table of contents
MODBUS_REPORT_SLAVE_(3) | Libmodbus Manual | MODBUS_REPORT_SLAVE_(3) |
NAME¶
modbus_report_slave_id - returns a description of the controllerSYNOPSIS¶
int modbus_report_slave_id(modbus_t *ctx, uint8_t *dest);DESCRIPTION¶
The modbus_report_slave_id() function shall send a request to the controller to obtain a description of the controller. The response stored in dest contains:•the byte count of the response
•the slave ID, this unique ID is in reality not
unique at all so it’s not possible to depend on it to know how the
information are packed in the response.
•the run indicator status (0x00 = OFF, 0xFF =
ON)
•additional data specific to each controller. For
example, libmodbus returns the version of the library as a string.
RETURN VALUE¶
The modbus_report_slave_id() function shall return the number of read data if successful. Otherwise it shall return -1 and set errno.EXAMPLE¶
uint8_t *tab_bytes; ... rc = modbus_report_slave_id(ctx, tab_bytes); if (rc > 1) { printf("Run Status Indicator: %s\n", tab_bytes[1] ? "ON" : "OFF"); }
AUTHORS¶
The libmodbus documentation was written by Stéphane Raimbault < stephane.raimbault@gmail.com[1]>NOTES¶
- 1.
- stephane.raimbault@gmail.com
mailto:stephane.raimbault@gmail.com
10/18/2014 | libmodbus 3.0.6 |