.\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH RIGD "8" "February 24, 2007" "Hamlib" "RPC Rig Daemon" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME rigd \- Hamlib rig service daemon .SH SYNOPSIS .B rpc.rigd [\fIOPTION\fR]... .SH DESCRIPTION The \fBrigd\fP program is a \fBHamlib\fP rig daemon that handles RPC client requests. This allows multiple user programs to share one radio. At this time multiple radio support is not available (help needed!). .PP .\" TeX users may be more comfortable with the \fB\fP and .\" \fI\fP escape sequences to invoke bold face and italics, .\" respectively. Keep in mind that \fBHamlib\fP is BETA level software. While a lot of backend libraries lack complete rig support, the basic functions are usually well supported. The API may change without publicized notice, while an advancement of the minor version (e.g. 1.1.x to 1.2.x) indicates such a change. .PP Please report bugs and provide feedback at the e-mail address given in the REPORTING BUGS section. Patches and code enhancements are also welcome. .SH OPTIONS This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). Here is a summary of the supported options: .TP .B \-m, --model=id Select radio model number. See rig model list (use 'rigctl -l'). .br NB: \fBrigctl\fP (or third party software) will use rig model 1901 when using \fBrigd\fP. .TP .B \-r, --rig-file=device Use \fIdevice\fP as the file name of the port the radio is connected. Often a serial port, but could be a USB to serial adapter. Typically /dev/ttyS0, /dev/ttyS1, /dev/ttyUSB0, etc. .TP .B \-p, --ptt-file=device Use \fIdevice\fP as the file name of the Push-To-Talk device using a device file as described above. .TP .B \-d, --dcd-file=device Use \fIdevice\fP as the file name of the Data Carrier Detect device using a device file as described above. .TP .B \-p, --ptt-type=type Use \fItype\fP of Push-To-Talk device. Supported types are RIG, DTR, RTS, PARALLEL, NONE. .TP .B \-d, --dcd-type=type Use \fItype\fP of Data Carrier Detect device. Supported types are RIG, DSR, CTS, CD, PARALLEL, NONE. .TP .B \-s, --serial-speed=baud Set serial speed to \fIbaud\fP rate. Uses maximum serial speed from rig backend capabilities as the default. .TP .B \-c, --civaddr=id Use \fIid\fP as the CI-V address to communicate with the rig. Only useful for Icom rigs. .br NB: the \fIid\fP is in decimal notation, unless prefixed by \fI0x\fP, in which case it is hexadecimal. .TP .B \-C, --set-conf=parm=val[,parm=val]* Set config parameter. e.g. stop_bits=2 .br Use -L option of \fBrigctl\fP for a list. .TP .B \-t, --prog=number Use \fInumber\fP as the RPC program number. The default is 536871065. .TP .B \-v, --verbose Set verbose mode, cumulative (see DIAGNOSTICS below). .TP .B \-h, --help Show a summary of these options and exit. .TP .B \-V, --version Show the version of \fBrigd\fP and exit. .PP Please note that the backend for the radio to be controlled, or the radio itself may not support some commands. In that case, the operation will fail with a \fBHamlib\fP error code. .SH EXAMPLES Start \fBrigd\fP as root for a Yaesu FT-920 using a USB to serial adapter and backgrounding: .PP # rpc.rigd -m 114 -r /dev/ttyUSB1 & .PP Start \fBrigd\fP as root for a Yaesu FT-920 using COM1 while generating TRACE output: .PP # rpc.rigd -m 114 -r /dev/ttyS0 -vvvvv .PP Start \fBrigd\fP as root for a Yaesu FT-920 using a USB to serial adapter while setting baud rate and stop bits and backgrounding: .PP # rpc.rigd -m 114 -r /dev/ttyUSB1 -s 4800 -C stop_bits=2 & .SH DIAGNOSTICS The \fB-v\fP, \fB--version\fP option allows different levels of diagnostics to be output to \fBstderr\fP and correspond to -v for BUG, -vv for ERR, -vvv for WARN, -vvvv for VERBOSE, or -vvvvv for TRACE. .PP A given verbose level is useful for providing needed debugging information to the email address below. For example, TRACE output shows all of the values sent to and received from the radio which is very useful for radio backend library development and may be requested by the developers. .SH SECURITY No authentication whatsoever; could be done through domain restriction, though. Please ask if stronger security is needed. .SH BUGS Does not support more than one rig that share the same serial port (e.g. Icom radios on a CI-V bus). .PP Does not support more than one communication device for multiple rig control. (e.g. for Single Operator 2 Radio) Help needed! .SH REPORTING BUGS Report bugs to . .br We are already aware of the bugs in the previous section :-) .SH AUTHORS Written by Stephane Fillod and the Hamlib Group .br . .SH COPYRIGHT Copyright \(co 2000-2007 Stephane Fillod and the Hamlib Group. .PP This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. .SH SEE ALSO .BR rigctl (1), .BR hamlib (3)