ASTRIBANK_TOOL(8) | ASTRIBANK_TOOL(8) |
NAME¶
astribank_tool - Xorcom Astribank (xpp) control toolSYNOPSIS¶
astribank_tool [ options ] [ operation... ] -D device-pathastribank_tool [-h]
DESCRIPTION¶
astribank_tool is a tool to control the USB-level functionality of an Astribank. The tool operates on a single Astribank at a time (given as parameter to the -D command line option).OPTIONS¶
-D device-pathRequired. The device to read from/write to. This is
bus_num/device_num, where bus_num and device_num
are the first two numbers in the output of lsusb(8) or dahdi_hardware(8). On
older versions of this tool you needed a complete path to the device, which
would be /dev/bus/usb/bus_num/device_num, or
/proc/bus/usb/bus_num/device_num.
-p num
Set the TwinStar port number. Either 0 or 1.
(TODO: explain).
-r type
Reset the Astribank and renumerate its USB connection to
power on product ID.
Tyep can be: half or full.
(TODO: explain those).
-w 0|1
Enable (1) or disable (0) the TwinStar watchdog. When
enabled, the Astribank will jump to the second port if this system is
"not working" and the system on the second port is available.
-Q
Query astribank properties via MPP protocol.
-n
Renumerate the Astribank product number (e.g: from 1161
to 1162).
-v
Increase verbosity. May be used multiple times.
-d mask
Set debug mask to mask. Default is 0, 0xFF is
"everything".
-h
Displays usage message.
SEE ALSO¶
fxload(8), lsusb(8), astribank_hexload(8)AUTHOR¶
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
29 March 2009 |