NAME¶
Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx
DESCRIPTION¶
Configuration classes used by Config::Model
generated from LCDd.conf
Elements¶
Device¶
Select the output device to use
Optional. Type uniline. upstream_default:
'/dev/lcd'.
Keypad¶
If you have a keypad connected. Keypad layout is currently not configureable
from the config file.
Optional. Type uniline. default: 'yes'.
Model¶
Select the LCD model
Optional. Type enum. choice: '12232', '12832', '1602'.
upstream_default: '12232'.
Reboot¶
Reinitialize the LCD's BIOS normally you shouldn't need this.
Optional. Type
boolean. upstream_default: 'no'.
Size¶
Select the LCD size. Default depends on model: 12232: 20x4 12832: 21x4 1602:
16x2.
Optional. Type uniline. default: '20x4'.
Speed¶
Set the communication speed
Optional. Type enum. choice: '9600', '19200'.
upstream_default: '19200'.
keypad_test_mode¶
If you have a non-standard keypad you can associate any keystrings to keys.
There are 6 input keys in the CwLnx hardware that generate characters from 'A'
to 'F'.
The following is the built-in default mapping hardcoded in the driver. You can
leave those unchanged if you have a standard keypad. You can change it if you
want to report other keystrings or have a non standard keypad. KeyMap_A=Up
KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right KeyMap_E=Enter KeyMap_F=Escape
keypad_test_mode permits one to test keypad assignment Default value is no.
Optional. Type uniline. upstream_default: 'yes'.
SEE ALSO¶
- •
- cme