NAME¶
Config::Model::models::LCDd::glcd - Configuration class LCDd::glcd
DESCRIPTION¶
Configuration classes used by Config::Model
generated from LCDd.conf
Elements¶
Brightness¶
Set brightness of the backlight if the backlight is switched 'on'.
Optional.
Type integer. upstream_default: '800'.
CellSize¶
Width and height of a character cell in pixels. This value is only used if the
driver has been compiled with FreeType and it is enabled. Otherwise the
default 6x8 cell is used.
Optional. Type uniline. upstream_default:
'12x16'.
ConnectionType¶
Select what type of connection. See documentation for types.
Optional. Type
uniline. default: 't6963'.
Contrast¶
Set the initial contrast if supported by connection type.
Optional. Type
integer. upstream_default: '600'.
KeyMap_A¶
Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'. By
default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape.
Optional. Type uniline. default: 'Up'.
KeyMap_B¶
Optional. Type uniline. default: 'Down'.
KeyMap_C¶
Optional. Type uniline. default: 'Enter'.
KeyMap_D¶
Optional. Type uniline. default: 'Escape'.
KeyRepeatDelay¶
Time (ms) from first key report to first repeat. Set to 0 to disable repeated
key reports.
Optional. Type integer. upstream_default: '500'.
KeyRepeatInterval¶
Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled
(set to zero).
Optional. Type integer. upstream_default: '300'.
OffBrightness¶
Set brightness of the backlight if the backlight is switched 'off'. Set this to
zero to completely turn off the backlight.
Optional. Type integer.
upstream_default: '100'.
Port¶
--- t6963 options --- Parallel port to use legal: 0x200-0x400
Optional. Type
uniline. upstream_default: '0x378'.
Size¶
Width and height of the display in pixel. The supported sizes may depend on the
ConnectionType. legal: 1x1-640x480
Optional. Type uniline.
upstream_default: '128x64'.
bidirectional¶
Use LPT port in bi-directional mode. This should work on most LPT port and is
required for proper timing!
Optional. Type boolean. upstream_default:
'yes'.
delayBus¶
Insert additional delays into reads / writes.
Optional. Type boolean.
upstream_default: 'no'.
fontHasIcons¶
Some fonts miss the Unicode characters used to represent icons. In this case the
built-in 5x8 font can used if this option is turned off.
Optional. Type
boolean. upstream_default: 'yes'.
normal_font¶
Path to font file to use for FreeType rendering. This font must be monospace and
should contain some special Unicode characters like arrows (Andale Mono is
recommended and can be fetched at
http://corefonts.sf.net). Optional. Type
uniline. upstream_default: '/usr/local/lib/X11/fonts/TTF/andalemo.ttf'.
picolcdgfx_Inverted¶
Inverted: Inverts the pixels.
Optional. Type enum. choice: 'yesorno'.
upstream_default: 'no'.
picolcdgfx_KeyTimeout¶
--- picolcdgfx options --- Time in ms for usb_read to wait on a key press.
Optional. Type integer. upstream_default: '125'.
serdisp_device¶
The display device to use, e.g. serraw:/dev/ttyS0, parport:/dev/parport0 or
USB:07c0/1501.
Optional. Type uniline. default: '/dev/ppi0'.
serdisp_name¶
--- serdisplib options --- Name of the underlying serdisplib driver, e.g.
ctinclud. See serdisplib documentation for details.
Optional. Type uniline.
default: 't6963'.
serdisp_options¶
Options string to pass to serdisplib during initialization. Use this to set any
display related options (e.g. wiring). The display size is always set based on
the Size configured above! By default, no options are set. Important: The
value must be quoted as it contains equal signs!
Optional. Type uniline.
upstream_default: 'INVERT=1'.
useFT2¶
If LCDproc has been compiled with FreeType 2 support this option can be used to
turn if off intentionally.
Optional. Type boolean. upstream_default:
'yes'.
x11_BacklightColor¶
BacklightColor: The color of the backlight as full brightness.
Optional. Type
uniline. upstream_default: '0x80FF80'.
x11_Border¶
Border: Adds a border (empty space) around the LCD portion of X11 window.
Optional. Type uniline. upstream_default: '20'.
x11_Inverted¶
Inverted: inverts the pixels
Optional. Type boolean. upstream_default:
'no'.
x11_PixelColor¶
Colors are in RRGGBB format prefixed with "0x". PixelColor: The color
of each dot at full contrast.
Optional. Type uniline. upstream_default:
'0x000000'.
x11_PixelSize¶
--- x11 options --- PixelSize is size of each dot in pixels + a pixel gap.
Optional. Type uniline. upstream_default: '3+1'.
SEE ALSO¶
- •
- cme