NAME¶
trm
—
Tekram TRM-S1040 ASIC based PCI SCSI host adapter
driver
SYNOPSIS¶
To compile this driver into the kernel, place the following lines in your kernel
configuration file:
device scbus
device trm
Alternatively, to load the driver as a module at boot time, place the following
line in
loader.conf(5):
DESCRIPTION¶
The
trm
driver supports PCI SCSI host
adapters based on the Tekram TRM-S1040 SCSI ASIC.
HARDWARE¶
SCSI controllers supported by the
trm
driver
include:
- Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI
connector
- Tekram DC-315U PCI Ultra SCSI adapter without BIOS
- Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin
external SCSI connector
- Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
- Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
- Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS
For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use
the
sym(4) driver.
SEE ALSO¶
cd(4),
ch(4),
da(4),
intro(4),
sa(4),
scsi(4),
sym(4)
http://www.tekram.com/
AUTHORS¶
The
trm
driver was originally written for
FreeBSD 3.0/i386 by
Erich
Chen of Tekram Technology, and ported to
FreeBSD
5.0 by
Olivier Houchard
⟨cognet@FreeBSD.org⟩.