.\" $NetBSD: setkey.8,v 1.26 2010/12/03 14:32:52 tteras Exp $ .\" .\" Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the project nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd June 4, 2010 .Dt SETKEY 8 .Os .\" .Sh NAME .Nm setkey .Nd manually manipulate the IPsec SA/SP database .\" .Sh SYNOPSIS .Nm setkey .Op Fl knrv .Ar file ... .Nm setkey .Op Fl knrv .Fl c .Nm setkey .Op Fl krv .Fl f Ar filename .Nm setkey .Op Fl aklPrv .Fl D .Nm setkey .Op Fl Pvp .Fl F .Nm setkey .Op Fl H .Fl x .Nm setkey .Op Fl ?V .\" .Sh DESCRIPTION .Nm adds, updates, dumps, or flushes Security Association Database (SAD) entries as well as Security Policy Database (SPD) entries in the kernel. .Pp .Nm takes a series of operations from standard input .Po if invoked with .Fl c .Pc or the file named .Ar filename .Po if invoked with .Fl f Ar filename .Pc . .Bl -tag -width Ds .It (no flag) Dump the SAD entries or SPD entries contained in the specified .Ar file . .It Fl ? Print short help. .It Fl a .Nm usually does not display dead SAD entries with .Fl D . If .Fl a is also specified, the dead SAD entries will be displayed as well. A dead SAD entry is one that has expired but remains in the system because it is referenced by some SPD entries. .It Fl D Dump the SAD entries. If .Fl P is also specified, the SPD entries are dumped. If .Fl p is specified, the ports are displayed. .It Fl F Flush the SAD entries. If .Fl P is also specified, the SPD entries are flushed. .It Fl H Add hexadecimal dump in .Fl x mode. .It Fl h On .Nx , synonym for .Fl H . On other systems, synonym for .Fl ? . .It Fl k Use semantics used in kernel. Available only in Linux. See also .Fl r . .It Fl l Loop forever with short output on .Fl D . .It Fl n No action. The program will check validity of the input, but no changes to the SPD will be made. .It Fl r Use semantics described in IPsec RFCs. This mode is default. For details see section .Sx RFC vs Linux kernel semantics . Available only in Linux. See also .Fl k . .It Fl x Loop forever and dump all the messages transmitted to the .Dv PF_KEY socket. .Fl xx prints the unformatted timestamps. .It Fl V Print version string. .It Fl v Be verbose. The program will dump messages exchanged on the .Dv PF_KEY socket, including messages sent from other processes to the kernel. .El .Ss Configuration syntax With .Fl c or .Fl f on the command line, .Nm accepts the following configuration syntax. Lines starting with hash signs .Pq Sq # are treated as comment lines. .Bl -tag -width Ds .It Li add Oo Fl 46n Oc Ar src Ar dst Ar protocol Ar spi \ Oo Ar extensions Oc Ar algorithm ... Li ; Add an SAD entry. .Li add can fail for multiple reasons, including when the key length does not match the specified algorithm. .\" .It Li get Oo Fl 46n Oc Ar src Ar dst Ar protocol Ar spi Li ; Show an SAD entry. .\" .It Li delete Oo Fl 46n Oc Ar src Ar dst Ar protocol Ar spi Li ; Remove an SAD entry. .\" .It Li deleteall Oo Fl 46n Oc Ar src Ar dst Ar protocol Li ; Remove all SAD entries that match the specification. .\" .It Li flush Oo Ar protocol Oc Li ; Clear all SAD entries matched by the options. .Fl F on the command line achieves the same functionality. .\" .It Li dump Oo Ar protocol Oc Li ; Dumps all SAD entries matched by the options. .Fl D on the command line achieves the same functionality. .\" .It Li spdadd Oo Fl 46n Oc Ar src_range Ar dst_range Ar upperspec \ Ar label Ar policy Li ; Add an SPD entry. .\" .It Li spdadd tagged Ar tag Ar policy Li ; Add an SPD entry based on a PF tag. .Ar tag must be a string surrounded by double quotes. .\" .It Li spdupdate Oo Fl 46n Oc Ar src_range Ar dst_range Ar upperspec \ Ar label Ar policy Li ; Updates an SPD entry. .\" .It Li spdupdate tagged Ar tag Ar policy Li ; Update an SPD entry based on a PF tag. .Ar tag must be a string surrounded by double quotes. .\" .It Li spddelete Oo Fl 46n Oc Ar src_range Ar dst_range Ar upperspec \ Fl P Ar direction Li ; Delete an SPD entry. .\" .It Li spdflush Li ; Clear all SPD entries. .Fl FP on the command line achieves the same functionality. .\" .It Li spddump Li ; Dumps all SPD entries. .Fl DP on the command line achieves the same functionality. .El .\" .Pp Meta-arguments are as follows: .Pp .Bl -tag -compact -width Ds .It Ar src .It Ar dst Source/destination of the secure communication is specified as an IPv4/v6 address, and an optional port number between square brackets. .Nm can resolve a FQDN into numeric addresses. If the FQDN resolves into multiple addresses, .Nm will install multiple SAD/SPD entries into the kernel by trying all possible combinations. .Fl 4 , .Fl 6 , and .Fl n restrict the address resolution of FQDN in certain ways. .Fl 4 and .Fl 6 restrict results into IPv4/v6 addresses only, respectively. .Fl n avoids FQDN resolution and requires addresses to be numeric addresses. .\" .Pp .It Ar protocol .Ar protocol is one of following: .Bl -tag -width Fl -compact .It Li esp ESP based on rfc2406 .It Li esp-old ESP based on rfc1827 .It Li esp-udp ESP-UDP based on rfc3948 .It Li ah AH based on rfc2402 .It Li ah-old AH based on rfc1826 .It Li ipcomp IPComp .It Li tcp TCP-MD5 based on rfc2385 .El .\" .Pp .It Ar spi Security Parameter Index .Pq SPI for the SAD and the SPD. .Ar spi must be a decimal number, or a hexadecimal number with a .Dq Li 0x prefix. SPI values between 0 and 255 are reserved for future use by IANA and cannot be used. TCP-MD5 associations must use 0x1000 and therefore only have per-host granularity at this time. .\" .Pp .It Ar extensions take some of the following: .Bl -tag -width Fl -compact .\" .It Fl m Ar mode Specify a security protocol mode for use. .Ar mode is one of following: .Li transport , tunnel , or .Li any . The default value is .Li any . .\" .It Fl r Ar size Specify window size of bytes for replay prevention. .Ar size must be decimal number in 32-bit word. If .Ar size is zero or not specified, replay checks don't take place. .\" .It Fl u Ar id Specify the identifier of the policy entry in the SPD. See .Ar policy . .\" .It Fl f Ar pad_option defines the content of the ESP padding. .Ar pad_option is one of following: .Bl -tag -width random-pad -compact .It Li zero-pad All the paddings are zero. .It Li random-pad A series of randomized values are used. .It Li seq-pad A series of sequential increasing numbers started from 1 are used. .El .\" .It Fl f Li nocyclic-seq Don't allow cyclic sequence numbers. .\" .It Fl lh Ar time .It Fl ls Ar time Specify hard/soft life time duration of the SA measured in seconds. .\" .It Fl bh Ar bytes .It Fl bs Ar bytes Specify hard/soft life time duration of the SA measured in bytes transported. .\" .It Fl ctx Ar doi Ar algorithm Ar context-name Specify an access control label. The access control label is interpreted by the LSM (e.g., SELinux). Ultimately, it enables MAC on network communications. .Bl -tag -width Fl -compact .It Ar doi The domain of interpretation, which is used by the IKE daemon to identify the domain in which negotiation takes place. .It Ar algorithm Indicates the LSM for which the label is generated (e.g., SELinux). .It Ar context-name The string representation of the label that is interpreted by the LSM. .El .El .\" .Pp .It Ar algorithm .Bl -tag -width Fl -compact .It Fl E Ar ealgo Ar key Specify an encryption algorithm .Ar ealgo for ESP. .It Fl E Ar ealgo Ar key Fl A Ar aalgo Ar key Specify an encryption algorithm .Ar ealgo , as well as a payload authentication algorithm .Ar aalgo , for ESP. .It Fl A Ar aalgo Ar key Specify an authentication algorithm for AH. .It Fl C Ar calgo Op Fl R Specify a compression algorithm for IPComp. If .Fl R is specified, the .Ar spi field value will be used as the IPComp CPI .Pq compression parameter index on wire as-is. If .Fl R is not specified, the kernel will use well-known CPI on wire, and .Ar spi field will be used only as an index for kernel internal usage. .El .Pp .Ar key must be a double-quoted character string, or a series of hexadecimal digits preceded by .Dq Li 0x . .Pp Possible values for .Ar ealgo , .Ar aalgo , and .Ar calgo are specified in the .Sx Algorithms sections. .\" .Pp .It Ar src_range .It Ar dst_range These select the communications that should be secured by IPsec. They can be an IPv4/v6 address or an IPv4/v6 address range, and may be accompanied by a TCP/UDP port specification. This takes the following form: .Bd -literal -offset .Ar address .Ar address/prefixlen .Ar address[port] .Ar address/prefixlen[port] .Ed .Pp .Ar prefixlen and .Ar port must be decimal numbers. The square brackets around .Ar port are really necessary, they are not man page meta-characters. For FQDN resolution, the rules applicable to .Ar src and .Ar dst apply here as well. .\" .Pp .It Ar upperspec Upper-layer protocol to be used. You can use one of the words in .Pa /etc/protocols as .Ar upperspec , or .Li icmp6 , .Li ip4 , .Li gre , or .Li any . .Li any stands for .Dq any protocol . You can also use the protocol number. Additional specification can be placed after the protocol name for some protocols. You can specify a type and/or a code of ICMP or ICMPv6. The type is separated from a code by single comma and the code must always be specified. GRE key can be specified in dotted-quad format or as plain number. When a zero is specified, the kernel deals with it as a wildcard. Note that the kernel can not distinguish a wildcard from an ICPMv6 type of zero. .Pp For example, the following means that the policy doesn't require IPsec for any inbound Neighbor Solicitation. .Dl spdadd ::/0 ::/0 icmp6 135,0 -P in none ; .Pp A second example of requiring transport mode encryption of specific GRE tunnel: .Dl spdadd 0.0.0.0 0.0.0.0 gre 1234 ipsec esp/transport//require ; .Pp .Em Note : .Ar upperspec does not work against forwarding case at this moment, as it requires extra reassembly at the forwarding node .Pq not implemented at this moment . There are many protocols in .Pa /etc/protocols , but all protocols except of TCP, UDP, GRE, and ICMP may not be suitable to use with IPsec. You have to consider carefully what to use. .\" .Pp .It Ar label .Ar label is the access control label for the policy. This label is interpreted by the LSM (e.g., SELinux). Ultimately, it enables MAC on network communications. When a policy contains an access control label, SAs negotiated with this policy will contain the label. Its format: .Bl -tag -width Fl -compact .\" .It Fl ctx Ar doi Ar algorithm Ar context-name .Bl -tag -width Fl -compact .It Ar doi The domain of interpretation, which is used by the IKE daemon to identify the domain in which negotiation takes place. .It Ar algorithm Indicates the LSM for which the label is generated (e.g., SELinux). .It Ar context-name The string representation of the label that is interpreted by the LSM. .El .El .\" .Pp .It Ar policy .Ar policy is in one of the following three formats: .Bl -item -compact .It .Fl P Ar direction [priority specification] Li discard .It .Fl P Ar direction [priority specification] Li none .It .Fl P Ar direction [priority specification] Li ipsec .Ar protocol/mode/src-dst/level Op ... .El .Pp You must specify the direction of its policy as .Ar direction . Either .Ar out , .Ar in , or .Ar fwd can be used. .Pp .Ar priority specification is used to control the placement of the policy within the SPD. Policy position is determined by a signed integer where higher priorities indicate the policy is placed closer to the beginning of the list and lower priorities indicate the policy is placed closer to the end of the list. Policies with equal priorities are added at the end of groups of such policies. .Pp Priority can only be specified when setkey has been compiled against kernel headers that support policy priorities (Linux \*[Gt]= 2.6.6). If the kernel does not support priorities, a warning message will be printed the first time a priority specification is used. Policy priority takes one of the following formats: .Bl -tag -width "discard" .It Ar {priority,prio} offset .Ar offset is an integer in the range from \-2147483647 to 214783648. .It Ar {priority,prio} base {+,\-} offset .Ar base is either .Li low (\-1073741824) , .Li def (0) , or .Li high (1073741824) .Pp .Ar offset is an unsigned integer. It can be up to 1073741824 for positive offsets, and up to 1073741823 for negative offsets. .El .Pp .Li discard means the packet matching indexes will be discarded. .Li none means that IPsec operation will not take place onto the packet. .Li ipsec means that IPsec operation will take place onto the packet. .Pp The .Ar protocol/mode/src-dst/level part specifies the rule how to process the packet. Either .Li ah , .Li esp , or .Li ipcomp must be used as .Ar protocol . .Ar mode is either .Li transport or .Li tunnel . If .Ar mode is .Li tunnel , you must specify the end-point addresses of the SA as .Ar src and .Ar dst with .Sq - between these addresses, which is used to specify the SA to use. If .Ar mode is .Li transport , both .Ar src and .Ar dst can be omitted. .Ar level is to be one of the following: .Li default , use , require , or .Li unique . If the SA is not available in every level, the kernel will ask the key exchange daemon to establish a suitable SA. .Li default means the kernel consults the system wide default for the protocol you specified, e.g. the .Li esp_trans_deflev sysctl variable, when the kernel processes the packet. .Li use means that the kernel uses an SA if it's available, otherwise the kernel keeps normal operation. .Li require means SA is required whenever the kernel sends a packet matched with the policy. .Li unique is the same as .Li require ; in addition, it allows the policy to match the unique out-bound SA. You just specify the policy level .Li unique , .Xr racoon 8 will configure the SA for the policy. If you configure the SA by manual keying for that policy, you can put a decimal number as the policy identifier after .Li unique separated by a colon .Sq \&: like: .Li unique:number in order to bind this policy to the SA. .Li number must be between 1 and 32767. It corresponds to .Ar extensions Fl u of the manual SA configuration. When you want to use SA bundle, you can define multiple rules. For example, if an IP header was followed by an AH header followed by an ESP header followed by an upper layer protocol header, the rule would be: .Dl esp/transport//require ah/transport//require ; The rule order is very important. .Pp When NAT-T is enabled in the kernel, policy matching for ESP over UDP packets may be done on endpoint addresses and port (this depends on the system. System that do not perform the port check cannot support multiple endpoints behind the same NAT). When using ESP over UDP, you can specify port numbers in the endpoint addresses to get the correct matching. Here is an example: .Bd -literal -offset spdadd 10.0.11.0/24[any] 10.0.11.33/32[any] any \-P out ipsec esp/tunnel/192.168.0.1[4500]-192.168.1.2[30000]/require ; .Ed These ports must be left unspecified (which defaults to 0) for anything other than ESP over UDP. They can be displayed in SPD dump using .Nm .Fl DPp . .Pp Note that .Dq Li discard and .Dq Li none are not in the syntax described in .Xr ipsec_set_policy 3 . There are a few differences in the syntax. See .Xr ipsec_set_policy 3 for detail. .El .\" .Ss Algorithms The following list shows the supported algorithms. .Sy protocol and .Sy algorithm are almost orthogonal. These authentication algorithms can be used as .Ar aalgo in .Fl A Ar aalgo of the .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm keylen (bits) hmac-md5 128 ah: rfc2403 128 ah-old: rfc2085 hmac-sha1 160 ah: rfc2404 160 ah-old: 128bit ICV (no document) keyed-md5 128 ah: 96bit ICV (no document) 128 ah-old: rfc1828 keyed-sha1 160 ah: 96bit ICV (no document) 160 ah-old: 128bit ICV (no document) null 0 to 2048 for debugging hmac-sha256 256 ah: 96bit ICV (draft-ietf-ipsec-ciph-sha-256-00) 256 ah-old: 128bit ICV (no document) hmac-sha384 384 ah: 96bit ICV (no document) 384 ah-old: 128bit ICV (no document) hmac-sha512 512 ah: 96bit ICV (no document) 512 ah-old: 128bit ICV (no document) hmac-ripemd160 160 ah: 96bit ICV (RFC2857) ah-old: 128bit ICV (no document) aes-xcbc-mac 128 ah: 96bit ICV (RFC3566) 128 ah-old: 128bit ICV (no document) tcp-md5 8 to 640 tcp: rfc2385 (tcp-md5 support only on BSD) .Ed .Pp These encryption algorithms can be used as .Ar ealgo in .Fl E Ar ealgo of the .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm keylen (bits) des-cbc 64 esp-old: rfc1829, esp: rfc2405 3des-cbc 192 rfc2451 null 0 to 2048 rfc2410 blowfish-cbc 40 to 448 rfc2451 cast128-cbc 40 to 128 rfc2451 des-deriv 64 ipsec-ciph-des-derived-01 3des-deriv 192 no document rijndael-cbc 128/192/256 rfc3602 twofish-cbc 0 to 256 draft-ietf-ipsec-ciph-aes-cbc-01 aes-ctr 160/224/288 draft-ietf-ipsec-ciph-aes-ctr-03 camellia-cbc 128/192/256 rfc4312 .Ed .Pp Note that the first 128 bits of a key for .Li aes-ctr will be used as AES key, and the remaining 32 bits will be used as nonce. .Pp These compression algorithms can be used as .Ar calgo in .Fl C Ar calgo of the .Ar protocol parameter: .Pp .Bd -literal -offset indent algorithm deflate rfc2394 .Ed .\" .Ss RFC vs Linux kernel semantics The Linux kernel uses the .Ar fwd policy instead of the .Ar in policy for packets what are forwarded through that particular box. .Pp In .Ar kernel mode, .Nm manages and shows policies and SAs exactly as they are stored in the kernel. .Pp In .Ar RFC mode, .Nm .Bl -item .It creates .Ar fwd policies for every .Ar in policy inserted .It (not implemented yet) filters out all .Ar fwd policies .El .Sh RETURN VALUES The command exits with 0 on success, and non-zero on errors. .\" .Sh EXAMPLES .Bd -literal -offset add 3ffe:501:4819::1 3ffe:501:481d::1 esp 123457 \-E des-cbc 0x3ffe05014819ffff ; add \-6 myhost.example.com yourhost.example.com ah 123456 \-A hmac-sha1 "AH SA configuration!" ; add 10.0.11.41 10.0.11.33 esp 0x10001 \-E des-cbc 0x3ffe05014819ffff \-A hmac-md5 "authentication!!" ; get 3ffe:501:4819::1 3ffe:501:481d::1 ah 123456 ; flush ; dump esp ; spdadd 10.0.11.41/32[21] 10.0.11.33/32[any] any \-P out ipsec esp/tunnel/192.168.0.1-192.168.1.2/require ; add 10.1.10.34 10.1.10.36 tcp 0x1000 \-A tcp-md5 "TCP-MD5 BGP secret" ; add 10.0.11.41 10.0.11.33 esp 0x10001 \-ctx 1 1 "system_u:system_r:unconfined_t:SystemLow-SystemHigh" \-E des-cbc 0x3ffe05014819ffff; spdadd 10.0.11.41 10.0.11.33 any \-ctx 1 1 "system_u:system_r:unconfined_t:SystemLow-SystemHigh" \-P out ipsec esp/transport//require ; .Ed .\" .Sh SEE ALSO .Xr ipsec_set_policy 3 , .Xr racoon 8 , .Xr sysctl 8 .Rs .%T "Changed manual key configuration for IPsec" .%U "http://www.kame.net/newsletter/19991007/" .%D "October 1999" .Re .\" .Sh HISTORY The .Nm command first appeared in the WIDE Hydrangea IPv6 protocol stack kit. The command was completely re-designed in June 1998. .\" .Sh BUGS .Nm should report and handle syntax errors better. .Pp For IPsec gateway configuration, .Ar src_range and .Ar dst_range with TCP/UDP port numbers does not work, as the gateway does not reassemble packets .Pq it cannot inspect upper-layer headers .