the same name (since dpkg
1.14.7, long option since dpkg 1.18.8). Will add itself to the
MAKEFLAGS environment variable, which should cause all subsequent
make invocations to inherit the option, thus forcing the parallel setting
on the packaging (and possibly the upstream build system if that uses
make) regardless of their support for parallel builds, which might cause
build failures. Also adds parallel=jobs or parallel
to the DEB_BUILD_OPTIONS environment variable which allows
debian/rules files to use this information for their own purposes. The
-j value will override the parallel=jobs or
parallel option in the DEB_BUILD_OPTIONS environment
variable. Note that the auto value will get replaced by the actual
number of currently active processors, and as such will not get propagated
to any child process. If the number of online processors cannot be
inferred then the code will fallback to using serial execution (since dpkg
1.18.15), although this should only happen on exotic and unsupported
- -J, --jobs-try[=jobs|auto]
- This option (since dpkg 1.18.2, long option since dpkg
1.18.8) is equivalent to the -j option except that it does not set
the MAKEFLAGS environment variable, and as such it is safer to use
with any package including those that are not parallel-build safe.
auto is the default behavior (since dpkg 1.18.11). Setting the
number of jobs to 1 will restore a serial behavior.
- -D, --check-builddeps
- Check build dependencies and conflicts; abort if
unsatisfied (long option since dpkg 1.18.8). This is the default
- -d, --no-check-builddeps
- Do not check build dependencies and conflicts (long option
since dpkg 1.18.8).
- Do not check built-in build dependencies and conflicts
(since dpkg 1.18.2). These are the distribution specific implicit build
dependencies usually required in a build environment, the so called
Build-Essential package set.
- -nc, --no-pre-clean
- Do not clean the source tree (long option since dpkg
1.18.8). Implies -b if nothing else has been selected among
-F, -g, -G, -B, -A or -S.
Implies -d with -S (since dpkg 1.18.0).
- Clean the source tree before building (since dpkg
- -tc, --post-clean
- Clean the source tree (using gain-root-command
debian/rules clean) after the package has been built (long option
since dpkg 1.18.8).
- When dpkg-buildpackage needs to execute part of the
build process as root, it prefixes the command it executes with
gain-root-command if one has been specified (long option since dpkg
1.18.8). Otherwise, if none has been specified, fakeroot will be
used by default, if the command is present. gain-root-command
should start with the name of a program on the PATH and will get as
arguments the name of the real command to run and the arguments it should
take. gain-root-command can include parameters (they must be
space-separated) but no shell metacharacters. gain-root-command
might typically be fakeroot, sudo, super or
really. su is not suitable, since it can only invoke the
user's shell with -c instead of passing arguments individually to
the command to be run.
- -R, --rules-file=rules-file
- Building a Debian package usually involves invoking
debian/rules as a command with several standard parameters (since
dpkg 1.14.17, long option since dpkg 1.18.8). With this option it's
possible to use another program invocation to build the package (it can
include space separated parameters). Alternatively it can be used to
execute the standard rules file with another make program (for example by
using /usr/local/bin/make -f debian/rules as
- Command used to check the .changes file itself and
any artifact built referenced in the file (since dpkg 1.17.6). The command
should take the .changes pathname as an argument. This command will
usually be lintian.
- Pass option opt to the check-command
specified with DEB_CHECK_COMMAND or --check-command (since
dpkg 1.17.6). Can be used multiple times.
- Set the specified shell code hook-command as the
hook hook-name, which will run at the times specified in the run
steps (since dpkg 1.17.6). The hooks will always be executed even if the
following action is not performed (except for the binary hook). All
the hooks will run in the unpacked source directory.
Note: Hooks can affect the build process, and cause build failures if their
commands fail, so watch out for unintended consequences.
The current hook-name supported are:
init preclean source build binary changes postclean check sign done
The hook-command supports the following substitution format string,
which will get applied to it before execution:
- A single % character.
- A boolean value (0 or 1), representing whether the
following action is being performed.
- The source package name.
- The source package version.
- The source package version (without the epoch).
- The upstream version.
- Pass option opt to dpkg-genbuildinfo (since
dpkg 1.18.11). Can be used multiple times.
- -p, --sign-command=sign-command
- When dpkg-buildpackage needs to execute GPG to sign
a source control ( .dsc) file or a .changes file it will run
sign-command (searching the PATH if necessary) instead of
gpg2 or gpg (long option since dpkg 1.18.8).
sign-command will get all the arguments that gpg2 or
gpg would have gotten. sign-command should not contain
spaces or any other shell metacharacters.
- -k, --sign-key=key-id
- Specify a key-ID to use when signing packages (long option
since dpkg 1.18.8).
- -us, --unsigned-source
- Do not sign the source package (long option since dpkg
- -ui, --unsigned-buildinfo
- Do not sign the .buildinfo file (since dpkg
- -uc, --unsigned-changes
- Do not sign the .buildinfo and .changes files
(long option since dpkg 1.18.8).
- Do not sign any file, this includes the source package, the
.buildinfo file and the .changes file (since dpkg
- Force the signing of the resulting files (since dpkg
1.17.0), regardless of -us, --unsigned-source, -ui,
--unsigned-buildinfo, -uc, --unsigned-changes or
other internal heuristics.
- -ss -sA -sk -su -sr
-sK -sU -sR -i,
--compression=compressor Passed unchanged to
dpkg-source. See its manual page.
- Pass option opt to dpkg-source (since dpkg
1.15.6). Can be used multiple times.
- Pass option opt to dpkg-genchanges (since
dpkg 1.15.6). Can be used multiple times.
- --admindir dir Change the location of the
dpkg database (since dpkg 1.14.0). The default location is
- -?, --help
- Show the usage message and exit.
- Show the version and exit.
- If set, it will be used as the command to check the
.changes file (since dpkg 1.17.6). Overridden by the
- If set, it will be used to sign the .changes and
.dsc files (since dpkg 1.17.2). Overridden by the --sign-key
- If set, it will contain a space-separated list of options
that might affect the build process in debian/rules, and the
behavior of some dpkg commands.
With nocheck the DEB_CHECK_COMMAND variable will be ignored.
With parallel=N the parallel jobs will be set to N,
overridden by the --jobs-try option.
- If set, it will be used as the active build profile(s) for
the package being built (since dpkg 1.17.2). It is a space separated list
of profile names. Overridden by the -P option.
- Sets the color mode (since dpkg 1.18.5). The currently
accepted values are: auto (default), always and
Even if dpkg-buildpackage
exports some variables, debian/rules
should not rely on their presence and should instead use the respective
interface to retrieve the needed values, because that file is the main entry
point to build packages and running it standalone should be supported.
- DEB_HOST_* DEB_TARGET_*
dpkg-architecture is called with the -a and -t
parameters forwarded. Any variable that is output by its -s option
is integrated in the build environment.
- This variable is set to the Unix timestamp since the epoch
of the latest entry in debian/changelog, if it is not already
- System wide configuration file
- $XDG_CONFIG_HOME/dpkg/buildpackage.conf or
- $HOME/.config/dpkg/buildpackage.conf User
Compiler flags are no longer exported¶
Between dpkg 1.14.17 and 1.16.1, dpkg-buildpackage
flags ( CFLAGS
) with values as returned by dpkg-buildflags
. This is no
longer the case.
Default build targets¶
is using the build-arch
targets since dpkg 1.16.2. Those targets are thus mandatory. But to avoid
breakages of existing packages, and ease the transition, if the source package
does not build both architecture independent and dependent binary packages
(since dpkg 1.18.8) it will fallback to use the build
target if make
-f debian/rules -qn build-target
returns 2 as exit code.
It should be possible to specify spaces and shell metacharacters and initial
arguments for gain-root-command