KMO_MULTI_RECONSTRUCT(7)

kmos recipes

KMO_MULTI_RECONSTRUCT(7)

NAME¶

kmo_multi_reconstruct - Reconstruct and combine obj/sky-pairs in one step.

SYNOPSIS¶

esorex kmo_multi_reconstruct [OPTIONS] FILE.sof

DESCRIPTION¶

Ideally at least two data frames have to be provided since we need for each IFU pointing to an object as well a sky frame for the same IFU.

If an OH spectrum is given in the SOF file the lambda axis will be corrected using the OH lines as reference.

All IFUs with the same object name will be reconstructed and combined in one step Telluric correction is only supported if the objects have been observed with the same IFU on all exposures (dithering).

The number of created files depends on the number of objects of different name.

If the user just wants to combine a certain object, the parameters --name or --ifus can be used.

Exposures taken with the templates KMOS_spec_obs_mapping8 and KMOS_spec_obs_mapping24 can´t be processed with this recipe! Use kmo_sci_red instead.

BASIC PARAMETERS¶

--imethod The interpolation method used for reconstruction.

--name --ifus Since an object can be present only once per exposure and since it can be located in different IFUs for the existing exposures, there are two modes to identify the objects:
* Combine by object names (default)
In this case the object name must be provided via the --name parameter. The
object name will be searched for in all primary headers of all provided
frames in the keyword ESO OCS ARMx NAME.

* Combine by index (advanced)
In this case the --ifus parameter must be provided. The parameter must have
the same number of entries as frames are provided, e.g. "3;1;24" for 3
exposures. The index doesn´t reference the extension in the frame but the
real index of the IFU as defined in the EXTNAME keyword.

(e.g. ´IFU.3.DATA´)

ADVANCED PARAMETERS¶

--flux Specify if flux conservation should be applied.

--background Specify if background removal should be applied.

--suppress_extension If set to TRUE, the arbitrary filename extensions are supressed. If multiple products with the same category are produced, they will be numered consecutively starting from 0.

--obj_sky_table The automatic obj-sky-associations can be modified by indicating a file with the desired associations. Therefore the file written to disk by default (without setting this option) can be edited manually. The formatting must absolutely be retained, just the type codes (´O´ and´S´) and the associated frame indices should be altered

Advanced reconstruction parameters
---------------------------------- --neighborhoodRange Defines the range to search for neighbors during reconstruction

--b_samples The number of samples in spectral direction for the reconstructed cube.

Ideally this number should be greater than 2048, the detector size.

--b_start --b_end Used to define manually the start and end wavelength for the reconstructed cube. By default the internally defined values are used.

--pix_scale Change the pixel scale [arcsec]. Default of 0.2" results into cubes of 14x14pix, a scale of 0.1" results into cubes of 28x28pix, etc.

--no_subtract If set to TRUE, the found objects and references won´t be sky subtracted. Additionally all IFUs will be reconstructed, even the ones containing skies.

--xcal_interpolation If true interpolate the pixel position in the slitlet (xcal) using the two closest rotator angles in the calibration file. Otherwise take the values of the closest rotator angle

Advanced combining parameters
---------------------------------- --method There are following sources to get the shift parameters from:
* ´header´ (default)
The shifts are calculated according to the WCS information stored in the
header of every IFU. The output frame will get larger, except the object is
at the exact same position for all exposures. The size of the exposures can
differ, but the orientation must be the same for all exposures.

* ´none´
The cubes are directly recombined, not shifting at all. The output frame
will have the same dimensions as the input cubes.

If the size differs a warning will be emitted and the cubes will be aligned
to the lower left corner. If the orientation differs a warning will be
emitted, but the cubes are combined anyway.

* ´center´
The shifts are calculated using a centering algorithm. The cube will be
collapsed and a 2D profile will be fitted to it to identify the centre.

With the parameter --fmethod the function to fit can be provided. The size
of the exposures can differ, but the orientation must be the same for all
exposures.

* ´user´
Read the shifts from a user specified file. The path of the file must be
provided using the --filename parameter. For every exposure (except the
first one) two shift values are expected per line, they have to be separa-
ted with simple spaces. The values indicate pixel shifts and are referenced
to the first frame. The 1st value is the shift in x-direction to the left,
the 2nd the shift in y-direction upwards. The size of the exposures can
differ, but the orientation must be the same for all exposures.

--fmethod see --method=´center´ The type of function that should be fitted spatially to the collapsed image.

This fit is used to create a mask to extract the spectrum of the object. Valid values are ´gauss´ and ´moffat´.

--filename see --method=´user´

--cmethod Following methods of frame combination are available:
* ´ksigma´ (Default)
An iterative sigma clipping. For each position all pixels in the spectrum
are examined. If they deviate significantly, they will be rejected according
to the conditions:
val > mean + stdev * cpos_rej
and
val < mean - stdev * cneg_rej
where --cpos_rej, --cneg_rej and --citer are the corresponding configuration
parameters. In the first iteration median and percentile level are used.

* ´median´
At each pixel position the median is calculated.

* ´average´
At each pixel position the average is calculated.

* ´sum´
At each pixel position the sum is calculated.

* ´min_max´
The specified number of minimum and maximum pixel values will be rejected.

--cmax and --cmin apply to this method.

--cpos_rej --cneg_rej --citer see --cmethod=´ksigma´

--cmax --cmin see --cmethod=´min_max´

Input files:

DO KMOS
category Type Explanation Required #Frames
-------- ----- ----------- -------- -------
SCIENCE RAW The science frames Y >=1
XCAL F2D x calibration frame Y 1
YCAL F2D y calibration frame Y 1
LCAL F2D Wavelength calib. frame Y 1
MASTER_FLAT F2D Master flat Y 0,1
WAVE_BAND F2L Table with start-/end-wavelengths Y 1
TELLURIC F1I normalised telluric spectrum N 0,1
OH_SPEC F1S Vector holding OH lines N 0,1

Output files:

DO KMOS
category Type Explanation
-------- ----- -----------
CUBE_MULTI F3I Combined cubes with noise

OPTIONS¶

--imethod <str>: Method to use for interpolation during reconstruction. ["NN" (nearest neighbour), "lwNN" (linear weighted nearest neighbor), "swNN" (square weighted nearest neighbor), "MS" (Modified Shepard´s method) (str; default: ´MS´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.imethod [default = MS].

--method <str>: The shifting method: ´none´: no shifting, combined directly, ´header´: shift according to WCS (default), ´center´: centering algorithm, ´user´: read shifts from file (str; default: ´header´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.method [default = header].

--fmethod <str>: The fitting method (applies only when method=´center´): ´gauss´: fit a gauss function to collapsed image (default), ´moffat´: fit a moffat function to collapsed image (str; default: ´gauss´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.fmethod [default = gauss].

--name <str>: Name of the object to combine. (str; default: ´´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.name [default = ].

--ifus <str>: The indices of the IFUs to combine. "ifu1;ifu2;..." (str; default: ´´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.ifus [default = ].

--pix_scale <float>: Change the pixel scale [arcsec]. Default of 0.2" results into cubes of 14x14pix, a scale of 0.1" results into cubes of 28x28pix, etc. (float; default: 0.2). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.pix_scale [default = 0.2].

--suppress_extension <bool>: Suppress arbitrary filename extension.(TRUE (apply) or FALSE (don´t apply) (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.suppress_extension [default = False].

--neighborhoodRange <float>: Defines the range to search for neighbors in pixels (float; default: 1.001). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.neighborhoodRange [default = 1.001].

--filename <str>: The path to the file with the shift vectors.(Applies only to method=´user´) (str; default: ´´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.filename [default = ].

--flux <bool>: TRUE: Apply flux conservation. FALSE: otherwise (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.flux [default = False].

--background <bool>: TRUE: Apply background removal. FALSE: otherwise (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.background [default = False].

--xcal_interpolation <bool>: TRUE: Interpolate xcal between rotator angles. FALSE: otherwise (bool; default: True). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.xcal_interpolation [default = True].

--no_subtract <bool>: Don´t sky subtract object and references.(TRUE (apply) or FALSE (don´t apply) (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.no_subtract [default = False].

--dev_cal <bool>: Development only: If calibration data is to be reconstructed the ALPHA/DELTA keywords are missing. Setting this parameter to TRUE prevents according data check (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.dev_cal [default = False].

--obj_sky_table <str>: The path to the file with the modified obj/sky associations. (str; default: ´´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.obj_sky_table [default = ].

--b_samples <long>: The number of samples in wavelength for the reconstructed cube (long; default: 2048). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.b_samples [default = 2048].

--b_start <float>: The lowest wavelength [um] to use when reconstructing. Derived by default, depending on the band (float; default: -1.0). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.b_start [default = -1.0].

--b_end <float>: The highest wavelength [um] to use when reconstructing. Derived by default, depending on the band (float; default: -1.0). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.b_end [default = -1.0].

--cmethod <str>: Apply "average", "median", "sum", "min_max." or "ksigma". (str; default: ´ksigma´). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.cmethod [default = ksigma].

--cpos_rej <float>: The positive rejection threshold for kappa-sigma-clipping (sigma). (float; default: 3.0). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.cpos_rej [default = 3.0].

--cneg_rej <float>: The negative rejection threshold for kappa-sigma-clipping (sigma). (float; default: 3.0). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.cneg_rej [default = 3.0].

--citer <long>: The number of iterations for kappa-sigma-clipping. (long; default: 3). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.citer [default = 3].

--cmax <long>: The number of maximum pixel values to clip with min/max-clipping. (long; default: 1). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.cmax [default = 1].

--cmin <long>: The number of minimum pixel values to clip with min/max-clipping. (long; default: 1). The full name of this option for the EsoRex configuration file is kmos.kmo_multi_reconstruct.cmin [default = 1].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

VERSION¶

kmo_multi_reconstruct 1.3.5

AUTHOR¶

Alex Agudo Berbel <usd-help@eso.org>

BUG REPORTS¶

Please report any problems to usd-help@eso.org. Alternatively, you may send a report to the ESO User Support Department <usd-help@eso.org>.

LICENSE¶

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

1.3.5

kmo_multi_reconstruct

Source file:	kmo_multi_reconstruct.7.en.gz (from cpl-plugin-kmos-doc 1.3.5+dfsg-1)
Source last updated:	2014-09-09T13:10:35Z
Converted to HTML:	2018-08-09T23:13:34Z