NAME¶
Math::Prime::Util::PrimeArray - A tied array for primes
VERSION¶
Version 0.46
SYNOPSIS¶
use Math::Prime::Util::PrimeArray;
# Create:
tie my @primes, 'Math::Prime::Util::PrimeArray';
# Use in a loop by index:
for my $n (0..9) {
print "prime $n = $primes[$n]\n";
}
# Use in a loop over array:
for my $p (@primes) {
last if $p > 1000; # stop sometime
print "$p\n";
}
# Use via array slice:
print join(",", @primes[0..49]), "\n";
# Use via each:
use 5.012;
while( my($index,$value) = each @primes ) {
last if $value > 1000; # stop sometime
print "The ${index}th prime is $value\n";
}
# Use with shift:
while ((my $p = shift @primes) < 1000) {
print "$p\n";
}
DESCRIPTION¶
An array that acts like the infinite set of primes. This may be more convenient
than using Math::Prime::Util directly, and in some cases it can be faster than
calling "next_prime" and "prev_prime".
If the access pattern is ascending or descending, then a window is sieved and
results returned from the window as needed. If the access pattern is random,
then "nth_prime" is used.
Shifting acts like the array is losing elements at the front, so after two
shifts, "$primes[0] == 5". Unshift will move the internal shift
index back one, unless given an argument which is the number to move back. It
will not shift past the beginning, so "unshift @primes, ~0" is a
useful way to reset from any shifts.
Example:
say shift @primes; # 2
say shift @primes; # 3
say shift @primes; # 5
say $primes[0]; # 7
unshift @primes; # back up one
say $primes[0]; # 5
unshift @primes, 2; # back up two
say $primes[0]; # 2
If you want sequential primes with low memory, I recommend using
"forprimes" in Math::Prime::Util. It is much faster, as the tied
array functionality in Perl is not high performance. It isn't as flexible as
the prime array, but it is a very common pattern.
If you prefer an iterator pattern, I would recommend using
"prime_iterator" in Math::Prime::Util. It will be a bit faster than
using this tied array, but of course you don't get random access. If you find
yourself using the "shift" operation, consider the iterator.
LIMITATIONS¶
The size of the array will always be shown as 2147483647 (IV32 max), even in a
64-bit environment where primes through "2^64" are available.
Some people find the idea of shifting a prime array abhorrent, as after two
shifts, "the second prime is 7?!". If this bothers you, do not use
"shift" on the tied array.
MPU forprimes: forprimes { $sum += $_ } nth_prime(100_000);
MPU iterator: my $it = prime_iterator; $sum += $it->() for 1..100000;
MPU array: $sum = vecsum( @{primes(nth_prime(100_000))} );
MPUPA: tie my @primes, ...; $sum += $primes[$_] for 0..99999;
MNSP: my $seq = Math::NumSeq::Primes->new;
$sum += ($seq->next)[1] for 1..100000;
MPTA: tie my @primes, ...; $sum += $primes[$_] for 0..99999;
List::Gen $sum = primes->take(100000)->sum
Memory use is comparing the delta between just loading the module and running
the test. Perl 5.20.0, Math::NumSeq v70, Math::Prime::TiedArray v0.04,
List::Gen 0.974.
Summing the first 0.1M primes via walking the array:
6ms 56k Math::Prime::Util forprimes
7ms 4 MB Math::Prime::Util sum big array
110ms 0 Math::Prime::Util prime_iterator
155ms 644k Math::Prime::Util::PrimeArray
120ms 1476k Math::NumSeq::Primes sequence iterator
4656ms 32 MB List::Gen sequence
7540ms 61 MB Math::Prime::TiedArray (extend 1k)
Summing the first 1M primes via walking the array:
0.07s 268k Math::Prime::Util forprimes
0.09s 41 MB Math::Prime::Util sum big array
1.4s 0 Math::Prime::Util prime_iterator
1.6s 644k Math::Prime::Util::PrimeArray
7.1s 2428k Math::NumSeq::Primes sequence iterator
91.3s 93 MB List::Gen sequence
108.4s 760 MB Math::Prime::TiedArray (extend 1k)
Summing the first 10M primes via walking the array:
0.7s 432k Math::Prime::Util forprimes
0.9s 394 MB Math::Prime::Util sum big array
16.9s 0 Math::Prime::Util prime_iterator
15.4s 772k Math::Prime::Util::PrimeArray
3680 s 11.1MB Math::NumSeq::Primes sequence iterator
5555 s 874 MB List::Gen sequence
>5000 MB Math::Primes::TiedArray (extend 1k)
Math::Prime::Util offers three obvious solutions: a big array, an iterator, and
the "forprimes" construct. The big array is fast but uses a
lot of memory, forcing the user to start programming segments. Using
the iterator avoids all the memory use, but isn't as fast (this may improve in
a later release, as this is a new feature). The "forprimes"
construct is both fast and low memory, but it isn't quite as flexible as the
iterator (most notably there is no way to exit early, and it doesn't lend
itself to wrapping inside a filter).
Math::NumSeq::Primes offers an iterator alternative, and works quite well as
long as you don't need lots of primes. It does not support random access. It
has reasonable performance for the first few hundred thousand, but each
successive value takes much longer to generate, and once past 1 million it
isn't very practical.
Math::Primes::TiedArray is remarkably impractical for anything other than tiny
numbers.
List::Gen includes a built-in prime sequence. It uses an inefficient Perl sieve
for numbers below 10M and has some performance defects when getting large
numbers of primes.
SEE ALSO¶
This module uses Math::Prime::Util to do all the work. If you're doing anything
but retrieving primes, you should examine that module to see if it has
functionality you can use directly, as it may be a lot faster or easier.
Similar functionality can be had from Math::NumSeq and Math::Prime::TiedArray.
AUTHORS¶
Dana Jacobsen <dana@acm.org>
COPYRIGHT¶
Copyright 2012-2013 by Dana Jacobsen <dana@acm.org>
This program is free software; you can redistribute it and/or modify it under
the same terms as Perl itself.