other sections
CPIO(5) | File Formats Manual | CPIO(5) |
NAME¶
cpio
—
format of cpio archive files
DESCRIPTION¶
Thecpio
archive format collects any number
of files, directories, and other file system objects (symbolic links, device
nodes, etc.) into a single stream of bytes.
General Format¶
Each file system object in acpio
archive
comprises a header record with basic numeric metadata followed by the full
pathname of the entry and the file data. The header record stores a series of
integer values that generally follow the fields in
struct stat. (See
stat(2) for details.) The variants differ
primarily in how they store those integers (binary, octal, or hexadecimal).
The header is followed by the pathname of the entry (the length of the
pathname is stored in the header) and any file data. The end of the archive is
indicated by a special record with the pathname “TRAILER!!!”.
PWB format¶
XXX Any documentation of the original PWB/UNIX 1.0 format? XXXOld Binary Format¶
The old binarycpio
format stores numbers as
2-byte and 4-byte binary values. Each entry begins with a header in the
following format:
struct header_old_cpio { unsigned short c_magic; unsigned short c_dev; unsigned short c_ino; unsigned short c_mode; unsigned short c_uid; unsigned short c_gid; unsigned short c_nlink; unsigned short c_rdev; unsigned short c_mtime[2]; unsigned short c_namesize; unsigned short c_filesize[2]; };
- magic
- The integer value octal 070707. This value can be used to determine whether this archive is written with little-endian or big-endian integers.
- dev, ino
- The device and inode numbers from the disk. These are used by programs
that read
cpio
archives to determine when two entries refer to the same file. Programs that synthesizecpio
archives should be careful to set these to distinct values for each entry. - mode
- The mode specifies both the regular permissions and the file type. It
consists of several bit fields as follows:
- 0170000
- This masks the file type bits.
- 0140000
- File type value for sockets.
- 0120000
- File type value for symbolic links. For symbolic links, the link body is stored as file data.
- 0100000
- File type value for regular files.
- 0060000
- File type value for block special devices.
- 0040000
- File type value for directories.
- 0020000
- File type value for character special devices.
- 0010000
- File type value for named pipes or FIFOs.
- 0004000
- SUID bit.
- 0002000
- SGID bit.
- 0001000
- Sticky bit. On some systems, this modifies the behavior of executables and/or directories.
- 0000777
- The lower 9 bits specify read/write/execute permissions for world, group, and user following standard POSIX conventions.
- uid, gid
- The numeric user id and group id of the owner.
- nlink
- The number of links to this file. Directories always have a value of at least two here. Note that hardlinked files include file data with every copy in the archive.
- rdev
- For block special and character special entries, this field contains the associated device number. For all other entry types, it should be set to zero by writers and ignored by readers.
- mtime
- Modification time of the file, indicated as the number of seconds since the start of the epoch, 00:00:00 UTC January 1, 1970. The four-byte integer is stored with the most-significant 16 bits first followed by the least-significant 16 bits. Each of the two 16 bit values are stored in machine-native byte order.
- namesize
- The number of bytes in the pathname that follows the header. This count includes the trailing NUL byte.
- filesize
- The size of the file. Note that this archive format is limited to four gigabyte file sizes. See mtime above for a description of the storage of four-byte integers.
namesize
is odd, an additional NUL byte is
added after the pathname. The file data is then appended, padded with NUL
bytes to an even length.
Hardlinked files are not given special treatment; the full file contents are
included with each copy of the file.
Portable ASCII Format¶
Version 2 of the Single UNIX Specification (“SUSv2”) standardized an ASCII variant that is portable across all platforms. It is commonly known as the “old character” format or as the “odc” format. It stores the same numeric fields as the old binary format, but represents them as 6-character or 11-character octal values.struct cpio_odc_header { char c_magic[6]; char c_dev[6]; char c_ino[6]; char c_mode[6]; char c_uid[6]; char c_gid[6]; char c_nlink[6]; char c_rdev[6]; char c_mtime[11]; char c_namesize[6]; char c_filesize[11]; };
New ASCII Format¶
The "new" ASCII format uses 8-byte hexadecimal fields for all numbers and separates device numbers into separate fields for major and minor numbers.struct cpio_newc_header { char c_magic[6]; char c_ino[8]; char c_mode[8]; char c_uid[8]; char c_gid[8]; char c_nlink[8]; char c_mtime[8]; char c_filesize[8]; char c_devmajor[8]; char c_devminor[8]; char c_rdevmajor[8]; char c_rdevminor[8]; char c_namesize[8]; char c_check[8]; };
- magic
- The string “070701”.
- check
- This field is always set to zero by writers and ignored by readers. See the next section for more details.
New CRC Format¶
The CRC format is identical to the new ASCII format described in the previous section except that the magic field is set to “070702” and the check field is set to the sum of all bytes in the file data. This sum is computed treating all bytes as unsigned values and using unsigned arithmetic. Only the least-significant 32 bits of the sum are stored.HP variants¶
Thecpio
implementation distributed with HPUX
used XXXX but stored device numbers differently XXX.
Other Extensions and Variants¶
Sun Solaris uses additional file types to store extended file data, including ACLs and extended attributes, as special entries in cpio archives. XXX Others? XXXSEE ALSO¶
cpio(1), tar(5)STANDARDS¶
Thecpio
utility is no longer a part of POSIX
or the Single Unix Standard. It last appeared in
Version 2 of the Single UNIX Specification
(“SUSv2”). It has been supplanted in subsequent standards
by pax(1). The portable ASCII format is currently
part of the specification for the pax(1) utility.
HISTORY¶
The original cpio utility was written by Dick Haight while working in AT&T's Unix Support Group. It appeared in 1977 as part of PWB/UNIX 1.0, the “Programmer's Work Bench” derived from Version 6 AT&T UNIX that was used internally at AT&T. Both the old binary and old character formats were in use by 1980, according to the System III source released by SCO under their “Ancient Unix” license. The character format was adopted as part of IEEE Std 1003.1-1988 (“POSIX.1”). XXX when did "newc" appear? Who invented it? When did HP come out with their variant? When did Sun introduce ACLs and extended attributes? XXXBUGS¶
The “CRC” format is mis-named, as it uses a simple checksum and not a cyclic redundancy check. The old binary format is limited to 16 bits for user id, group id, device, and inode numbers. It is limited to 4 gigabyte file sizes. The old ASCII format is limited to 18 bits for the user id, group id, device, and inode numbers. It is limited to 8 gigabyte file sizes. The new ASCII format is limited to 4 gigabyte file sizes. None of the cpio formats store user or group names, which are essential when moving files between systems with dissimilar user or group numbering. Especially when writing older cpio variants, it may be necessary to map actual device/inode values to synthesized values that fit the available fields. With very large filesystems, this may be necessary even for the newer formats.December 23, 2011 | Debian |