NAME¶
les, bus - ATM LAN Emulation service demons
SYNOPSIS¶
les [
-d module] [
-m module]
[
-f configuration_file]
bus [
-d module] [
-m module]
[
-f configuration_file]
DESCRIPTION¶
LE Service consists of three components: LAN Emulation Configuration Server (
lecs(8)), LAN Emulation Server (
les) and Broadcast and Unknown
Server (
bus).
Les performs the control coordination function for the emulated LAN. LE
clients register MAC addresses and/or route descriptors they represent to
les, and later query it when they want to resolve MAC addresses/route
descriptors into ATM addresses. Other LE control messages which are to be
distributed to every client in ELAN are also sent to
les.
Les
forwards these messages using Control Distribute VCC which it has set up to
every client in ELAN.
Bus handles data sent by clients to broadcast and multicast MAC addresses
and some of the data directed to unicast addresses. LE Client has a
possibility to send data directed to some unicast address to the
bus
before target's ATM address has been resolved and the Data Direct VCC has been
established.
Configuration file example for
les and
bus:
[main]
memdebug=True
debug=True
[load]
#memdebug=True
#debug=True
[conn]
debug=True
#S1, LE Server's ATM address
#S1=:47:00:23:00:00:00:03:00:00:01:00:02:01:00:20:ea:00:05:aa:00
S1=:47:00:23:00:00:00:03:03:00:01:00:02:01:00:20:ea:00:0a:e9:01
#S2, LAN Type
S2="802.3"
#S3, Maximum Frame Size
S3=1516
#S4, Join Timeout, s
S4=15
#S5, Maximum Frame Age, s
S5=6
#S6, BUS Atm address
S6=:47:00:23:00:00:00:03:03:00:01:00:02:01:00:20:ea:00:0a:e9:02 #viulu
#S6=0,0,170
#ELANNAME="asdf"
The configuration file contains each modules name in brackets followed by
variable definitions for that module. The definitions are of form
variable=value, where value can be either an integer, a truth value
(True/False), a string enclosed in double quotes
("string")
or an ATM address in hexadecimal format. Variables that can be set are the
debug/memdebug for each module and variables S1-S6 as defined in LE
specification.
S1=Address of the LES. This address is used in ATM
signalling.
S2=Type of the emulated LAN. Valid values is "802.3".
S3=Maximum frame size. Valid value is 1516.
S4=Join Timeout. Time in seconds which LES waits for
LE_JOIN_REQUEST before tearing down a connection.
S5=Maximum frame Age. Currently not used.
S6=Address of the BUS. This address is used in ATM signalling.
ELANNAME= Name of the emulated LAN
SIGHUP causes restart of the server. All resources are released and
server is started.
SIGUSR1 causes the server to dump its internal
state.
SIGUSR2 shuts down the server (hopefully) gracefully.
OPTIONS¶
- -d module
- Set debugging messages on for a module. "All" sets debugging on
for all modules.
- -m module
- Set memory debugging messages on for a module. "All" sets
debugging on for all modules.
- -f configuration_file
- Use the specified configuration file instead of .lanevars.
FILES¶
- .lanevars
- configuration file
BUGS¶
Servers don't establish point-to-multipoint connections to LE clients as the
specification states, which means that some LE clients won't work with these
servers.
Supports only IEEE 802.3 / Ethernet type of ELANs.
This manual page is confusing.
AUTHOR¶
Marko Kiiskila, TUT <carnil@cs.tut.fi>
SEE ALSO¶
lecs(8),
atmsigd(8),
zeppelin(8)