NAME¶
inputlircd
—
zeroconf LIRC daemon using input event devices
SYNOPSIS¶
inputlircd |
[ -d
socket ]
[-f ]
[-c ]
[-r
repeat-rate ]
[-m
keycode ]
[-n
device name ]
[-u
username ]
device
[device
... ] |
DESCRIPTION¶
inputlircd
is a small LIRC daemon that reads
from
/dev/input/eventX devices and sends
the received keycodes to connecting LIRC clients.
inputlircd
needs no configuration, it uses
the standardised names for the keycodes as used by the kernel. Many USB remote
controls that present HID devices, as well as multimedia keyboards should work
out of the box.
inputlircd
expects a list of input event
devices as commandline parameters. It will only read events from those
devices.
OPTIONS¶
-d
socket
- Location of the UNIX socket to which LIRC clients can connect. The default
is /var/run/lirc/lircd.
-f
- Run in the foreground.
-c
- Capture modifier keys. This causes the CTRL, SHIFT, ALT and META keys to
be treated as modifer keys that, when used in combination with another
keys, change the LIRC event from that key rather than being sent as their
own LIRC events.
-r
repeat-rate
- Set the repeat rate (in milliseconds) of the remote control. The default
is 0. Repeated keys that arrive less than
repeat-rate milliseconds apart will be
flagged as as repeat LIRC events.
-g
- Grab the input device(s). This gives
inputlircd
exclusive access to the
input devices and stops events from propagating any further.
-m
keycode
- Minimum keycode to send to LIRC clients. Keycodes lower than this number
are filtered out. The default is 88, this filters out the alphanumeric
section and the keypad section of normal keyboards, but allows all
extended keys. The rationale is that clients should not be able to grab
normal keypresses, this could be a security risk.
-n
device name
- Name of an input device to read events from. This scans all available
input event devices, and if the symbolic name of an event device matches
device name, adds it to the list of
devices to read from. The device name can
contain wildcard patterns, see glob(7). To
get a list of available devices and their names, cat
/proc/bus/input/devices or use
lsinput(8).
-u
username
- Set user and group id to that of username
after opening the devices and UNIX socket as root. The default is
nobody.
-t
path
- Provides the path to a file containing a mapping between input event key
names and the commands which should be reported via lirc. The files should
contain lines of the form KEY_FOO =
bar. This is useful for backward compatibility. The default is not
to use a translation table.
- device
- One or more input event devices. If you want to use
inputlircd
to process multimedia keys
on the keyboard, then /dev/input/event0
is the most likely choice. If you have other input devices, such as USB
remote controllers that act like a HID device, then you probably need one
of the other event devices present. See
/proc/bus/input/devices for a list of
available input devices. If unsure, you can add all available input event
devices.
FILES¶
- /var/run/lirc/lircd
- Default location of the UNIX socket to which LIRC clients can
connect.
- /dev/input/eventX
- The kernel input layer's event device files.
- /proc/bus/input/devices
- List of all input devices.
SEE ALSO¶
irw(1),
input-events(8),
setkeycodes(8),
/usr/include/linux/input.h.