NAME¶psvelo - Plot velocity vectors, crosses, and wedges on maps
SYNOPSIS¶psvelo [ table ] -Jparameters -Rregion [ -Aparameters ] [ -B[p|s]parameters ] [ -Ecolor ] [ -Fcolor ] [ -Gcolor ] [ -K ] [ -L ] [ -N ] [ -O ] [ -P ] [ -Ssymbol/scale/conf/font_size ] [ [ -U[stamp] ] [ -V[level] ] [ -Wpen ] [ -Xx_offset ] [ -Yy_offset ] [ -dinodata ] [ -eregexp ] [ -hheaders ] [ -iflags ] [ -ttransp ] [ -:[i|o] ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION¶psvelo reads data values from files [or standard input] and generates PostScript code that will plot velocity arrows on a map. Most options are the same as for psxy, except -S. The PostScript code is written to standard output. The previous version (psvelomeca) is now obsolete. It has been replaced by psvelo and psmeca.
- One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data columns. If no tables are given then we read from standard input.
- -Jparameters (more ...)
- Select map projection.
- west, east, south, and north specify the region of interest, and you may specify them in decimal degrees or in [±]dd:mm[:ss.xxx][W|E|S|N] format Append +r if lower left and upper right map coordinates are given instead of w/e/s/n. The two shorthands -Rg and -Rd stand for global domain (0/360 and -180/+180 in longitude respectively, with -90/+90 in latitude). Alternatively for grid creation, give Rcodelon/lat/nx/ny, where code is a 2-character combination of L, C, R (for left, center, or right) and T, M, B for top, middle, or bottom. e.g., BL for lower left. This indicates which point on a rectangular region the lon/lat coordinate refers to, and the grid dimensions nx and ny with grid spacings via -I is used to create the corresponding region. Alternatively, specify the name of an existing grid file and the -R settings (and grid spacing, if applicable) are copied from the grid. Appending +uunit expects projected (Cartesian) coordinates compatible with chosen -J and we inversely project to determine actual rectangular geographic region. For perspective view (-p), optionally append /zmin/zmax. In case of perspective view (-p), a z-range (zmin, zmax) can be appended to indicate the third dimension. This needs to be done only when using the -Jz option, not when using only the -p option. In the latter case a perspective view of the plane is plotted, with no third dimension.
Selects the meaning of the columns in the data file and the figure to be plotted.
- Modify vector parameters. For vector heads, append vector head size [Default is 9p]. See Vector Attributes for specifying additional attributes.
- -B[p|s]parameters (more ...)
- Set map boundary frame and axes attributes.
- can be used to rescale the uncertainties of velocities (-Se and -Sr) and rotations (-Sw). Can be combined with the confidence variable.
- Sets the color or shade used for filling uncertainty wedges (-Sw) or velocity error ellipses (-Se or -Sr). [If -E is not specified, the uncertainty regions will be transparent.]
- Sets the color or shade used for frame and annotation. [Default is black]
- Specify color (for symbols/polygons) or pattern (for polygons) [Default is black]. Optionally, specify -Gpicon_size/pattern, where pattern gives the number of the image pattern (1-90) OR the name of a icon-format file. icon_size sets the unit size in inches. To invert black and white pixels, use -GP instead of -Gp. See the CookBook for information on individual patterns.
- -K (more ...)
- Do not finalize the PostScript plot.
- Draw lines. Ellipses and fault planes will have their outlines drawn using current pen (see -W).
- Do NOT skip symbols that fall outside the frame boundary specified by -R. [Default plots symbols inside frame only].
- -O (more ...)
- Append to existing PostScript plot.
- -P (more ...)
- Select "Portrait" plot orientation.
- -U[[just]/dx/dy/][c|label] (more ...)
- Draw GMT time stamp logo on plot.
- -V[level] (more ...)
- Select verbosity level [c].
- Set pen attributes for velocity arrows, ellipse circumference and fault plane edges. [Defaults: width = default, color = black, style = solid].
- -Y[a|c|f|r][y-shift[u]] (more ...)
- Shift plot origin.
- -dinodata (more ...)
- Replace input columns that equal nodata with NaN.
- -e[~]"pattern" | -e[~]/regexp/[i] (more ...)
- Only accept data records that match the given pattern.
- -h[i|o][n][+c][+d][+rremark][+rtitle] (more ...)
- Skip or produce header record(s).
- -icols[+l][+sscale][+ooffset][,...] (more ...)
- Select input columns and transformations (0 is first column).
- -t[transp] (more ...)
- Set PDF transparency level in percent.
- -:[i|o] (more ...)
- Swap 1st and 2nd column on input and/or output.
- -^ or just -
- Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
- -+ or just +
- Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exits.
- -? or no arguments
- Print a complete usage (help) message, including the explanation of all options, then exits.
VECTOR ATTRIBUTES¶Several modifiers may be appended to the vector-producing options to specify the placement of vector heads, their shapes, and the justification of the vector. Below, left and right refers to the side of the vector line when viewed from the start point to the end point of the segment:
+b places a vector head at the beginning of the vector path [none]. Optionally, append t for a terminal line, c for a circle, a for arrow [Default], i for tail, A for plain arrow, and I for plain tail. Further append l|r to only draw the left or right side of this head [both sides].
+e places a vector head at the end of the vector path [none]. Optionally, append t for a terminal line, c for a circle, a for arrow [Default], i for tail, A for plain arrow, and I for plain tail. Further append l|r to only draw the left or right side of this head [both sides].
+g-|fill turns off vector head fill (if -) or sets the vector head fill [Default fill is used, which may be no fill].
+hshape sets the shape of the vector head (range -2/2). Default is controlled by MAP_VECTOR_SHAPE .
+l draws half-arrows, using only the left side of specified heads [both sides].
+m places a vector head at the mid-point the vector path [none]. Append f or r for forward or reverse direction of the vector [forward]. Optionally, append t for a terminal line, c for a circle, or a for arrow head [Default]. Further append l|r to only draw the left or right side of this head [both sides]. Cannot be combined with +b or +e.
+nnorm scales down vector attributes (pen thickness, head size) with decreasing length, where vectors shorter than norm will have their attributes scaled by length/norm [arrow attributes remains invariant to length].
+oplon/plat specifies the oblique pole for the great or small circles. Only needed for great circles if +q is given.
+p[-][pen] sets the vector pen attributes. If pen has a leading - then the head outline is not drawn. [Default pen is used, and head outline is drawn]
+q means the input angle, length data instead represent the start and stop opening angles of the arc segment relative to the given point.
+r draws half-arrows, using only the right side of specified heads [both sides].
+t[b|e]trim will shift the beginning or end point (or both) along the vector segment by the given trim; append suitable unit. If the modifiers b|e are not used then trim may be two values separated by a slash, which is used to specify different trims for the two ends. Positive trims will shorted the vector while negative trims will lengthen it [no trim].
In addition, all but circular vectors may take these modifiers:
+s means the input angle, length are instead the x, y coordinates of the vector end point.
Finally, Cartesian vectors may take these modifiers:
EXAMPLES¶The following should make big red arrows with green ellipses, outlined in red. Note that the 39% confidence scaling will give an ellipse which fits inside a rectangle of dimension Esig by Nsig.
gmt psvelo << END -h2 -R-10/10/-10/10 -W0.25p,red -Ggreen -L -Se0.2/0.39/18 \ -B1g1 -Jx0.4/0.4 -A0.3p -P -V > test.ps #Long. Lat. Evel Nvel Esig Nsig CorEN SITE #(deg) (deg) (mm/yr) (mm/yr) 0. -8. 0.0 0.0 4.0 6.0 0.500 4x6 -8. 5. 3.0 3.0 0.0 0.0 0.500 3x3 0. 0. 4.0 6.0 4.0 6.0 0.500 -5. -5. 6.0 4.0 6.0 4.0 0.500 6x4 5. 0. -6.0 4.0 6.0 4.0 -0.500 -6x4 0. -5. 6.0 -4.0 6.0 4.0 -0.500 6x-4 END
This example should plot some residual rates of rotation in the Western Transverse Ranges, California. The wedges will be dark gray, with light gray wedges to represent the 2-sigma uncertainties.
gmt psvelo << END -Sw0.4/1.e7 -W0.75p -Gdarkgray -Elightgray -h1 -D2 -Jm2.2 \ -R240./243./32.5/34.75 -Bf10ma60m/WeSn -P > test.ps #lon lat spin(rad/yr) spin_sigma (rad/yr) 241.4806 34.2073 5.65E-08 1.17E-08 241.6024 34.4468 -4.85E-08 1.85E-08 241.0952 34.4079 4.46E-09 3.07E-08 241.2542 34.2581 1.28E-07 1.59E-08 242.0593 34.0773 -6.62E-08 1.74E-08 241.0553 34.5369 -2.38E-07 4.27E-08 241.1993 33.1894 -2.99E-10 7.64E-09 241.1084 34.2565 2.17E-08 3.53E-08 END
SEE ALSO¶psmeca, pspolar, pscoupe, gmt, psbasemap, psxy
REFERENCES¶Bomford, G., Geodesy, 4th ed., Oxford University Press, 1980.
AUTHORS¶Kurt L. Feigl, Department of Geology and Geophysics at University of Wisconsin-Madison, Madison, Wisconsin, USA
Genevieve Patau, Laboratory of Seismogenesis, Institut de Physique du Globe de Paris, Departement de Sismologie, Paris, France
COPYRIGHT¶2019, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
|January 10, 2019||5.4.5|