table of contents
| GMERLIN-RECORD(1) | User Manuals | GMERLIN-RECORD(1) |
NAME¶
gmerlin-record - commandline audio/video recorderSYNOPSIS¶
gmerlin-record [options]DESCRIPTION¶
Commandline recorderOPTIONS¶
-aud <audio_options>Set audio recording options
do_audio=[1|0] (default: 1)
Record audio
plugin=option[{suboptions}]
Supported options: i_alsa i_oss i_esd i_pulse i_audiofile
Default: i_alsa
Plugin
Suboptions for plugin=i_alsa
-vid <video_options>
card=<string>
Supported strings: default hw:0,0 hw:0,1 hw:0,2 hw:0,3
Default: default
Card
channel_mode=<string>
Supported strings: mono stereo
Default: stereo
Channel Mode
bits=<string>
Supported strings: 8 16
Default: 16
Bits
samplerate=<number> (8000..96000, default: 44100)
Samplerate [Hz]
buffer_time=<number> (10..10000, default: 1000)
Buffer time
Set the buffer time (in milliseconds). Larger values improve recording
performance on slow systems under load.
user_device=<string>
User device
Enter a custom device to use for recording. Leave empty to use the settings
above
Suboptions for plugin=i_oss
device=<string> (Default: /dev/dsp)
Device
channel_mode=<string>
Supported strings: Mono Stereo
Default: Stereo
Channel Mode
bits=<string>
Supported strings: 8 16
Default: 16
Bits
samplerate=<number> (8000..96000, default: 44100)
Samplerate [Hz]
Suboptions for plugin=i_esd
esd_host=<string>
Host (empty: local)
input_mode=<string>
Supported strings: record monitor
Default: record
Input Mode
Suboptions for plugin=i_pulse
channel_mode=<string>
Supported strings: mono stereo
Default: stereo
Channel Mode
bits=<string>
Supported strings: 8 16
Default: 16
Bits
samplerate=<number> (8000..96000, default: 44100)
Samplerate [Hz]
server=<string>
Server
Server to connect to. Leave empty for default.
dev=<string>
Source
Source to open. Use the PulseAudio manager for available Sources.
Suboptions for plugin=i_audiofile
channel_mode=<string>
Supported strings: mono stereo
Default: stereo
Channel Mode
samplerate=<number> (8000..96000, default: 44100)
Samplerate [Hz]
album=<string>
Album
shuffle=[1|0] (default: 0)
Shuffle
language=<string>
Supported strings: aar abk ace ach ada afa afh afr aka akk ale alg amh ang apa
ara arc arn arp art arw asm ath aus ava ave awa aym aze bad bai bak bal bam
ban bas bat bej bel bem ben ber bho bih bik bin bis bla bnt tib bos bra bre
btk bua bug bul cad cai car cat cau ceb cel cze cha chb che chg chk chm chn
cho chp chr chu chv chy cmc cop cor cos cpe cpf cpp cre crp cus wel dak dan
day del den ger dgr din div doi dra dua dum dyu dzo efi egy eka gre elx eng
enm epo est baq ewe ewo fan fao per fat fij fin fiu fon fre frm fro fry ful
fur gaa gay gba gem gez gil gla gle glg glv gmh goh gon gor got grb grc grn
guj gwi hai hau haw heb her hil him hin hit hmn hmo scr hun hup arm iba ibo
ijo iku ile ilo ina inc ind ine ipk ira iro ice ita jav jpn jpr kaa kab kac
kal kam kan kar kas geo kau kaw kaz kha khi khm kho kik kin kir kmb kok kom
kon kor kos kpe kro kru kum kur kut lad lah lam lao lat lav lez lin lit lol
loz ltz lua lub lug lui lun luo lus mad mag mah mai mak mal man map mar mas
mdr men mga mic min mis mac mkh mlg mlt mnc mni mno moh mol mon mos mao may
mul mun mus mwr bur myn nah nai nau nav nbl nde ndo nds nep new nia nic niu
dut nno nob non nor nso nub nya nym nyn nyo nzi oci oji ori orm osa oss ota
oto paa pag pal pam pan pap pau peo phi pli pol pon por pra pro pus que raj
rap rar roa rom rum run rus sad sag sah sai sal sam san sas sat sco sel sem
sga sgn shn sid sin sio sit sla slo slv sme smi smo sna snd snk sog som son
sot spa alb srd scc srr ssa ssw suk sun sus sux swa swe syr tah tai tam tat
tel tem ter tet tgk tgl tha tig tir tiv tkl tli tmh tog ton tpi tsi tsn tso
tuk tum tur tut tvl twi tyv uga uig ukr umb und urd uzb vai ven vie vol vot
wak wal war was wen wol xho yao yap yid yor ypk zap zen zha chi znd zul zun
Default: eng
LanguageSet video recording options
do_video=[1|0] (default: 1)
Record video
plugin=option[{suboptions}]
Supported options: i_v4l i_v4l2 i_x11
Default: i_v4l
Plugin
Suboptions for plugin=i_v4l
-af <audio filter options>
device=<string> (Default: /dev/video0)
V4L Device
resolution=<string>
Supported strings: QSIF (160x112) QCIF (176x144) QVGA (320x240) SIF(352x240) CIF
(352x288) VGA (640x480) User defined
Default: QVGA (320x240)
Resolution
user_width=<number> (160..1024, default: 720)
User defined width
user_height=<number> (112..768, default: 576)
User defined height
brightness=<number> (0..65535, default: 40000)
Brightness
hue=<number> (0..65535, default: 65535)
Hue
colour=<number> (0..65535, default: 30000)
Colour
contrast=<number> (0..65535, default: 30000)
Contrast
whiteness=<number> (0..65535, default: 30000)
Whiteness
Suboptions for plugin=i_v4l2
device=option[{suboptions}]
Supported options: /dev/video0
Default: /dev/video0
V4L2 Device
force_rw=[1|0] (default: 1)
Force read
Don't use memory mapping
resolution=<string>
Supported strings: QSIF (160x112) QCIF (176x144) QVGA (320x240) SIF(352x240) CIF
(352x288) VGA (640x480) User defined
Default: QVGA (320x240)
Resolution
user_width=<number> (160..1024, default: 720)
User defined width
user_height=<number> (112..768, default: 576)
User defined height
Suboptions for plugin=i_x11
root=[1|0] (default: 0)
Grab from root window
draw_cursor=[1|0] (default: 1)
Draw cursor
win_ontop=[1|0] (default: 1)
Keep grab window on top
win_sticky=[1|0] (default: 1)
Make grab window sticky
disable_screensaver=[1|0] (default: 1)
Disable screensaver
Disable screensaver and energy saving mode
do_limit_fps=[1|0] (default: 1)
Limit fps
Limit frames per second. By default, the maximum possible framerate will be
used.
limit_fps=<number> (1.00..100.00, default: 25.00)
fps limit
Specify the maximum framerate for input plugins, which can capture images really
fast
Set audio filter options
audio_filters={option[{suboptions}][:option[{suboptions}]...]}
Supported options: fa_ladspa_lp4pole_fcrcia_oa fa_ladspa_fourByFourPole
fa_ladspa_adsr fa_ladspa_amPitchshift fa_ladspa_alias fa_ladspa_allpass_c
fa_ladspa_allpass_l fa_ladspa_allpass_n fa_ladspa_amp_gcia_oa
fa_ladspa_amp_mono fa_ladspa_amp_stereo fa_ladspa_artificialLatency
fa_ladspa_divider fa_ladspa_autoPhaser fa_ladspa_sawtooth_fa_oa
fa_ladspa_square_fa_oa fa_ladspa_triangle_fasc_oa fa_ladspa_triangle_fcsa_oa
fa_ladspa_pulse_fapc_oa fa_ladspa_pulse_fcpa_oa fa_ladspa_satanMaximiser
fa_ladspa_canyon_delay fa_ladspa_chebstortion fa_ladspa_syncsquare_fcga_oa
fa_ladspa_syncpulse_fcpcga_oa fa_ladspa_comb fa_ladspa_comb_c fa_ladspa_comb_l
fa_ladspa_comb_n fa_ladspa_const fa_ladspa_crossoverDist fa_ladspa_dcRemove
fa_ladspa_dj_eq fa_ladspa_dj_eq_mono fa_ladspa_djFlanger fa_ladspa_decimator
fa_ladspa_declip fa_ladspa_delayorama fa_ladspa_diode fa_ladspa_disintegrator
fa_ladspa_dysonCompress fa_ladspa_delay_0,01s fa_ladspa_delay_0,1s
fa_ladspa_delay_1s fa_ladspa_delay_5s fa_ladspa_delay_60s fa_ladspa_decay
fa_ladspa_fmOsc fa_ladspa_fastLookaheadLimiter fa_ladspa_foverdrive
fa_ladspa_fbdelay_0,01s fa_ladspa_fbdelay_0,1s fa_ladspa_fbdelay_1s
fa_ladspa_fbdelay_5s fa_ladspa_fbdelay_60s fa_ladspa_flanger
fa_ladspa_foldover fa_sampleformat fa_ladspa_fadDelay fa_ladspa_freeverb3
fa_ladspa_freqTracker fa_ladspa_fmod_famc_oa fa_ladspa_fmod_fcma_oa
fa_ladspa_butthigh_iir fa_ladspa_buttlow_iir fa_ladspa_gsm fa_ladspa_gate
fa_ladspa_giantFlange fa_ladspa_bandpass_a_iir fa_ladspa_bandpass_iir
fa_ladspa_highpass_iir fa_ladspa_lowpass_iir fa_ladspa_gongBeater
fa_ladspa_gong fa_ladspa_grain_scatter fa_ladspa_hard_gate
fa_ladspa_hardLimiter fa_ladspa_harmonicGen fa_ladspa_hermesFilter
fa_ladspa_hpf fa_ladspa_pitchScaleHQ fa_ladspa_identity_audio fa_ladspa_imp
fa_ladspa_inv fa_ladspa_karaoke fa_ladspa_lcrDelay fa_ladspa_lfoPhaser
fa_ladspa_lsFilter fa_ladspa_lofi fa_ladspa_lpf fa_ladspa_notch_iir
fa_ladspa_matrixSpatialiser fa_ladspa_matrixMSSt fa_ladspa_matrixStMS
fa_ladspa_mbeq fa_ladspa_multivoiceChorus fa_ladspa_pitchScale
fa_ladspa_pointerCastDistortion fa_ladspa_random_fasc_oa
fa_ladspa_random_fcsa_oa fa_ladspa_rateShifter fa_ladspa_retroFlange
fa_ladspa_revdelay fa_ladspa_ringmod_1i1o1l fa_ladspa_sc1 fa_ladspa_sc4
fa_ladspa_sc4m fa_ladspa_se4 fa_ladspa_difference_iamc_oa
fa_ladspa_difference_icma_oa fa_ladspa_product_iaic_oa fa_ladspa_ratio_nadc_oa
fa_ladspa_ratio_ncda_oa fa_ladspa_sum_iaic_oa fa_ladspa_sifter
fa_ladspa_compress_peak fa_ladspa_compress_rms fa_ladspa_expand_peak
fa_ladspa_expand_rms fa_ladspa_limit_peak fa_ladspa_limit_rms fa_ladspa_amp
fa_ladspa_delay_c fa_ladspa_delay_l fa_ladspa_delay_n fa_ladspa_sine_faac
fa_ladspa_sine_fcaa fa_ladspa_singlePara fa_ladspa_sinusWavewrapper
fa_ladspa_smoothDecimate fa_ladspa_svf fa_ladspa_tap_autopan
fa_ladspa_tap_chorusflanger fa_ladspa_tap_deesser fa_ladspa_tap_dynamics_m
fa_ladspa_tap_dynamics_st fa_ladspa_tap_equalizer fa_ladspa_tap_equalizer_bw
fa_ladspa_tap_doubler fa_ladspa_tap_pinknoise fa_ladspa_tap_pitch
fa_ladspa_tap_reflector fa_ladspa_tap_reverb fa_ladspa_tap_rotspeak
fa_ladspa_tap_limiter fa_ladspa_tap_sigmoid fa_ladspa_tap_stereo_echo
fa_ladspa_tap_tremolo fa_ladspa_tap_tubewarmth fa_ladspa_tap_vibrato
fa_ladspa_tapeDelay fa_ladspa_transient fa_ladspa_triplePara fa_ladspa_vcf303
fa_ladspa_valveRect fa_ladspa_valve fa_volume fa_ladspa_vynil
fa_ladspa_wshape_sine fa_ladspa_shaper fa_ladspa_zm1
Audio Filters
Suboptions for fa_ladspa_lp4pole_fcrcia_oa
-vf <video filter options>
CutoffFrequency=<number> (0.000..0.500,
default: 0.500)
Cutoff Frequency
Resonanz=<number> (0.000..4.000, default: 0.000)
Resonanz
Suboptions for fa_ladspa_fourByFourPole
Frequency1=<number> (1.000..20000.000,
default: 5000.750)
Frequency 1
Feedback1=<number> (-1.000..1.000, default: 5000.750)
Feedback 1
Frequency2=<number> (1.000..20000.000, default: 10000.500)
Frequency 2
Feedback2=<number> (-1.000..1.000, default: 10000.500)
Feedback 2
Frequency3=<number> (1.000..20000.000, default: 15000.250)
Frequency 3
Feedback3=<number> (-1.000..1.000, default: 15000.250)
Feedback 3
Frequency4=<number> (1.000..20000.000, default: 20000.000)
Frequency 4
Feedback4=<number> (-1.000..1.000, default: 20000.000)
Feedback 4
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_adsr
TriggerThreshold=<number> (default:
0.000)
Trigger Threshold
Einschwingzeit(s)=<number> (default: 0.000)
Einschwingzeit (s)
Abklingzeit(s)=<number> (default: 0.000)
Abklingzeit (s)
Haltewert=<number> (0.000..1.000, default: 1.000)
Haltewert
Ausklingzeit(s)=<number> (default: 0.000)
Ausklingzeit (s)
Suboptions for fa_ladspa_amPitchshift
Pitchshift=<number> (0.250..4.000,
default: 0.000)
Pitch shift
Buffersize=<number> (1..7, default: 4)
Buffer size
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_alias
Aliasinglevel=<number> (0.000..1.000,
default: 0.000)
Aliasing level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_allpass_c
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_allpass_l
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_allpass_n
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_amp_gcia_oa
Verstärkung(dB)=<number>
(-96.000..96.000, default: 0.000)
Verstärkung (dB)
Suboptions for fa_ladspa_amp_mono
Gain=<number> (default: 0.000)
Gain
Suboptions for fa_ladspa_amp_stereo
Gain=<number> (default: 0.000)
Gain
Suboptions for fa_ladspa_artificialLatency
Delay(ms)=<number> (0.000..10000.000,
default: 2500.000)
Delay (ms)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_divider
Denominator=<number> (1..8, default: 0)
Denominator
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_autoPhaser
Attacktime(s)=<number> (0.000..1.000,
default: 0.250)
Attack time (s)
Decaytime(s)=<number> (0.000..1.000, default: 0.250)
Decay time (s)
Modulationdepth=<number> (0.000..1.000, default: 0.250)
Modulation depth
Feedback=<number> (-1.000..1.000, default: 0.250)
Feedback
Spread(octaves)=<number> (0.000..2.000, default: 0.250)
Spread (octaves)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_triangle_fasc_oa
Slope=<number> (0.000..1.000, default:
0.500)
Slope
Suboptions for fa_ladspa_triangle_fcsa_oa
Frequenz=<number> (0.000..0.500, default:
440.000)
Frequenz
Suboptions for fa_ladspa_pulse_fapc_oa
PulseWidth=<number> (0.000..1.000,
default: 0.500)
Pulse Width
Suboptions for fa_ladspa_pulse_fcpa_oa
Frequenz=<number> (0.000..0.500, default:
440.000)
Frequenz
Suboptions for fa_ladspa_satanMaximiser
Decaytime(samples)=<number>
(2.000..30.000, default: 30.000)
Decay time (samples)
Kneepoint(dB)=<number> (-90.000..0.000, default: 30.000)
Knee point (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_canyon_delay
LefttoRightTime(Seconds)=<number>
(0.010..0.990, default: 0.000)
Left to Right Time (Seconds)
LefttoRightFeedback(Percent)=<number> (-1.000..1.000,
default: 0.000)
Left to Right Feedback (Percent)
RighttoLeftTime(Seconds)=<number> (0.010..0.990,
default: 0.000)
Right to Left Time (Seconds)
RighttoLeftFeedback(Percent)=<number> (-1.000..1.000,
default: 0.000)
Right to Left Feedback (Percent)
Low-PassCutoff(Hz)=<number> (1.000..5000.000, default:
0.000)
Low-Pass Cutoff (Hz)
Suboptions for fa_ladspa_chebstortion
Distortion=<number> (0.000..3.000, default:
0.000)
Distortion
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_syncsquare_fcga_oa
Frequency=<number> (0.000..64.000, default:
16.000)
Frequency
Suboptions for fa_ladspa_syncpulse_fcpcga_oa
Frequenz=<number> (0.000..64.000, default:
16.000)
Frequenz
PulseWidth=<number> (0.000..1.000, default: 0.500)
Pulse Width
Suboptions for fa_ladspa_comb
Bandseparation(Hz)=<number>
(16.000..640.000, default: 172.000)
Band separation (Hz)
Feedback=<number> (-0.990..0.990, default: 172.000)
Feedback
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_comb_c
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_comb_l
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_comb_n
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
DecayTime(s)=<number> (default: 0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_const
Signalamplitude=<number> (-1.000..1.100,
default: 0.000)
Signal amplitude
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_crossoverDist
Crossoveramplitude=<number>
(0.000..0.100, default: 0.000)
Crossover amplitude
Smoothing=<number> (0.000..1.000, default: 1.000)
Smoothing
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_dcRemove
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_dj_eq
Logain(dB)=<number> (-70.000..6.000,
default: 0.000)
Lo gain (dB)
Midgain(dB)=<number> (-70.000..6.000, default: 0.000)
Mid gain (dB)
Higain(dB)=<number> (-70.000..6.000, default: 0.000)
Hi gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_dj_eq_mono
Logain(dB)=<number> (-70.000..6.000,
default: 0.000)
Lo gain (dB)
Midgain(dB)=<number> (-70.000..6.000, default: 0.000)
Mid gain (dB)
Higain(dB)=<number> (-70.000..6.000, default: 0.000)
Hi gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_djFlanger
LFOsync=<number> (default: 0.000)
LFO sync
LFOperiod(s)=<number> (0.100..32.000, default: 0.000)
LFO period (s)
LFOdepth(ms)=<number> (1.000..5.000, default: 4.000)
LFO depth (ms)
Feedback(%)=<number> (-100.000..100.000, default: 4.000)
Feedback (%)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_decimator
Bitdepth=<number> (1.000..24.000,
default: 24.000)
Bit depth
Samplerate(Hz)=<number> (0.001..1.000, default: 1.000)
Sample rate (Hz)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_declip
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_delayorama
Randomseed=<number> (0..1000, default:
0)
Random seed
Inputgain(dB)=<number> (-96.000..24.000, default: 0.000)
Input gain (dB)
Feedback(%)=<number> (0.000..100.000, default: 0.000)
Feedback (%)
Numberoftaps=<number> (2..128, default: 2)
Number of taps
Firstdelay(s)=<number> (0.000..5.000, default: 2.000)
First delay (s)
Delayrange(s)=<number> (0.000..6.000, default: 6.000)
Delay range (s)
Delaychange=<number> (0.200..5.000, default: 6.000)
Delay change
Delayrandom(%)=<number> (0.000..100.000, default: 6.000)
Delay random (%)
Amplitudechange=<number> (0.200..5.000, default: 6.000)
Amplitude change
Amplituderandom(%)=<number> (0.000..100.000, default: 6.000)
Amplitude random (%)
Dry/wetmix=<number> (0.000..1.000, default: 6.000)
Dry/wet mix
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_diode
Mode(0fornone,1forhalfwave,2forfullwave)=<number>
(0.000..3.000, default: 0.000)
Mode (0 for none, 1 for half wave, 2 for full wave)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_disintegrator
Probability=<number> (0.000..1.000, default:
0.000)
Probability
Multiplier=<number> (-1.000..1.000, default: 0.000)
Multiplier
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_dysonCompress
Peaklimit(dB)=<number>
(-30.000..0.000, default: 0.000)
Peak limit (dB)
Releasetime(s)=<number> (0.000..1.000, default: 0.250)
Release time (s)
Fastcompressionratio=<number> (0.000..1.000, default: 0.500)
Fast compression ratio
Compressionratio=<number> (0.000..1.000, default: 0.500)
Compression ratio
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_delay_0,01s
Delay(Seconds)=<number> (0.000..0.010,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Suboptions for fa_ladspa_delay_0,1s
Delay(Seconds)=<number> (0.000..0.100,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Suboptions for fa_ladspa_delay_1s
Delay(Seconds)=<number> (0.000..1.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Suboptions for fa_ladspa_delay_5s
Delay(Seconds)=<number> (0.000..5.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Suboptions for fa_ladspa_delay_60s
Delay(Seconds)=<number> (0.000..60.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Suboptions for fa_ladspa_decay
DecayTime(s)=<number> (default:
0.000)
Decay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_fmOsc
Waveform(1=sin,2=tri,3=squ,4=saw)=<number>
(1..4, default: 0)
Waveform (1=sin, 2=tri, 3=squ, 4=saw)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_fastLookaheadLimiter
Inputgain(dB)=<number>
(-20.000..20.000, default: 0.000)
Input gain (dB)
Limit(dB)=<number> (-20.000..0.000, default: 0.000)
Limit (dB)
Releasetime(s)=<number> (0.010..2.000, default: 0.507)
Release time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_foverdrive
Drivelevel=<number> (1.000..3.000,
default: 1.000)
Drive level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_fbdelay_0,01s
Delay(Seconds)=<number> (0.000..0.010,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Feedback=<number> (-1.000..1.000, default: 0.500)
Feedback
Suboptions for fa_ladspa_fbdelay_0,1s
Delay(Seconds)=<number> (0.000..0.100,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Feedback=<number> (-1.000..1.000, default: 0.500)
Feedback
Suboptions for fa_ladspa_fbdelay_1s
Delay(Seconds)=<number> (0.000..1.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Feedback=<number> (-1.000..1.000, default: 0.500)
Feedback
Suboptions for fa_ladspa_fbdelay_5s
Delay(Seconds)=<number> (0.000..5.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Feedback=<number> (-1.000..1.000, default: 0.500)
Feedback
Suboptions for fa_ladspa_fbdelay_60s
Delay(Seconds)=<number> (0.000..60.000,
default: 0.000)
Delay (Seconds)
Dry/WetBalance=<number> (0.000..1.000, default: 0.500)
Dry/Wet Balance
Feedback=<number> (-1.000..1.000, default: 0.500)
Feedback
Suboptions for fa_ladspa_flanger
Delaybase(ms)=<number>
(0.100..25.000, default: 6.325)
Delay base (ms)
Maxslowdown(ms)=<number> (0.000..10.000, default: 2.500)
Max slowdown (ms)
LFOfrequency(Hz)=<number> (0.050..100.000, default: 0.334)
LFO frequency (Hz)
Feedback=<number> (-1.000..1.000, default: 0.334)
Feedback
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_foldover
Drive=<number> (0.000..1.000, default:
0.000)
Drive
Skew=<number> (0.000..1.000, default: 0.000)
Skew
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_sampleformat
sampleformat=<string>
Supported strings: Unsigned 8 bit Signed 8 bit Unsigned 16 bit Signed 16 bit
Signed 32 bit Floating point Double precision
Default: YUV 420 Planar
Sampleformat
Suboptions for fa_ladspa_fadDelay
Delay(seconds)=<number> (0.100..10.000,
default: 0.000)
Delay (seconds)
Feedback(dB)=<number> (-70.000..0.000, default: 0.000)
Feedback (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_freeverb3
FreezeMode=[1|0] (default: 0)
Freeze Mode
RoomSize=<number> (0.000..1.000, default: 0.500)
Room Size
Damping=<number> (0.000..1.000, default: 0.000)
Damping
WetLevel=<number> (0.000..1.000, default: 0.000)
Wet Level
DryLevel=<number> (0.000..1.000, default: 1.000)
Dry Level
Width=<number> (0.000..1.000, default: 0.500)
Width
Suboptions for fa_ladspa_freqTracker
Trackingspeed=<number> (0.000..1.000,
default: 0.500)
Tracking speed
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_fmod_famc_oa
Modulation(Octaves)=<number> (default:
0.000)
Modulation (Octaves)
Suboptions for fa_ladspa_fmod_fcma_oa
Frequenz(Hz)=<number> (0.000..0.500,
default: 440.000)
Frequenz (Hz)
Suboptions for fa_ladspa_butthigh_iir
CutoffFrequency(Hz)=<number>
(0.000..0.450, default: 0.001)
Cutoff Frequency (Hz)
Resonance=<number> (0.100..1.410, default: 0.755)
Resonance
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_buttlow_iir
CutoffFrequency(Hz)=<number>
(0.000..0.450, default: 0.001)
Cutoff Frequency (Hz)
Resonance=<number> (0.100..1.410, default: 0.755)
Resonance
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_gsm
Dry/wetmix=<number> (0.000..1.000,
default: 0.000)
Dry/wet mix
Numberofpasses=<number> (0..10, default: 0)
Number of passes
Errorrate(bits/block)=<number> (0.000..30.000, default:
0.000)
Error rate (bits/block)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_gate
LFkeyfilter(Hz)=<number>
(0.001..0.100, default: 0.001)
LF key filter (Hz)
HFkeyfilter(Hz)=<number> (0.005..0.490, default:
0.490)
HF key filter (Hz)
Threshold(dB)=<number> (-70.000..20.000, default: -70.000)
Threshold (dB)
Attack(ms)=<number> (0.010..1000.000, default: 250.008)
Attack (ms)
Hold(ms)=<number> (2.000..2000.000, default: 1500.500)
Hold (ms)
Decay(ms)=<number> (2.000..4000.000, default: 2001.000)
Decay (ms)
Range(dB)=<number> (-90.000..0.000, default: -90.000)
Range (dB)
Outputselect(-1=keylisten,0=gate,1=bypass)=<number>
(-1..1, default: -90)
Output select (-1 = key listen, 0 = gate, 1 = bypass)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_giantFlange
Doubledelay=<number> (default: 0.000)
Double delay
LFOfrequency1(Hz)=<number> (0.000..30.000, default:
0.000)
LFO frequency 1 (Hz)
Delay1range(s)=<number> (0.000..10.500, default:
2.625)
Delay 1 range (s)
LFOfrequency2(Hz)=<number> (0.000..30.000, default:
2.625)
LFO frequency 2 (Hz)
Delay2range(s)=<number> (0.000..10.500, default:
2.625)
Delay 2 range (s)
Feedback=<number> (-100.000..100.000, default: 2.625)
Feedback
Dry/Wetlevel=<number> (0.000..1.000, default: 2.625)
Dry/Wet level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_bandpass_a_iir
CenterFrequency(Hz)=<number>
(0.000..0.450, default: 0.001)
Center Frequency (Hz)
Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)
Bandwidth (Hz)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_bandpass_iir
CenterFrequency(Hz)=<number>
(0.000..0.450, default: 0.007)
Center Frequency (Hz)
Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)
Bandwidth (Hz)
Stages(2polesperstage)=<number> (1..10, default: 0)
Stages(2 poles per stage)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_highpass_iir
CutoffFrequency=<number> (0.000..0.450,
default: 0.001)
Cutoff Frequency
Stages(2polesperstage)=<number> (1..10, default: 0)
Stages(2 poles per stage)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_lowpass_iir
CutoffFrequency=<number> (0.000..0.450,
default: 0.055)
Cutoff Frequency
Stages(2polesperstage)=<number> (1..10, default: 0)
Stages(2 poles per stage)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_gongBeater
Impulsegain(dB)=<number>
(-70.000..0.000, default: -70.000)
Impulse gain (dB)
Strikegain(dB)=<number> (-70.000..0.000, default: 0.000)
Strike gain (dB)
Strikeduration(s)=<number> (0.001..0.200, default: 0.101)
Strike duration (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_gong
Innerdamping=<number> (0.000..1.000,
default: 0.500)
Inner damping
Outerdamping=<number> (0.000..1.000, default: 0.500)
Outer damping
Micposition=<number> (0.000..1.000, default: 0.250)
Mic position
Innersize1=<number> (0.000..1.000, default: 0.500)
Inner size 1
Innerstiffness1+=<number> (0.000..1.000, default:
0.500)
Inner stiffness 1 +
Innerstiffness1-=<number> (0.000..1.000, default:
0.500)
Inner stiffness 1 -
Innersize2=<number> (0.000..1.000, default: 0.500)
Inner size 2
Innerstiffness2+=<number> (0.000..1.000, default:
0.500)
Inner stiffness 2 +
Innerstiffness2-=<number> (0.000..1.000, default:
0.500)
Inner stiffness 2 -
Innersize3=<number> (0.000..1.000, default: 0.500)
Inner size 3
Innerstiffness3+=<number> (0.000..1.000, default:
0.500)
Inner stiffness 3 +
Innerstiffness3-=<number> (0.000..1.000, default:
0.500)
Inner stiffness 3 -
Innersize4=<number> (0.000..1.000, default: 0.500)
Inner size 4
Innerstiffness4+=<number> (0.000..1.000, default:
0.500)
Inner stiffness 4 +
Innerstiffness4-=<number> (0.000..1.000, default:
0.500)
Inner stiffness 4 -
Outersize1=<number> (0.000..1.000, default: 0.500)
Outer size 1
Outerstiffness1+=<number> (0.000..1.000, default:
0.500)
Outer stiffness 1 +
Outerstiffness1-=<number> (0.000..1.000, default:
0.500)
Outer stiffness 1 -
Outersize2=<number> (0.000..1.000, default: 0.500)
Outer size 2
Outerstiffness2+=<number> (0.000..1.000, default:
0.500)
Outer stiffness 2 +
Outerstiffness2-=<number> (0.000..1.000, default:
0.500)
Outer stiffness 2 -
Outersize3=<number> (0.000..1.000, default: 0.500)
Outer size 3
Outerstiffness3+=<number> (0.000..1.000, default:
0.500)
Outer stiffness 3 +
Outerstiffness3-=<number> (0.000..1.000, default:
0.500)
Outer stiffness 3 -
Outersize4=<number> (0.000..1.000, default: 0.500)
Outer size 4
Outerstiffness4+=<number> (0.000..1.000, default:
0.500)
Outer stiffness 4 +
Outerstiffness4-=<number> (0.000..1.000, default:
0.500)
Outer stiffness 4 -
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_grain_scatter
Density(Grains/s)=<number> (default:
10.000)
Density (Grains/s)
Scatter(s)=<number> (0.000..5.000, default: 2.500)
Scatter (s)
GrainLength(s)=<number> (default: 0.200)
Grain Length (s)
GrainAttack(s)=<number> (default: 0.050)
Grain Attack (s)
Suboptions for fa_ladspa_hard_gate
Threshold=<number> (0.000..1.000, default:
0.000)
Threshold
Suboptions for fa_ladspa_hardLimiter
dBlimit=<number> (-50.000..0.000,
default: 0.000)
dB limit
Wetlevel=<number> (0.000..1.000, default: 0.000)
Wet level
Residuelevel=<number> (0.000..1.000, default: 0.000)
Residue level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_harmonicGen
Fundamentalmagnitude=<number>
(-1.000..1.000, default: 0.000)
Fundamental magnitude
2ndharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
2nd harmonic magnitude
3rdharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
3rd harmonic magnitude
4thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
4th harmonic magnitude
5thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
5th harmonic magnitude
6thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
6th harmonic magnitude
7thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
7th harmonic magnitude
8thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
8th harmonic magnitude
9thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
9th harmonic magnitude
10thharmonicmagnitude=<number> (-1.000..1.000, default:
0.000)
10th harmonic magnitude
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_hermesFilter
LFO1freq(Hz)=<number>
(0.000..1000.000, default: 250.000)
LFO1 freq (Hz)
LFO1wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number>
(0..4, default: 250)
LFO1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)
LFO2freq(Hz)=<number> (0.000..1000.000, default: 250.000)
LFO2 freq (Hz)
LFO2wave(0=sin,1=tri,2=saw,3=squ,4=s&h)=<number>
(0..4, default: 250)
LFO2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = s&h)
Osc1freq(Hz)=<number> (0.000..4000.000, default: 440.000)
Osc1 freq (Hz)
Osc1wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number>
(0..4, default: 440)
Osc1 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)
Osc2freq(Hz)=<number> (0.000..4000.000, default: 440.000)
Osc2 freq (Hz)
Osc2wave(0=sin,1=tri,2=saw,3=squ,4=noise)=<number>
(0..4, default: 440)
Osc2 wave (0 = sin, 1 = tri, 2 = saw, 3 = squ, 4 = noise)
Ringmod1depth(0=none,1=AM,2=RM)=<number>
(0.000..2.000, default: 440.000)
Ringmod 1 depth (0=none, 1=AM, 2=RM)
Ringmod2depth(0=none,1=AM,2=RM)=<number>
(0.000..2.000, default: 440.000)
Ringmod 2 depth (0=none, 1=AM, 2=RM)
Ringmod3depth(0=none,1=AM,2=RM)=<number>
(0.000..2.000, default: 440.000)
Ringmod 3 depth (0=none, 1=AM, 2=RM)
Osc1gain(dB)=<number> (-70.000..20.000, default: -70.000)
Osc1 gain (dB)
RM1gain(dB)=<number> (-70.000..20.000, default: -70.000)
RM1 gain (dB)
Osc2gain(dB)=<number> (-70.000..20.000, default: -70.000)
Osc2 gain (dB)
RM2gain(dB)=<number> (-70.000..20.000, default: -70.000)
RM2 gain (dB)
Inputgain(dB)=<number> (-70.000..20.000, default: -70.000)
Input gain (dB)
RM3gain(dB)=<number> (-70.000..20.000, default: -70.000)
RM3 gain (dB)
Xoverlowerfreq=<number> (50.000..6000.000, default:
1537.500)
Xover lower freq
Xoverupperfreq=<number> (1000.000..10000.000, default:
7750.000)
Xover upper freq
Dist1drive=<number> (0.000..3.000, default: 7750.000)
Dist1 drive
Dist2drive=<number> (0.000..3.000, default: 7750.000)
Dist2 drive
Dist3drive=<number> (0.000..3.000, default: 7750.000)
Dist3 drive
Filt1type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number>
(0..5, default: 7750)
Filt1 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)
Filt1freq=<number> (0.000..8000.000, default: 440.000)
Filt1 freq
Filt1q=<number> (0.000..1.000, default: 440.000)
Filt1 q
Filt1resonance=<number> (0.000..1.000, default: 440.000)
Filt1 resonance
Filt1LFO1level=<number> (-500.000..500.000, default:
440.000)
Filt1 LFO1 level
Filt1LFO2level=<number> (-500.000..500.000, default:
440.000)
Filt1 LFO2 level
Filt2type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number>
(0..5, default: 440)
Filt2 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)
Filt2freq=<number> (0.000..8000.000, default: 440.000)
Filt2 freq
Filt2q=<number> (0.000..1.000, default: 440.000)
Filt2 q
Filt2resonance=<number> (0.000..1.000, default: 440.000)
Filt2 resonance
Filt2LFO1level=<number> (-500.000..500.000, default:
440.000)
Filt2 LFO1 level
Filt2LFO2level=<number> (-500.000..500.000, default:
440.000)
Filt2 LFO2 level
Filt3type(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number>
(0..5, default: 440)
Filt3 type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)
Filt3freq=<number> (0.000..8000.000, default: 440.000)
Filt3 freq
Filt3q=<number> (0.000..1.000, default: 440.000)
Filt3 q
Filt3resonance=<number> (0.000..1.000, default: 440.000)
Filt3 resonance
Filt3LFO1level=<number> (-500.000..500.000, default:
440.000)
Filt3 LFO1 level
Filt3LFO2level=<number> (-500.000..500.000, default:
440.000)
Filt3 LFO2 level
Delay1length(s)=<number> (0.000..2.000, default: 440.000)
Delay1 length (s)
Delay1feedback=<number> (0.000..1.000, default: 440.000)
Delay1 feedback
Delay1wetness=<number> (0.000..1.000, default: 440.000)
Delay1 wetness
Delay2length(s)=<number> (0.000..2.000, default: 440.000)
Delay2 length (s)
Delay2feedback=<number> (0.000..1.000, default: 440.000)
Delay2 feedback
Delay2wetness=<number> (0.000..1.000, default: 440.000)
Delay2 wetness
Delay3length(s)=<number> (0.000..2.000, default: 440.000)
Delay3 length (s)
Delay3feedback=<number> (0.000..1.000, default: 440.000)
Delay3 feedback
Delay3wetness=<number> (0.000..1.000, default: 440.000)
Delay3 wetness
Band1gain(dB)=<number> (-70.000..20.000, default:
440.000)
Band 1 gain (dB)
Band2gain(dB)=<number> (-70.000..20.000, default:
440.000)
Band 2 gain (dB)
Band3gain(dB)=<number> (-70.000..20.000, default:
440.000)
Band 3 gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_hpf
CutoffFrequency(Hz)=<number>
(0.000..0.500, default: 440.000)
Cutoff Frequency (Hz)
Suboptions for fa_ladspa_pitchScaleHQ
Pitchco-efficient=<number> (0.500..2.000,
default: 0.000)
Pitch co-efficient
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_imp
ImpulseID=<number> (1..21, default:
0)
Impulse ID
Highlatencymode=<number> (0..1, default: 0)
High latency mode
Gain(dB)=<number> (-90.000..24.000, default: 0.000)
Gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_inv
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_karaoke
Vocalvolume(dB)=<number>
(-70.000..0.000, default: 0.000)
Vocal volume (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_lcrDelay
Ldelay(ms)=<number> (0.000..2700.000,
default: 675.000)
L delay (ms)
Llevel=<number> (0.000..50.000, default: 25.000)
L level
Cdelay(ms)=<number> (0.000..2700.000, default: 675.000)
C delay (ms)
Clevel=<number> (0.000..50.000, default: 25.000)
C level
Rdelay(ms)=<number> (0.000..2700.000, default: 675.000)
R delay (ms)
Rlevel=<number> (0.000..50.000, default: 25.000)
R level
Feedback=<number> (-100.000..100.000, default: 25.000)
Feedback
Highdamp(%)=<number> (0.000..100.000, default: 50.000)
High damp (%)
Lowdamp(%)=<number> (0.000..100.000, default: 50.000)
Low damp (%)
Spread=<number> (0.000..50.000, default: 25.000)
Spread
Dry/Wetlevel=<number> (0.000..1.000, default: 25.000)
Dry/Wet level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_lfoPhaser
LFOrate(Hz)=<number> (0.000..100.000,
default: 25.000)
LFO rate (Hz)
LFOdepth=<number> (0.000..1.000, default: 0.250)
LFO depth
Feedback=<number> (-1.000..1.000, default: 0.250)
Feedback
Spread(octaves)=<number> (0.000..2.000, default: 1.000)
Spread (octaves)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_lsFilter
Filtertype(0=LP,1=BP,2=HP)=<number>
(0..2, default: 0)
Filter type (0=LP, 1=BP, 2=HP)
Cutofffrequency(Hz)=<number> (0.002..0.500, default: 0.032)
Cutoff frequency (Hz)
Resonance=<number> (0.000..1.000, default: 0.032)
Resonance
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_lofi
Crackling(%)=<number> (0..100, default:
0)
Crackling (%)
PowersupplyOverloading(%)=<number> (0.000..100.000, default:
0.000)
Powersupply Overloading (%)
OpampBandwidthLimiting(Hz)=<number> (1.000..10000.000,
default: 0.000)
Opamp Bandwidth Limiting (Hz)
Suboptions for fa_ladspa_lpf
CutoffFrequency(Hz)=<number>
(0.000..0.500, default: 440.000)
Cutoff Frequency (Hz)
Suboptions for fa_ladspa_notch_iir
CenterFrequency(Hz)=<number>
(0.000..0.450, default: 0.007)
Center Frequency (Hz)
Bandwidth(Hz)=<number> (0.000..0.450, default: 0.007)
Bandwidth (Hz)
Stages(2polesperstage)=<number> (1..10, default: 0)
Stages(2 poles per stage)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_matrixSpatialiser
Width=<number> (-512..512, default: 0)
Width
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_matrixMSSt
Width=<number> (0.000..2.000, default:
0.000)
Width
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_matrixStMS
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_mbeq
50Hzgain(lowshelving)=<number>
(-70.000..30.000, default: 0.000)
50Hz gain (low shelving)
100Hzgain=<number> (-70.000..30.000, default: 0.000)
100Hz gain
156Hzgain=<number> (-70.000..30.000, default: 0.000)
156Hz gain
220Hzgain=<number> (-70.000..30.000, default: 0.000)
220Hz gain
311Hzgain=<number> (-70.000..30.000, default: 0.000)
311Hz gain
440Hzgain=<number> (-70.000..30.000, default: 0.000)
440Hz gain
622Hzgain=<number> (-70.000..30.000, default: 0.000)
622Hz gain
880Hzgain=<number> (-70.000..30.000, default: 0.000)
880Hz gain
1250Hzgain=<number> (-70.000..30.000, default: 0.000)
1250Hz gain
1750Hzgain=<number> (-70.000..30.000, default: 0.000)
1750Hz gain
2500Hzgain=<number> (-70.000..30.000, default: 0.000)
2500Hz gain
3500Hzgain=<number> (-70.000..30.000, default: 0.000)
3500Hz gain
5000Hzgain=<number> (-70.000..30.000, default: 0.000)
5000Hz gain
10000Hzgain=<number> (-70.000..30.000, default: 0.000)
10000Hz gain
20000Hzgain=<number> (-70.000..30.000, default: 0.000)
20000Hz gain
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_multivoiceChorus
Numberofvoices=<number> (1..8,
default: 0)
Number of voices
Delaybase(ms)=<number> (10.000..40.000, default: 10.000)
Delay base (ms)
Voiceseparation(ms)=<number> (0.000..2.000, default: 0.500)
Voice separation (ms)
Detune(%)=<number> (0.000..5.000, default: 0.500)
Detune (%)
LFOfrequency(Hz)=<number> (2.000..30.000, default: 9.000)
LFO frequency (Hz)
Outputattenuation(dB)=<number> (-20.000..0.000, default:
9.000)
Output attenuation (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_pitchScale
Pitchco-efficient=<number> (0.500..2.000,
default: 0.000)
Pitch co-efficient
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_pointerCastDistortion
Effectcutofffreq(Hz)=<number>
(0.000..0.300, default: 0.001)
Effect cutoff freq (Hz)
Dry/wetmix=<number> (0.000..1.000, default: 0.001)
Dry/wet mix
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_random_fasc_oa
WaveSmoothness=<number> (0.000..1.000,
default: 1.000)
Wave Smoothness
Suboptions for fa_ladspa_random_fcsa_oa
Frequenz(Hz)=<number> (0.000..0.500,
default: 440.000)
Frequenz (Hz)
Suboptions for fa_ladspa_rateShifter
Rate=<number> (-4.000..4.000, default:
0.000)
Rate
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_retroFlange
Averagestall(ms)=<number>
(0.000..10.000, default: 2.500)
Average stall (ms)
Flangefrequency(Hz)=<number> (0.500..8.000, default: 2.500)
Flange frequency (Hz)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_revdelay
DelayTime(s)=<number> (0.000..5.000,
default: 0.000)
Delay Time (s)
DryLevel(dB)=<number> (-70.000..0.000, default: 0.000)
Dry Level (dB)
WetLevel(dB)=<number> (-70.000..0.000, default: 0.000)
Wet Level (dB)
Feedback=<number> (0.000..1.000, default: 0.000)
Feedback
Crossfadesamples=<number> (0..5000, default: 1250)
Crossfade samples
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_ringmod_1i1o1l
Modulationdepth(0=none,1=AM,2=RM)=<number>
(0.000..2.000, default: 0.000)
Modulation depth (0=none, 1=AM, 2=RM)
Frequency(Hz)=<number> (1.000..1000.000, default: 440.000)
Frequency (Hz)
Sinelevel=<number> (-1.000..1.000, default: 440.000)
Sine level
Trianglelevel=<number> (-1.000..1.000, default: 440.000)
Triangle level
Sawtoothlevel=<number> (-1.000..1.000, default: 440.000)
Sawtooth level
Squarelevel=<number> (-1.000..1.000, default: 440.000)
Square level
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_sc1
Attacktime(ms)=<number>
(2.000..400.000, default: 101.500)
Attack time (ms)
Releasetime(ms)=<number> (2.000..800.000, default: 401.000)
Release time (ms)
Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)
Threshold level (dB)
Ratio(1:n)=<number> (1.000..10.000, default: 0.000)
Ratio (1:n)
Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)
Knee radius (dB)
Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)
Makeup gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_sc4
RMS/peak=<number> (0.000..1.000, default:
0.000)
RMS/peak
Attacktime(ms)=<number> (1.500..400.000, default: 101.125)
Attack time (ms)
Releasetime(ms)=<number> (2.000..800.000, default: 401.000)
Release time (ms)
Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)
Threshold level (dB)
Ratio(1:n)=<number> (1.000..20.000, default: 0.000)
Ratio (1:n)
Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)
Knee radius (dB)
Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)
Makeup gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_sc4m
RMS/peak=<number> (0.000..1.000, default:
0.000)
RMS/peak
Attacktime(ms)=<number> (1.500..400.000, default: 101.125)
Attack time (ms)
Releasetime(ms)=<number> (2.000..800.000, default: 401.000)
Release time (ms)
Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)
Threshold level (dB)
Ratio(1:n)=<number> (1.000..20.000, default: 0.000)
Ratio (1:n)
Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)
Knee radius (dB)
Makeupgain(dB)=<number> (0.000..24.000, default: 3.250)
Makeup gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_se4
RMS/peak=<number> (0.000..1.000, default:
0.000)
RMS/peak
Attacktime(ms)=<number> (1.500..400.000, default: 101.125)
Attack time (ms)
Releasetime(ms)=<number> (2.000..800.000, default: 401.000)
Release time (ms)
Thresholdlevel(dB)=<number> (-30.000..0.000, default: 0.000)
Threshold level (dB)
Ratio(1:n)=<number> (1.000..20.000, default: 0.000)
Ratio (1:n)
Kneeradius(dB)=<number> (1.000..10.000, default: 3.250)
Knee radius (dB)
Attenuation(dB)=<number> (-24.000..0.000, default: 3.250)
Attenuation (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_difference_iamc_oa
InputtoSubtract=<number> (default:
0.000)
Input to Subtract
Suboptions for fa_ladspa_difference_icma_oa
Input=<number> (default: 0.000)
Input
Suboptions for fa_ladspa_product_iaic_oa
SecondInput=<number> (default: 0.000)
Second Input
Suboptions for fa_ladspa_ratio_nadc_oa
Denominator=<number> (default: 0.000)
Denominator
Suboptions for fa_ladspa_ratio_ncda_oa
Numerator=<number> (default: 0.000)
Numerator
Suboptions for fa_ladspa_sum_iaic_oa
SecondInput=<number> (default: 0.000)
Second Input
Suboptions for fa_ladspa_sifter
Siftsize=<number> (1.000..1000.000,
default: 0.000)
Sift size
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_compress_peak
Threshold=<number> (default: 0.000)
Threshold
CompressionRatio=<number> (default: 0.500)
Compression Ratio
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_compress_rms
Threshold=<number> (default: 0.000)
Threshold
CompressionRatio=<number> (default: 0.500)
Compression Ratio
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_expand_peak
Threshold=<number> (default: 0.000)
Threshold
ExpansionRatio=<number> (default: 0.500)
Expansion Ratio
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_expand_rms
Threshold=<number> (default: 0.000)
Threshold
ExpansionRatio=<number> (default: 0.500)
Expansion Ratio
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_limit_peak
Threshold=<number> (default: 0.000)
Threshold
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_limit_rms
Threshold=<number> (default: 0.000)
Threshold
OutputEnvelopeAttack(s)=<number> (default: 0.100)
Output Envelope Attack (s)
OutputEnvelopeDecay(s)=<number> (default: 0.100)
Output Envelope Decay (s)
Suboptions for fa_ladspa_amp
Ampsgain(dB)=<number>
(-70.000..70.000, default: 0.000)
Amps gain (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_delay_c
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_delay_l
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_delay_n
MaxDelay(s)=<number> (default: 0.000)
Max Delay (s)
DelayTime(s)=<number> (default: 0.000)
Delay Time (s)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_sine_faac
Amplitude=<number> (default: 0.000)
Amplitude
Suboptions for fa_ladspa_sine_fcaa
Frequency=<number> (0.000..0.500, default:
440.000)
Frequency
Suboptions for fa_ladspa_singlePara
Gain(dB)=<number> (-70.000..30.000,
default: 0.000)
Gain (dB)
Frequency(Hz)=<number> (0.000..0.400, default: 440.000)
Frequency (Hz)
Bandwidth(octaves)=<number> (0.000..4.000, default: 440.000)
Bandwidth (octaves)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_sinusWavewrapper
Wrapdegree=<number> (0.000..10.000,
default: 0.000)
Wrap degree
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_smoothDecimate
Resamplerate=<number> (0.000..1.000,
default: 1.000)
Resample rate
Smoothing=<number> (0.000..1.000, default: 1.000)
Smoothing
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_svf
Filtertype(0=none,1=LP,2=HP,3=BP,4=BR,5=AP)=<number>
(0..5, default: 0)
Filter type (0=none, 1=LP, 2=HP, 3=BP, 4=BR, 5=AP)
Filterfreq=<number> (0.000..6000.000, default: 440.000)
Filter freq
FilterQ=<number> (0.000..1.000, default: 0.250)
Filter Q
Filterresonance=<number> (0.000..1.000, default: 0.250)
Filter resonance
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_autopan
Frequency[Hz]=<number> (0.000..20.000,
default: 0.000)
Frequency [Hz]
Depth[%]=<number> (0.000..100.000, default: 0.000)
Depth [%]
Gain[dB]=<number> (-70.000..20.000, default: 0.000)
Gain [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_chorusflanger
Frequency[Hz]=<number> (0.000..5.000,
default: 1.250)
Frequency [Hz]
L/RPhaseShift[deg]=<number> (0.000..180.000, default:
90.000)
L/R Phase Shift [deg]
Depth[%]=<number> (0.000..100.000, default: 75.000)
Depth [%]
Delay[ms]=<number> (0.000..100.000, default: 25.000)
Delay [ms]
Contour[Hz]=<number> (20.000..20000.000, default: 100.000)
Contour [Hz]
DryLevel[dB]=<number> (-90.000..20.000, default: 100.000)
Dry Level [dB]
WetLevel[dB]=<number> (-90.000..20.000, default: 100.000)
Wet Level [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_deesser
ThresholdLevel[dB]=<number>
(-50.000..10.000, default: 0.000)
Threshold Level [dB]
Frequency[Hz]=<number> (2000.000..16000.000, default:
5500.000)
Frequency [Hz]
SidechainFilter=<number> (0..1, default: 5500)
Sidechain Filter
Monitor=<number> (0..1, default: 5500)
Monitor
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_dynamics_m
Attack[ms]=<number> (4.000..500.000,
default: 128.000)
Attack [ms]
Release[ms]=<number> (4.000..1000.000, default: 502.000)
Release [ms]
OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)
Offset Gain [dB]
MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)
Makeup Gain [dB]
Function=<number> (0..14, default: 502)
Function
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_dynamics_st
Attack[ms]=<number> (4.000..500.000,
default: 128.000)
Attack [ms]
Release[ms]=<number> (4.000..1000.000, default: 502.000)
Release [ms]
OffsetGain[dB]=<number> (-20.000..20.000, default: 502.000)
Offset Gain [dB]
MakeupGain[dB]=<number> (-20.000..20.000, default: 502.000)
Makeup Gain [dB]
StereoMode=<number> (0..2, default: 502)
Stereo Mode
Function=<number> (0..14, default: 502)
Function
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_equalizer
Band1Gain[dB]=<number>
(-50.000..20.000, default: 0.000)
Band 1 Gain [dB]
Band2Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 2 Gain [dB]
Band3Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 3 Gain [dB]
Band4Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 4 Gain [dB]
Band5Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 5 Gain [dB]
Band6Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 6 Gain [dB]
Band7Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 7 Gain [dB]
Band8Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 8 Gain [dB]
Band1Freq[Hz]=<number> (40.000..280.000, default:
100.000)
Band 1 Freq [Hz]
Band2Freq[Hz]=<number> (100.000..500.000, default:
200.000)
Band 2 Freq [Hz]
Band3Freq[Hz]=<number> (200.000..1000.000, default:
400.000)
Band 3 Freq [Hz]
Band4Freq[Hz]=<number> (400.000..2800.000, default:
1000.000)
Band 4 Freq [Hz]
Band5Freq[Hz]=<number> (1000.000..5000.000, default:
3000.000)
Band 5 Freq [Hz]
Band6Freq[Hz]=<number> (3000.000..9000.000, default:
6000.000)
Band 6 Freq [Hz]
Band7Freq[Hz]=<number> (6000.000..18000.000, default:
12000.000)
Band 7 Freq [Hz]
Band8Freq[Hz]=<number> (10000.000..20000.000, default:
15000.000)
Band 8 Freq [Hz]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_equalizer_bw
Band1Gain[dB]=<number>
(-50.000..20.000, default: 0.000)
Band 1 Gain [dB]
Band2Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 2 Gain [dB]
Band3Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 3 Gain [dB]
Band4Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 4 Gain [dB]
Band5Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 5 Gain [dB]
Band6Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 6 Gain [dB]
Band7Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 7 Gain [dB]
Band8Gain[dB]=<number> (-50.000..20.000, default:
0.000)
Band 8 Gain [dB]
Band1Freq[Hz]=<number> (40.000..280.000, default:
100.000)
Band 1 Freq [Hz]
Band2Freq[Hz]=<number> (100.000..500.000, default:
200.000)
Band 2 Freq [Hz]
Band3Freq[Hz]=<number> (200.000..1000.000, default:
400.000)
Band 3 Freq [Hz]
Band4Freq[Hz]=<number> (400.000..2800.000, default:
1000.000)
Band 4 Freq [Hz]
Band5Freq[Hz]=<number> (1000.000..5000.000, default:
3000.000)
Band 5 Freq [Hz]
Band6Freq[Hz]=<number> (3000.000..9000.000, default:
6000.000)
Band 6 Freq [Hz]
Band7Freq[Hz]=<number> (6000.000..18000.000, default:
12000.000)
Band 7 Freq [Hz]
Band8Freq[Hz]=<number> (10000.000..20000.000, default:
15000.000)
Band 8 Freq [Hz]
Band1Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 1 Bandwidth [octaves]
Band2Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 2 Bandwidth [octaves]
Band3Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 3 Bandwidth [octaves]
Band4Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 4 Bandwidth [octaves]
Band5Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 5 Bandwidth [octaves]
Band6Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 6 Bandwidth [octaves]
Band7Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 7 Bandwidth [octaves]
Band8Bandwidth[octaves]=<number> (0.100..5.000, default:
15000.000)
Band 8 Bandwidth [octaves]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_doubler
TimeTracking=<number> (0.000..1.000,
default: 0.500)
Time Tracking
PitchTracking=<number> (0.000..1.000, default: 0.500)
Pitch Tracking
DryLevel[dB]=<number> (-90.000..20.000, default: 0.500)
Dry Level [dB]
DryLeftPosition=<number> (0.000..1.000, default: 0.000)
Dry Left Position
DryRightPosition=<number> (0.000..1.000, default: 1.000)
Dry Right Position
WetLevel[dB]=<number> (-90.000..20.000, default: 1.000)
Wet Level [dB]
WetLeftPosition=<number> (0.000..1.000, default: 0.000)
Wet Left Position
WetRightPosition=<number> (0.000..1.000, default: 1.000)
Wet Right Position
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_pinknoise
FractalDimension=<number> (0.000..1.000,
default: 0.500)
Fractal Dimension
SignalLevel[dB]=<number> (-90.000..20.000, default: 0.500)
Signal Level [dB]
NoiseLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Noise Level [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_pitch
SemitoneShift=<number> (-12.000..12.000,
default: 0.000)
Semitone Shift
RateShift[%]=<number> (-50.000..100.000, default: 0.000)
Rate Shift [%]
DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Dry Level [dB]
WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Wet Level [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_reflector
FragmentLength[ms]=<number>
(20.000..1600.000, default: 415.000)
Fragment Length [ms]
DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Dry Level [dB]
WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Wet Level [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_reverb
Decay[ms]=<number> (0.000..10000.000,
default: 2500.000)
Decay [ms]
DryLevel[dB]=<number> (-70.000..10.000, default: 2500.000)
Dry Level [dB]
WetLevel[dB]=<number> (-70.000..10.000, default: 2500.000)
Wet Level [dB]
CombFilters=[1|0] (default: 1)
Comb Filters
AllpassFilters=[1|0] (default: 1)
Allpass Filters
BandpassFilter=[1|0] (default: 1)
Bandpass Filter
EnhancedStereo=[1|0] (default: 1)
Enhanced Stereo
ReverbType=<number> (0..42, default: 2500)
Reverb Type
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_rotspeak
RotorFrequency[Hz]=<number>
(0.000..30.000, default: 0.000)
Rotor Frequency [Hz]
HornFrequency[Hz]=<number> (0.000..30.000, default: 0.000)
Horn Frequency [Hz]
MicDistance[%]=<number> (0.000..100.000, default: 25.000)
Mic Distance [%]
Rotor/HornMix=<number> (0.000..1.000, default: 0.500)
Rotor/Horn Mix
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_limiter
LimitLevel[dB]=<number>
(-30.000..20.000, default: 0.000)
Limit Level [dB]
OutputVolume[dB]=<number> (-30.000..20.000, default: 0.000)
Output Volume [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_sigmoid
PreGain[dB]=<number>
(-90.000..20.000, default: 0.000)
Pre Gain [dB]
PostGain[dB]=<number> (-90.000..20.000, default: 0.000)
Post Gain [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_stereo_echo
LDelay[ms]=<number> (0.000..2000.000,
default: 100.000)
L Delay [ms]
LFeedback[%]=<number> (0.000..100.000, default: 100.000)
L Feedback [%]
R/HaasDelay[ms]=<number> (0.000..2000.000, default: 100.000)
R/Haas Delay [ms]
R/HaasFeedback[%]=<number> (0.000..100.000, default:
100.000)
R/Haas Feedback [%]
LEchoLevel[dB]=<number> (-70.000..10.000, default:
100.000)
L Echo Level [dB]
REchoLevel[dB]=<number> (-70.000..10.000, default:
100.000)
R Echo Level [dB]
DryLevel[dB]=<number> (-70.000..10.000, default: 100.000)
Dry Level [dB]
CrossMode=[1|0] (default: 1)
Cross Mode
HaasEffect=[1|0] (default: 1)
Haas Effect
SwapOutputs=[1|0] (default: 1)
Swap Outputs
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_tremolo
Frequency[Hz]=<number> (0.000..20.000,
default: 0.000)
Frequency [Hz]
Depth[%]=<number> (0.000..100.000, default: 0.000)
Depth [%]
Gain[dB]=<number> (-70.000..20.000, default: 0.000)
Gain [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_tubewarmth
Drive=<number> (0.100..10.000, default:
2.575)
Drive
Tape--TubeBlend=<number> (-10.000..10.000, default: 10.000)
Tape--Tube Blend
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tap_vibrato
Frequency[Hz]=<number> (0.000..30.000,
default: 0.000)
Frequency [Hz]
Depth[%]=<number> (0.000..20.000, default: 0.000)
Depth [%]
DryLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Dry Level [dB]
WetLevel[dB]=<number> (-90.000..20.000, default: -90.000)
Wet Level [dB]
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_tapeDelay
Tapespeed(inches/sec,1=normal)=<number>
(0.000..10.000, default: 0.000)
Tape speed (inches/sec, 1=normal)
Drylevel(dB)=<number> (-90.000..0.000, default: -90.000)
Dry level (dB)
Tap1distance(inches)=<number> (0.000..4.000, default:
-90.000)
Tap 1 distance (inches)
Tap1level(dB)=<number> (-90.000..0.000, default:
-90.000)
Tap 1 level (dB)
Tap2distance(inches)=<number> (0.000..4.000, default:
1.000)
Tap 2 distance (inches)
Tap2level(dB)=<number> (-90.000..0.000, default:
-90.000)
Tap 2 level (dB)
Tap3distance(inches)=<number> (0.000..4.000, default:
2.000)
Tap 3 distance (inches)
Tap3level(dB)=<number> (-90.000..0.000, default:
-90.000)
Tap 3 level (dB)
Tap4distance(inches)=<number> (0.000..4.000, default:
3.000)
Tap 4 distance (inches)
Tap4level(dB)=<number> (-90.000..0.000, default:
-90.000)
Tap 4 level (dB)
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_transient
Attackspeed=<number> (-1.000..1.000,
default: 0.000)
Attack speed
Sustaintime=<number> (-1.000..1.000, default: 0.000)
Sustain time
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_triplePara
Low-shelvinggain(dB)=<number>
(-70.000..30.000, default: 0.000)
Low-shelving gain (dB)
Low-shelvingfrequency(Hz)=<number> (0.000..0.490, default:
0.000)
Low-shelving frequency (Hz)
Low-shelvingslope=<number> (0.000..1.000, default: 0.500)
Low-shelving slope
Band1gain(dB)=<number> (-70.000..30.000, default:
0.500)
Band 1 gain (dB)
Band1frequency(Hz)=<number> (0.000..0.490, default:
0.001)
Band 1 frequency (Hz)
Band1bandwidth(octaves)=<number> (0.000..4.000, default:
0.001)
Band 1 bandwidth (octaves)
Band2gain(dB)=<number> (-70.000..30.000, default:
0.001)
Band 2 gain (dB)
Band2frequency(Hz)=<number> (0.000..0.490, default:
0.007)
Band 2 frequency (Hz)
Band2bandwidth(octaves)=<number> (0.000..4.000, default:
0.007)
Band 2 bandwidth (octaves)
Band3gain(dB)=<number> (-70.000..30.000, default:
0.007)
Band 3 gain (dB)
Band3frequency(Hz)=<number> (0.000..0.490, default:
0.059)
Band 3 frequency (Hz)
Band3bandwidth(octaves)=<number> (0.000..4.000, default:
0.059)
Band 3 bandwidth (octaves)
High-shelvinggain(dB)=<number> (-70.000..30.000, default:
0.059)
High-shelving gain (dB)
High-shelvingfrequency(Hz)=<number> (0.000..0.490, default:
0.490)
High-shelving frequency (Hz)
High-shelvingslope=<number> (0.000..1.000, default: 0.500)
High-shelving slope
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_vcf303
Trigger=[1|0] (default: 0)
Trigger
Cutoff=<number> (0.000..1.000, default: 0.000)
Cutoff
Resonance=<number> (0.000..1.000, default: 0.000)
Resonance
EnvelopeModulation=<number> (0.000..1.000, default: 0.000)
Envelope Modulation
Decay=<number> (0.000..1.000, default: 0.000)
Decay
Suboptions for fa_ladspa_valveRect
Saglevel=<number> (0.000..1.000, default:
0.000)
Sag level
Distortion=<number> (0.000..1.000, default: 0.000)
Distortion
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_valve
Distortionlevel=<number> (0.000..1.000,
default: 0.000)
Distortion level
Distortioncharacter=<number> (0.000..1.000, default: 0.000)
Distortion character
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_volume
volume=<number> (-90.00..20.00, default:
0.00)
Volume
Suboptions for fa_ladspa_vynil
Year=<number> (1900.000..1990.000, default:
1990.000)
Year
RPM=<number> (33.000..78.000, default: 33.000)
RPM
Surfacewarping=<number> (0.000..1.000, default: 33.000)
Surface warping
Crackle=<number> (0.000..1.000, default: 33.000)
Crackle
Wear=<number> (0.000..1.000, default: 33.000)
Wear
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_wshape_sine
LimitingAmplitude=<number> (default:
0.000)
Limiting Amplitude
Suboptions for fa_ladspa_shaper
Waveshape=<number> (-10.000..10.000,
default: 0.000)
Waveshape
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Suboptions for fa_ladspa_zm1
$run_adding=[1|0] (default: 0)
Add effect to input data
$run_adding_gain=<number> (-70.00..0.00, default: 0.00)
Add gain (dB)
Overall gain for this filter. This is only valid if you add the effect to the
input data
Set video filter options
video_filters={option[{suboptions}][:option[{suboptions}]...]}
Supported options: fv_onedtv fv_agingtv fv_baltantv fv_blur fv_brokentv
fv_burningtv fv_chameleontv fv_colorbalance fv_colstreaktv fv_cropscale
fv_cycletv fv_decimate fv_deinterlace fv_dicetv fv_difftv fv_tcdisplay
fv_displaywalltv fv_dottv fv_edgetv fv_edgeblurtv fv_equalizer fv_firetv
fv_flip fv_framerate fv_pixelformat fv_interlace fv_invert fv_lenstv fv_lifetv
fv_matrixtv fv_mosaictv fv_halftv fv_nervoustv fv_noisetv fv_oldcolor fv_optv
fv_puptv fv_quarktv fv_colormatrix_rgb fv_rdstv fv_revtv fv_rippletv fv_rndmtv
fv_shagadelictv fv_shift fv_simuratv fv_slofasttv fv_sparktv fv_spiraltv
fv_streaktv fv_tlp fv_timedisttv fv_transform fv_transformtv fv_tctweak
fv_vertigotv fv_warholtv fv_warptv fv_colormatrix_yuv fv_zoom bg_f0r_3 point
color balance bg_f0r_3dflippo bg_f0r_B bg_f0r_Baltan bg_f0r_Brightness
bg_f0r_Cartoon bg_f0r_Color Distance bg_f0r_Contrast0r bg_f0r_Curves
bg_f0r_Defish0r bg_f0r_Delaygrab bg_f0r_Distort0r bg_f0r_Edgeglow
bg_f0r_Equaliz0r bg_f0r_Flippo bg_f0r_G bg_f0r_Gamma bg_f0r_Glow
bg_f0r_Hueshift0r bg_f0r_Invert0r bg_f0r_K-Means Clustering bg_f0r_Lens
Correction bg_f0r_LetterB0xed bg_f0r_Levels bg_f0r_Luminance bg_f0r_Mask0Mate
bg_f0r_Nervous bg_f0r_Nikon D90 Stairstepping fix bg_f0r_Perspective bg_f0r_R
bg_f0r_RGB-Parade bg_f0r_SOP/Sat bg_f0r_Saturat0r bg_f0r_Scale0Tilt
bg_f0r_Sobel bg_f0r_Squareblur bg_f0r_TehRoxx0r bg_f0r_Threshold0r
bg_f0r_Tint0r bg_f0r_Transparency bg_f0r_Twolay0r bg_f0r_Vectorscope
bg_f0r_Vertigo bg_f0r_Water bg_f0r_White Balance bg_f0r_alpha0ps
bg_f0r_alphagrad bg_f0r_alphaspot bg_f0r_bluescreen0r bg_f0r_bw0r
bg_f0r_c0rners bg_f0r_coloradj_RGB bg_f0r_delay0r bg_f0r_nosync0r
bg_f0r_pixeliz0r bg_f0r_pr0be bg_f0r_pr0file bg_f0r_primaries
bg_f0r_scanline0r bg_f0r_select0r bg_f0r_threelay0r
Video Filters
Suboptions for fv_blur
-vm <video monitor options>
mode=<string>
Supported strings: gauss triangular box
Default: gauss
Mode
radius_h=<number> (0.5..50.0, default: 0.5)
Horizontal radius
radius_v=<number> (0.5..50.0, default: 0.5)
Vertical radius
blur_chroma=[1|0] (default: 0)
Blur chroma planes
correct_nonsquare=[1|0] (default: 0)
Correct radii for nonsquare pixels
Suboptions for fv_burningtv
mode=<string>
Supported strings: fg all
Default: all
Mode
Suboptions for fv_chameleontv
mode=<string>
Supported strings: app disapp
Default: disapp
Mode
Suboptions for fv_colorbalance
r=<number> (0.00..2.00, default: 1.00)
Red gain
g=<number> (0.00..2.00, default: 1.00)
Green gain
b=<number> (0.00..2.00, default: 1.00)
Blue gain
n=[1|0] (default: 0)
Normalize
Normalize for constant luminance.
Suboptions for fv_colstreaktv
blendnum=<number> (1..10, default: 4)
Blend num
Suboptions for fv_cropscale
crl=<number> (0.000..100000.000, default:
0.000)
Crop left
Cut this many pixels from the left border of the source images.
crr=<number> (0.000..100000.000, default: 0.000)
Crop right
Cut this many pixels from the right border of the source images.
crt=<number> (0.000..100000.000, default: 0.000)
Crop top
Cut this many pixels from the top border of the source images.
crb=<number> (0.000..100000.000, default: 0.000)
Crop bottom
Cut this many pixels from the bottom border of the source images.
s=<string>
Supported strings: from_input user_defined pal_d1 pal_d1_wide pal_dv pal_dv_wide
pal_cvd pal_vcd pal_svcd pal_svcd_wide ntsc_d1 ntsc_d1_wide ntsc_dv
ntsc_dv_wide ntsc_cvd ntsc_vcd ntsc_svcd ntsc_svcd_wide 720 1080 vga qvga
sqcif qcif cif 4cif 16cif
Default: from_input
Image size
Set the output image size. For a user defined size, you must specify the width
and height as well as the pixel width and pixel height.
w=<number> (1..100000, default: 640)
User defined width
User defined width in pixels. Only meaningful if you selected "User
defined" for the image size.
h=<number> (1..100000, default: 480)
User defined height
User defined height in pixels. Only meaningful if you selected "User
defined" for the image size.
sw=<number> (1..100000, default: 1)
User defined pixel width
User defined pixel width. Only meaningful if you selected "User
defined" for the image size.
sh=<number> (1..100000, default: 1)
User defined pixel height
User defined pixel height. Only meaningful if you selected "User
defined" for the image size.
ka=[1|0] (default: 1)
Maintain aspect ratio
Let the aspect ratio appear the same as in the source, probably resulting in
additional borders.
bc=<r>,<g>,<b> (default: 0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Border color
Color of the image borders.
squeeze=<number> (-1.000..1.000, default: 0.000)
Squeeze
zoom=<number> (20..180, default: 100)
Zoom
sm=<string>
Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell
cubic_catmull sinc_lanczos
Default: auto
Scale mode
Choose scaling method. Auto means to choose based on the conversion quality.
Nearest is fastest, Sinc with Lanczos window is slowest.
so=<number> (4..1000, default: 4)
Scale order
Order for sinc scaling
downscale_filter=<string>
Supported strings: auto none wide gauss
Default: auto
Antialiasing for downscaling
Specifies the antialiasing filter to be used when downscaling images.
downscale_blur=<number> (0.00..2.00, default: 1.00)
Blur factor for downscaling
Specifies how much blurring should be applied when downscaling. Smaller values
can speed up scaling, but might result in strong aliasing.
chroma_output=<string>
Supported strings: from_input 444 422 420mpeg1 420mpeg2 420paldv 411
Default: from_input
Chroma output
Set the output chroma format to that of the destination. This can save one
chroma scaling operation at a later stage. It only works if the input
pixelformat is otherwise compatible to the output.
deinterlace=<string>
Supported strings: never auto always
Default: never
Deinterlace
ddm=<string>
Supported strings: top bottom
Default: top
Drop mode
Specifies which field the deinterlacer should drop.
Suboptions for fv_decimate
threshold_block=<number> (0.00..1.00,
default: 0.00)
Block threshold
Specifies how much a block may differ from the last non-skipped block. 0 means
identical blocks, 1 means completely different blocks. Note that the meaning
of "completely different" depends on the colorspace.
threshold_total=<number> (0.00..1.00, default: 0.00)
Total threshold
Specifies how much a frame may differ from the last non-skipped frame. 0 means
identical frames, 1 means completely different frames. Note that the meaning
of "completely different" depends on the colorspace.
skip_max=<number> (1..500, default: 10)
Maximum skipped frames
Maximum number of consecutive skipped frames
do_log=[1|0] (default: 0)
Report results
Log reports about skipped frames
Suboptions for fv_deinterlace
method=<string>
Supported strings: none copy scale_hw scale_sw blend yadif yadif_fast
Default: none
Method
force=[1|0] (default: 0)
Force deinterlacing
Always perform deinterlacing even if the source format pretends to be
progressive
output_mode=<string>
Supported strings: top bottom first second both
Default: top
Output mode
Specify which field to output. Outputting both fields is not always supported.
sm=<string>
Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell
cubic_catmull sinc_lanczos
Default: auto
Scale mode
Choose scaling method. Auto means to choose based on the conversion quality.
Nearest is fastest, Sinc with Lanczos window is slowest.
so=<number> (4..1000, default: 4)
Scale order
Order for sinc scaling
Suboptions for fv_dicetv
g_cube_bits=<number> (0..5, default: 4)
Square Size
Suboptions for fv_difftv
tolerance=<number> (0..255, default: 10)
Tolerance
Suboptions for fv_tcdisplay
interpolate=[1|0] (default: 1)
Interpolate missing
Interpolate missing timecodes
color=<r>,<g>,<b>,<a> (default:
1.000,1.000,1.000,1.000)
<r>, <g>, <b> and <a> are in the range 0.0..1.0
Text color
border_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Border color
border_width=<number> (0.00..10.00, default: 2.00)
Border width
font=<string> (Default: Courier-20)
Font
justify_h=<string>
Supported strings: center left right
Default: right
Horizontal justify
justify_v=<string>
Supported strings: center top bottom
Default: top
Vertical justify
border_left=<number> (0..65535, default: 10)
Left border
Distance from the left text border to the image border
border_right=<number> (0..65535, default: 10)
Right border
Distance from the right text border to the image border
border_top=<number> (0..65535, default: 10)
Top border
Distance from the top text border to the image border
border_bottom=<number> (0..65535, default: 10)
Bottom border
Distance from the bottom text border to the image border
Suboptions for fv_displaywalltv
scale=<number> (1..9, default: 3)
Scale
speedx=<number> (-100..100, default: 10)
Horizontal scroll speed
speedy=<number> (-100..100, default: 10)
Vertical scroll speed
Suboptions for fv_dottv
mode=<string>
Supported strings: dots hearts
Default: dots
Mode
Suboptions for fv_edgeblurtv
color=<r>,<g>,<b> (default:
1.000,1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Color
Suboptions for fv_equalizer
brightness=<number> (-10.0..10.0, default:
0.0)
Brightness
contrast=<number> (-10.0..10.0, default: 0.0)
Contrast
saturation=<number> (-10.0..10.0, default: 0.0)
Saturation
hue=<number> (-180.0..180.0, default: 0.0)
Hue
Suboptions for fv_firetv
mode=<string>
Supported strings: fg light dark
Default: all
Mode
Suboptions for fv_flip
flip_h=[1|0] (default: 0)
Flip horizontally
flip_v=[1|0] (default: 0)
Flip vertically
Suboptions for fv_framerate
framerate=<string>
Supported strings: from_source user_defined 23_976 24 25 29_970 30 50 59_940 60
Default: from_source
Framerate
Output framerate. For user defined framerate, enter the timescale and frame
duration below (framerate = timescale / frame duration).
timescale=<number> (1..100000, default: 25)
Timescale
Timescale for user defined output framerate (Framerate = timescale / frame
duration).
frame_duration=<number> (1..100000, default: 1)
Frame duration
Frame duration for user defined output framerate (Framerate = timescale / frame
duration).
Suboptions for fv_pixelformat
pixelformat=<string>
Supported strings: 8 bpp gray 16 bpp gray Float gray 16 bpp gray + alpha 32 bpp
gray + alpha Float gray + alpha 15 bpp RGB 15 bpp BGR 16 bpp RGB 16 bpp BGR 24
bpp RGB 24 bpp BGR 32 bpp RGB 32 bpp BGR 32 bpp RGBA 48 bpp RGB 64 bpp RGBA
Float RGB Float RGBA YUV 422 (YUY2) YUV 422 (UYVY) YUVA 4444 (8 bit) YUVA 4444
(16 bit) YUVA 4444 (float) YUV 444 (float) YUV 420 Planar YUV 410 Planar YUV
411 Planar YUV 422 Planar YUV 422 Planar (16 bit) YUV 444 Planar YUV 444
Planar (16 bit) YUVJ 420 Planar YUVJ 422 Planar YUVJ 444 Planar
Default: YUV 420 Planar
Pixelformat
Suboptions for fv_interlace
field_order=<string>
Supported strings: top bottom
Default: top
Output field order
Suboptions for fv_invert
r=[1|0] (default: 1)
Invert red
g=[1|0] (default: 1)
Invert green
b=[1|0] (default: 1)
Invert blue
a=[1|0] (default: 1)
Invert alpha
Suboptions for fv_lenstv
x=<number> (0.00..1.00, default: 0.25)
X
y=<number> (0.00..1.00, default: 0.25)
Y
lens_width=<number> (0.00..1.00, default: 0.25)
Diameter
lens_zoom=<number> (5..200, default: 30)
Zoom
Suboptions for fv_matrixtv
mode=[1|0] (default: 0)
Blend
Suboptions for fv_halftv
mode=<string>
Supported strings: delay scratch nervous
Default: delay
Mode
direction=<string>
Supported strings: left right top bottom
Default: right
Direction
mirror=<string>
Supported strings: normal mirror copy
Default: mirror
Mirror
delay=<number> (0..31, default: 10)
Delay
Suboptions for fv_nervoustv
mode=<string>
Supported strings: random scratch
Default: random
Mode
Suboptions for fv_oldcolor
style=<string>
Supported strings: bw tech1 tech2
Default: tech1
Style
strength=<number> (0.000..1.000, default: 1.000)
Strength
r_gain=<number> (0.000..2.000, default: 1.000)
Red gain
g_gain=<number> (0.000..2.000, default: 1.000)
Green gain
b_gain=<number> (0.000..2.000, default: 1.000)
Blue gain
Suboptions for fv_optv
mode=<string>
Supported strings: maelstrom radiation perspective vertical
Default: maelstrom
Mode
speed=<number> (-64..64, default: 16)
Speed
Suboptions for fv_puptv
mode=<string>
Supported strings: horizontal vertical diagonal dissolution random raster
Default: horizontal
Mode
strength=<number> (0.00..1.00, default: 0.20)
Strength
Suboptions for fv_colormatrix_rgb
r_to_r=<number> (-2.000..2.000, default:
1.000)
Red -> Red
g_to_r=<number> (-2.000..2.000, default: 0.000)
Green -> Red
b_to_r=<number> (-2.000..2.000, default: 0.000)
Blue -> Red
a_to_r=<number> (-2.000..2.000, default: 0.000)
Alpha -> Red
off_r=<number> (-2.000..2.000, default: 0.000)
Red offset
r_to_g=<number> (-2.000..2.000, default: 0.000)
Red -> Green
g_to_g=<number> (-2.000..2.000, default: 1.000)
Green -> Green
b_to_g=<number> (-2.000..2.000, default: 0.000)
Blue -> Green
a_to_g=<number> (-2.000..2.000, default: 0.000)
Alpha -> Green
off_g=<number> (-2.000..2.000, default: 0.000)
Green offset
r_to_b=<number> (-2.000..2.000, default: 0.000)
Red -> Blue
g_to_b=<number> (-2.000..2.000, default: 0.000)
Green -> Blue
b_to_b=<number> (-2.000..2.000, default: 1.000)
Blue -> Blue
a_to_b=<number> (-2.000..2.000, default: 0.000)
Alpha -> Blue
off_b=<number> (-2.000..2.000, default: 0.000)
Blue offset
r_to_a=<number> (-2.000..2.000, default: 0.000)
Red -> Alpha
g_to_a=<number> (-2.000..2.000, default: 0.000)
Green -> Alpha
b_to_a=<number> (-2.000..2.000, default: 0.000)
Blue -> Alpha
a_to_a=<number> (-2.000..2.000, default: 1.000)
Alpha -> Alpha
off_a=<number> (-2.000..2.000, default: 0.000)
Alpha offset
force_alpha=[1|0] (default: 0)
Force alpha
Create video with alpha channel even if the input format has no alpha channel.
Use this to generate the alpha channel from other channels using the
colormatrix.
Suboptions for fv_rdstv
method=<string>
Supported strings: wall cross
Default: wall
Method
Suboptions for fv_revtv
fg_color=<r>,<g>,<b> (default:
1.000,1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Line color
bg_color=<r>,<g>,<b> (default: 0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Background
spacing=<number> (0.000..1.000, default: 0.100)
Spacing
amplitude=<number> (0.00..1.00, default: 0.10)
Amplitude
vgrabtime=<number> (1..10, default: 1)
Grab interval
Suboptions for fv_rippletv
mode=<string>
Supported strings: motion rain
Default: motion
Mode
loopnum=<number> (1..5, default: 2)
Speed
strength=<number> (1..10, default: 8)
Strength
decay_cfg=<number> (1..15, default: 8)
Decay
Suboptions for fv_rndmtv
rmode=[1|0] (default: 1)
Color
Suboptions for fv_shagadelictv
mask_r=[1|0] (default: 1)
Red mask
mask_g=[1|0] (default: 1)
Green mask
mask_b=[1|0] (default: 1)
Blue mask
Suboptions for fv_shift
shift=<number> (0..8, default: 0)
Bits to shift
Suboptions for fv_simuratv
color=<r>,<g>,<b> (default:
0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Color
mirror_mode=<string>
Supported strings: no l r d dl dr u ul ur
Default: no
Mirror mode
Suboptions for fv_sparktv
mode=<string>
Supported strings: fg light dark
Default: all
Mode
Suboptions for fv_spiraltv
mode=<string>
Supported strings: Concentric A Sawtooth Up Sawtooth Down Triangle Sinusoidal
Concentric B Lens Flat
Default: Concentric A
Mode
g_focus_interval=<number> (0..60, default: 6)
Focus interval
center_x=<number> (0.000..1.000, default: 0.500)
Center x
center_y=<number> (0.000..1.000, default: 0.500)
Center y
g_depth_shift=<number> (0..5, default: 0)
Depth shift
Suboptions for fv_tlp
factor=<number> (0.00..1.00, default: 0.50)
Strength
0 means no effect, 1 means maximum (= still image)
quality=<number> (1..5, default: 2)
Quality
Suboptions for fv_transform
tm=<string>
Supported strings: rotate affine perspective lens_effect whirl
Default: rotate
Transformation mode
Choose Transformation method. Each method can be configured in it's section.
im=<string>
Supported strings: auto nearest bilinear quadratic cubic_bspline
Default: auto
Interpolation mode
Choose interpolation method. Auto means to choose based on the conversion
quality. Nearest is fastest, Bicubic is slowest.
bg_color=<r>,<g>,<b>,<a> (default:
0.000,0.000,0.000,1.000)
<r>, <g>, <b> and <a> are in the range 0.0..1.0
Background color
rotate_angle=<number> (-360.00..360.00, default: 0.00)
Angle
affine_xx=<number> (-2.000..2.000, default: 1.000)
X -> X
affine_xy=<number> (-2.000..2.000, default: 0.000)
X -> Y
affine_yx=<number> (-2.000..2.000, default: 0.000)
Y -> X
affine_yy=<number> (-2.000..2.000, default: 1.000)
Y -> Y
affine_ox=<number> (-1.000..1.000, default: 0.000)
X Offset
Normalized X offset. 1 corresponds to image with.
affine_oy=<number> (-1.000..1.000, default: 0.000)
Y Offset
Normalized Y offset. 1 corresponds to image height.
perspective_tl=<x>,<y> (default: 0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Top left
Top left corner in normalized image coordinates
perspective_tr=<x>,<y> (default: 1.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Top right
Top right corner in normalized image coordinates
perspective_bl=<x>,<y> (default: 0.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Bottom left
Bottom left corner in normalized image coordinates
perspective_br=<x>,<y> (default: 1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Bottom right
Bottom right corner in normalized image coordinates
lens_effect_pos=<x>,<y> (default: 0.500,0.500)
<r>, <g> and <b> are in the range 0.0..1.0
Position
Center of the lens
lens_effect_diameter=<number> (0.00..1.00, default: 0.25)
Diameter
Diamater of the lens (1 is image size)
lens_effect_zoom=<number> (5.00..200.00, default: 20.00)
Zoom
Zoom factor
whirl_center=<x>,<y> (default: 0.500,0.500)
<r>, <g> and <b> are in the range 0.0..1.0
Center
whirl_radius=<number> (0.00..1.00, default: 0.50)
Radius
whirl_pinch=<number> (0.00..1.00, default: 0.50)
Pinch
whirl_angle=<number> (0.00..360.00, default: 30.00)
Angle
Suboptions for fv_transformtv
transform=<number> (0..5, default: 0)
Transformation
Suboptions for fv_tctweak
mode=<string>
Supported strings: off interpolate remove_redundant remove_all add add_first
Default: off
Mode
int_framerate=<number> (1..999, default: 25)
Integer framerate
Set the integer framerate used when adding new timecodes
drop=[1|0] (default: 0)
Drop frame
Set the if drop frame is used when adding new timecodes
hours=<number> (0..23, default: 0)
Start hour
Set the start hours used when adding new timecodes
minutes=<number> (0..59, default: 0)
Start minute
Set the start minutes used when adding new timecodes
seconds=<number> (0..59, default: 0)
Start second
Set the start seconds used when adding new timecodes
frames=<number> (0..999, default: 0)
Start frames
Set the start frames used when adding new timecodes
Suboptions for fv_vertigotv
phase_increment=<number> (0.01..1.00,
default: 0.02)
Phase increment
zoomrate=<number> (1.01..1.10, default: 1.01)
Zoom rate
Suboptions for fv_colormatrix_yuv
y_to_y=<number> (-2.000..2.000, default:
1.000)
Luminance -> Luminance
u_to_y=<number> (-2.000..2.000, default: 0.000)
Cb -> Luminance
v_to_y=<number> (-2.000..2.000, default: 0.000)
Cr -> Luminance
a_to_y=<number> (-2.000..2.000, default: 0.000)
Alpha -> Luminance
off_y=<number> (-2.000..2.000, default: 0.000)
Luminance offset
r_to_u=<number> (-2.000..2.000, default: 0.000)
Luminance -> Cb
u_to_u=<number> (-2.000..2.000, default: 1.000)
Cb -> Cb
b_to_u=<number> (-2.000..2.000, default: 0.000)
Cr -> Cb
a_to_u=<number> (-2.000..2.000, default: 0.000)
Alpha -> Cb
off_u=<number> (-2.000..2.000, default: 0.000)
Cb offset
y_to_v=<number> (-2.000..2.000, default: 0.000)
Luminance -> Cr
u_to_v=<number> (-2.000..2.000, default: 0.000)
Cb -> Cr
v_to_v=<number> (-2.000..2.000, default: 1.000)
Cr -> Cr
a_to_v=<number> (-2.000..2.000, default: 0.000)
Alpha -> Cr
off_v=<number> (-2.000..2.000, default: 0.000)
Cr offset
y_to_a=<number> (-2.000..2.000, default: 0.000)
Luminance -> Alpha
u_to_a=<number> (-2.000..2.000, default: 0.000)
Cb -> Alpha
v_to_a=<number> (-2.000..2.000, default: 0.000)
Cr -> Alpha
a_to_a=<number> (-2.000..2.000, default: 1.000)
Alpha -> Alpha
off_a=<number> (-2.000..2.000, default: 0.000)
Alpha offset
force_alpha=[1|0] (default: 0)
Force alpha
Create video with alpha channel even if the input format has no alpha channel.
Use this to generate the alpha channel from other channels using the
colormatrix.
Suboptions for fv_zoom
zoom_h=<number> (0.50..2.00, default: 1.00)
Zoom horizontally
zoom_v=<number> (0.50..2.00, default: 1.00)
Zoom vertically
sm=<string>
Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell
cubic_catmull sinc_lanczos
Default: auto
Scale mode
Choose scaling method. Auto means to choose based on the conversion quality.
Nearest is fastest, Sinc with Lanczos window is slowest.
so=<number> (4..1000, default: 4)
Scale order
Order for sinc scaling
downscale_filter=<string>
Supported strings: auto none wide gauss
Default: auto
Antialiasing for downscaling
Specifies the antialiasing filter to be used when downscaling images.
downscale_blur=<number> (0.00..2.00, default: 1.00)
Blur factor for downscaling
Specifies how much blurring should be applied when downscaling. Smaller values
can speed up scaling, but might result in strong aliasing.
quality=<number> (1..5, default: 2)
Quality
bg_color=<r>,<g>,<b>,<a> (default:
0.000,0.000,0.000,1.000)
<r>, <g>, <b> and <a> are in the range 0.0..1.0
Background color
Suboptions for bg_f0r_3 point color balance
Blackcolor=<r>,<g>,<b>
(default: 0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Black color
Black color
Graycolor=<r>,<g>,<b> (default:
0.500,0.500,0.500)
<r>, <g> and <b> are in the range 0.0..1.0
Gray color
Gray color
Whitecolor=<r>,<g>,<b> (default:
1.000,1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
White color
White color
Splitpreview=[1|0] (default: 1)
Split preview
Split privew
Sourceimageonleftside=[1|0] (default: 1)
Source image on left side
Source image on left side
Suboptions for bg_f0r_3dflippo
Xaxisrotation=<number>
(0.0000..1.0000, default: 0.5000)
X axis rotation
Rotation on the X axis
Yaxisrotation=<number> (0.0000..1.0000, default: 0.5000)
Y axis rotation
Rotation on the Y axis
Zaxisrotation=<number> (0.0000..1.0000, default: 0.5000)
Z axis rotation
Rotation on the Z axis
Xaxisrotationrate=<number> (0.0000..1.0000, default:
0.5000)
X axis rotation rate
Rotation rate on the X axis
Yaxisrotationrate=<number> (0.0000..1.0000, default:
0.5000)
Y axis rotation rate
Rotation rate on the Y axis
Zaxisrotationrate=<number> (0.0000..1.0000, default:
0.5000)
Z axis rotation rate
Rotation rate on the Z axis
Centerposition(X)=<number> (0.0000..1.0000, default: 0.0000)
Center position (X)
Position of the center of rotation on the X axis
Centerposition(Y)=<number> (0.0000..1.0000, default: 0.0000)
Center position (Y)
Position of the center of rotation on the Y axis
Invertrotationassignment=[1|0] (default: 0)
Invert rotation assignment
If true, when mapping rotation, make inverted (wrong) assignment
Don'tblankmask=[1|0] (default: 0)
Don't blank mask
Mask for frame transposition is not blanked, so a trace of old transpositions is
maintained
Fillwithimageorblack=[1|0] (default: 0)
Fill with image or black
If true, pixels that are not transposed are black, otherwise, they are copied
with the original
Suboptions for bg_f0r_Brightness
Brightness=<number> (0.0000..1.0000,
default: 0.5000)
Brightness
The brightness value
Suboptions for bg_f0r_Cartoon
triplevel=<number> (0.0000..1.0000, default:
1000.0000)
triplevel
level of trip: use high numbers, incremented by 100
diffspace=<number> (0.0000..1.0000, default: 1.0000)
diffspace
difference space: a value from 0 to 256
Suboptions for bg_f0r_Color Distance
Color=<r>,<g>,<b> (default:
0.500,0.500,0.500)
<r>, <g> and <b> are in the range 0.0..1.0
Color
The Source Color
Suboptions for bg_f0r_Contrast0r
Contrast=<number> (0.0000..1.0000, default:
0.5000)
Contrast
The contrast value
Suboptions for bg_f0r_Curves
Channel=<number> (0.0000..1.0000, default:
0.0000)
Channel
Channel to adjust levels (1 = RED; 2 = GREEN; 3 = BLUE; 4 = LUMA)
Showcurves=[1|0] (default: 1)
Show curves
Draw curve graph on output image
Graphposition=<number> (0.0000..1.0000, default: 3.0000)
Graph position
Output image corner where curve graph will be drawn (1 = TOP,LEFT; 2 =
TOP,RIGHT; 3 = BOTTOM,LEFT; 4 = BOTTOM, RIGHT)
Curvepointnumber=<number> (0.0000..1.0000, default: 2.0000)
Curve point number
Number of point to use to build curve
Point1inputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 1 input value
Point 1 input value
Point1outputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 1 output value
Point 1 output value
Point2inputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 2 input value
Point 2 input value
Point2outputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 2 output value
Point 2 output value
Point3inputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 3 input value
Point 3 input value
Point3outputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 3 output value
Point 3 output value
Point4inputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 4 input value
Point 4 input value
Point4outputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 4 output value
Point 4 output value
Point5inputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 5 input value
Point 5 input value
Point5outputvalue=<number> (0.0000..1.0000, default:
1.0000)
Point 5 output value
Point 5 output value
Suboptions for bg_f0r_Defish0r
Amount=<number> (0.0000..1.0000, default:
0.0000)
Amount
Focal Ratio
DeFish=[1|0] (default: 0)
DeFish
Fish or Defish
Type=<number> (0.0000..1.0000, default: 0.6667)
Type
Mapping function
Scaling=<number> (0.0000..1.0000, default: 0.6667)
Scaling
Scaling method
ManualScale=<number> (0.0000..1.0000, default: 0.5000)
Manual Scale
Manual Scale
Interpolator=<number> (0.0000..1.0000, default: 0.1667)
Interpolator
Quality of interpolation
Aspecttype=<number> (0.0000..1.0000, default: 0.0000)
Aspect type
Pixel aspect ratio presets
ManualAspect=<number> (0.0000..1.0000, default: 0.5000)
Manual Aspect
Manual Pixel Aspect ratio
Suboptions for bg_f0r_Distort0r
Amplitude=<number> (0.0000..1.0000, default:
1.0000)
Amplitude
The amplitude of the plasma signal
Frequency=<number> (0.0000..1.0000, default: 0.0050)
Frequency
The frequency of the plasma signal
Suboptions for bg_f0r_Edgeglow
lthresh=<number> (0.0000..1.0000, default:
0.0000)
lthresh
threshold for edge lightening
lupscale=<number> (0.0000..1.0000, default: 0.0000)
lupscale
multiplier for upscaling edge brightness
lredscale=<number> (0.0000..1.0000, default: 0.0000)
lredscale
multiplier for downscaling non-edge brightness
Suboptions for bg_f0r_Flippo
Xaxis=[1|0] (default: 0)
X axis
Flipping on the horizontal axis
Yaxis=[1|0] (default: 0)
Y axis
Flipping on the vertical axis
Suboptions for bg_f0r_Gamma
Gamma=<number> (0.0000..1.0000, default:
1.0000)
Gamma
The gamma value
Suboptions for bg_f0r_Glow
Blur=<number> (0.0000..1.0000, default:
0.0000)
Blur
Blur of the glow
Suboptions for bg_f0r_Hueshift0r
Hue=<number> (0.0000..1.0000, default:
0.0000)
Hue
The shift value
Suboptions for bg_f0r_K-Means Clustering
Num=<number> (0.0000..1.0000, default:
0.5000)
Num
The number of clusters
Distweight=<number> (0.0000..1.0000, default: 0.5000)
Dist weight
The weight on distance
Suboptions for bg_f0r_Lens Correction
xcenter=<number> (0.0000..1.0000, default:
0.5000)
xcenter
ycenter=<number> (0.0000..1.0000, default: 0.5000)
ycenter
correctionnearcenter=<number> (0.0000..1.0000, default: 0.5000)
correctionnearcenter
correctionnearedges=<number> (0.0000..1.0000, default: 0.5000)
correctionnearedges
brightness=<number> (0.0000..1.0000, default: 0.5000)
brightness
Suboptions for bg_f0r_LetterB0xed
BorderWidth=<number> (0.0000..1.0000,
default: 0.4000)
Border Width
Transparency=[1|0] (default: 0)
Transparency
Suboptions for bg_f0r_Levels
Channel=<number> (0.0000..1.0000, default:
0.0000)
Channel
Channel to adjust levels
Inputblacklevel=<number> (0.0000..1.0000, default: 0.0000)
Input black level
Input black level
Inputwhitelevel=<number> (0.0000..1.0000, default: 1.0000)
Input white level
Input white level
Gamma=<number> (0.0000..1.0000, default: 0.2500)
Gamma
Gamma
Blackoutput=<number> (0.0000..1.0000, default: 0.0000)
Black output
Black output
Whiteoutput=<number> (0.0000..1.0000, default: 1.0000)
White output
White output
Showhistogram=[1|0] (default: 1)
Show histogram
Show histogram
Histogramposition=<number> (0.0000..1.0000, default: 3.0000)
Histogram position
Histogram position
Suboptions for bg_f0r_Mask0Mate
Left=<number> (0.0000..1.0000, default:
0.2000)
Left
Right=<number> (0.0000..1.0000, default: 0.2000)
Right
Top=<number> (0.0000..1.0000, default: 0.2000)
Top
Bottom=<number> (0.0000..1.0000, default: 0.2000)
Bottom
Invert=[1|0] (default: 0)
Invert
Invert the mask, creates a hole in the frame.
Blur=<number> (0.0000..1.0000, default: 0.0000)
Blur
Blur the outline of the mask
Suboptions for bg_f0r_Perspective
TopLeft=<x>,<y> (default:
0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Top Left
TopRight=<x>,<y> (default: 1.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Top Right
BottomLeft=<x>,<y> (default: 0.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Bottom Left
BottomRight=<x>,<y> (default: 1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Bottom Right
Suboptions for bg_f0r_SOP/Sat
rSlope=<number> (0.0000..1.0000, default:
1.0000)
rSlope
Slope of the red color component
gSlope=<number> (0.0000..1.0000, default: 1.0000)
gSlope
Slope of the green color component
bSlope=<number> (0.0000..1.0000, default: 1.0000)
bSlope
Slope of the blue color component
aSlope=<number> (0.0000..1.0000, default: 1.0000)
aSlope
Slope of the alpha component
rOffset=<number> (0.0000..1.0000, default: 0.0000)
rOffset
Offset of the red color component
gOffset=<number> (0.0000..1.0000, default: 0.0000)
gOffset
Offset of the green color component
bOffset=<number> (0.0000..1.0000, default: 0.0000)
bOffset
Offset of the blue color component
aOffset=<number> (0.0000..1.0000, default: 0.0000)
aOffset
Offset of the alpha component
rPower=<number> (0.0000..1.0000, default: 1.0000)
rPower
Power (Gamma) of the red color component
gPower=<number> (0.0000..1.0000, default: 1.0000)
gPower
Power (Gamma) of the green color component
bPower=<number> (0.0000..1.0000, default: 1.0000)
bPower
Power (Gamma) of the blue color component
aPower=<number> (0.0000..1.0000, default: 1.0000)
aPower
Power (Gamma) of the alpha component
saturation=<number> (0.0000..1.0000, default: 200.0000)
saturation
Overall saturation
Suboptions for bg_f0r_Saturat0r
Saturation=<number> (0.0000..1.0000,
default: 0.0000)
Saturation
The saturation value
Suboptions for bg_f0r_Scale0Tilt
Clipleft=<number> (0.0000..1.0000,
default: 0.0000)
Clip left
Clipright=<number> (0.0000..1.0000, default: 0.0000)
Clip right
Cliptop=<number> (0.0000..1.0000, default: 0.0000)
Clip top
Clipbottom=<number> (0.0000..1.0000, default: 0.0000)
Clip bottom
ScaleX=<number> (0.0000..1.0000, default: 0.5000)
Scale X
ScaleY=<number> (0.0000..1.0000, default: 0.5000)
Scale Y
TiltX=<number> (0.0000..1.0000, default: 0.5000)
Tilt X
TiltY=<number> (0.0000..1.0000, default: 0.5000)
Tilt Y
Suboptions for bg_f0r_Squareblur
Kernelsize=<number> (0.0000..1.0000,
default: 0.0000)
Kernel size
The size of the kernel, as a proportion to its coverage of the image
Suboptions for bg_f0r_TehRoxx0r
Interval=<number> (0.0000..1.0000, default:
0.0100)
Interval
Changing speed of small blocks
Suboptions for bg_f0r_Threshold0r
Threshold=<number> (0.0000..1.0000, default:
0.0000)
Threshold
The threshold
Suboptions for bg_f0r_Tint0r
Mapblackto=<r>,<g>,<b>
(default: 0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Map black to
The color to map source color with null luminance
Mapwhiteto=<r>,<g>,<b> (default:
0.500,1.000,0.500)
<r>, <g> and <b> are in the range 0.0..1.0
Map white to
The color to map source color with full luminance
Tintamount=<number> (0.0000..1.0000, default: 0.2500)
Tint amount
Amount of color
Suboptions for bg_f0r_Transparency
Transparency=<number> (0.0000..1.0000,
default: 0.0000)
Transparency
The transparency value
Suboptions for bg_f0r_Vertigo
PhaseIncrement=<number> (0.0000..1.0000,
default: 0.0200)
PhaseIncrement
Phase increment
Zoomrate=<number> (0.0000..1.0000, default: 1.0100)
Zoomrate
Zoomrate
Suboptions for bg_f0r_Water
splash=<x>,<y> (default: 0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
splash
make a big splash in the center
physics=<number> (0.0000..1.0000, default: 0.0000)
physics
water density: from 1 to 4
rain=[1|0] (default: 0)
rain
rain drops all over
distort=[1|0] (default: 0)
distort
distort all surface like dropping a bucket to the floor
smooth=[1|0] (default: 0)
smooth
smooth up all perturbations on the surface
surfer=[1|0] (default: 0)
surfer
surf the surface with a wandering finger
swirl=[1|0] (default: 0)
swirl
swirling whirpool in the center
randomize_swirl=[1|0] (default: 0)
randomize_swirl
randomize the swirling angle
Suboptions for bg_f0r_White Balance
NeutralColor=<r>,<g>,<b>
(default: 1.000,1.000,1.000)
<r>, <g> and <b> are in the range 0.0..1.0
Neutral Color
Choose a color from the source image that should be white.
GreenTint=<number> (0.0000..1.0000, default: 1.2000)
Green Tint
Adjust the level of green.
Suboptions for bg_f0r_alpha0ps
Display=<number> (0.0000..1.0000, default:
0.0000)
Display
Displayinputalpha=[1|0] (default: 0)
Display input alpha
Operation=<number> (0.0000..1.0000, default: 0.0000)
Operation
Threshold=<number> (0.0000..1.0000, default: 0.5000)
Threshold
Shrink/growamount=<number> (0.0000..1.0000, default: 0.3333)
Shrink/grow amount
Invert=[1|0] (default: 0)
Invert
Suboptions for bg_f0r_alphagrad
Position=<number> (0.0000..1.0000, default:
0.5000)
Position
Transitionwidth=[1|0] (default: 0)
Transition width
Tilt=<number> (0.0000..1.0000, default: 0.5000)
Tilt
Min=<number> (0.0000..1.0000, default: 0.0000)
Min
Max=<number> (0.0000..1.0000, default: 1.0000)
Max
Operation=<number> (0.0000..1.0000, default: 0.0000)
Operation
Suboptions for bg_f0r_alphaspot
Shape=<number> (0.0000..1.0000, default:
0.0000)
Shape
PositionX=<number> (0.0000..1.0000, default: 0.5000)
Position X
PositionY=<number> (0.0000..1.0000, default: 0.5000)
Position Y
SizeX=<number> (0.0000..1.0000, default: 0.1000)
Size X
SizeY=<number> (0.0000..1.0000, default: 0.1000)
Size Y
Tilt=<number> (0.0000..1.0000, default: 0.5000)
Tilt
Transitionwidth=<number> (0.0000..1.0000, default: 0.2000)
Transition width
Min=<number> (0.0000..1.0000, default: 0.0000)
Min
Max=<number> (0.0000..1.0000, default: 1.0000)
Max
Operation=<number> (0.0000..1.0000, default: 0.0000)
Operation
Suboptions for bg_f0r_bluescreen0r
Color=<r>,<g>,<b> (default:
0.000,240.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Color
The color to make transparent (B G R)
Distance=<number> (0.0000..1.0000, default: 127.0000)
Distance
Distance to Color (127 is good)
Suboptions for bg_f0r_c0rners
Corner1X=<number> (0.0000..1.0000,
default: 0.3333)
Corner 1 X
X coordinate of corner 1
Corner1Y=<number> (0.0000..1.0000, default: 0.3333)
Corner 1 Y
Y coordinate of corner 1
Corner2X=<number> (0.0000..1.0000, default: 0.6667)
Corner 2 X
X coordinate of corner 2
Corner2Y=<number> (0.0000..1.0000, default: 0.3333)
Corner 2 Y
Y coordinate of corner 2
Corner3X=<number> (0.0000..1.0000, default: 0.6667)
Corner 3 X
X coordinate of corner 3
Corner3Y=<number> (0.0000..1.0000, default: 0.6667)
Corner 3 Y
Y coordinate of corner 3
Corner4X=<number> (0.0000..1.0000, default: 0.3333)
Corner 4 X
X coordinate of corner 4
Corner4Y=<number> (0.0000..1.0000, default: 0.6667)
Corner 4 Y
Y coordinate of corner 4
EnableStretch=[1|0] (default: 0)
Enable Stretch
Enable stretching
StretchX=<number> (0.0000..1.0000, default: 0.5000)
Stretch X
Amount of stretching in X direction
StretchY=<number> (0.0000..1.0000, default: 0.5000)
Stretch Y
Amount of stretching in Y direction
Interpolator=<number> (0.0000..1.0000, default: 0.1667)
Interpolator
Quality of interpolation
TransparentBackground=[1|0] (default: 0)
Transparent Background
Makes background transparent
FeatherAlpha=<number> (0.0000..1.0000, default: 0.0100)
Feather Alpha
Makes smooth transition into transparent
Suboptions for bg_f0r_coloradj_RGB
R=<number> (0.0000..1.0000, default: 0.5000)
R
Amount of red
G=<number> (0.0000..1.0000, default: 0.5000)
G
Amount of green
B=<number> (0.0000..1.0000, default: 0.5000)
B
Amount of blue
Action=<number> (0.0000..1.0000, default: 0.3333)
Action
Type of color adjustment
Keepluma=[1|0] (default: 1)
Keep luma
Don't change brightness
Alphacontrolled=[1|0] (default: 0)
Alpha controlled
Adjust only areas with nonzero alpha
Lumaformula=<number> (0.0000..1.0000, default: 0.5000)
Luma formula
Suboptions for bg_f0r_delay0r
DelayTime=<number> (0.0000..1.0000, default:
0.0000)
DelayTime
the delay time
Suboptions for bg_f0r_nosync0r
HSync=<number> (0.0000..1.0000, default:
0.0000)
HSync
the hsync offset
Suboptions for bg_f0r_pixeliz0r
BlockSizeX=<number> (0.0000..1.0000,
default: 0.4375)
BlockSizeX
Horizontal size of one "pixel"
BlockSizeY=<number> (0.0000..1.0000, default: 0.4375)
BlockSizeY
Vertical size of one "pixel"
Suboptions for bg_f0r_pr0be
Measurement=<number> (0.0000..1.0000,
default: 0.0000)
Measurement
What measurement to display
X=<number> (0.0000..1.0000, default: 0.5000)
X
X position of probe
Y=<number> (0.0000..1.0000, default: 0.5000)
Y
Y position of probe
Xsize=<number> (0.0000..1.0000, default: 0.2500)
X size
X size of probe
Ysize=<number> (0.0000..1.0000, default: 0.2500)
Y size
Y size of probe
256scale=[1|0] (default: 0)
256 scale
use 0-255 instead of 0.0-1.0
Showalpha=[1|0] (default: 0)
Show alpha
Display alpha value too
Bigwindow=[1|0] (default: 0)
Big window
Display more data
Suboptions for bg_f0r_pr0file
X=<number> (0.0000..1.0000, default: 0.5000)
X
X position of profile
Y=<number> (0.0000..1.0000, default: 0.5000)
Y
Y position of profile
Tilt=<number> (0.0000..1.0000, default: 0.5000)
Tilt
Tilt of profile
Length=<number> (0.0000..1.0000, default: 0.1584)
Length
Length of profile
Channel=<number> (0.0000..1.0000, default: 0.3750)
Channel
Channel to numerically display
Marker1=<number> (0.0000..1.0000, default: -0.2000)
Marker 1
Position of marker 1
Marker2=<number> (0.0000..1.0000, default: -0.2000)
Marker 2
Position of marker 2
Rtrace=[1|0] (default: 1)
R trace
Show R trace on scope
Gtrace=[1|0] (default: 1)
G trace
Show G trace on scope
Btrace=[1|0] (default: 1)
B trace
Show B trace on scope
Ytrace=[1|0] (default: 0)
Y trace
Show Y' trace on scope
Prtrace=[1|0] (default: 0)
Pr trace
Show Pr trace on scope
Pbtrace=[1|0] (default: 0)
Pb trace
Show Pb trace on scope
Alphatrace=[1|0] (default: 0)
Alpha trace
Show Alpha trace on scope
Displayaverage=[1|0] (default: 1)
Display average
e
DisplayRMS=[1|0] (default: 1)
Display RMS
Displayminimum=[1|0] (default: 0)
Display minimum
Displaymaximum=[1|0] (default: 0)
Display maximum
256scale=[1|0] (default: 0)
256 scale
use 0-255 instead of 0.0-1.0
Color=<number> (0.0000..1.0000, default: 0.0000)
Color
rec 601 or rec 709
Crosshaircolor=<number> (0.0000..1.0000, default: 0.0000)
Crosshair color
Color of the profile marker
Suboptions for bg_f0r_primaries
Factor=<number> (0.0000..1.0000, default:
1.0000)
Factor
influence of mean px value. > 32 = 0
Suboptions for bg_f0r_select0r
Colortoselect=<r>,<g>,<b>
(default: 0.000,0.800,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Color to select
Invertselection=[1|0] (default: 0)
Invert selection
DeltaR/A/Hue=<number> (0.0000..1.0000, default:
0.2000)
Delta R / A / Hue
DeltaG/B/Chroma=<number> (0.0000..1.0000, default:
0.2000)
Delta G / B / Chroma
DeltaB/I/I=<number> (0.0000..1.0000, default:
0.2000)
Delta B / I / I
Selectionsubspace=<number> (0.0000..1.0000, default: 0.0000)
Selection subspace
Subspaceshape=<number> (0.0000..1.0000, default: 0.0000)
Subspace shape
Edgemode=<number> (0.0000..1.0000, default: 0.0000)
Edge mode
Operation=<number> (0.0000..1.0000, default: 0.0000)
Operation
Set video monitor options
do_monitor=[1|0] (default: 1)
Enable monitor
plugin=option[{suboptions}]
Supported options: ov_x11 ov_v4l2
Default: ov_x11
Plugin
Suboptions for plugin=ov_x11
-m <metadata_options>
auto_resize=[1|0] (default: 1)
Auto resize window
disable_xscreensaver_normal=[1|0] (default: 0)
Disable Screensaver for normal playback
disable_xscreensaver_fullscreen=[1|0] (default: 1)
Disable Screensaver for fullscreen playback
force_hw_scale=[1|0] (default: 1)
Force hardware scaling
Use hardware scaling even if it involves more CPU intensive pixelformat
conversions
background_color=<r>,<g>,<b> (default:
0.000,0.000,0.000)
<r>, <g> and <b> are in the range 0.0..1.0
Background color
Specify the background color for videos with alpha channel. This is only used by
the OpenGL driver.
scale_mode=<string>
Supported strings: auto nearest bilinear quadratic cubic_bspline cubic_mitchell
cubic_catmull sinc_lanczos
Default: auto
Scale mode
Choose scaling method. Auto means to choose based on the conversion quality.
Nearest is fastest, Sinc with Lanczos window is slowest.
scale_order=<number> (4..1000, default: 4)
Scale order
Order for sinc scaling
scale_quality=<number> (1..5, default: 2)
Scale quality
Scale quality
Suboptions for plugin=ov_v4l2
device=option[{suboptions}]
Supported options: /dev/video0
Default: /dev/video0
V4L2 Device
force_rw=[1|0] (default: 1)
Force write
Don't use memory mapping
Set metadata options
metadata_mode=<string>
Supported strings: static input player
Default: static
Metadata mode
artist=<string>
Artist
title=<string>
Title
album=<string>
Album
track=<number> (default: 0)
Track
genre=<string>
Genre
author=<string>
Author
copyright=<string>
Copyright
date=<string>
Date
Complete date or year only
comment=<string>
Comment
-enc <encoding_options>
Set encoding options
encode_audio_to_video=[1|0] (default: 0)
Write audio stream to video file if possible
audio_encoder=option[{suboptions}]
Supported options: e_wav e_vorbis e_speex e_flacogg e_flac e_lame e_faac
e_mpegaudio e_ffmpeg_audio b_lame
Default: e_wav
Audio
Suboptions for audio_encoder=e_wav
-o <output_options>
write_info_chunk=[1|0] (default: 1)
Write info chunk
bits=<string>
Supported strings: 8 16 24 32
Default: 16
Bits per sample
Suboptions for audio_encoder=e_vorbis
bitrate_mode=<string>
Supported strings: vbr vbr_bitrate managed
Default: VBR
Bitrate mode
Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum
bitrate VBR (bitrate): The specified nominal bitrate will be used for
selecting the encoder mode. Managed: You specify a nominal bitrate and
(optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate
might result in a worse quality
nominal_bitrate=<number> (0..1000, default: 128)
Nominal bitrate (kbps)
Nominal bitrate (in kbps) for managed mode
quality=<number> (0.0..10.0, default: 3.0)
VBR Quality (10: best)
Quality for VBR mode 10: best (largest output file) 0: worst (smallest output
file)
min_bitrate=<number> (0..1000, default: 0)
Minimum bitrate (kbps)
Optional minimum bitrate (in kbps) 0 = unspecified
max_bitrate=<number> (0..1000, default: 0)
Maximum bitrate (kbps)
Optional maximum bitrate (in kbps) 0 = unspecified
Suboptions for audio_encoder=e_speex
mode=<string>
Supported strings: auto nb wb uwb
Default: auto
Speex mode
Encoding mode. If you select Auto, the mode will be taken from the samplerate.
quality=<number> (0..10, default: 3)
Quality (10: best)
complexity=<number> (0..10, default: 3)
Encoding complexity
nframes=<number> (1..10, default: 1)
Frames per Ogg packet
bitrate=<number> (0..128, default: 8)
Bitrate (kbps)
Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding
mode.
vbr=[1|0] (default: 0)
Variable bitrate
abr_bitrate=<number> (0..128, default: 0)
Average bitrate (kbps)
Average bitrate (in kbps). Set to 0 for disabling ABR.
vad=[1|0] (default: 0)
Use voice activity detection
dtx=[1|0] (default: 0)
Enable file-based discontinuous transmission
Suboptions for audio_encoder=e_flacogg
bits=<string>
Supported strings: 8 12 16 20 24
Default: 16
Bits
compression_level=<number> (0..8, default: 5)
Compression Level
0: Fastest encoding, biggest files 8: Slowest encoding, smallest files
Suboptions for audio_encoder=e_flac
use_vorbis_comment=[1|0] (default: 1)
Write vorbis comment
Write Vorbis comment containing metadata to the file
use_seektable=[1|0] (default: 1)
Write seek table
Write seektable (strongly recommended)
num_seektable_entries=<number> (1..1000000, default: 100)
Entries in the seektable
Maximum number of entries in the seek table. Default is 100, larger numbers
result in shorter seeking times but also in larger files.
bits=<string>
Supported strings: 8 12 16 20 24
Default: 16
Bits
compression_level=<number> (0..8, default: 5)
Compression Level
0: Fastest encoding, biggest files 8: Slowest encoding, smallest files
Suboptions for audio_encoder=e_lame
do_id3v1=[1|0] (default: 1)
Write ID3V1.1 tag
do_id3v2=[1|0] (default: 1)
Write ID3V2 tag
id3v2_charset=<string>
Supported strings: 0 1 2 3
Default: 3
ID3V2 Encoding
bitrate_mode=<string>
Supported strings: CBR ABR VBR
Default: CBR
Bitrate mode
stereo_mode=<string>
Supported strings: Stereo Joint stereo Auto
Default: Auto
Stereo mode
Stereo: Completely independent channels Joint stereo: Improve quality (save
bits) by using similarities of the channels Auto (recommended): Select one of
the above depending on quality or bitrate setting
quality=<number> (0..9, default: 2)
Encoding speed
0: Slowest encoding, best quality 9: Fastest encoding, worst quality
cbr_bitrate=<number> (8..320, default: 128)
Bitrate (kbps)
Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the
closest value.
vbr_quality=<number> (0..9, default: 4)
VBR Quality
VBR Quality level. 0: best, 9: worst
abr_bitrate=<number> (8..320, default: 128)
ABR overall bitrate (kbps)
Average bitrate for ABR mode
abr_min_bitrate=<number> (0..320, default: 0)
ABR min bitrate (kbps)
Minimum bitrate for ABR mode. 0 means let lame decide. If your selection is no
valid mp3 bitrate, we'll choose the closest value.
abr_max_bitrate=<number> (0..320, default: 0)
ABR max bitrate (kbps)
Maximum bitrate for ABR mode. 0 means let lame decide. If your selection is no
valid mp3 bitrate, we'll choose the closest value.
Suboptions for audio_encoder=e_faac
do_id3v1=[1|0] (default: 1)
Write ID3V1.1 tag
do_id3v2=[1|0] (default: 1)
Write ID3V2 tag
id3v2_charset=<string>
Supported strings: 0 1 2 3
Default: 3
ID3V2 Encoding
object_type=<string>
Supported strings: mpeg2_main mpeg2_lc mpeg4_main mpeg4_lc mpeg4_ltp
Default: mpeg4_main
Object type
bitrate=<number> (0..1000, default: 0)
Bitrate (kbps)
Average bitrate (0: VBR based on quality)
quality=<number> (10..500, default: 100)
Quality
Quantizer quality
block_types=<string>
Supported strings: Both No short No long
Default: Both
Block types
tns=[1|0] (default: 0)
Use temporal noise shaping
no_midside=[1|0] (default: 0)
Don't use mid/side coding
Suboptions for audio_encoder=e_mpegaudio
bitrate=<number> (32..448, default: 224)
Bitrate (kbps)
layer=<number> (1..2, default: 2)
Layer (1 or 2)
Audio layer
vcd=[1|0] (default: 1)
VCD Compatible
Make VCD compliant output. This forces layer II, 224 kbps and 44.1 KHz stereo
Suboptions for audio_encoder=e_ffmpeg_audio
format=<string>
Supported strings: au ac3 aiff mp2 asf
Default: au
Format
codec=option[{suboptions}]
Supported options: pcm_mulaw pcm_s16be pcm_alaw ac3 pcm_s8 mp2 wma2 wma1
Default: pcm_mulaw
Codec
Suboptions for codec=ac3
Suboptions for audio_encoder=b_lame
ff_bit_rate_str=<string>
Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320 384 448 512
576 640
Default: 128
Bit rate (kbps)
Suboptions for codec=mp2
ff_bit_rate_str=<string>
Supported strings: 32 48 56 64 80 96 112 128 160 192 224 256 320 384
Default: 128
Bit rate (kbps)
Suboptions for codec=wma2
ff_bit_rate_str=<string>
Supported strings: 24 48 64 96 128
Default: 128
Bit rate (kbps)
Suboptions for codec=wma1
ff_bit_rate_str=<string>
Supported strings: 24 48 64 96 128
Default: 128
Bit rate (kbps)
server=<string> (Default: localhost)
Server
port=<number> (1..65535, default: 8000)
Port
mount=<string> (Default: /stream.ogg)
Mount
user=<string> (Default: source)
User
password=<string>
Password
name=<string> (Default: Test stream)
Name
description=<string> (Default: Brought to you by gmerlin)
Description
stereo_mode=<string>
Supported strings: Stereo Joint stereo Auto
Default: Auto
Stereo mode
Stereo: Completely independent channels Joint stereo: Improve quality (save
bits) by using similarities of the channels Auto (recommended): Select one of
the above depending on quality or bitrate setting
quality=<number> (0..9, default: 2)
Encoding speed
0: Slowest encoding, best quality 9: Fastest encoding, worst quality
cbr_bitrate=<number> (8..320, default: 128)
Bitrate (kbps)
Bitrate in kbps. If your selection is no valid mp3 bitrate, we'll choose the
closest value.
video_encoder=option[{suboptions}]
Supported options: e_lqt e_y4m e_mpegvideo e_singlepic e_theora e_mpeg
e_ffmpeg_video e_ffmpeg b_ogg
Default: e_lqt
Video
Suboptions for video_encoder=e_lqt
format=<string>
Supported strings: quicktime avi avi_opendml mp4 m4a 3gp
Default: quicktime
Format
make_streamable=[1|0] (default: 0)
Make streamable
Make the file streamable afterwards (uses twice the diskspace)
max_riff_size=<number> (1..1024, default: 1024)
Maximum RIFF size
Maximum RIFF size (in MB) for OpenDML AVIs. The default (1GB) is reasonable and
should only be changed by people who know what they do.
codec=option[{suboptions}]
Supported options: ima4 rawaudio twos ulaw sowt alaw in24 in32 fl32 fl64 lpcm
vorbis vorbis_qt ffmpeg_mp2 ffmpeg_ac3 lame faac
Default: ima4
Codec
Suboptions for codec=in24
Suboptions for video_encoder=e_y4m
pcm_little_endian=[1|0] (default: 0)
Little endian
Suboptions for codec=in32
pcm_little_endian=[1|0] (default: 0)
Little endian
Suboptions for codec=fl32
pcm_little_endian=[1|0] (default: 0)
Little endian
Suboptions for codec=fl64
pcm_little_endian=[1|0] (default: 0)
Little endian
Suboptions for codec=lpcm
pcm_format=<string>
Supported strings: Integer (16 bit) Integer (24 bit) Integer (32 bit) Float (32
bit) Float (64 bit)
Default: Integer (16 bit)
Format
pcm_little_endian=[1|0] (default: 0)
Little endian
Suboptions for codec=vorbis
vorbis_bitrate=<number> (default: 128000)
Nominal Bitrate
vorbis_vbr=[1|0] (default: 1)
Use variable bitrate
vorbis_max_bitrate=<number> (default: -1)
Maximum Bitrate (-1 = no limit)
vorbis_min_bitrate=<number> (default: -1)
Minimum Bitrate (-1 = no limit)
Suboptions for codec=vorbis_qt
vorbis_bitrate=<number> (default: 128000)
Nominal Bitrate
vorbis_vbr=[1|0] (default: 1)
Use variable bitrate
vorbis_max_bitrate=<number> (default: -1)
Maximum Bitrate (-1 = no limit)
vorbis_min_bitrate=<number> (default: -1)
Minimum Bitrate (-1 = no limit)
Suboptions for codec=ffmpeg_mp2
bit_rate_audio=<number> (default: 128)
Bit rate (kbps)
Suboptions for codec=ffmpeg_ac3
bit_rate_audio=<number> (default: 128)
Bit rate (kbps)
Suboptions for codec=lame
mp3_bitrate_mode=<string>
Supported strings: CBR ABR VBR
Default: CBR
Bitrate mode
CBR: Constant bitrate VBR: Variable bitrate ABR: Average bitrate
mp3_bitrate=<number> (default: 256000)
Nominal Bitrate (ABR/CBR)
Bitrate in bits per second. For CBR, this must be a valid MP3 bitrate
mp3_bitrate_min=<number> (default: 64000)
Minimum Bitrate (ABR)
Minimum ABR bitrate in bits per second. This must be a valid MP3 bitrate
mp3_bitrate_max=<number> (default: 320000)
Maximum Bitrate (ABR)
Maximum ABR bitrate in bits per second. This must be a valid MP3 bitrate
mp3_quality=<number> (0..9, default: 0)
Quality (0 = best)
0: Slowest encoding, best quality 9: Fastest encoding, worst quality
mp3_quality_vbr=<number> (0..9, default: 0)
VBR Quality (0 = best)
VBR Quality level. 0: best, 9: worst
Suboptions for codec=faac
faac_bitrate=<number> (default: 0)
Bitrate (kbps, 0 = VBR)
quality=<number> (10..500, default: 100)
VBR Quality
object_type=<string>
Supported strings: Low Main SSR LTP
Default: Low
Object type
box_top=<number> (0..65535, default: 0)
Text box (top)
box_left=<number> (0..65535, default: 0)
Text box (left)
box_bottom=<number> (0..65535, default: 0)
Text box (bottom)
box_right=<number> (0..65535, default: 0)
Text box (right)
fg_color=<r>,<g>,<b>,<a> (default:
1.000,1.000,1.000,1.000)
<r>, <g>, <b> and <a> are in the range 0.0..1.0
Text color
bg_color=<r>,<g>,<b>,<a> (default:
0.000,0.000,0.000,1.000)
<r>, <g>, <b> and <a> are in the range 0.0..1.0
Background color
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
codec=option[{suboptions}]
Supported options: raw v308 v408 v410 yuv2 yuv4 yv12 2vuy v210 rtjpeg jpeg mjpa
png ffmpeg_mpg4 ffmpeg_msmpeg4v3 ffmpeg_msmpeg4v3_wmp ffmpeg_h263 ffmpeg_h263p
ffmpeg_mjpg ffmpeg_rle ffmpeg_dv ffmpeg_dvcpro ffmpeg_dv50 ffmpeg_ffvhuff
ffmpeg_ffv1 ffmpeg_dnxhd ffmpeg_imx x264 schroedinger yuvs
Default: raw
Codec
Suboptions for codec=rtjpeg
rtjpeg_quality=<number> (0..100, default:
100)
Quality setting
rtjpeg_key_rate=<number> (default: 25)
Key frame interval
rtjpeg_luma_quant=<number> (default: 1)
Luma quantiser
rtjpeg_chroma_quant=<number> (default: 1)
Chroma quantiser
Suboptions for codec=jpeg
jpeg_quality=<number> (1..100, default: 95)
Quality
jpeg_usefloat=[1|0] (default: 0)
Use float
Suboptions for codec=mjpa
jpeg_quality=<number> (1..100, default: 95)
Quality
jpeg_usefloat=[1|0] (default: 0)
Use float
Suboptions for codec=png
png_compression_level=<number> (0..9,
default: 9)
Compression Level
Suboptions for codec=ffmpeg_mpg4
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_flag_ac_pred=[1|0] (default: 0)
MPEG-4 AC prediction
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset)
if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset) ff_flag_cbp_rd=[1|0] (default: 0) CBP RD Use rate distortion optimization for cbp. This can only be used together with trellis quantization. ff_me_method=<string> Supported strings: Zero Phods Log X1 Epzs Full Default: Zero Motion estimation method ff_me_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD ME compare function Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_cmp_chroma=[1|0] (default: 0) Enable chroma ME compare ff_me_range=<number> (0..1000, default: 0) Motion estimation range Motion estimation search range (0 means unlimited) ff_me_threshold=<number> (0..4000000, default: 0) ME Theshold Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used ff_mb_decision=<string> Supported strings: Use compare function Fewest bits Rate distoration Default: Use compare function MB decision mode ff_dia_size=<number> (-9..9, default: 0) ME diamond size & shape Motion estimation diamond size. Negative means shape adaptive. ff_flag_gmc=[1|0] (default: 0) Use global motion compensation Warning: GMC is not supported by all decoders ff_flag_4mv=[1|0] (default: 0) 4 MV per MB allowed Allow 4 motion vectors per macroblock (slightly better quality). Works better if MB decision mode is "Fewest bits" or "Rate distoration". ff_flag_mv0=[1|0] (default: 0) Always try a MB with MV=<0,0> ff_flag_qp_rd=[1|0] (default: 0) QP RD Use rate distortion optimization for qp selection. Can only be used if MB decision mode is "Rate distoration" ff_pre_me=<number> (0..2, default: 0) ME pre-pass Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always ff_me_pre_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD ME pre-pass compare function Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_pre_cmp_chroma=[1|0] (default: 0) Enable chroma ME pre-pass compare ff_pre_dia_size=<number> (-9..9, default: 0) ME pre-pass diamond size & shape Motion estimation pre-pass diamond size. Negative means shape adaptive. ff_flag_qpel=[1|0] (default: 0) Use qpel MC Use 1/4 pixel motion compensation. Warning: QPEL is not supported by all decoders. ff_me_sub_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD Subpixel ME compare function Subpixel motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_sub_cmp_chroma=[1|0] (default: 0) Enable chroma subpixel ME compare ff_me_subpel_quality=<number> (1..8, default: 8) Subpel ME quality Subpel motion estimation refinement quality (for qpel). Higher values mean higher quality but slower encoding. ff_lumi_masking=<number> (0.00..1.00, default: 0.00) Luminance masking Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range. ff_dark_masking=<number> (0.00..1.00, default: 0.00) Darkness masking Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range. ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00) Temporary complexity masking Encode very fast moving image parts with reduced quality. 0 means disabled. ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00) Spatial complexity masking Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range. ff_border_masking=<number> (0.00..1.00, default: 0.00) Border masking Encode image parts near the border with reduced quality.0 means disabled ff_p_masking=<number> (0.00..1.00, default: 0.00) Inter block masking Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks. ff_flag_normalize_aqp=[1|0] (default: 0) Normalize adaptive quantization When using masking, try to adjust the per macroblock quantizers to maintain the desired average ff_strict_std_compliance=<number> (-2..2, default: 0) Standards compliance 2 = Strictly conform to a older more strict version of the spec or reference software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default
-1: Allow unofficial extensions
-2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
Suboptions for codec=ffmpeg_msmpeg4v3
if < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset) ff_flag_cbp_rd=[1|0] (default: 0) CBP RD Use rate distortion optimization for cbp. This can only be used together with trellis quantization. ff_me_method=<string> Supported strings: Zero Phods Log X1 Epzs Full Default: Zero Motion estimation method ff_me_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD ME compare function Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_cmp_chroma=[1|0] (default: 0) Enable chroma ME compare ff_me_range=<number> (0..1000, default: 0) Motion estimation range Motion estimation search range (0 means unlimited) ff_me_threshold=<number> (0..4000000, default: 0) ME Theshold Motion estimation threshold. under which no motion estimation is performed, but instead the user specified motion vectors are used ff_mb_decision=<string> Supported strings: Use compare function Fewest bits Rate distoration Default: Use compare function MB decision mode ff_dia_size=<number> (-9..9, default: 0) ME diamond size & shape Motion estimation diamond size. Negative means shape adaptive. ff_flag_gmc=[1|0] (default: 0) Use global motion compensation Warning: GMC is not supported by all decoders ff_flag_4mv=[1|0] (default: 0) 4 MV per MB allowed Allow 4 motion vectors per macroblock (slightly better quality). Works better if MB decision mode is "Fewest bits" or "Rate distoration". ff_flag_mv0=[1|0] (default: 0) Always try a MB with MV=<0,0> ff_flag_qp_rd=[1|0] (default: 0) QP RD Use rate distortion optimization for qp selection. Can only be used if MB decision mode is "Rate distoration" ff_pre_me=<number> (0..2, default: 0) ME pre-pass Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always ff_me_pre_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD ME pre-pass compare function Motion estimation pre-pass compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_pre_cmp_chroma=[1|0] (default: 0) Enable chroma ME pre-pass compare ff_pre_dia_size=<number> (-9..9, default: 0) ME pre-pass diamond size & shape Motion estimation pre-pass diamond size. Negative means shape adaptive. ff_flag_qpel=[1|0] (default: 0) Use qpel MC Use 1/4 pixel motion compensation. Warning: QPEL is not supported by all decoders. ff_me_sub_cmp=<string> Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE Default: SAD Subpixel ME compare function Subpixel motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of squared quantization errors (low quality) BIT: Number of bits needed for the block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of squared differences ff_me_sub_cmp_chroma=[1|0] (default: 0) Enable chroma subpixel ME compare ff_me_subpel_quality=<number> (1..8, default: 8) Subpel ME quality Subpel motion estimation refinement quality (for qpel). Higher values mean higher quality but slower encoding. ff_lumi_masking=<number> (0.00..1.00, default: 0.00) Luminance masking Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range. ff_dark_masking=<number> (0.00..1.00, default: 0.00) Darkness masking Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a sane range. ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00) Temporary complexity masking Encode very fast moving image parts with reduced quality. 0 means disabled. ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00) Spatial complexity masking Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is a sane range. ff_border_masking=<number> (0.00..1.00, default: 0.00) Border masking Encode image parts near the border with reduced quality.0 means disabled ff_p_masking=<number> (0.00..1.00, default: 0.00) Inter block masking Encode inter blocks with reduced quality (increases the quality of intra blocks). 0 means disabled, 1 will double the bits allocated for intra blocks. ff_flag_normalize_aqp=[1|0] (default: 0) Normalize adaptive quantization When using masking, try to adjust the per macroblock quantizers to maintain the desired average ff_strict_std_compliance=<number> (-2..2, default: 0) Standards compliance 2 = Strictly conform to a older more strict version of the spec or reference software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default
-1: Allow unofficial extensions
-2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality.0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2 = Strictly conform to a older more strict version of the spec or reference
software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
Suboptions for codec=ffmpeg_msmpeg4v3_wmp
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality.0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2 = Strictly conform to a older more strict version of the spec or reference
software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
Suboptions for codec=ffmpeg_h263
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_flag_4mv=[1|0] (default: 0)
4 MV per MB allowed
Allow 4 motion vectors per macroblock (slightly better quality). Works better if
MB decision mode is "Fewest bits" or "Rate distoration".
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality.0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2 = Strictly conform to a older more strict version of the spec or reference
software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch ff_flag_obmc=[1|0] (default: 0) OBMC Overlapped block motion compensation (only supported with simple MB decision)
Suboptions for codec=ffmpeg_h263p
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch ff_flag_obmc=[1|0] (default: 0) OBMC Overlapped block motion compensation (only supported with simple MB decision)
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function. SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_flag_4mv=[1|0] (default: 0)
4 MV per MB allowed
Allow 4 motion vectors per macroblock (slightly better quality). Works better if
MB decision mode is "Fewest bits" or "Rate distoration".
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality.0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2 = Strictly conform to a older more strict version of the spec or reference
software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch ff_flag_h263p_aiv=[1|0] (default: 0) Alternative inter vlc ff_flag_obmc=[1|0] (default: 0) OBMC Overlapped block motion compensation (only supported with simple MB decision)
Suboptions for codec=ffmpeg_mjpg
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch ff_flag_h263p_aiv=[1|0] (default: 0) Alternative inter vlc ff_flag_obmc=[1|0] (default: 0) OBMC Overlapped block motion compensation (only supported with simple MB decision)
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality.0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2 = Strictly conform to a older more strict version of the spec or reference
software
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
Suboptions for codec=ffmpeg_ffv1
1: Strictly conform to all the things in the spec no matter what consequences
0: Default -1: Allow unofficial extensions -2: Allow non standarized experimental things ff_noise_reduction=<number> (0..2000, default: 0) Noise reduction ff_flag_gray=[1|0] (default: 0) Grayscale mode ff_flag_bitexact=[1|0] (default: 0) Use only bitexact stuff Use only bitexact stuff (except (i)dct) ff_thread_count=<number> (default: 1) Number of threads to launch Spcify how many threads to launch
ff_coder_type=<string>
Supported strings: VLC Arithmetic
Default: VLC
Coder type
Suboptions for codec=ffmpeg_imx
imx_bitrate=<string>
Supported strings: 30 40 50
Default: 50
Bitrate (Mbps)
imx_strip_vbi=<number> (default: 1)
Strip VBI
Suboptions for codec=x264
x264_i_keyint_max=<number> (default: 250)
Maximum GOP size
x264_i_keyint_min=<number> (default: 25)
Minimum GOP size
x264_i_scenecut_threshold=<number> (default: 40)
Scenecut threshold
How aggressively to insert extra I-frames
x264_i_bframe=<number> (0..16, default: 0)
B-Frames
Number of B-frames between I and P
x264_i_bframe_adaptive=<string>
Supported strings: None Fast Trellis
Default: Fast
Adaptive B-frame decision
x264_i_bframe_bias=<number> (-90..100, default: 0)
B-frame bias
Influences how often B-frames are used
x264_i_bframe_pyramid=<string>
Supported strings: None Strict Normal
Default: Normal
B-frame pyramid
Keep some B-frames as references
x264_i_rc_method=<string>
Supported strings: Constant quality CRF based VBR Average bitrate
Default: CRF based VBR
Ratecontrol method
Ratecontrol method: Constant quality: Specify a quantizer parameter below CRF
based VBR: Specify a rate factor below Average bitrate: Specify a bitrate
below Selecting 2-pass encoding will force Average bitrate.
x264_i_bitrate=<number> (default: 0)
Bitrate
Bitrate in kbit/s. 0 means VBR (recommended)
x264_f_rate_tolerance=<number> (0.0..100.0, default: 1.0)
Bitrate tolerance
Allowed variance of average bitrate
x264_i_vbv_max_bitrate=<number> (default: 0)
Maximum local bitrate
Sets a maximum local bitrate in kbits/s.
x264_i_vbv_buffer_size=<number> (default: 0)
VBV Buffer size
Averaging period for the maximum local bitrate. Measured in kbits.
x264_f_vbv_buffer_init=<number> (0.00..1.00, default: 0.90)
Initial VBV buffer occupancy
Sets the initial VBV buffer occupancy as a fraction of the buffer size.
x264_b_psy=[1|0] (default: 1)
Psy optimizations
Psychovisual optimization
x264_f_psy_rd=<number> (0.00..10.00, default: 1.00)
Psy RD strength
Strength of psychovisual optimization: RD (requires Partition decision >= 6)
x264_f_psy_trellis=<number> (0.00..10.00, default: 0.00)
Psy trellis strength
Strength of psychovisual optimization (requires trellis)
x264_b_mb_tree=[1|0] (default: 1)
Macroblock-tree ratecontrol
x264_i_lookahead=<number> (0..250, default: 40)
Lookahead
Number of frames for frametype lookahead
x264_f_rf_constant=<number> (0..51, default: 23)
Nominal Quantizer parameter
This selects the nominal quantizer to use (1 to 51). Lower values result in
better fidelity, but higher bitrates. 26 is a good default value. 0 means
lossless.
x264_i_qp_constant=<number> (0..51, default: 23)
Quantizer parameter
This selects the quantizer to use (1 to 51). Lower values result in better
fidelity, but higher bitrates. 26 is a good default value. 0 means lossless.
x264_i_qp_min=<number> (0..51, default: 10)
Minimum quantizer parameter
Minimum quantizer parameter
x264_i_qp_max=<number> (0..51, default: 51)
Maximum quantizer parameter
Maximum quantizer parameter
x264_i_qp_step=<number> (1..50, default: 4)
Maximum QP step
Maximum quantizer step
x264_f_ip_factor=<number> (default: 1.40)
QP factor between I and P
x264_f_pb_factor=<number> (default: 1.30)
QP factor between P and B
x264_i_aq_mode=<string>
Supported strings: None Variance AQ (complexity mask) Autovariance AQ
(experimental)
Default: Variance AQ (complexity mask)
Adaptive quantization
x264_f_aq_strength=<number> (0.50..1.50, default: 1.00)
AQ strength
Adaptive quantization strength: Reduces blocking and blurring in flat and
textured areas
x264_f_qcompress=<number> (0.00..1.00, default: 0.60)
QP curve compression
Only for 2-pass encoding
x264_f_qblur=<number> (default: 0.50)
QP Reduce fluctuations in QP (after curve compression)
Only for 2-pass encoding
x264_f_complexity_blur=<number> (default: 20.00)
Temporally blur complexity
Only for 2-pass encoding
x264_i_chroma_qp_offset=<number> (default: 0)
QP difference between chroma and luma
x264_i_luma_deadzone_0=<number> (default: 21)
Inter luma quantization deadzone
x264_i_luma_deadzone_1=<number> (default: 11)
Intra luma quantization deadzone
x264_analyse_8x8_transform=[1|0] (default: 0)
8x8 transform
x264_analyse_psub16x16=[1|0] (default: 1)
8x16, 16x8 and 8x8 P-frame search
x264_analyse_bsub16x16=[1|0] (default: 1)
8x16, 16x8 and 8x8 B-frame search
x264_analyse_psub8x8=[1|0] (default: 0)
4x8, 8x4 and 4x4 P-frame search
x264_analyse_i8x8=[1|0] (default: 1)
8x8 Intra search
8x8 Intra search requires 8x8 transform
x264_analyse_i4x4=[1|0] (default: 1)
4x4 Intra search
x264_i_me_method=<string>
Supported strings: Diamond search Hexagonal search Uneven Multi-Hexagon
Exhaustive search Hadamard exhaustive search (slow)
Default: Hexagonal search
Method
Motion estimation method Diamond search: fastest Hexagonal search: default
setting Uneven Multi-Hexagon: better but slower Exhaustive search: extremely
slow, primarily for testing
x264_i_subpel_refine=<number> (1..9, default: 7)
Partition decision
Subpixel motion estimation and partition decision quality: 1=fast, 9=best.
x264_i_me_range=<number> (default: 16)
Search range
Maximum distance to search for motion estimation, measured from predicted
position(s). Default of 16 is good for most footage, high motion sequences may
benefit from settings between 24-32.
x264_i_frame_reference=<number> (1..16, default: 1)
Max Ref. frames
This is effective in Anime, but seems to make little difference in live-action
source material. Some decoders are unable to deal with large frameref values.
x264_b_chroma_me=[1|0] (default: 1)
Chroma motion estimation
x264_b_mixed_references=[1|0] (default: 1)
Mixed references
Allow each MB partition in P-frames to have it's own reference number
x264_b_weighted_bipred=[1|0] (default: 0)
Weighted biprediction
Implicit weighting for B-frames
x264_i_weighted_pred=<string>
Supported strings: Disabled Blind offset Smart analysis
Default: Smart analysis
Weighted prediction for P-frames
x264_i_direct_mv_pred=<string>
Supported strings: None Spatial Temporal Auto
Default: Spatial
Direct MV prediction mode
x264_b_deblocking_filter=[1|0] (default: 1)
Deblocking filter
Use deblocking loop filter (increases quality).
x264_i_deblocking_filter_alphac0=<number> (-6..6, default: 0)
Deblocking filter strength
Loop filter AlphaC0 parameter
x264_i_deblocking_filter_beta=<number> (-6..6, default: 0)
Deblocking filter threshold
Loop filter Beta parameter
x264_b_cabac=[1|0] (default: 1)
Enable CABAC
Enable CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows down
encoding and decoding, but should save 10-15% bitrate.
x264_i_trellis=<string>
Supported strings: Disabled Enabled (final) Enabled (always)
Default: Enabled (final)
Trellis RD quantization
Trellis RD quantization. Requires CABAC. Can be enabled either for the final
encode of a MB or for all mode desisions
x264_i_noise_reduction=<number> (0..65536, default: 0)
Noise reduction
x264_i_threads=<number> (default: 1)
Threads
Number of threads
x264_b_fast_pskip=[1|0] (default: 1)
early SKIP detection on P-frames
x264_b_dct_decimate=[1|0] (default: 1)
Transform coefficient thresholding on P-frames
Suboptions for codec=schroedinger
enc_rate_control=<string>
Supported strings: Constant noise threshold Constant bitrate Low delay Lossless
Constant lambda Constant error Constant quality
Default: Constant quality
Rate control
enc_bitrate=<number> (default: 13824000)
Bitrate
enc_buffer_size=<number> (default: 0)
Buffer size
enc_buffer_level=<number> (default: 0)
Buffer level
enc_noise_threshold=<number> (0.00..100.00, default: 25.00)
Noise Threshold
enc_quality=<number> (0.00..10.00, default: 5.00)
Quality
enc_enable_rdo_cbr=[1|0] (default: 1)
rdo cbr
enc_gop_structure=<string>
Supported strings: Adaptive Intra only Backref Chained backref Biref Chained
biref
Default: Adaptive
GOP Stucture
enc_au_distance=<number> (default: 30)
GOP size
enc_open_gop=[1|0] (default: 1)
Open GOPs
Choose whether GOPs should be open or closed. Closed GOPs improve seeking
accuracy for buggy decoders, open GOPs have a slightly better compression
enc_mv_precision=<number> (default: 0)
MV Precision
enc_motion_block_size=<string>
Supported strings: Automatic Small Medium Large
Default: Automatic
Block size
enc_motion_block_overlap=<string>
Supported strings: Automatic None Partial Full
Default: Automatic
Block overlap
enc_enable_chroma_me=[1|0] (default: 0)
Enable chroma ME
enc_enable_global_motion=[1|0] (default: 0)
Enable GMC
Enable global motion estimation
enc_enable_phasecorr_estimation=[1|0] (default: 0)
Enable phasecorrelation estimation
enc_enable_hierarchical_estimation=[1|0] (default: 1)
Hierarchical estimation
enc_enable_phasecorr_estimation=[1|0] (default: 0)
Phasecorr estimation
enc_enable_bigblock_estimation=[1|0] (default: 1)
Bigblock estimation
enc_enable_global_motion=[1|0] (default: 0)
Global motion estimation
enc_enable_deep_estimation=[1|0] (default: 1)
Deep estimation
enc_enable_scene_change_detection=[1|0] (default: 1)
Scene change detection
enc_intra_wavelet=<string>
Supported strings: Deslauriers-Debuc (9,3) LeGall (5,3) Deslauriers-Debuc (13,5)
Haar (no shift) Haar (single shift) Fidelity Daubechies (9,7)
Default: Deslauriers-Debuc (9,3)
Intra wavelet
enc_inter_wavelet=<string>
Supported strings: Deslauriers-Debuc (9,3) LeGall (5,3) Deslauriers-Debuc (13,5)
Haar (no shift) Haar (single shift) Fidelity Daubechies (9,7)
Default: LeGall (5,3)
Inter wavelet
enc_filtering=<string>
Supported strings: None Center weighted median Gaussian Add noise Adaptive
Gaussian
Default: None
Filter
enc_filter_value=<number> (0..100, default: 5)
Filter value
enc_force_profile=<string>
Supported strings: Auto VC-2 low delay VC-2 simple VC-2 main Main
Default: Auto
Force profile
enc_codeblock_size=<string>
Supported strings: Auto Small Medium Large Full
Default: Auto
Codeblock size
enc_enable_multiquant=[1|0] (default: 1)
Enable multiquant
enc_enable_dc_multiquant=[1|0] (default: 0)
Enable DC multiquant
enc_enable_noarith=[1|0] (default: 0)
Disable arithmetic coding
enc_downsample_levels=<number> (2..8, default: 5)
Downsample levels
enc_transform_depth=<number> (0..6, default: 3)
Transform depth
chroma_mode=<string>
Supported strings: auto 420jpeg 420mpeg2 420paldv 444 422 411 mono yuva4444
Default: auto
Chroma mode
Set the chroma mode of the output file. Auto means to take the format most
similar to the source.
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
Suboptions for video_encoder=e_mpegvideo
format=<string>
Supported strings: mpeg1 mpeg2 vcd svcd dvd
Default: mpeg1
Format
Sets the MPEG flavour. Note, that for VCD, SVCD and DVD, you MUST provide valid
frame sizes
bitrate_mode=<string>
Supported strings: auto vbr cbr
Default: auto
Bitrate Mode
Specify constant or variable bitrate. For "Auto", constant bitrate
will be used for MPEG-1, variable bitrate will be used for MPEG-2. For
formats, which require CBR, this option is ignored
bitrate=<number> (200..99999, default: 1150)
Bitrate (kbps)
Video bitrate in kbps. For VBR, it's the maximum bitrate. If the format requires
a fixed bitrate (e.g. VCD) this option is ignored
quantization=<number> (1..31, default: 8)
Quantization
Minimum quantization for VBR. Lower numbers mean higher quality. For CBR, this
option is ignored.
quant_matrix=<string>
Supported strings: default kvcd tmpgenc hi-res
Default: default
Quantization matrices
bframes=<number> (0..2, default: 0)
Number of B-Frames
Specify the number of B-frames between 2 P/I frames. More B-frames slow down
encoding and increase memory usage, but might give better compression results.
For VCD, this option is ignored, since the VCD standard requires 2 B-frames,
no matter if you like them or not.
user_options=<string>
User options
Enter further commandline options for mpeg2enc here. Check the mpeg2enc manual
page for details
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
Suboptions for video_encoder=e_singlepic
plugin=option[{suboptions}]
Supported options: iw_jpeg iw_png iw_tiff iw_tga iw_bmp iw_pnm iw_gavl
Default: iw_jpeg
Plugin
Suboptions for plugin=iw_jpeg
Suboptions for video_encoder=e_theora
quality=<number> (0..100, default: 95)
Quality
chroma_sampling=<string>
Supported strings: 4:2:0 4:2:2 4:4:4
Default: 4:2:0
Chroma sampling
Suboptions for plugin=iw_png
compression=<number> (0..9, default: 9)
Compression level
bit_mode=<string>
Supported strings: Auto 8 16
Default: 8
Bits per channel
If you select auto, the depth will be chosen according to the input format
Suboptions for plugin=iw_tiff
compression=<string>
Supported strings: none packbits deflate jpeg
Default: none
Compression
jpeg_quality=<number> (0..100, default: 75)
JPEG quality
zip_quality=<number> (0..9, default: 6)
Deflate compression level
Suboptions for plugin=iw_tga
rle=[1|0] (default: 0)
Do RLE compression
Suboptions for plugin=iw_pnm
format=<string>
Supported strings: binary ascii
Default: binary
Format
comment=<string> (Default: Created with gmerlin)
Comment
Comment which will be written in front of every file
frame_digits=<number> (1..9, default: 4)
Framenumber digits
frame_offset=<number> (0..1000000, default: 0)
Framenumber offsetcodec=option[{suboptions}]
Supported options: vorbis speex flacogg
Default: vorbis
Codec
Suboptions for codec=vorbis
Suboptions for video_encoder=e_mpeg
bitrate_mode=<string>
Supported strings: vbr vbr_bitrate managed
Default: VBR
Bitrate mode
Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum
bitrate VBR (bitrate): The specified nominal bitrate will be used for
selecting the encoder mode. Managed: You specify a nominal bitrate and
(optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate
might result in a worse quality
nominal_bitrate=<number> (0..1000, default: 128)
Nominal bitrate (kbps)
Nominal bitrate (in kbps) for managed mode
quality=<number> (0.0..10.0, default: 3.0)
VBR Quality (10: best)
Quality for VBR mode 10: best (largest output file) 0: worst (smallest output
file)
min_bitrate=<number> (0..1000, default: 0)
Minimum bitrate (kbps)
Optional minimum bitrate (in kbps) 0 = unspecified
max_bitrate=<number> (0..1000, default: 0)
Maximum bitrate (kbps)
Optional maximum bitrate (in kbps) 0 = unspecified
Suboptions for codec=speex
mode=<string>
Supported strings: auto nb wb uwb
Default: auto
Speex mode
Encoding mode. If you select Auto, the mode will be taken from the samplerate.
quality=<number> (0..10, default: 3)
Quality (10: best)
complexity=<number> (0..10, default: 3)
Encoding complexity
nframes=<number> (1..10, default: 1)
Frames per Ogg packet
bitrate=<number> (0..128, default: 8)
Bitrate (kbps)
Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding
mode.
vbr=[1|0] (default: 0)
Variable bitrate
abr_bitrate=<number> (0..128, default: 0)
Average bitrate (kbps)
Average bitrate (in kbps). Set to 0 for disabling ABR.
vad=[1|0] (default: 0)
Use voice activity detection
dtx=[1|0] (default: 0)
Enable file-based discontinuous transmission
Suboptions for codec=flacogg
bits=<string>
Supported strings: 8 12 16 20 24
Default: 16
Bits
compression_level=<number> (0..8, default: 5)
Compression Level
0: Fastest encoding, biggest files 8: Slowest encoding, smallest files
cbr=[1|0] (default: 0)
Use constant bitrate
For constant bitrate, choose a target bitrate. For variable bitrate, choose a
nominal quality.
target_bitrate=<number> (45..2000, default: 250)
Target bitrate (kbps)
quality=<number> (0..63, default: 10)
Nominal quality
Quality for VBR mode 63: best (largest output file) 0: worst (smallest output
file)
max_keyframe_interval=<number> (1..1000, default: 64)
Maximum keyframe interval
drop_frames=[1|0] (default: 1)
Enable frame dropping
Drop frames to keep within bitrate buffer constraints. This can have a severe
impact on quality, but is the only way to ensure that bitrate targets are met
at low rates during sudden bursts of activity.
cap_overflow=[1|0] (default: 1)
Don't bank excess bits for later use
Ignore bitrate buffer overflows. If the encoder uses so few bits that the
reservoir of available bits overflows, ignore the excess. The encoder will not
try to use these extra bits in future frames. At high rates this may cause the
result to be undersized, but allows a client to play the stream using a finite
buffer; it should normally be enabled.
cap_underflow=[1|0] (default: 0)
Don't try to make up shortfalls later
Ignore bitrate buffer underflows. If the encoder uses so many bits that the
reservoir of available bits underflows, ignore the deficit. The encoder will
not try to make up these extra bits in future frames. At low rates this may
cause the result to be oversized; it should normally be disabled.
speed=<number> (0.00..1.00, default: 0.00)
Encoding speed
Higher speed levels favor quicker encoding over better quality per bit.
Depending on the encoding mode, and the internal algorithms used, quality may
actually improve, but in this case bitrate will also likely increase. In any
case, overall rate/distortion performance will probably decrease.
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
format=<string>
Supported strings: mpeg1 vcd mpeg2 svcd dvd_nav dvd
Default: mpeg1
Format
Output format. Note that for some output formats (e.g. VCD), you MUST use proper
settings for the audio and video streams also, since this isn't done
automatically
tmp_dir=<string>
Directory for temporary files
Leave empty to use the same directory as the final output file
aux_stream_1=<string>
Additional stream 1
Additional stream to multiplex into the final output file. Use this if you want
e.g. create mp3 or AC3 audio with some other encoder
aux_stream_2=<string>
Additional stream 2
Additional stream to multiplex into the final output file. Use this if you want
e.g. create mp3 or AC3 audio with some other encoder
aux_stream_3=<string>
Additional stream 3
Additional stream to multiplex into the final output file. Use this if you want
e.g. create mp3 or AC3 audio with some other encoder
bitrate=<number> (32..448, default: 224)
Bitrate (kbps)
layer=<number> (1..2, default: 2)
Layer (1 or 2)
Audio layer
vcd=[1|0] (default: 1)
VCD Compatible
Make VCD compliant output. This forces layer II, 224 kbps and 44.1 KHz stereo
format=<string>
Supported strings: mpeg1 mpeg2 vcd svcd dvd
Default: mpeg1
Format
Sets the MPEG flavour. Note, that for VCD, SVCD and DVD, you MUST provide valid
frame sizes
bitrate_mode=<string>
Supported strings: auto vbr cbr
Default: auto
Bitrate Mode
Specify constant or variable bitrate. For "Auto", constant bitrate
will be used for MPEG-1, variable bitrate will be used for MPEG-2. For
formats, which require CBR, this option is ignored
bitrate=<number> (200..99999, default: 1150)
Bitrate (kbps)
Video bitrate in kbps. For VBR, it's the maximum bitrate. If the format requires
a fixed bitrate (e.g. VCD) this option is ignored
quantization=<number> (1..31, default: 8)
Quantization
Minimum quantization for VBR. Lower numbers mean higher quality. For CBR, this
option is ignored.
quant_matrix=<string>
Supported strings: default kvcd tmpgenc hi-res
Default: default
Quantization matrices
bframes=<number> (0..2, default: 0)
Number of B-Frames
Specify the number of B-frames between 2 P/I frames. More B-frames slow down
encoding and increase memory usage, but might give better compression results.
For VCD, this option is ignored, since the VCD standard requires 2 B-frames,
no matter if you like them or not.
user_options=<string>
User options
Enter further commandline options for mpeg2enc here. Check the mpeg2enc manual
page for details
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
Suboptions for video_encoder=e_ffmpeg_video
format=<string>
Supported strings: mpeg1video mpeg2video
Default: mpeg1video
Format
codec=option[{suboptions}]
Supported options: mpeg1video mpeg2video
Default: mpeg1video
Codec
Suboptions for codec=mpeg1video
Suboptions for video_encoder=e_ffmpeg
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=mpeg2video
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
format=<string>
Supported strings: avi mpeg vob dvd flv asf mpegts
Default: avi
Format
codec=option[{suboptions}]
Supported options: pcm_s16le pcm_u8 pcm_alaw pcm_mulaw mp3 mp2 ac3 wma2 wma1
Default: pcm_s16le
Codec
Suboptions for codec=mp3
Suboptions for video_encoder=b_ogg
ff_bit_rate_str=<string>
Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320
Default: 128
Bit rate (kbps)
Suboptions for codec=mp2
ff_bit_rate_str=<string>
Supported strings: 32 48 56 64 80 96 112 128 160 192 224 256 320 384
Default: 128
Bit rate (kbps)
Suboptions for codec=ac3
ff_bit_rate_str=<string>
Supported strings: 32 40 48 56 64 80 96 112 128 160 192 224 256 320 384 448 512
576 640
Default: 128
Bit rate (kbps)
Suboptions for codec=wma2
ff_bit_rate_str=<string>
Supported strings: 24 48 64 96 128
Default: 128
Bit rate (kbps)
Suboptions for codec=wma1
ff_bit_rate_str=<string>
Supported strings: 24 48 64 96 128
Default: 128
Bit rate (kbps)
codec=option[{suboptions}]
Supported options: mpeg4 msmpeg4v3 mjpeg mpeg1video mpeg2video flv1 wmv1
Default: mpeg4
Codec
Suboptions for codec=mpeg4
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_flag_ac_pred=[1|0] (default: 0)
MPEG-4 AC prediction
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_flag_cbp_rd=[1|0] (default: 0)
CBP RD
Use rate distortion optimization for cbp
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_flag_gmc=[1|0] (default: 0)
Use global motion compensation
Warning: GMC is not supported by all decoders
ff_flag_4mv=[1|0] (default: 0)
4 MV per MB allowed
Allow 4 motion vectors per macroblock (slightly better quality). Works better if
MB decision mode is "Fewest bits" or "Rate distoration".
ff_flag_mv0=[1|0] (default: 0)
Always try a MB with MV=<0,0>
ff_flag_qp_rd=[1|0] (default: 0)
QP RD
Use rate distortion optimization for qp selection
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_flag_qpel=[1|0] (default: 0)
Use qpel MC
Use 1/4 pixel motion compensation. Warning: QPEL is not supported by all
decoders.
ff_me_sub_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
Subpixel ME compare function
Subpixel motion estimation compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_sub_cmp_chroma=[1|0] (default: 0)
Enable chroma subpixel ME compare
ff_me_subpel_quality=<number> (1..8, default: 8)
Subpel ME quality
Subpel motion estimation refinement quality (for qpel). Higher values mean
higher quality but slower encoding.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=msmpeg4v3
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=mjpeg
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=mpeg1video
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=mpeg2video
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_max_b_frames=<number> (0..16, default: 0)
Max B-Frames
Maximum number of B-frames between non B-frames
ff_b_frame_strategy=[1|0] (default: 0)
Avoid B-frames in high motion scenes
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_b_quant_factor=<number> (-31.00..31.00, default: 1.25)
B quantizer factor
Quantizer factor between B-frames and non-B-frames
ff_b_quant_offset=<number> (0.00..31.00, default: 1.25)
B quantizer offset
Quantizer offset between B-frames and non-B-frames if > 0 then the last p
frame quantizer will be used (q= lastp_q*factor+offset) if < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=flv1
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
Suboptions for codec=wmv1
gop_size=<number> (0..300, default: 250)
GOP size (0 = intra only)
ff_scenechange_threshold=<number> (-1000000000..1000000000,
default: 0)
Scenechange threshold
Threshold for scene change detection. Negative values mean more sensitivity
(more keyframes)
ff_scenechange_factor=<number> (default: 0)
Scenechange factor
Multiplied by qscale for each frame and added to scene_change_score
ff_flag_closed_gop=[1|0] (default: 0)
Close all GOPs
ff_flag2_strict_gop=[1|0] (default: 0)
Strictly enforce GOP size
ff_bit_rate_video=<number> (default: 800)
Bit rate (kbps)
ff_bit_rate_tolerance=<number> (default: 8000)
Bitrate tolerance (kbps)
Number of bits the bitstream is allowed to diverge from the reference. Unused
for constant quantizer encoding
ff_rc_min_rate=<number> (default: 0)
Minimum bitrate (kbps)
Minimum bitrate (0 means arbitrary)
ff_rc_max_rate=<number> (default: 0)
Maximum bitrate (kbps)
Maximum bitrate (0 means arbitrary)
ff_rc_buffer_size=<number> (default: 0)
RC buffer size
Decoder bitstream buffer size in kbits. When encoding with max and/or min
bitrate, this must be specified.
ff_rc_initial_cplx=<number> (0.0..99.0, default: 0.0)
Initial RC complexity
ff_rc_initial_buffer_occupancy=<number> (default: 0)
Initial RC buffer occupancy
Number of kilobits which should be loaded into the rc buffer before encoding
starts. Must not be larger than RC buffer size
ff_qmin=<number> (0..31, default: 2)
Minimum quantizer scale
ff_qmax=<number> (0..31, default: 31)
Maximum quantizer scale
ff_max_qdiff=<number> (0..31, default: 3)
Maximum quantizer difference
Maximum quantizer difference between frames
ff_flag_qscale=[1|0] (default: 0)
Use fixed quantizer
Use fixed quality encoding
ff_qscale=<number> (1..31, default: 10)
Fixed quantizer
Quantizer for fixed quality encoding. Lower means better, 1 is not recommended
ff_qcompress=<number> (0.00..1.00, default: 0.50)
Quantizer compression
Amount of qscale change between easy & hard scenes
ff_qblur=<number> (0.00..1.00, default: 0.00)
Quantizer blur
Amount of qscale smoothing over time
ff_quantizer_noise_shaping=<number> (0..3, default: 0)
Quantizer noise shaping
Choose quantization such that noise will be masked by similar-frequency content
in the image
ff_trellis=[1|0] (default: 0)
Use trellis quantization
Use trellis quantization (improves quality)
ff_i_quant_factor=<number> (-31.0..31.0, default: -0.8)
I quantizer factor
Quantizer factor between P-frames and I-frames. If > 0 then the last P frame
quantizer will be used (q= lastp_q*factor+offset). If < 0 then normal
ratecontrol will be done (q= -normal_q*factor+offset)
ff_i_quant_offset=<number> (0.0..31.0, default: 0.0)
I quantizer offset
Quantizer offset between P-frames and I-frames
ff_me_method=<string>
Supported strings: Zero Phods Log X1 Epzs Full
Default: Zero
Motion estimation method
ff_me_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME compare function
Motion estimation compare function.SAD: Sum of absolute differences SSE: Sum of
squared errors SATD: Sum of absolute Hadamard transformed differences DCT: Sum
of absolute DCT transformed differences PSNR: Sum of squared quantization
errors (low quality) BIT: Number of bits needed for the block RD: Rate
distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute vertical differences
VSSE: Sum of squared vertical differences NSSE: Noise preserving sum of
squared differences
ff_me_cmp_chroma=[1|0] (default: 0)
Enable chroma ME compare
ff_me_range=<number> (0..1000, default: 0)
Motion estimation range
Motion estimation search range (0 means unlimited)
ff_me_threshold=<number> (0..4000000, default: 0)
ME Theshold
Motion estimation threshold. under which no motion estimation is performed, but
instead the user specified motion vectors are used
ff_mb_decision=<string>
Supported strings: Use compare function Fewest bits Rate distoration
Default: Use compare function
MB decision mode
ff_dia_size=<number> (-9..9, default: 0)
ME diamond size & shape
Motion estimation diamond size. Negative means shape adaptive.
ff_pre_me=<number> (0..2, default: 0)
ME pre-pass
Motion estimation pre-pass 0: disabled 1: only after I-frames 2: always
ff_me_pre_cmp=<string>
Supported strings: SAD SSE SATD DCT PSNR BIT RD ZERO VSAD VSSE NSSE
Default: SAD
ME pre-pass compare function
Motion estimation pre-pass compare function. SAD: Sum of absolute differences
SSE: Sum of squared errors SATD: Sum of absolute Hadamard transformed
differences DCT: Sum of absolute DCT transformed differences PSNR: Sum of
squared quantization errors (low quality) BIT: Number of bits needed for the
block RD: Rate distortion optimal (slow) ZERO: 0 VSAD: Sum of absolute
vertical differences VSSE: Sum of squared vertical differences NSSE: Noise
preserving sum of squared differences
ff_me_pre_cmp_chroma=[1|0] (default: 0)
Enable chroma ME pre-pass compare
ff_pre_dia_size=<number> (-9..9, default: 0)
ME pre-pass diamond size & shape
Motion estimation pre-pass diamond size. Negative means shape adaptive.
ff_lumi_masking=<number> (0.00..1.00, default: 0.00)
Luminance masking
Encode very bright image parts with reduced quality. 0 means disabled, 0-0.3 is
a sane range.
ff_dark_masking=<number> (0.00..1.00, default: 0.00)
Darkness masking
Encode very dark image parts with reduced quality. 0 means disabled, 0-0.3 is a
sane range.
ff_temporal_cplx_masking=<number> (0.00..1.00, default: 0.00)
Temporary complexity masking
Encode very fast moving image parts with reduced quality. 0 means disabled.
ff_spatial_cplx_masking=<number> (0.00..1.00, default: 0.00)
Spatial complexity masking
Encode very complex image parts with reduced quality. 0 means disabled, 0-0.5 is
a sane range.
ff_border_masking=<number> (0.00..1.00, default: 0.00)
Border masking
Encode image parts near the border with reduced quality. 0 means disabled
ff_p_masking=<number> (0.00..1.00, default: 0.00)
Inter block masking
Encode inter blocks with reduced quality (increases the quality of intra
blocks). 0 means disabled, 1 will double the bits allocated for intra blocks.
ff_flag_normalize_aqp=[1|0] (default: 0)
Normalize adaptive quantization
When using masking, try to adjust the per macroblock quantizers to maintain the
desired average
ff_strict_std_compliance=<number> (-2..2, default: 0)
Standards compliance
2: Strictly conform to a older more strict version of the spec or reference
software 1: Strictly conform to all the things in the spec no matter what
consequences 0: Default -1: Allow unofficial extensions -2: Allow non
standarized experimental things
ff_noise_reduction=<number> (0..2000, default: 0)
Noise reduction
ff_flag_gray=[1|0] (default: 0)
Grayscale mode
ff_flag_bitexact=[1|0] (default: 0)
Use only bitexact stuff
Use only bitexact stuff (except (i)dct)
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
server=<string> (Default: localhost)
Server
port=<number> (1..65535, default: 8000)
Port
mount=<string> (Default: /stream.ogg)
Mount
user=<string> (Default: source)
User
password=<string>
Password
name=<string> (Default: Test stream)
Name
description=<string> (Default: Brought to you by gmerlin)
Description
codec=option[{suboptions}]
Supported options: vorbis speex
Default: vorbis
Codec
Suboptions for codec=vorbis
bitrate_mode=<string>
Supported strings: vbr vbr_bitrate managed
Default: VBR
Bitrate mode
Bitrate mode: VBR: You specify a quality and (optionally) a minimum and maximum
bitrate VBR (bitrate): The specified nominal bitrate will be used for
selecting the encoder mode. Managed: You specify a nominal bitrate and
(optionally) a minimum and maximum bitrate VBR is recommended, managed bitrate
might result in a worse quality
nominal_bitrate=<number> (0..1000, default: 128)
Nominal bitrate (kbps)
Nominal bitrate (in kbps) for managed mode
quality=<number> (0.0..10.0, default: 3.0)
VBR Quality (10: best)
Quality for VBR mode 10: best (largest output file) 0: worst (smallest output
file)
min_bitrate=<number> (0..1000, default: 0)
Minimum bitrate (kbps)
Optional minimum bitrate (in kbps) 0 = unspecified
max_bitrate=<number> (0..1000, default: 0)
Maximum bitrate (kbps)
Optional maximum bitrate (in kbps) 0 = unspecified
Suboptions for codec=speex
mode=<string>
Supported strings: auto nb wb uwb
Default: auto
Speex mode
Encoding mode. If you select Auto, the mode will be taken from the samplerate.
quality=<number> (0..10, default: 3)
Quality (10: best)
complexity=<number> (0..10, default: 3)
Encoding complexity
nframes=<number> (1..10, default: 1)
Frames per Ogg packet
bitrate=<number> (0..128, default: 8)
Bitrate (kbps)
Bitrate (in kbps). Set to 0 for seleting the standard bitrates for the encoding
mode.
vbr=[1|0] (default: 0)
Variable bitrate
abr_bitrate=<number> (0..128, default: 0)
Average bitrate (kbps)
Average bitrate (in kbps). Set to 0 for disabling ABR.
vad=[1|0] (default: 0)
Use voice activity detection
dtx=[1|0] (default: 0)
Enable file-based discontinuous transmission
cbr=[1|0] (default: 0)
Use constant bitrate
For constant bitrate, choose a target bitrate. For variable bitrate, choose a
nominal quality.
target_bitrate=<number> (45..2000, default: 250)
Target bitrate (kbps)
quality=<number> (0..63, default: 10)
Nominal quality
Quality for VBR mode 63: best (largest output file) 0: worst (smallest output
file)
max_keyframe_interval=<number> (1..1000, default: 64)
Maximum keyframe interval
drop_frames=[1|0] (default: 1)
Enable frame dropping
Drop frames to keep within bitrate buffer constraints. This can have a severe
impact on quality, but is the only way to ensure that bitrate targets are met
at low rates during sudden bursts of activity.
cap_overflow=[1|0] (default: 1)
Don't bank excess bits for later use
Ignore bitrate buffer overflows. If the encoder uses so few bits that the
reservoir of available bits overflows, ignore the excess. The encoder will not
try to use these extra bits in future frames. At high rates this may cause the
result to be undersized, but allows a client to play the stream using a finite
buffer; it should normally be enabled.
cap_underflow=[1|0] (default: 0)
Don't try to make up shortfalls later
Ignore bitrate buffer underflows. If the encoder uses so many bits that the
reservoir of available bits underflows, ignore the deficit. The encoder will
not try to make up these extra bits in future frames. At low rates this may
cause the result to be oversized; it should normally be disabled.
speed=<number> (0.00..1.00, default: 0.00)
Encoding speed
Higher speed levels favor quicker encoding over better quality per bit.
Depending on the encoding mode, and the internal algorithms used, quality may
actually improve, but in this case bitrate will also likely increase. In any
case, overall rate/distortion performance will probably decrease.
default_timescale=<number> (default: 25)
Default timescale
For formats, which support only constant framerates, set the default timescale
here
default_frame_duration=<number> (default: 1)
Default frame duration
For formats, which support only constant framerates, set the default frame
duration here
Set output options
output_directory=<string> (Default: .)
Output directory
output_filename_mask=<string> (Default: %Y-%m-%d-%H-%M-%S)
Output filename mask
Extension is appended by the plugin For the date and time formatting, consult
the documentation of the strftime(3) function
snapshot_directory=<string> (Default: .)
Snapshot directory
snapshot_filename_mask=<string> (Default: shot_%5n)
Snapshot filename mask
Extension is appended by the plugin %t Inserts time %d Inserts date %<i>n
Inserts Frame number with <i> digits
-r
Record to file
-syslog <name>
Set log messages to syslog
GENERIC OPTIONS¶
The following generic options are available for all gmerlin applications -helpPrint this help message and exit
-help-man
Print this help message as a manual page and exit
-help-texi
Print this help message in texinfo format and exit
-version
Print version info and exit
FILES¶
~/.gmerlin/plugins.xmlCache of the plugin registry (shared by all
applicatons)
~/.gmerlin/generic/config.xml
Default plugin parameters are read from there. Use
gmerlin_plugincfg to change them.
| March 2012 | Gmerlin |