NAME¶
dvbv5-scan - DVBv5 tool for frequency scanning
SYNOPSIS¶
dvbv5-scan [
OPTION]...
initial-file
DESCRIPTION¶
dvbv5-scan is a command line frequency scanning tool for digital TV services
that is compliant with version 5 of the DVB API, and backward compatible with
the older v3 DVB API.
dvbv5-scan uses by default the new channel/service file format that it is
capable of supporting all types of Digital TV standards. It can also support
the legacy format used by the legacy dvb-apps.
A single physical channel (also called as transponder) may have several virtual
channels inside it, encapsulated via a MPEG Transport stream.
Those virtual channels are called as 'service' at the MPEG-TS terminology, and
may have one or more audio, video and other types of elements inside it.
The dvbv5-scan goal is to scan for a list of physical channels/transponders and
identify there the MPEG-TS services available.
The dvbv5-scan tool is smart enough to retrieve the information at the MPEG-TS
Network Information Table (NIT) about other channels available on the stream.
OPTIONS¶
- The following options are valid:
- -3, --dvbv3
- Force dvbv5-scan to use DVBv3 only.
- -a, --adapter=adapter#
- Use the given adapter. Default value: 0.
- -d, --demux=demux#
- Use the given demux. Default value: 0.
- -f, --frontend=frontend#
- Use the given frontend. Default value: 0.
- -F, --file-freqs-only
- Don't use the other frequencies discovered during scan. By default,
dvbv5-scan will find new transponder/physical channels and add them at the
internal frequency table it uses for scan. This option disables such
feature.
- -G, --get_frontend
- Use data from get_frontend on the output file. By default, dvbv5-scan will
repeat the same network parameters as found at the scan file. This should
work fine if the output file will be used by the same frontend. However,
if you intend to use the generated file on another frontend, or wants a
faster tuner, this option can be used to store the actual detected
parameters, instead of the ones that came from the source channel
file.
- -I, --input-format=format
- Format of the input file. Please notice that caps is ignored. It can
be:
- channel - for dvb-apps compatible channel file;
zap - for dvb-apps compatible zap file;
dvbv5 (default) - for the dvbv5 apps format.
- -l, --lnbf=LNBf_type
- Type of LNBf to use 'help' lists the available ones.
- -N, --nit
- Use data from NIT table on the output file. By default, dvbv5-scan will
repeat the same network parameters as found at the scan file. This should
work fine if the output file will be used by the same frontend. However,
if you intend to use the generated file on another frontend, or wants a
faster tuner, this option can be used to store the parameters that are
announced by the broadcaster via the MPEG-TS Network Information Table
(NIT), instead of the ones that came from the source channel file.
- -o, --output=file
- output filename (default: dvb_channel.conf)
- -O, --output-format=format
- Output format:
- channel - for dvb-apps compatible channel file;
zap - for dvb-apps compatible zap file;
vdr - for vdr compatible zap file;
dvbv5 (default) - for the dvbv5 apps format.
- -p, --parse-other-nit
- Parse the other NIT/SDT tables that could be found mainly on some DVB-C
carriers.
- -S, --sat_number=satellite_number
- Satellite number. Used only on satellite delivery systems. If not
specified, disable DISEqC satellite switch.
- -T, --timeout-multiply=factor
- Multiply the scan lock wait time and MPEG-TS table parsing by this
factor.
- -U, --freq_bpf=frequency
- SCR/Unicable band-pass filter frequency to use, in kHz. Used only on
satellite delivery systems.
- -v, --verbose
- Be (very) verbose. Useful to check if the MPEG-TS is happenning fine. This
option can be used multiple times to increase verbosity.
- -w, --lna=LNA
- Enable, disable or put LNA power in auto mode. Not all frontends support
it. Valid values are:
-
0 - disable
-
1 - enable
- -1 - auto
- -W, --wait=time
- Adds additional wait time for DISEqC command completion.
- -?, --help
- Outputs the usage help.
- --usage
- Gives a short usage message.
- -V, --version
- Prints the program version.
Mandatory or optional arguments to long options are also mandatory or optional
for any corresponding short options.
NOTE¶
If both
--nit and
--get_frontend options are used at the same
time, the
--nit parameters will be applied after the ones that the
frontend detected.
EXIT STATUS¶
On success, it returns 0.
EXAMPLE¶
$ dvbv5-scan /usr/share/dvbv5/dvb-c/the-brownfox
Scanning frequency #1 573000000
Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 0 postBER= 3.14x10^-3 PER= 0
Service The, provider (null): digital television
Service Quick, provider BrownFox: digital television
Service Brown, provider (null): digital television
Service Jumps, provider (null): digital television
…
Service Dog, provider (null): digital television
New transponder/channel found: #2: 579000000
…
New transponder/channel found: #39: 507000000
The scan process will then scan the other 38 discovered new transponders, and
generate a dvb_channel.com with several entries with will have not only the
physical channel/transponder info, but also the Service ID, and the
corresponding audio/video/other program IDs (PID), like:
[Quick]
SERVICE_ID = 5
VIDEO_PID = 288
AUDIO_PID = 289
FREQUENCY = 573000000
MODULATION = QAM/256
INVERSION = OFF
SYMBOL_RATE = 5247500
INNER_FEC = NONE
DELIVERY_SYSTEM = DVBC/ANNEX_A
BUGS¶
Report bugs to
Linux Media Mailing List
<linux-media@vger.kernel.org>
COPYRIGHT¶
Copyright (c) 2011-2014 by Mauro Carvalho Chehab.
License GPLv2: GNU GPL version 2 <
http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO
WARRANTY, to the extent permitted by law.