table of contents
- RUN MODES
- EXTRA OPTIONS
- CACHE SIZE MANAGEMENT
- CACHE COMPRESSION
- CACHE STATISTICS
- HOW CCACHE WORKS
- COMPILING IN DIFFERENT DIRECTORIES
- PRECOMPILED HEADERS
- SHARING A CACHE
- SHARING A CACHE ON NFS
- USING CCACHE WITH OTHER COMPILER WRAPPERS
- MORE INFORMATION
NAME¶ccache - a fast C/C++ compiler cache
ccache [options] ccache compiler [compiler options] compiler [compiler options] (via symbolic link)
DESCRIPTION¶ccache is a compiler cache. It speeds up recompilation by caching the result of previous compilations and detecting when the same compilation is being done again. Supported languages are C, C++, Objective-C and Objective-C++.
•Keeps statistics on hits/misses.
•Automatic cache size management.
•Can cache compilations that generate warnings.
•Optionally uses hard links where possible to avoid copies.
•Optionally compresses files in the cache to reduce disk space.
•Only knows how to cache the compilation of a single C/C++/Objective-C/Objective-C++ file. Other types of compilations (multi-file compilation, linking, etc) will silently fall back to running the real compiler.
•Only works with GCC and compilers that behave similar enough.
•Some compiler flags are not supported. If such a flag is detected, ccache will silently fall back to running the real compiler.
RUN MODES¶There are two ways to use ccache. You can either prefix your compilation commands with ccache or you can let ccache masquerade as the compiler by creating a symbolic link (named as the compiler) to ccache. The first method is most convenient if you just want to try out ccache or wish to use it for some specific projects. The second method is most useful for when you wish to use ccache for all your compilations.
ln -s /usr/bin/ccache /usr/local/bin/gcc ln -s /usr/bin/ccache /usr/local/bin/g++ ln -s /usr/bin/ccache /usr/local/bin/cc ln -s /usr/bin/ccache /usr/local/bin/c++
OPTIONS¶These options only apply when you invoke ccache as “ccache”. When invoked as a compiler (via a symlink as described in the previous section), the normal compiler options apply and you should refer to the compiler’s documentation. -c, --cleanup
Clean up the cache by removing old cached files until the specified file number and cache size limits are not exceeded. This also recalculates the cache file count and size totals. Normally, there is no need to initiate cleanup manually as ccache keeps the cache below the specified limits at runtime and keeps statistics up to date on each compilation. Forcing a cleanup is mostly useful if you manually modify the cache contents or believe that the cache size statistics may be inaccurate.-C, --clear
Clear the entire cache, removing all cached files, but keeping the configuration file.-F, --max-files=N
Set the maximum number of files allowed in the cache. Use 0 for no limit. The value is stored in a configuration file in the cache directory and applies to all future compilations.-h, --help
Print an options summary page.-M, --max-size=SIZE
Set the maximum size of the files stored in the cache. SIZE should be a number followed by an optional suffix: k, M, G, T (decimal), Ki, Mi, Gi or Ti (binary). The default suffix is G. Use 0 for no limit. The value is stored in a configuration file in the cache directory and applies to all future compilations.-o, --set-config=KEY=VALUE
Set configuration KEY to VALUE. See CONFIGURATION for more information.-p, --print-config
Print current configuration options and from where they originate (environment variable, configuration file or compile-time default).-s, --show-stats
Print the current statistics summary for the cache.-V, --version
Print version and copyright information.-z, --zero-stats
Zero the cache statistics (but not the configuration options).
EXTRA OPTIONS¶When run as a compiler, ccache usually just takes the same command line options as the compiler you are using. The only exception to this is the option --ccache-skip. That option can be used to tell ccache to avoid interpreting the next option in any way and to pass it along to the compiler as-is.
CONFIGURATION¶ccache’s default behavior can be overridden by configuration file settings, which in turn can be overridden by environment variables with names starting with CCACHE_. ccache normally reads configuration from two files: first a system-level configuration file and secondly a cache-specific configuration file. The priority of configuration settings is as follows (where 1 is highest):
2.The cache-specific configuration file <ccachedir>/ccache.conf (typically $HOME/.ccache/ccache.conf).
3.The system-wide configuration file <sysconfdir>/ccache.conf (typically /etc/ccache.conf or /usr/local/etc/ccache.conf).
Configuration file syntax¶Configuration files are in a simple “key = value” format, one setting per line. Lines starting with a hash sign are comments. Blank lines are ignored, as is whitespace surrounding keys and values. Example:
# Set maximum cache size to 10 GB: max_size = 10G
Boolean values¶Some settings are boolean values (i.e. truth values). In a configuration file, such values must be set to the string true or false. For the corresponding environment variables, the semantics are a bit different: a set environment variable means “true” regardless of the value (even if set to the empty string), and an unset environment variable means “false”. Each boolean environment variable also has a negated form starting with CCACHE_NO. For example, CCACHE_COMPRESS can be set to force compression and CCACHE_NOCOMPRESS can be set to force no compression.
Configuration settings¶Below is a list of available configuration settings. The corresponding environment variable name is indicated in parentheses after each configuration setting key. base_dir (CCACHE_BASEDIR)
This setting should be an absolute path to a directory. ccache then rewrites absolute paths into relative paths before computing the hash that identifies the compilation, but only for paths under the specified directory. If set to the empty string (which is the default), no rewriting is done. See also the discussion under COMPILING IN DIFFERENT DIRECTORIES. If using GCC or newer versions of Clang, you might want to look into the -fdebug-prefix-map=old=new option for relocating debug info to a common prefix (mapping prefix with old=new).cache_dir (CCACHE_DIR)
This setting specifies where ccache will keep its cached compiler outputs. It will only take effect if set in the system-wide configuration file or as an environment variable. The default is $HOME/.ccache.cache_dir_levels (CCACHE_NLEVELS)
This setting allows you to choose the number of directory levels in the cache directory. The default is 2. The minimum is 1 and the maximum is 8.compiler (CCACHE_CC)
This setting can be used to force the name of the compiler to use. If set to the empty string (which is the default), ccache works it out from the command line.compiler_check (CCACHE_COMPILERCHECK)
By default, ccache includes the modification time (“mtime”) and size of the compiler in the hash to ensure that results retrieved from the cache are accurate. This setting can be used to select another strategy. Possible values are: contentcompression (CCACHE_COMPRESS or CCACHE_NOCOMPRESS, see Boolean values above)
Hash the content of the compiler binary. This makes ccache very slightly slower compared to the mtime setting, but makes it cope better with compiler upgrades during a build bootstrapping process.mtime
Hash the compiler’s mtime and size, which is fast. This is the default.none
Don’t hash anything. This may be good for situations where you can safely use the cached results even though the compiler’s mtime or size has changed (e.g. if the compiler is built as part of your build system and the compiler’s source has not changed, or if the compiler only has changes that don’t affect code generation). You should only use the none setting if you know what you are doing.string:value
Use value as the string to calculate hash from. This can be the compiler revision number you retrieved earlier and set here via environment variable.a command string
Hash the standard output and standard error output of the specified command. The string will be split on whitespace to find out the command and arguments to run. No other interpretation of the command string will be done, except that the special word %compiler% will be replaced with the path to the compiler. Several commands can be specified with semicolon as separator. Examples:You should make sure that the specified command is as fast as possible since it will be run once for each ccache invocation.Identifying the compiler using a command is useful if you want to avoid cache misses when the compiler has been rebuilt but not changed.Another case is when the compiler (as seen by ccache) actually isn’t the real compiler but another compiler wrapper — in that case, the default mtime method will hash the mtime and size of the other compiler wrapper, which means that ccache won’t be able to detect a compiler upgrade. Using a suitable command to identify the compiler is thus safer, but it’s also slower, so you should consider continue using the mtime method in combination with the prefix_command setting if possible. See USING CCACHE WITH OTHER COMPILER WRAPPERS.
%compiler% -dumpmachine; %compiler% -dumpversion
If true, ccache will compress object files and other compiler output it puts in the cache. However, this setting has no effect on how files are retrieved from the cache; compressed and uncompressed results will still be usable regardless of this setting. The default is false.compression_level (CCACHE_COMPRESSLEVEL)
This setting determines the level at which ccache will compress object files. It only has effect if compression is enabled. The value defaults to 6, and must be no lower than 1 (fastest, worst compression) and no higher than 9 (slowest, best compression).cpp_extension (CCACHE_EXTENSION)
This setting can be used to force a certain extension for the intermediate preprocessed file. The default is to automatically determine the extension to use for intermediate preprocessor files based on the type of file being compiled, but that sometimes doesn’t work. For example, when using the “aCC” compiler on HP-UX, set the cpp extension to i.direct_mode (CCACHE_DIRECT or CCACHE_NODIRECT, see Boolean values above)
If true, the direct mode will be used. The default is true. See THE DIRECT MODE.disable (CCACHE_DISABLE or CCACHE_NODISABLE, see Boolean values above)
When true, ccache will just call the real compiler, bypassing the cache completely. The default is false.extra_files_to_hash (CCACHE_EXTRAFILES)
This setting is a list of paths to files that ccache will include in the the hash sum that identifies the build. The list separator is semicolon on Windows systems and colon on other systems.hard_link (CCACHE_HARDLINK or CCACHE_NOHARDLINK, see Boolean values above)
If true, ccache will attempt to use hard links from the cache directory when creating the compiler output rather than using a file copy. Using hard links may be slightly faster in some situations, but can confuse programs like “make” that rely on modification times. Another thing to keep in mind is that if the resulting object file is modified in any way, this corrupts the cached object file as well. Hard links are never made for compressed cache files. This means that you should not enable compression if you want to use hard links. The default is false.hash_dir (CCACHE_HASHDIR or CCACHE_NOHASHDIR, see Boolean values above)
If true (which is the default), ccache will include the current working directory (CWD) in the hash that is used to distinguish two compilations when generating debug info (compiler option -g with variations). Exception: The CWD will not be included in the hash if base_dir is set (and matches the CWD) and the compiler option -fdebug-prefix-map is used.The reason for including the CWD in the hash by default is to prevent a problem with the storage of the current working directory in the debug info of an object file, which can lead ccache to return a cached object file that has the working directory in the debug info set incorrectly.You can disable this setting to get cache hits when compiling the same source code in different directories if you don’t mind that CWD in the debug info might be incorrect.ignore_headers_in_manifest (CCACHE_IGNOREHEADERS)
This setting is a list of paths to files (or directories with headers) that ccache will not include in the manifest list that makes up the direct mode. Note that this can cause stale cache hits if those headers do indeed change. The list separator is semicolon on Windows systems and colon on other systems.keep_comments_cpp (CCACHE_COMMENTS or CCACHE_NOCOMMENTS, see Boolean values above)
If true, ccache will not discard the comments before hashing preprocessor output. This can be used to check documentation with -Wdocumentation.limit_multiple (CCACHE_LIMIT_MULTIPLE)
Sets the limit when cleaning up. Files are deleted (in LRU order) until the levels are below the limit. The default is 0.8 (= 80%).log_file (CCACHE_LOGFILE)
If set to a file path, ccache will write information on what it is doing to the specified file. This is useful for tracking down problems.max_files (CCACHE_MAXFILES)
This option specifies the maximum number of files to keep in the cache. Use 0 for no limit (which is the default).max_size (CCACHE_MAXSIZE)
This option specifies the maximum size of the cache. Use 0 for no limit. The default value is 5G. Available suffixes: k, M, G, T (decimal) and Ki, Mi, Gi, Ti (binary). The default suffix is "G".path (CCACHE_PATH)
If set, ccache will search directories in this list when looking for the real compiler. The list separator is semicolon on Windows systems and colon on other systems. If not set, ccache will look for the first executable matching the compiler name in the normal PATH that isn’t a symbolic link to ccache itself.prefix_command (CCACHE_PREFIX)
This option adds a list of prefixes (separated by space) to the command line that ccache uses when invoking the compiler. See also USING CCACHE WITH OTHER COMPILER WRAPPERS.prefix_command_cpp (CCACHE_PREFIX_CPP)
This option adds a list of prefixes (separated by space) to the command line that ccache uses when invoking the preprocessor.read_only (CCACHE_READONLY or CCACHE_NOREADONLY, see Boolean values above)
If true, ccache will attempt to use existing cached object files, but it will not to try to add anything new to the cache. If you are using this because your ccache directory is read-only, then you need to set temporary_dir as otherwise ccache will fail to create temporary files.read_only_direct (CCACHE_READONLY_DIRECT or CCACHE_NOREADONLY_DIRECT, see Boolean values above)
Just like read_only except that ccache will only try to retrieve results from the cache using the direct mode, not the preprocessor mode. See documentation for read_only regarding using a read-only ccache directory.recache (CCACHE_RECACHE or CCACHE_NORECACHE, see Boolean values above)
If true, ccache will not use any previously stored result. New results will still be cached, possibly overwriting any pre-existing results.run_second_cpp (CCACHE_CPP2 or CCACHE_NOCPP2, see Boolean values above)
If true, ccache will first run the preprocessor to preprocess the source code (see THE PREPROCESSOR MODE) and then on a cache miss run the compiler on the source code to get hold of the object file. This is the default.If false, ccache will first run preprocessor to preprocess the source code and then on a cache miss run the compiler on the preprocessed source code instead of the original source code. This makes cache misses slightly faster since the source code only has to be preprocessed once. The downside is that some compilers won’t produce the same result (for instance diagnostics warnings) when compiling preprocessed source code.sloppiness (CCACHE_SLOPPINESS)
By default, ccache tries to give as few false cache hits as possible. However, in certain situations it’s possible that you know things that ccache can’t take for granted. This setting makes it possible to tell ccache to relax some checks in order to increase the hit rate. The value should be a comma-separated string with options. Available options are: file_macroSee the discussion under TROUBLESHOOTING for more information.stats (CCACHE_STATS or CCACHE_NOSTATS, see Boolean values above)
Ignore __FILE__ being present in the source.file_stat_matches
ccache normally examines a file’s contents to determine whether it matches the cached version. With this option set, ccache will consider a file as matching its cached version if the sizes, mtimes and ctimes match.include_file_ctime
By default, ccache also will not cache a file if it includes a header whose ctime is too new. This option disables that check.include_file_mtime
By default, ccache will not cache a file if it includes a header whose mtime is too new. This option disables that check.no_system_headers
By default, ccache will also include all system headers in the manifest. With this option set, ccache will only include system headers in the hash but not add the system header files to the list of include files.pch_defines
Be sloppy about #defines when precompiling a header file. See PRECOMPILED HEADERS for more information.time_macros
Ignore __DATE__ and __TIME__ being present in the source code.
If true, ccache will update the statistics counters on each compilation. The default is true.temporary_dir (CCACHE_TEMPDIR)
This setting specifies where ccache will put temporary files. The default is <cache_dir>/tmp.NoteIn previous versions of ccache, CCACHE_TEMPDIR had to be on the same filesystem as the CCACHE_DIR path, but this requirement has been relaxed.)umask (CCACHE_UMASK)
This setting specifies the umask for ccache and all child processes (such as the compiler). This is mostly useful when you wish to share your cache with other users. Note that this also affects the file permissions set on the object files created from your compilations.unify (CCACHE_UNIFY or CCACHE_NOUNIFY, see Boolean values above)
If true, ccache will use a C/C++ unifier when hashing the preprocessor output if the -g option is not used. The unifier is slower than a normal hash, so setting this environment variable loses a little bit of speed, but it means that ccache can take advantage of not recompiling when the changes to the source code consist of reformatting only. Note that enabling the unifier changes the hash, so cached compilations produced when the unifier is enabled cannot be reused when the unifier is disabled, and vice versa. Enabling the unifier may result in incorrect line number information in compiler warning messages and expansions of the __LINE__ macro. Also note that enabling the unifier implies turning off the direct mode.
CACHE SIZE MANAGEMENT¶By default, ccache has a five gigabyte limit on the total size of files in the cache and no maximum number of files. You can set different limits using the -M/--max-size and -F/--max-files options. Use ccache -s/--show-stats to see the cache size and the currently configured limits (in addition to other various statistics).
CACHE COMPRESSION¶ccache can optionally compress all files it puts into the cache using the compression library zlib. While this may involve a tiny performance slowdown, it increases the number of files that fit in the cache. You can turn on compression with the compression configuration setting and you can also tweak the compression level with compression_level.
CACHE STATISTICS¶ccache -s/--show-stats can show the following statistics:
|autoconf compile/link||Uncachable compilation or linking by an autoconf test.|
|bad compiler arguments||Malformed compiler argument, e.g. missing a value for an option that requires an argument or failure to read a file specified by an option argument.|
|cache file missing||A file was unexpectedly missing from the cache. This only happens in rare situations, e.g. if one ccache instance is about to get a file from the cache while another instance removed the file as part of cache cleanup.|
|cache hit (direct)||A result was successfully found using the direct mode.|
|cache hit (preprocessed)||A result was successfully found using the preprocessor mode.|
|cache miss||No result was found.|
|cache size||Current size of the cache.|
|called for link||The compiler was called for linking, not compiling.|
|called for preprocessing||The compiler was called for preprocessing, not compiling.|
|can’t use precompiled header||Preconditions for using precompiled headers were not fulfilled.|
|ccache internal error||Unexpected failure, e.g. due to problems reading/writing the cache.|
|cleanups performed||Number of cleanups performed, either implicitly due to the cache size limit being reached or due to explicit ccache -c/--cleanup calls.|
|compile failed||The compilation failed. No result stored in the cache.|
|compiler check failed||A compiler check program specified by compiler_check (CCACHE_COMPILERCHECK) failed.|
|compiler produced empty output||The compiler’s output file (typically an object file) was empty after compilation.|
|compiler produced no output||The compiler’s output file (typically an object file) was missing after compilation.|
|compiler produced stdout||The compiler wrote data to standard output. This is something that compilers normally never do, so ccache is not designed to store such output in the cache.|
|couldn’t find the compiler||The compiler to execute could not be found.|
|error hashing extra file||Failure reading a file specified by extra_files_to_hash (CCACHE_EXTRAFILES).|
|files in cache||Current number of files in the cache.|
|multiple source files||The compiler was called to compile multiple source files in one go. This is not supported by ccache.|
|no input file||No input file was specified to the compiler.|
|output to a non-regular file||The output path specified with -o is not a file (e.g. a directory or a device node).|
|output to stdout||The compiler was instructed to write its output to standard output using -o -. This is not supported by ccache.|
|preprocessor error||Preprocessing the source code using the compiler’s -E option failed.|
|unsupported code directive||Code like the assembler “.incbin” directive was found. This is not supported by ccache.|
|unsupported compiler option||A compiler option not supported by ccache was found.|
|unsupported source language||A source language e.g. specified with -x was unsupported by ccache.|
HOW CCACHE WORKS¶The basic idea is to detect when you are compiling exactly the same code a second time and reuse the previously produced output. The detection is done by hashing different kinds of information that should be unique for the compilation and then using the hash sum to identify the cached output. ccache uses MD4, a very fast cryptographic hash algorithm, for the hashing. (MD4 is nowadays too weak to be useful in cryptographic contexts, but it should be safe enough to be used to identify recompilations.) On a cache hit, ccache is able to supply all of the correct compiler outputs (including all warnings, dependency file, etc) from the cache.
•the direct mode, where ccache hashes the source code and include files directly
•the preprocessor mode, where ccache runs the preprocessor on the source code and hashes the result
Common hashed information¶For both modes, the following information is included in the hash:
•the extension used by the compiler for a file with preprocessor output (normally .i for C code and .ii for C++ code)
•the compiler’s size and modification time (or other compiler-specific information specified by the compiler_check setting)
•the name of the compiler
•the current directory (if the hash_dir setting is enabled)
•contents of files specified by the extra_files_to_hash setting (if any)
The direct mode¶In the direct mode, the hash is formed of the common information and:
•the input source file
•the command line options
•references to cached compilation results (object file, dependency file, etc) that were produced by previous compilations that matched the hash
•paths to the include files that were read at the time the compilation results were stored in the cache
•hash sums of the include files at the time the compilation results were stored in the cache
•the configuration setting direct_mode is false
•a modification time of one of the include files is too new (needed to avoid a race condition)
•the unifier is enabled (the configuration setting unify is true)
•a compiler option not supported by the direct mode is used:
•a -Wp,X compiler option other than -Wp,-MD,path, -Wp,-MMD,path and -Wp,-D_define_
•the string “__TIME__” is present in the source code
The preprocessor mode¶In the preprocessor mode, the hash is formed of the common information and:
•the preprocessor output from running the compiler with -E
•the command line options except options that affect include files ( -I, -include, -D, etc; the theory is that these options will change the preprocessor output if they have any effect at all)
•any standard error output generated by the preprocessor
COMPILING IN DIFFERENT DIRECTORIES¶Some information included in the hash that identifies a unique compilation may contain absolute paths:
•The preprocessed source code may contain absolute paths to include files if the compiler option -g is used or if absolute paths are given to -I and similar compiler options.
•Paths specified by compiler options (such as -I, -MF, etc) may be absolute.
•The source code file path may be absolute, and that path may substituted for __FILE__ macros in the source code or included in warnings emitted to standard error by the preprocessor.
•If you specify an absolute path to the source code file, __FILE__ macros will be expanded to a relative path instead.
•If you specify an absolute path to the source code file and compile with -g, the source code path stored in the object file may point to the wrong directory, which may prevent debuggers like GDB from finding the source code. Sometimes, a work-around is to change the directory explicitly with the “cd” command in GDB.
PRECOMPILED HEADERS¶ccache has support for GCC’s precompiled headers. However, you have to do some things to make it work properly:
•You must set sloppiness to pch_defines,time_macros. The reason is that ccache can’t tell whether __TIME__ or __DATE__ is used when using a precompiled header. Further, it can’t detect changes in #defines in the source code because of how preprocessing works in combination with precompiled headers.
•You must either:If you don’t do this, either the non-precompiled version of the header file will be used (if available) or ccache will fall back to running the real compiler and increase the statistics counter “preprocessor error” (if the non-precompiled header file is not available).
•use the -include compiler option to include the precompiled header (i.e., don’t use #include in the source code to include the header); or
•(for the Clang compiler) use the -include-pch compiler option to include the PCH file generated from the precompiled header; or
•add the -fpch-preprocess compiler option when compiling.
SHARING A CACHE¶A group of developers can increase the cache hit rate by sharing a cache directory. To share a cache without unpleasant side effects, the following conditions should to be met:
•Use the same cache directory.
•Make sure that the configuration setting hard_link is false (which is the default).
•Make sure that all users are in the same group.
•Set the configuration setting umask to 002. This ensures that cached files are accessible to everyone in the group.
•Make sure that all users have write permission in the entire cache directory (and that you trust all users of the shared cache).
•Make sure that the setgid bit is set on all directories in the cache. This tells the filesystem to inherit group ownership for new directories. The following command might be useful for this:
find $CCACHE_DIR -type d | xargs chmod g+s
SHARING A CACHE ON NFS¶It is possible to put the cache directory on an NFS filesystem (or similar filesystems), but keep in mind that:
•Having the cache on NFS may slow down compilation. Make sure to do some benchmarking to see if it’s worth it.
•ccache hasn’t been tested very thoroughly on NFS.
USING CCACHE WITH OTHER COMPILER WRAPPERS¶The recommended way of combining ccache with another compiler wrapper (such as “distcc”) is by letting ccache execute the compiler wrapper. This is accomplished by defining the configuration setting prefix_command, for example by setting the environment variable CCACHE_PREFIX to the name of the wrapper (e.g. distcc). ccache will then prefix the command line with the specified command when running the compiler. To specify several prefix commands, set prefix_command to a colon-separated list of commands.
•Compiler upgrades will not be detected properly.
•The cached results will not be shared between compilations with and without the other wrapper.
•The direct mode fails to pick up new header files in some rare scenarios. See THE DIRECT MODE above.
General¶A general tip for getting information about what ccache is doing is to enable debug logging by setting log_file. The log contains executed commands, important decisions that ccache makes, read and written files, etc. Another way of keeping track of what is happening is to check the output of ccache -s.
Performance¶ccache has been written to perform well out of the box, but sometimes you may have to do some adjustments of how you use the compiler and ccache in order to improve performance.
•If “cache hit (preprocessed)” has been incremented instead of “cache hit (direct)”, ccache has fallen back to preprocessor mode, which is generally slower. Some possible reasons are:
•The source code has been modified in such a way that the preprocessor output is not affected.
•Compiler arguments that are hashed in the direct mode but not in the preprocessor mode have changed ( -I, -include, -D, etc) and they didn’t affect the preprocessor output.
•The compiler option -Xpreprocessor or -Wp,X (except -Wp,-MD, path, -Wp,-MMD,path, and -Wp,-D_define_) is used.
•This was the first compilation with a new value of the base directory setting.
•A modification time of one of the include files is too new (created the same second as the compilation is being done). This check is made to avoid a race condition. To fix this, create the include file earlier in the build process, if possible, or set sloppiness to include_file_mtime if you are willing to take the risk. (The race condition consists of these events: the preprocessor is run; an include file is modified by someone; the new include file is hashed by ccache; the real compiler is run on the preprocessor’s output, which contains data from the old header file; the wrong object file is stored in the cache.)
•The __TIME__ preprocessor macro is (potentially) being used. ccache turns off direct mode if “__TIME__” is present in the source code. This is done as a safety measure since the string indicates that a __TIME__ macro may affect the output. (To be sure, ccache would have to run the preprocessor, but the sole point of the direct mode is to avoid that.) If you know that __TIME__ isn’t used in practise, or don’t care if ccache produces objects where __TIME__ is expanded to something in the past, you can set sloppiness to time_macros.
•The __DATE__ preprocessor macro is (potentially) being used and the date has changed. This is similar to how __TIME__ is handled. If “__DATE__” is present in the source code, ccache hashes the current date in order to be able to produce the correct object file if the __DATE__ macro affects the output. If you know that __DATE__ isn’t used in practise, or don’t care if ccache produces objects where __DATE__ is expanded to something in the past, you can set sloppiness to time_macros.
•The __FILE__ preprocessor macro is (potentially) being used and the file path has changed. If “__FILE__” is present in the source code, ccache hashes the current input file path in order to be able to produce the correct object file if the __FILE__ macro affects the output. If you know that __FILE__ isn’t used in practise, or don’t care if ccache produces objects where __FILE__ is expanded to the wrong path, you can set sloppiness to file_macro.
•If “cache miss” has been incremented even though the same code has been compiled and cached before, ccache has either detected that something has changed anyway or a cleanup has been performed (either explicitly or implicitly when a cache limit has been reached). Some perhaps unobvious things that may result in a cache miss are usage of __TIME__ or __DATE__ macros, or use of automatically generated code that contains a timestamp, build counter or other volatile information.
•If “multiple source files” has been incremented, it’s an indication that the compiler has been invoked on several source code files at once. ccache doesn’t support that. Compile the source code files separately if possible.
•If “unsupported compiler option” has been incremented, enable debug logging and check which option was rejected.
•If “preprocessor error” has been incremented, one possible reason is that precompiled headers are being used. See PRECOMPILED HEADERS for how to remedy this.
•If “can’t use precompiled header” has been incremented, see PRECOMPILED HEADERS.
Corrupt object files¶It should be noted that ccache is susceptible to general storage problems. If a bad object file sneaks into the cache for some reason, it will of course stay bad. Some possible reasons for erroneous object files are bad hardware (disk drive, disk controller, memory, etc), buggy drivers or file systems, a bad prefix_command or compiler wrapper. If this happens, the easiest way of fixing it is this:
1.Build so that the bad object file ends up in the build tree.
2.Remove the bad object file from the build tree.
3.Rebuild with CCACHE_RECACHE set.
MORE INFORMATION¶Credits, mailing list information, bug reporting instructions, source code, etc, can be found on ccache’s web site: https://ccache.samba.org.
AUTHOR¶ccache was originally written by Andrew Tridgell and is currently developed and maintained by Joel Rosdahl. See AUTHORS.txt or AUTHORS.html and https://ccache.samba.org/credits.html for a list of contributors.