NAME¶grdconvert - Convert between different grid formats
SYNOPSIS¶grdconvert ingrdfile[=id[+sscale][+ooffset][+ninvalid]] -Goutgrdfile[=id[+sscale][+ooffset][+ninvalid]][:driver[/datatype]]] [ -N ] [ -Rregion ] [ -V[level] ] [ -fflags ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION¶grdconvert reads a grid file in one format and writes it out using another format. As an option the user may select a subset of the data to be written and to specify scaling, translation, and NaN-value.
- The grid file to be read. Append format =id code if not a standard COARDS-compliant netCDF grid file. If =id is set (see below), you may optionally append any of +sscale, +ooffset, and +ninvalid. The first two options will scale the data and then offset them with the specified amounts after reading while the latter lets you supply a value that represents an invalid grid entry, i.e., 'Not-a-Number' (for floating-point grids this is unnecessary since the IEEE NaN is used; however integers need a value which means no data available). When id=gd, the file will be read using the GDAL library, which will take care to detect the format of the file being read. This mechanism is actually used automatically when the file format is not one of those that GMT recognize. However, sometimes the guessing may fail, so adding id=gd forces a read via GDAL. See Section grid-file-format of the GMT Technical Reference and Cookbook for more information.
- The grid file to be written. Append format =id code if not a
standard COARDS-compliant netCDF grid file. If =id is set (see
below), you may optionally append any of +sscale,
+ooffset, and +ninvalid. These modifiers are
particularly practical when storing the data as integers, by first
removing an offset and then scaling down the values. Since the scale and
offset are applied in reverse order when reading, this does not affect the
data values (except for round-offs). The +n modifier let you append
a value that represents 'Not-a-Number' (for floating-point grids this is
unnecessary since the IEEE NaN is used; however integers need a value
which means no data available). You may specify +sa for
auto-adjusting the scale and/or offset of packed integer grids
(=id+sa is a shorthand for
=id+sa+oa). When id=gd,
the file will be saved using the GDAL library. Append the format
:driver and optionally the output datatype. The driver names
are those used by GDAL itself (e.g., netCDF, GTiFF, etc.), and the data
type is one of
where 'i' and 'u' denote signed and unsigned integers respectively. The
default type is float32. Note also that both driver names and data
types are case insensitive. See Section grid-file-format of the GMT
Technical Reference and Cookbook for more information.
Consider setting IO_NC4_DEFLATION_LEVEL to reduce file size and to further increase read/write performance. Especially when working with subsets of global grids, masks, and grids with repeating grid values, the improvement is usually significant.
- Suppress the writing of the GMT header structure. This is useful when you want to write a native grid to be used by grdraster. It only applies to native grids and is ignored for netCDF output.
- -Rxmin/xmax/ymin/ymax[+r][+uunit] (more ...)
- Specify the region of interest.
- -V[level] (more ...)
- Select verbosity level [c].
- -f[i|o]colinfo (more ...)
- Specify data types of input and/or output columns.
- -^ or just -
- Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
- -+ or just +
- Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exits.
- -? or no arguments
- Print a complete usage (help) message, including the explanation of all options, then exits.
FORMAT IDENTIFIER¶By default, grids will be written as floating point data stored in binary files using the netCDF format and meta-data structure. This format is conform the COARDS conventions. GMT versions prior to 4.1 produced netCDF files that did not conform to these conventions. Although these files are still supported, their use is deprecated. To write other than floating point COARDS-compliant netCDF files, append the =id suffix to the filename outgrdfile.
When reading files, grdconvert and other GMT programs will try to automatically recognize the type of the input grid file. If this fails you may append the =id suffix to the filename ingrdfile.
|nb||GMT netCDF format (8-bit integer, COARDS, CF-1.5)|
|ns||GMT netCDF format (16-bit integer, COARDS, CF-1.5)|
|ni||GMT netCDF format (32-bit integer, COARDS, CF-1.5)|
|nf||GMT netCDF format (32-bit float, COARDS, CF-1.5)|
|nd||GMT netCDF format (64-bit float, COARDS, CF-1.5)|
|cb||GMT netCDF format (8-bit integer, deprecated)|
|cs||GMT netCDF format (16-bit integer, deprecated)|
|ci||GMT netCDF format (32-bit integer, deprecated)|
|cf||GMT netCDF format (32-bit float, deprecated)|
|cd||GMT netCDF format (64-bit float, deprecated)|
|bm||GMT native, C-binary format (bit-mask)|
|bb||GMT native, C-binary format (8-bit integer)|
|bs||GMT native, C-binary format (16-bit integer)|
|bi||GMT native, C-binary format (32-bit integer)|
|bf||GMT native, C-binary format (32-bit float)|
|bd||GMT native, C-binary format (64-bit float)|
|rb||SUN rasterfile format (8-bit standard)|
|rf||GEODAS grid format GRD98 (NGDC)|
|sf||Golden Software Surfer format 6 (32-bit float)|
|sd||Golden Software Surfer format 7 (64-bit float, read-only)|
|af||Atlantic Geoscience Center format AGC (32-bit float)|
|ei||ESRI Arc/Info ASCII Grid Interchange format (ASCII integer)|
|ef||ESRI Arc/Info ASCII Grid Interchange format (ASCII float)|
|gd||Import/export through GDAL|
GMT STANDARD NETCDF FILES¶The standard format used for grdfiles is based on netCDF and conforms to the COARDS conventions. Files written in this format can be read by numerous third-party programs and are platform-independent. Some disk-space can be saved by storing the data as bytes or shorts in stead of integers. Use the scale and offset parameters to make this work without loss of data range or significance. For more details, see App-file-formats.
Multi-variable grid files
By default, GMT programs will read the first 2-dimensional grid contained in a COARDS-compliant netCDF file. Alternatively, use ingrdfile?varname (ahead of any optional suffix =id) to specify the requested variable varname. Since ? has special meaning as a wildcard, escape this meaning by placing the full filename and suffix between quotes.
To extract one layer or level from a 3-dimensional grid stored in a COARDS-compliant netCDF file, append both the name of the variable and the index associated with the layer (starting at zero) in the form: ingrdfile?varname[layer]. Alternatively, specify the value associated with that layer using parentheses in stead of brackets: ingridfile?varname(layer).
In a similar way layers can be extracted from 4- or even 5-dimensional grids. For example, if a grid has the dimensions (parameter, time, depth, latitude, longitude), a map can be selected by using: ingridfile?varname(parameter,time,depth).
Since question marks, brackets and parentheses have special meanings on the command line, escape these meanings by placing the full filename and suffix between quotes.
NATIVE BINARY FILES¶For binary native GMT files the size of the GMT grid header block is hsize = 892 bytes, and the total size of the file is hsize + nx * ny * item_size, where item_size is the size in bytes of each element (1, 2, 4). Bit grids are stored using 4-byte integers, each holding 32 bits, so for these files the size equation is modified by using ceil (nx / 32) * 4 instead of nx. Note that these files are platform-dependent. Files written on Little Endian machines (e.g., PCs) can not be read on Big Endian machines (e.g., most workstations). Also note that it is not possible for GMT to determine uniquely if a 4-byte grid is float or int; in such cases it is best to use the =ID mechanism to specify the file format. In all cases a native grid is considered to be signed (i.e., there are no provision for unsigned short ints or unsigned bytes). For header and grid details, see App-file-formats.
GRID VALUES PRECISION¶Regardless of the precision of the input data, GMT programs that create grid files will internally hold the grids in 4-byte floating point arrays. This is done to conserve memory and furthermore most if not all real data can be stored using 4-byte floating point values. Data with higher precision (i.e., double precision values) will lose that precision once GMT operates on the grid or writes out new grids. To limit loss of precision when processing data you should always consider normalizing the data prior to processing.
EXAMPLES¶To extract the second layer from a 3-dimensional grid named temp from a COARDS-compliant netCDF file climate.nc:
gmt grdconvert climate.nc?temp -Gtemp.nc -V
To create a 4-byte native floating point grid from the COARDS-compliant netCDF file data.nc:
gmt grdconvert data.nc -Gras_data.b4=bf -V
To make a 2-byte short integer file, scale it by 10, subtract 32000, setting NaNs to -9999, do
gmt grdconvert values.nc -Gshorts.i2=bs+s10+o-32000+n-9999 -V
To create a Sun standard 8-bit rasterfile for a subset of the data file image.nc, assuming the range in image.nc is 0-1 and we need 0-255, run
gmt grdconvert image.nc -R-60/-40/-40/-30 -Gimage.ras8=rb+s255 -V
To convert etopo2.nc to etopo2.i2 that can be used by grdraster, try
gmt grdconvert etopo2.nc -Getopo2.i2=bs -N -V
SEE ALSO¶gmt.conf, gmt, grdmath, grdraster
COPYRIGHT¶2019, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
|January 10, 2019||5.4.5|