NAME¶
perlfaq8 - System Interaction
DESCRIPTION¶
This section of the Perl FAQ covers questions involving operating system
interaction. Topics include interprocess communication (IPC), control over the
user-interface (keyboard, screen and pointing devices), and most anything else
not related to data manipulation.
Read the FAQs and documentation specific to the port of perl to your operating
system (eg, perlvms, perlplan9, ...). These should contain more detailed
information on the vagaries of your perl.
How do I find out which operating system I'm running under?¶
The $^O variable ($OSNAME if you use "English") contains an indication
of the name of the operating system (not its release number) that your perl
binary was built for.
How come exec() doesn't return?¶
(contributed by brian d foy)
The "exec" function's job is to turn your process into another command
and never to return. If that's not what you want to do, don't use
"exec". :)
If you want to run an external command and still keep your Perl process going,
look at a piped "open", "fork", or "system".
How do I do fancy stuff with the keyboard/screen/mouse?¶
How you access/control keyboards, screens, and pointing devices
("mice") is system-dependent. Try the following modules:
- Keyboard
-
Term::Cap Standard perl distribution
Term::ReadKey CPAN
Term::ReadLine::Gnu CPAN
Term::ReadLine::Perl CPAN
Term::Screen CPAN
- Screen
-
Term::Cap Standard perl distribution
Curses CPAN
Term::ANSIColor CPAN
- Mouse
-
Tk CPAN
Wx CPAN
Gtk2 CPAN
Qt4 kdebindings4 package
Some of these specific cases are shown as examples in other answers in this
section of the perlfaq.
How do I print something out in color?¶
In general, you don't, because you don't know whether the recipient has a
color-aware display device. If you know that they have an ANSI terminal that
understands color, you can use the Term::ANSIColor module from CPAN:
use Term::ANSIColor;
print color("red"), "Stop!\n", color("reset");
print color("green"), "Go!\n", color("reset");
Or like this:
use Term::ANSIColor qw(:constants);
print RED, "Stop!\n", RESET;
print GREEN, "Go!\n", RESET;
How do I read just one key without waiting for a return key?¶
Controlling input buffering is a remarkably system-dependent matter. On many
systems, you can just use the
stty command as shown in "getc"
in perlfunc, but as you see, that's already getting you into portability
snags.
open(TTY, "+</dev/tty") or die "no tty: $!";
system "stty cbreak </dev/tty >/dev/tty 2>&1";
$key = getc(TTY); # perhaps this works
# OR ELSE
sysread(TTY, $key, 1); # probably this does
system "stty -cbreak </dev/tty >/dev/tty 2>&1";
The Term::ReadKey module from CPAN offers an easy-to-use interface that should
be more efficient than shelling out to
stty for each key. It even
includes limited support for Windows.
use Term::ReadKey;
ReadMode('cbreak');
$key = ReadKey(0);
ReadMode('normal');
However, using the code requires that you have a working C compiler and can use
it to build and install a CPAN module. Here's a solution using the standard
POSIX module, which is already on your system (assuming your system supports
POSIX).
use HotKey;
$key = readkey();
And here's the "HotKey" module, which hides the somewhat mystifying
calls to manipulate the POSIX termios structures.
# HotKey.pm
package HotKey;
use strict;
use warnings;
use parent 'Exporter';
our @EXPORT = qw(cbreak cooked readkey);
use POSIX qw(:termios_h);
my ($term, $oterm, $echo, $noecho, $fd_stdin);
$fd_stdin = fileno(STDIN);
$term = POSIX::Termios->new();
$term->getattr($fd_stdin);
$oterm = $term->getlflag();
$echo = ECHO | ECHOK | ICANON;
$noecho = $oterm & ~$echo;
sub cbreak {
$term->setlflag($noecho); # ok, so i don't want echo either
$term->setcc(VTIME, 1);
$term->setattr($fd_stdin, TCSANOW);
}
sub cooked {
$term->setlflag($oterm);
$term->setcc(VTIME, 0);
$term->setattr($fd_stdin, TCSANOW);
}
sub readkey {
my $key = '';
cbreak();
sysread(STDIN, $key, 1);
cooked();
return $key;
}
END { cooked() }
1;
The easiest way to do this is to read a key in nonblocking mode with the
Term::ReadKey module from CPAN, passing it an argument of -1 to indicate not
to block:
use Term::ReadKey;
ReadMode('cbreak');
if (defined (my $char = ReadKey(-1)) ) {
# input was waiting and it was $char
} else {
# no input was waiting
}
ReadMode('normal'); # restore normal tty settings
How do I clear the screen?¶
(contributed by brian d foy)
To clear the screen, you just have to print the special sequence that tells the
terminal to clear the screen. Once you have that sequence, output it when you
want to clear the screen.
You can use the Term::ANSIScreen module to get the special sequence. Import the
"cls" function (or the ":screen" tag):
use Term::ANSIScreen qw(cls);
my $clear_screen = cls();
print $clear_screen;
The Term::Cap module can also get the special sequence if you want to deal with
the low-level details of terminal control. The "Tputs" method
returns the string for the given capability:
use Term::Cap;
my $terminal = Term::Cap->Tgetent( { OSPEED => 9600 } );
my $clear_string = $terminal->Tputs('cl');
print $clear_screen;
On Windows, you can use the Win32::Console module. After creating an object for
the output filehandle you want to affect, call the "Cls" method:
Win32::Console;
my $OUT = Win32::Console->new(STD_OUTPUT_HANDLE);
my $clear_string = $OUT->Cls;
print $clear_screen;
If you have a command-line program that does the job, you can call it in
backticks to capture whatever it outputs so you can use it later:
my $clear_string = `clear`;
print $clear_string;
How do I get the screen size?¶
If you have Term::ReadKey module installed from CPAN, you can use it to fetch
the width and height in characters and in pixels:
use Term::ReadKey;
my ($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize();
This is more portable than the raw "ioctl", but not as illustrative:
require 'sys/ioctl.ph';
die "no TIOCGWINSZ " unless defined &TIOCGWINSZ;
open(my $tty_fh, "+</dev/tty") or die "No tty: $!";
unless (ioctl($tty_fh, &TIOCGWINSZ, $winsize='')) {
die sprintf "$0: ioctl TIOCGWINSZ (%08x: $!)\n", &TIOCGWINSZ;
}
my ($row, $col, $xpixel, $ypixel) = unpack('S4', $winsize);
print "(row,col) = ($row,$col)";
print " (xpixel,ypixel) = ($xpixel,$ypixel)" if $xpixel || $ypixel;
print "\n";
How do I ask the user for a password?¶
(This question has nothing to do with the web. See a different FAQ for that.)
There's an example of this in "crypt" in perlfunc). First, you put the
terminal into "no echo" mode, then just read the password normally.
You may do this with an old-style "ioctl()" function, POSIX terminal
control (see POSIX or its documentation the Camel Book), or a call to the
stty program, with varying degrees of portability.
You can also do this for most systems using the Term::ReadKey module from CPAN,
which is easier to use and in theory more portable.
use Term::ReadKey;
ReadMode('noecho');
my $password = ReadLine(0);
How do I read and write the serial port?¶
This depends on which operating system your program is running on. In the case
of Unix, the serial ports will be accessible through files in
"/dev"; on other systems, device names will doubtless differ.
Several problem areas common to all device interaction are the following:
- lockfiles
- Your system may use lockfiles to control multiple access. Make sure you
follow the correct protocol. Unpredictable behavior can result from
multiple processes reading from one device.
- open mode
- If you expect to use both read and write operations on the device, you'll
have to open it for update (see "open" in perlfunc for details).
You may wish to open it without running the risk of blocking by using
"sysopen()" and "O_RDWR|O_NDELAY|O_NOCTTY" from the
Fcntl module (part of the standard perl distribution). See
"sysopen" in perlfunc for more on this approach.
- end of line
- Some devices will be expecting a "\r" at the end of each line
rather than a "\n". In some ports of perl, "\r" and
"\n" are different from their usual (Unix) ASCII values of
"\015" and "\012". You may have to give the numeric
values you want directly, using octal ("\015"), hex
("0x0D"), or as a control-character specification
("\cM").
print DEV "atv1\012"; # wrong, for some devices
print DEV "atv1\015"; # right, for some devices
Even though with normal text files a "\n" will do the trick, there
is still no unified scheme for terminating a line that is portable between
Unix, DOS/Win, and Macintosh, except to terminate ALL line ends
with "\015\012", and strip what you don't need from the output.
This applies especially to socket I/O and autoflushing, discussed
next.
- flushing output
- If you expect characters to get to your device when you
"print()" them, you'll want to autoflush that filehandle. You
can use "select()" and the $| variable to control autoflushing
(see "$|" in perlvar and "select" in perlfunc, or
perlfaq5, "How do I flush/unbuffer an output filehandle? Why must I
do this?"):
my $old_handle = select($dev_fh);
$| = 1;
select($old_handle);
You'll also see code that does this without a temporary variable, as in
select((select($deb_handle), $| = 1)[0]);
Or if you don't mind pulling in a few thousand lines of code just because
you're afraid of a little $| variable:
use IO::Handle;
$dev_fh->autoflush(1);
As mentioned in the previous item, this still doesn't work when using socket
I/O between Unix and Macintosh. You'll need to hard code your line
terminators, in that case.
- non-blocking input
- If you are doing a blocking "read()" or "sysread()",
you'll have to arrange for an alarm handler to provide a timeout (see
"alarm" in perlfunc). If you have a non-blocking open, you'll
likely have a non-blocking read, which means you may have to use a 4-arg
"select()" to determine whether I/O is ready on that device (see
"select" in perlfunc.
While trying to read from his caller-id box, the notorious Jamie Zawinski
"<jwz@netscape.com>", after much gnashing of teeth and
fighting with "sysread", "sysopen", POSIX's
"tcgetattr" business, and various other functions that go bump in
the night, finally came up with this:
sub open_modem {
use IPC::Open2;
my $stty = `/bin/stty -g`;
open2( \*MODEM_IN, \*MODEM_OUT, "cu -l$modem_device -s2400 2>&1");
# starting cu hoses /dev/tty's stty settings, even when it has
# been opened on a pipe...
system("/bin/stty $stty");
$_ = <MODEM_IN>;
chomp;
if ( !m/^Connected/ ) {
print STDERR "$0: cu printed `$_' instead of `Connected'\n";
}
}
How do I decode encrypted password files?¶
You spend lots and lots of money on dedicated hardware, but this is bound to get
you talked about.
Seriously, you can't if they are Unix password files--the Unix password system
employs one-way encryption. It's more like hashing than encryption. The best
you can do is check whether something else hashes to the same string. You
can't turn a hash back into the original string. Programs like Crack can
forcibly (and intelligently) try to guess passwords, but don't (can't)
guarantee quick success.
If you're worried about users selecting bad passwords, you should proactively
check when they try to change their password (by modifying
passwd(1),
for example).
How do I start a process in the background?¶
(contributed by brian d foy)
There's not a single way to run code in the background so you don't have to wait
for it to finish before your program moves on to other tasks. Process
management depends on your particular operating system, and many of the
techniques are covered in perlipc.
Several CPAN modules may be able to help, including IPC::Open2 or IPC::Open3,
IPC::Run, Parallel::Jobs, Parallel::ForkManager, POE, Proc::Background, and
Win32::Process. There are many other modules you might use, so check those
namespaces for other options too.
If you are on a Unix-like system, you might be able to get away with a system
call where you put an "&" on the end of the command:
system("cmd &")
You can also try using "fork", as described in perlfunc (although this
is the same thing that many of the modules will do for you).
- STDIN, STDOUT, and STDERR are shared
- Both the main process and the backgrounded one (the "child"
process) share the same STDIN, STDOUT and STDERR filehandles. If both try
to access them at once, strange things can happen. You may want to close
or reopen these for the child. You can get around this with
"open"ing a pipe (see "open" in perlfunc) but on some
systems this means that the child process cannot outlive the parent.
- Signals
- You'll have to catch the SIGCHLD signal, and possibly SIGPIPE too. SIGCHLD
is sent when the backgrounded process finishes. SIGPIPE is sent when you
write to a filehandle whose child process has closed (an untrapped SIGPIPE
can cause your program to silently die). This is not an issue with
"system("cmd&")".
- Zombies
- You have to be prepared to "reap" the child process when it
finishes.
$SIG{CHLD} = sub { wait };
$SIG{CHLD} = 'IGNORE';
You can also use a double fork. You immediately "wait()" for your
first child, and the init daemon will "wait()" for your
grandchild once it exits.
unless ($pid = fork) {
unless (fork) {
exec "what you really wanna do";
die "exec failed!";
}
exit 0;
}
waitpid($pid, 0);
See "Signals" in perlipc for other examples of code to do this.
Zombies are not an issue with "system("prog
&")".
How do I trap control characters/signals?¶
You don't actually "trap" a control character. Instead, that character
generates a signal which is sent to your terminal's currently foregrounded
process group, which you then trap in your process. Signals are documented in
"Signals" in perlipc and the section on "Signals" in the
Camel.
You can set the values of the %SIG hash to be the functions you want to handle
the signal. After perl catches the signal, it looks in %SIG for a key with the
same name as the signal, then calls the subroutine value for that key.
# as an anonymous subroutine
$SIG{INT} = sub { syswrite(STDERR, "ouch\n", 5 ) };
# or a reference to a function
$SIG{INT} = \&ouch;
# or the name of the function as a string
$SIG{INT} = "ouch";
Perl versions before 5.8 had in its C source code signal handlers which would
catch the signal and possibly run a Perl function that you had set in %SIG.
This violated the rules of signal handling at that level causing perl to dump
core. Since version 5.8.0, perl looks at %SIG
after the signal has been
caught, rather than while it is being caught. Previous versions of this answer
were incorrect.
How do I modify the shadow password file on a Unix system?¶
If perl was installed correctly and your shadow library was written properly,
the "getpw*()" functions described in perlfunc should in theory
provide (read-only) access to entries in the shadow password file. To change
the file, make a new shadow password file (the format varies from system to
system--see
passwd(1) for specifics) and use pwd_mkdb(8) to install it
(see
pwd_mkdb(8) for more details).
How do I set the time and date?¶
Assuming you're running under sufficient permissions, you should be able to set
the system-wide date and time by running the
date(1) program. (There is no way
to set the time and date on a per-process basis.) This mechanism will work for
Unix, MS-DOS, Windows, and NT; the VMS equivalent is "set time".
However, if all you want to do is change your time zone, you can probably get
away with setting an environment variable:
$ENV{TZ} = "MST7MDT"; # Unixish
$ENV{'SYS$TIMEZONE_DIFFERENTIAL'}="-5" # vms
system('trn', 'comp.lang.perl.misc');
How can I sleep() or alarm() for under a second?¶
If you want finer granularity than the 1 second that the "sleep()"
function provides, the easiest way is to use the "select()" function
as documented in "select" in perlfunc. Try the Time::HiRes and the
BSD::Itimer modules (available from CPAN, and starting from Perl 5.8
Time::HiRes is part of the standard distribution).
How can I measure time under a second?¶
(contributed by brian d foy)
The Time::HiRes module (part of the standard distribution as of Perl 5.8)
measures time with the "gettimeofday()" system call, which returns
the time in microseconds since the epoch. If you can't install Time::HiRes for
older Perls and you are on a Unixish system, you may be able to call
gettimeofday(2) directly. See "syscall" in perlfunc.
How can I do an atexit() or setjmp()/longjmp()? (Exception handling)¶
You can use the "END" block to simulate "atexit()". Each
package's "END" block is called when the program or thread ends. See
the perlmod manpage for more details about "END" blocks.
For example, you can use this to make sure your filter program managed to finish
its output without filling up the disk:
END {
close(STDOUT) || die "stdout close failed: $!";
}
The "END" block isn't called when untrapped signals kill the program,
though, so if you use "END" blocks you should also use
use sigtrap qw(die normal-signals);
Perl's exception-handling mechanism is its "eval()" operator. You can
use "eval()" as "setjmp" and "die()" as
"longjmp". For details of this, see the section on signals,
especially the time-out handler for a blocking "flock()" in
"Signals" in perlipc or the section on "Signals" in
Programming Perl.
If exception handling is all you're interested in, use one of the many CPAN
modules that handle exceptions, such as Try::Tiny.
If you want the "atexit()" syntax (and an "rmexit()" as
well), try the "AtExit" module available from CPAN.
Why doesn't my sockets program work under System V (Solaris)? What does the error message "Protocol not supported" mean?¶
Some Sys-V based systems, notably Solaris 2.X, redefined some of the standard
socket constants. Since these were constant across all architectures, they
were often hardwired into perl code. The proper way to deal with this is to
"use Socket" to get the correct values.
Note that even though SunOS and Solaris are binary compatible, these values are
different. Go figure.
How can I call my system's unique C functions from Perl?¶
In most cases, you write an external module to do it--see the answer to
"Where can I learn about linking C with Perl? [h2xs, xsubpp]".
However, if the function is a system call, and your system supports
"syscall()", you can use the "syscall" function
(documented in perlfunc).
Remember to check the modules that came with your distribution, and CPAN as
well--someone may already have written a module to do it. On Windows, try
Win32::API. On Macs, try Mac::Carbon. If no module has an interface to the C
function, you can inline a bit of C in your Perl source with Inline::C.
Where do I get the include files to do ioctl() or syscall()?¶
Historically, these would be generated by the h2ph tool, part of the standard
perl distribution. This program converts
cpp(1) directives in C header files
to files containing subroutine definitions, like "SYS_getitimer()",
which you can use as arguments to your functions. It doesn't work perfectly,
but it usually gets most of the job done. Simple files like
errno.h,
syscall.h, and
socket.h were fine, but the hard ones like
ioctl.h nearly always need to be hand-edited. Here's how to install the
*.ph files:
1. Become the super-user
2. cd /usr/include
3. h2ph *.h */*.h
If your system supports dynamic loading, for reasons of portability and sanity
you probably ought to use h2xs (also part of the standard perl distribution).
This tool converts C header files to Perl extensions. See perlxstut for how to
get started with h2xs.
If your system doesn't support dynamic loading, you still probably ought to use
h2xs. See perlxstut and ExtUtils::MakeMaker for more information (in brief,
just use
make perl instead of a plain
make to rebuild perl with
a new static extension).
Why do setuid perl scripts complain about kernel problems?¶
Some operating systems have bugs in the kernel that make setuid scripts
inherently insecure. Perl gives you a number of options (described in perlsec)
to work around such systems.
How can I open a pipe both to and from a command?¶
The IPC::Open2 module (part of the standard perl distribution) is an easy-to-use
approach that internally uses "pipe()", "fork()", and
"exec()" to do the job. Make sure you read the deadlock warnings in
its documentation, though (see IPC::Open2). See "Bidirectional
Communication with Another Process" in perlipc and "Bidirectional
Communication with Yourself" in perlipc
You may also use the IPC::Open3 module (part of the standard perl distribution),
but be warned that it has a different order of arguments from IPC::Open2 (see
IPC::Open3).
Why can't I get the output of a command with system()?¶
You're confusing the purpose of "system()" and backticks (``).
"system()" runs a command and returns exit status information (as a
16 bit value: the low 7 bits are the signal the process died from, if any, and
the high 8 bits are the actual exit value). Backticks (``) run a command and
return what it sent to STDOUT.
my $exit_status = system("mail-users");
my $output_string = `ls`;
How can I capture STDERR from an external command?¶
There are three basic ways of running external commands:
system $cmd; # using system()
my $output = `$cmd`; # using backticks (``)
open (my $pipe_fh, "$cmd |"); # using open()
With "system()", both STDOUT and STDERR will go the same place as the
script's STDOUT and STDERR, unless the "system()" command redirects
them. Backticks and "open()" read
only the STDOUT of your
command.
You can also use the "open3()" function from IPC::Open3. Benjamin
Goldberg provides some sample code:
To capture a program's STDOUT, but discard its STDERR:
use IPC::Open3;
use File::Spec;
my $in = '';
open(NULL, ">", File::Spec->devnull);
my $pid = open3($in, \*PH, ">&NULL", "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, but discard its STDOUT:
use IPC::Open3;
use File::Spec;
my $in = '';
open(NULL, ">", File::Spec->devnull);
my $pid = open3($in, ">&NULL", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, and let its STDOUT go to our own STDERR:
use IPC::Open3;
my $in = '';
my $pid = open3($in, ">&STDERR", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To read both a command's STDOUT and its STDERR separately, you can redirect them
to temp files, let the command run, then read the temp files:
use IPC::Open3;
use IO::File;
my $in = '';
local *CATCHOUT = IO::File->new_tmpfile;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3($in, ">&CATCHOUT", ">&CATCHERR", "cmd");
waitpid($pid, 0);
seek $_, 0, 0 for \*CATCHOUT, \*CATCHERR;
while( <CATCHOUT> ) {}
while( <CATCHERR> ) {}
But there's no real need for
both to be tempfiles... the following should
work just as well, without deadlocking:
use IPC::Open3;
my $in = '';
use IO::File;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3($in, \*CATCHOUT, ">&CATCHERR", "cmd");
while( <CATCHOUT> ) {}
waitpid($pid, 0);
seek CATCHERR, 0, 0;
while( <CATCHERR> ) {}
And it'll be faster, too, since we can begin processing the program's stdout
immediately, rather than waiting for the program to finish.
With any of these, you can change file descriptors before the call:
open(STDOUT, ">logfile");
system("ls");
or you can use Bourne shell file-descriptor redirection:
$output = `$cmd 2>some_file`;
open (PIPE, "cmd 2>some_file |");
You can also use file-descriptor redirection to make STDERR a duplicate of
STDOUT:
$output = `$cmd 2>&1`;
open (PIPE, "cmd 2>&1 |");
Note that you
cannot simply open STDERR to be a dup of STDOUT in your
Perl program and avoid calling the shell to do the redirection. This doesn't
work:
open(STDERR, ">&STDOUT");
$alloutput = `cmd args`; # stderr still escapes
This fails because the "open()" makes STDERR go to where STDOUT was
going at the time of the "open()". The backticks then make STDOUT go
to a string, but don't change STDERR (which still goes to the old STDOUT).
Note that you
must use Bourne shell (sh(1)) redirection syntax in
backticks, not csh(1)! Details on why Perl's "system()" and backtick
and pipe opens all use the Bourne shell are in the
versus/csh.whynot
article in the "Far More Than You Ever Wanted To Know" collection in
<
http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz> . To capture a command's
STDERR and STDOUT together:
$output = `cmd 2>&1`; # either with backticks
$pid = open(PH, "cmd 2>&1 |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDERR but discard its STDOUT:
$output = `cmd 2>&1 1>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>&1 1>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To exchange a command's STDOUT and STDERR in order to capture the STDERR but
leave its STDOUT to come out our old STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`; # either with backticks
$pid = open(PH, "cmd 3>&1 1>&2 2>&3 3>&-|");# or with an open pipe
while (<PH>) { } # plus a read
To read both a command's STDOUT and its STDERR separately, it's easiest to
redirect them separately to files, and then read from those files when the
program is done:
system("program args 1>program.stdout 2>program.stderr");
Ordering is important in all these examples. That's because the shell processes
file descriptor redirections in strictly left to right order.
system("prog args 1>tmpfile 2>&1");
system("prog args 2>&1 1>tmpfile");
The first command sends both standard out and standard error to the temporary
file. The second command sends only the old standard output there, and the old
standard error shows up on the old standard out.
Why doesn't open() return an error when a pipe open fails?¶
If the second argument to a piped "open()" contains shell
metacharacters, perl "fork()"s, then "exec()"s a shell to
decode the metacharacters and eventually run the desired program. If the
program couldn't be run, it's the shell that gets the message, not Perl. All
your Perl program can find out is whether the shell itself could be
successfully started. You can still capture the shell's STDERR and check it
for error messages. See "How can I capture STDERR from an external
command?" elsewhere in this document, or use the IPC::Open3 module.
If there are no shell metacharacters in the argument of "open()", Perl
runs the command directly, without using the shell, and can correctly report
whether the command started.
What's wrong with using backticks in a void context?¶
Strictly speaking, nothing. Stylistically speaking, it's not a good way to write
maintainable code. Perl has several operators for running external commands.
Backticks are one; they collect the output from the command for use in your
program. The "system" function is another; it doesn't do this.
Writing backticks in your program sends a clear message to the readers of your
code that you wanted to collect the output of the command. Why send a clear
message that isn't true?
Consider this line:
`cat /etc/termcap`;
You forgot to check $? to see whether the program even ran correctly. Even if
you wrote
print `cat /etc/termcap`;
this code could and probably should be written as
system("cat /etc/termcap") == 0
or die "cat program failed!";
which will echo the cat command's output as it is generated, instead of waiting
until the program has completed to print it out. It also checks the return
value.
"system" also provides direct control over whether shell wildcard
processing may take place, whereas backticks do not.
How can I call backticks without shell processing?¶
This is a bit tricky. You can't simply write the command like this:
@ok = `grep @opts '$search_string' @filenames`;
As of Perl 5.8.0, you can use "open()" with multiple arguments. Just
like the list forms of "system()" and "exec()", no shell
escapes happen.
open( GREP, "-|", 'grep', @opts, $search_string, @filenames );
chomp(@ok = <GREP>);
close GREP;
You can also:
my @ok = ();
if (open(GREP, "-|")) {
while (<GREP>) {
chomp;
push(@ok, $_);
}
close GREP;
} else {
exec 'grep', @opts, $search_string, @filenames;
}
Just as with "system()", no shell escapes happen when you
"exec()" a list. Further examples of this can be found in "Safe
Pipe Opens" in perlipc.
Note that if you're using Windows, no solution to this vexing issue is even
possible. Even though Perl emulates "fork()", you'll still be stuck,
because Windows does not have an argc/argv-style API.
Why can't my script read from STDIN after I gave it EOF (^D on Unix, ^Z on MS-DOS)?¶
This happens only if your perl is compiled to use stdio instead of perlio, which
is the default. Some (maybe all?) stdios set error and eof flags that you may
need to clear. The POSIX module defines "clearerr()" that you can
use. That is the technically correct way to do it. Here are some less reliable
workarounds:
- 1.
- Try keeping around the seekpointer and go there, like this:
my $where = tell($log_fh);
seek($log_fh, $where, 0);
- 2.
- If that doesn't work, try seeking to a different part of the file and then
back.
- 3.
- If that doesn't work, try seeking to a different part of the file, reading
something, and then seeking back.
- 4.
- If that doesn't work, give up on your stdio package and use sysread.
How can I convert my shell script to perl?¶
Learn Perl and rewrite it. Seriously, there's no simple converter. Things that
are awkward to do in the shell are easy to do in Perl, and this very
awkwardness is what would make a shell->perl converter nigh-on impossible
to write. By rewriting it, you'll think about what you're really trying to do,
and hopefully will escape the shell's pipeline datastream paradigm, which
while convenient for some matters, causes many inefficiencies.
Can I use perl to run a telnet or ftp session?¶
Try the Net::FTP, TCP::Client, and Net::Telnet modules (available from CPAN).
<
http://www.cpan.org/scripts/netstuff/telnet.emul.shar> will also help
for emulating the telnet protocol, but Net::Telnet is quite probably easier to
use.
If all you want to do is pretend to be telnet but don't need the initial telnet
handshaking, then the standard dual-process approach will suffice:
use IO::Socket; # new in 5.004
my $handle = IO::Socket::INET->new('www.perl.com:80')
or die "can't connect to port 80 on www.perl.com $!";
$handle->autoflush(1);
if (fork()) { # XXX: undef means failure
select($handle);
print while <STDIN>; # everything from stdin to socket
} else {
print while <$handle>; # everything from socket to stdout
}
close $handle;
exit;
How can I write expect in Perl?¶
Once upon a time, there was a library called
chat2.pl (part of the
standard perl distribution), which never really got finished. If you find it
somewhere,
don't use it. These days, your best bet is to look at the
Expect module available from CPAN, which also requires two other modules from
CPAN, IO::Pty and IO::Stty.
Is there a way to hide perl's command line from programs such as "ps"?¶
First of all note that if you're doing this for security reasons (to avoid
people seeing passwords, for example) then you should rewrite your program so
that critical information is never given as an argument. Hiding the arguments
won't make your program completely secure.
To actually alter the visible command line, you can assign to the variable $0 as
documented in perlvar. This won't work on all operating systems, though.
Daemon programs like sendmail place their state there, as in:
$0 = "orcus [accepting connections]";
I {changed directory, modified my environment} in a perl script. How come the change disappeared when I exited the script? How do I get my changes to be visible?¶
- Unix
- In the strictest sense, it can't be done--the script executes as a
different process from the shell it was started from. Changes to a process
are not reflected in its parent--only in any children created after the
change. There is shell magic that may allow you to fake it by
"eval()"ing the script's output in your shell; check out the
comp.unix.questions FAQ for details.
How do I close a process's filehandle without waiting for it to complete?¶
Assuming your system supports such things, just send an appropriate signal to
the process (see "kill" in perlfunc). It's common to first send a
TERM signal, wait a little bit, and then send a KILL signal to finish it off.
How do I fork a daemon process?¶
If by daemon process you mean one that's detached (disassociated from its tty),
then the following process is reported to work on most Unixish systems.
Non-Unix users should check their Your_OS::Process module for other solutions.
- •
- Open /dev/tty and use the TIOCNOTTY ioctl on it. See tty(1) for
details. Or better yet, you can just use the "POSIX::setsid()"
function, so you don't have to worry about process groups.
- •
- Change directory to /
- •
- Reopen STDIN, STDOUT, and STDERR so they're not connected to the old
tty.
- •
- Background yourself like this:
fork && exit;
The Proc::Daemon module, available from CPAN, provides a function to perform
these actions for you.
How do I find out if I'm running interactively or not?¶
(contributed by brian d foy)
This is a difficult question to answer, and the best answer is only a guess.
What do you really want to know? If you merely want to know if one of your
filehandles is connected to a terminal, you can try the "-t" file
test:
if( -t STDOUT ) {
print "I'm connected to a terminal!\n";
}
However, you might be out of luck if you expect that means there is a real
person on the other side. With the Expect module, another program can pretend
to be a person. The program might even come close to passing the Turing test.
The IO::Interactive module does the best it can to give you an answer. Its
"is_interactive" function returns an output filehandle; that
filehandle points to standard output if the module thinks the session is
interactive. Otherwise, the filehandle is a null handle that simply discards
the output:
use IO::Interactive;
print { is_interactive } "I might go to standard output!\n";
This still doesn't guarantee that a real person is answering your prompts or
reading your output.
If you want to know how to handle automated testing for your distribution, you
can check the environment. The CPAN Testers, for instance, set the value of
"AUTOMATED_TESTING":
unless( $ENV{AUTOMATED_TESTING} ) {
print "Hello interactive tester!\n";
}
How do I timeout a slow event?¶
Use the "alarm()" function, probably in conjunction with a signal
handler, as documented in "Signals" in perlipc and the section on
"Signals" in the Camel. You may instead use the more flexible
Sys::AlarmCall module available from CPAN.
The "alarm()" function is not implemented on all versions of Windows.
Check the documentation for your specific version of Perl.
How do I set CPU limits?¶
(contributed by Xho)
Use the BSD::Resource module from CPAN. As an example:
use BSD::Resource;
setrlimit(RLIMIT_CPU,10,20) or die $!;
This sets the soft and hard limits to 10 and 20 seconds, respectively. After 10
seconds of time spent running on the CPU (not "wall" time), the
process will be sent a signal (XCPU on some systems) which, if not trapped,
will cause the process to terminate. If that signal is trapped, then after 10
more seconds (20 seconds in total) the process will be killed with a
non-trappable signal.
See the BSD::Resource and your systems documentation for the gory details.
How do I avoid zombies on a Unix system?¶
Use the reaper code from "Signals" in perlipc to call
"wait()" when a SIGCHLD is received, or else use the double-fork
technique described in "How do I start a process in the background?"
in perlfaq8.
How do I use an SQL database?¶
The DBI module provides an abstract interface to most database servers and
types, including Oracle, DB2, Sybase, mysql, Postgresql, ODBC, and flat files.
The DBI module accesses each database type through a database driver, or DBD.
You can see a complete list of available drivers on CPAN:
<
http://www.cpan.org/modules/by-module/DBD/> . You can read more about
DBI on <
http://dbi.perl.org/> .
Other modules provide more specific access: Win32::ODBC, Alzabo,
"iodbc", and others found on CPAN Search:
<
http://search.cpan.org/> .
How do I make a system() exit on control-C?¶
You can't. You need to imitate the "system()" call (see perlipc for
sample code) and then have a signal handler for the INT signal that passes the
signal on to the subprocess. Or you can check for it:
$rc = system($cmd);
if ($rc & 127) { die "signal death" }
How do I open a file without blocking?¶
If you're lucky enough to be using a system that supports non-blocking reads
(most Unixish systems do), you need only to use the "O_NDELAY" or
"O_NONBLOCK" flag from the "Fcntl" module in conjunction
with "sysopen()":
use Fcntl;
sysopen(my $fh, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
or die "can't open /foo/somefile: $!":
How do I tell the difference between errors from the shell and perl?¶
(answer contributed by brian d foy)
When you run a Perl script, something else is running the script for you, and
that something else may output error messages. The script might emit its own
warnings and error messages. Most of the time you cannot tell who said what.
You probably cannot fix the thing that runs perl, but you can change how perl
outputs its warnings by defining a custom warning and die functions.
Consider this script, which has an error you may not notice immediately.
#!/usr/locl/bin/perl
print "Hello World\n";
I get an error when I run this from my shell (which happens to be bash). That
may look like perl forgot it has a "print()" function, but my
shebang line is not the path to perl, so the shell runs the script, and I get
the error.
$ ./test
./test: line 3: print: command not found
A quick and dirty fix involves a little bit of code, but this may be all you
need to figure out the problem.
#!/usr/bin/perl -w
BEGIN {
$SIG{__WARN__} = sub{ print STDERR "Perl: ", @_; };
$SIG{__DIE__} = sub{ print STDERR "Perl: ", @_; exit 1};
}
$a = 1 + undef;
$x / 0;
__END__
The perl message comes out with "Perl" in front. The "BEGIN"
block works at compile time so all of the compilation errors and warnings get
the "Perl:" prefix too.
Perl: Useless use of division (/) in void context at ./test line 9.
Perl: Name "main::a" used only once: possible typo at ./test line 8.
Perl: Name "main::x" used only once: possible typo at ./test line 9.
Perl: Use of uninitialized value in addition (+) at ./test line 8.
Perl: Use of uninitialized value in division (/) at ./test line 9.
Perl: Illegal division by zero at ./test line 9.
Perl: Illegal division by zero at -e line 3.
If I don't see that "Perl:", it's not from perl.
You could also just know all the perl errors, and although there are some people
who may know all of them, you probably don't. However, they all should be in
the perldiag manpage. If you don't find the error in there, it probably isn't
a perl error.
Looking up every message is not the easiest way, so let perl to do it for you.
Use the diagnostics pragma with turns perl's normal messages into longer
discussions on the topic.
use diagnostics;
If you don't get a paragraph or two of expanded discussion, it might not be
perl's message.
How do I install a module from CPAN?¶
(contributed by brian d foy)
The easiest way is to have a module also named CPAN do it for you by using the
"cpan" command that comes with Perl. You can give it a list of
modules to install:
$ cpan IO::Interactive Getopt::Whatever
If you prefer "CPANPLUS", it's just as easy:
$ cpanp i IO::Interactive Getopt::Whatever
If you want to install a distribution from the current directory, you can tell
"CPAN.pm" to install "." (the full stop):
$ cpan .
See the documentation for either of those commands to see what else you can do.
If you want to try to install a distribution by yourself, resolving all
dependencies on your own, you follow one of two possible build paths.
For distributions that use
Makefile.PL:
$ perl Makefile.PL
$ make test install
For distributions that use
Build.PL:
$ perl Build.PL
$ ./Build test
$ ./Build install
Some distributions may need to link to libraries or other third-party code and
their build and installation sequences may be more complicated. Check any
README or
INSTALL files that you may find.
What's the difference between require and use?¶
(contributed by brian d foy)
Perl runs "require" statement at run-time. Once Perl loads, compiles,
and runs the file, it doesn't do anything else. The "use" statement
is the same as a "require" run at compile-time, but Perl also calls
the "import" method for the loaded package. These two are the same:
use MODULE qw(import list);
BEGIN {
require MODULE;
MODULE->import(import list);
}
However, you can suppress the "import" by using an explicit, empty
import list. Both of these still happen at compile-time:
use MODULE ();
BEGIN {
require MODULE;
}
Since "use" will also call the "import" method, the actual
value for "MODULE" must be a bareword. That is, "use"
cannot load files by name, although "require" can:
require "$ENV{HOME}/lib/Foo.pm"; # no @INC searching!
See the entry for "use" in perlfunc for more details.
How do I keep my own module/library directory?¶
When you build modules, tell Perl where to install the modules.
If you want to install modules for your own use, the easiest way might be
local::lib, which you can download from CPAN. It sets various installation
settings for you, and uses those same settings within your programs.
If you want more flexibility, you need to configure your CPAN client for your
particular situation.
For "Makefile.PL"-based distributions, use the INSTALL_BASE option
when generating Makefiles:
perl Makefile.PL INSTALL_BASE=/mydir/perl
You can set this in your "CPAN.pm" configuration so modules
automatically install in your private library directory when you use the
CPAN.pm shell:
% cpan
cpan> o conf makepl_arg INSTALL_BASE=/mydir/perl
cpan> o conf commit
For "Build.PL"-based distributions, use the --install_base option:
perl Build.PL --install_base /mydir/perl
You can configure "CPAN.pm" to automatically use this option too:
% cpan
cpan> o conf mbuild_arg "--install_base /mydir/perl"
cpan> o conf commit
INSTALL_BASE tells these tools to put your modules into
/mydir/perl/lib/perl5. See "How do I add a directory to my include
path (@INC) at runtime?" for details on how to run your newly installed
modules.
There is one caveat with INSTALL_BASE, though, since it acts differently from
the PREFIX and LIB settings that older versions of ExtUtils::MakeMaker
advocated. INSTALL_BASE does not support installing modules for multiple
versions of Perl or different architectures under the same directory. You
should consider whether you really want that and, if you do, use the older
PREFIX and LIB settings. See the ExtUtils::Makemaker documentation for more
details.
How do I add the directory my program lives in to the module/library search path?¶
(contributed by brian d foy)
If you know the directory already, you can add it to @INC as you would for any
other directory. You might <use lib> if you know the directory at
compile time:
use lib $directory;
The trick in this task is to find the directory. Before your script does
anything else (such as a "chdir"), you can get the current working
directory with the "Cwd" module, which comes with Perl:
BEGIN {
use Cwd;
our $directory = cwd;
}
use lib $directory;
You can do a similar thing with the value of $0, which holds the script name.
That might hold a relative path, but "rel2abs" can turn it into an
absolute path. Once you have the
BEGIN {
use File::Spec::Functions qw(rel2abs);
use File::Basename qw(dirname);
my $path = rel2abs( $0 );
our $directory = dirname( $path );
}
use lib $directory;
The FindBin module, which comes with Perl, might work. It finds the directory of
the currently running script and puts it in $Bin, which you can then use to
construct the right library path:
use FindBin qw($Bin);
You can also use local::lib to do much of the same thing. Install modules using
local::lib's settings then use the module in your program:
use local::lib; # sets up a local lib at ~/perl5
See the local::lib documentation for more details.
How do I add a directory to my include path (@INC) at runtime?¶
Here are the suggested ways of modifying your include path, including
environment variables, run-time switches, and in-code statements:
- the "PERLLIB" environment variable
-
$ export PERLLIB=/path/to/my/dir
$ perl program.pl
- the "PERL5LIB" environment variable
-
$ export PERL5LIB=/path/to/my/dir
$ perl program.pl
- the "perl -Idir" command line flag
-
$ perl -I/path/to/my/dir program.pl
- the "lib" pragma:
-
use lib "$ENV{HOME}/myown_perllib";
- the local::lib module:
-
use local::lib;
use local::lib "~/myown_perllib";
The last is particularly useful because it knows about machine-dependent
architectures. The "lib.pm" pragmatic module was first included with
the 5.002 release of Perl.
Where are modules installed?¶
Modules are installed on a case-by-case basis (as provided by the methods
described in the previous section), and in the operating system. All of these
paths are stored in @INC, which you can display with the one-liner
perl -e 'print join("\n",@INC,"")'
The same information is displayed at the end of the output from the command
perl -V
To find out where a module's source code is located, use
perldoc -l Encode
to display the path to the module. In some cases (for example, the
"AutoLoader" module), this command will show the path to a separate
"pod" file; the module itself should be in the same directory, with
a 'pm' file extension.
What is socket.ph and where do I get it?¶
It's a Perl 4 style file defining values for system networking constants.
Sometimes it is built using h2ph when Perl is installed, but other times it is
not. Modern programs should use "use Socket;" instead.
AUTHOR AND COPYRIGHT¶
Copyright (c) 1997-2010 Tom Christiansen, Nathan Torkington, and other authors
as noted. All rights reserved.
This documentation is free; you can redistribute it and/or modify it under the
same terms as Perl itself.
Irrespective of its distribution, all code examples in this file are hereby
placed into the public domain. You are permitted and encouraged to use this
code in your own programs for fun or for profit as you see fit. A simple
comment in the code giving credit would be courteous but is not
required.