'\" t .TH "SYSTEMD\-RUN" "1" "" "systemd 230" "systemd-run" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" systemd-run \- Run programs in transient scope or service or timer units .SH "SYNOPSIS" .HP \w'\fBsystemd\-run\fR\ 'u \fBsystemd\-run\fR [OPTIONS...] \fICOMMAND\fR\ [ARGS...] .HP \w'\fBsystemd\-run\fR\ 'u \fBsystemd\-run\fR [OPTIONS...] [TIMER\ OPTIONS...] {\fICOMMAND\fR} [ARGS...] .SH "DESCRIPTION" .PP \fBsystemd\-run\fR may be used to create and start a transient \&.service or \&.scope unit and run the specified \fICOMMAND\fR in it\&. It may also be used to create and start transient \&.timer units\&. .PP If a command is run as transient service unit, it will be started and managed by the service manager like any other service, and thus shows up in the output of \fBsystemctl list\-units\fR like any other unit\&. It will run in a clean and detached execution environment, with the service manager as its parent process\&. In this mode, \fBsystemd\-run\fR will start the service asynchronously in the background and return after the command has begun execution\&. .PP If a command is run as transient scope unit, it will be started by \fBsystemd\-run\fR itself as parent process and will thus inherit the execution environment of the caller\&. However, the processes of the command are managed by the service manager similar to normal services, and will show up in the output of \fBsystemctl list\-units\fR\&. Execution in this case is synchronous, and will return only when the command finishes\&. This mode is enabled via the \fB\-\-scope\fR switch (see below)\&. .PP If a command is run with timer options such as \fB\-\-on\-calendar=\fR (see below), a transient timer unit is created alongside the service unit for the specified command\&. Only the transient timer unit is started immediately, the transient service unit will be started when the transient timer elapses\&. If the \fB\-\-unit=\fR is specified, the \fICOMMAND\fR may be omitted\&. In this case, \fBsystemd\-run\fR only creates a \&.timer unit that invokes the specified unit when elapsing\&. .SH "OPTIONS" .PP The following options are understood: .PP \fB\-\-no\-ask\-password\fR .RS 4 Do not query the user for authentication for privileged operations\&. .RE .PP \fB\-\-scope\fR .RS 4 Create a transient \&.scope unit instead of the default transient \&.service unit\&. .RE .PP \fB\-\-unit=\fR .RS 4 Use this unit name instead of an automatically generated one\&. .RE .PP \fB\-\-property=\fR, \fB\-p\fR .RS 4 Sets a unit property for the scope or service unit that is created\&. This takes an assignment in the same format as \fBsystemctl\fR(1)\*(Aqs \fBset\-property\fR command\&. .RE .PP \fB\-\-description=\fR .RS 4 Provide a description for the service or scope unit\&. If not specified, the command itself will be used as a description\&. See \fIDescription=\fR in \fBsystemd.unit\fR(5)\&. .RE .PP \fB\-\-slice=\fR .RS 4 Make the new \&.service or \&.scope unit part of the specified slice, instead of the system\&.slice\&. .RE .PP \fB\-\-remain\-after\-exit\fR .RS 4 After the service or scope process has terminated, keep the service around until it is explicitly stopped\&. This is useful to collect runtime information about the service after it finished running\&. Also see \fIRemainAfterExit=\fR in \fBsystemd.service\fR(5)\&. .RE .PP \fB\-\-send\-sighup\fR .RS 4 When terminating the scope or service unit, send a SIGHUP immediately after SIGTERM\&. This is useful to indicate to shells and shell\-like processes that the connection has been severed\&. Also see \fISendSIGHUP=\fR in \fBsystemd.kill\fR(5)\&. .RE .PP \fB\-\-service\-type=\fR .RS 4 Sets the service type\&. Also see \fIType=\fR in \fBsystemd.service\fR(5)\&. This option has no effect in conjunction with \fB\-\-scope\fR\&. Defaults to \fBsimple\fR\&. .RE .PP \fB\-\-uid=\fR, \fB\-\-gid=\fR .RS 4 Runs the service process under the UNIX user and group\&. Also see \fIUser=\fR and \fIGroup=\fR in \fBsystemd.exec\fR(5)\&. .RE .PP \fB\-\-nice=\fR .RS 4 Runs the service process with the specified nice level\&. Also see \fINice=\fR in \fBsystemd.exec\fR(5)\&. .RE .PP \fB\-E \fR\fB\fINAME\fR\fR\fB=\fR\fB\fIVALUE\fR\fR, \fB\-\-setenv=\fR\fB\fINAME\fR\fR\fB=\fR\fB\fIVALUE\fR\fR .RS 4 Runs the service process with the specified environment variable set\&. Also see \fIEnvironment=\fR in \fBsystemd.exec\fR(5)\&. .RE .PP \fB\-\-pty\fR, \fB\-t\fR .RS 4 When invoking a command, the service connects its standard input and output to the invoking tty via a pseudo TTY device\&. This allows invoking binaries as services that expect interactive user input, such as interactive command shells\&. .RE .PP \fB\-\-quiet\fR, \fB\-q\fR .RS 4 Suppresses additional informational output while running\&. This is particularly useful in combination with \fB\-\-pty\fR when it will suppress the initial message explaining how to terminate the TTY connection\&. .RE .PP \fB\-\-on\-active=\fR, \fB\-\-on\-boot=\fR, \fB\-\-on\-startup=\fR, \fB\-\-on\-unit\-active=\fR, \fB\-\-on\-unit\-inactive=\fR .RS 4 Defines monotonic timers relative to different starting points\&. Also see \fIOnActiveSec=\fR, \fIOnBootSec=\fR, \fIOnStartupSec=\fR, \fIOnUnitActiveSec=\fR and \fIOnUnitInactiveSec=\fR in \fBsystemd.timer\fR(5)\&. This options have no effect in conjunction with \fB\-\-scope\fR\&. .RE .PP \fB\-\-on\-calendar=\fR .RS 4 Defines realtime (i\&.e\&. wallclock) timers with calendar event expressions\&. Also see \fIOnCalendar=\fR in \fBsystemd.timer\fR(5)\&. This option has no effect in conjunction with \fB\-\-scope\fR\&. .RE .PP \fB\-\-timer\-property=\fR .RS 4 Sets a timer unit property for the timer unit that is created\&. It is similar with \fB\-\-property\fR but only for created timer unit\&. This option only has effect in conjunction with \fB\-\-on\-active=\fR, \fB\-\-on\-boot=\fR, \fB\-\-on\-startup=\fR, \fB\-\-on\-unit\-active=\fR, \fB\-\-on\-unit\-inactive=\fR, \fB\-\-on\-calendar=\fR\&. This takes an assignment in the same format as \fBsystemctl\fR(1)\*(Aqs \fBset\-property\fR command\&. .RE .PP \fB\-\-no\-block\fR .RS 4 Do not synchronously wait for the requested operation to finish\&. If this is not specified, the job will be verified, enqueued and \fBsystemd\-run\fR will wait until the unit\*(Aqs start\-up is completed\&. By passing this argument, it is only verified and enqueued\&. .RE .PP \fB\-\-user\fR .RS 4 Talk to the service manager of the calling user, rather than the service manager of the system\&. .RE .PP \fB\-\-system\fR .RS 4 Talk to the service manager of the system\&. This is the implied default\&. .RE .PP \fB\-H\fR, \fB\-\-host=\fR .RS 4 Execute the operation remotely\&. Specify a hostname, or a username and hostname separated by "@", to connect to\&. The hostname may optionally be suffixed by a container name, separated by ":", which connects directly to a specific container on the specified host\&. This will use SSH to talk to the remote machine manager instance\&. Container names may be enumerated with \fBmachinectl \-H \fR\fB\fIHOST\fR\fR\&. .RE .PP \fB\-M\fR, \fB\-\-machine=\fR .RS 4 Execute operation on a local container\&. Specify a container name to connect to\&. .RE .PP \fB\-h\fR, \fB\-\-help\fR .RS 4 Print a short help text and exit\&. .RE .PP \fB\-\-version\fR .RS 4 Print a short version string and exit\&. .RE .PP All command line arguments after the first non\-option argument become part of the command line of the launched process\&. If a command is run as service unit, its first argument needs to be an absolute binary path\&. .SH "EXIT STATUS" .PP On success, 0 is returned, a non\-zero failure code otherwise\&. .SH "EXAMPLES" .PP \fBExample\ \&1.\ \&Logging environment variables provided by systemd to services\fR .sp .if n \{\ .RS 4 .\} .nf # systemd\-run env Running as unit: run\-19945\&.service # journalctl \-u run\-19945\&.service Sep 08 07:37:21 bupkis systemd[1]: Starting /usr/bin/env\&.\&.\&. Sep 08 07:37:21 bupkis systemd[1]: Started /usr/bin/env\&. Sep 08 07:37:21 bupkis env[19948]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Sep 08 07:37:21 bupkis env[19948]: LANG=en_US\&.UTF\-8 Sep 08 07:37:21 bupkis env[19948]: BOOT_IMAGE=/vmlinuz\-3\&.11\&.0\-0\&.rc5\&.git6\&.2\&.fc20\&.x86_64 .fi .if n \{\ .RE .\} .PP \fBExample\ \&2.\ \&Limiting resources available to a command\fR .sp .if n \{\ .RS 4 .\} .nf # systemd\-run \-p BlockIOWeight=10 updatedb .fi .if n \{\ .RE .\} .PP This command invokes the \fBupdatedb\fR(8) tool, but lowers the block I/O weight for it to 10\&. See \fBsystemd.resource-control\fR(5) for more information on the \fIBlockIOWeight=\fR property\&. .PP \fBExample\ \&3.\ \&Running commands at a specified time\fR .PP The following command will touch a file after 30 seconds\&. .sp .if n \{\ .RS 4 .\} .nf # date; systemd\-run \-\-on\-active=30 \-\-timer\-property=AccuracySec=100ms /bin/touch /tmp/foo Mon Dec 8 20:44:24 KST 2014 Running as unit: run\-71\&.timer Will run service as unit: run\-71\&.service # journalctl \-b \-u run\-71\&.timer \-\- Logs begin at Fri 2014\-12\-05 19:09:21 KST, end at Mon 2014\-12\-08 20:44:54 KST\&. \-\- Dec 08 20:44:38 container systemd[1]: Starting /bin/touch /tmp/foo\&. Dec 08 20:44:38 container systemd[1]: Started /bin/touch /tmp/foo\&. # journalctl \-b \-u run\-71\&.service \-\- Logs begin at Fri 2014\-12\-05 19:09:21 KST, end at Mon 2014\-12\-08 20:44:54 KST\&. \-\- Dec 08 20:44:48 container systemd[1]: Starting /bin/touch /tmp/foo\&.\&.\&. Dec 08 20:44:48 container systemd[1]: Started /bin/touch /tmp/foo\&. .fi .if n \{\ .RE .\} .PP \fBExample\ \&4.\ \&Allowing access to the tty\fR .PP The following command invokes /bin/bash as a service passing its standard input, output and error to the calling TTY\&. .sp .if n \{\ .RS 4 .\} .nf # systemd\-run \-t \-\-send\-sighup /bin/bash .fi .if n \{\ .RE .\} .PP \fBExample\ \&5.\ \&Start screen as a user service\fR .sp .if n \{\ .RS 4 .\} .nf $ systemd\-run \-\-scope \-\-user screen Running scope as unit run\-r14b0047ab6df45bfb45e7786cc839e76\&.scope\&. $ screen \-ls There is a screen on: 492\&.\&.laptop (Detached) 1 Socket in /var/run/screen/S\-fatima\&. .fi .if n \{\ .RE .\} .PP This starts the \fBscreen\fR process as a child of the \fBsystemd \-\-user\fR process that was started by user@\&.service, in a scope unit\&. A \fBsystemd.scope\fR(5) unit is used instead of a \fBsystemd.service\fR(5) unit, because \fBscreen\fR will exit when detaching from the terminal, and a service unit would be terminated\&. Running \fBscreen\fR as a user unit has the advantage that it is not part of the session scope\&. If \fIKillUserProcesses=yes\fR is configured in \fBlogind.conf\fR(5), the default, the session scope will be terminated when the user logs out of that session\&. .PP The user@\&.service is started automatically when the user first logs in, and stays around as long as at least one login session is open\&. After the user logs out of the last session, user@\&.service and all services underneath it are terminated\&. This behaviour is the default, when "lingering" is not enabled for that user\&. Enabling lingering means that user@\&.service is started automatically during boot, even if the user is not logged in, and that the service is not terminated when the user logs out\&. .PP Enabling lingering allows the user to run processes without being logged in, for example to allow \fBscreen\fR to persist after the user logs out, even if the session scope is terminated\&. In the default configuration, users can enable lingering for themselves: .sp .if n \{\ .RS 4 .\} .nf $ loginctl enable\-linger .fi .if n \{\ .RE .\} .SH "SEE ALSO" .PP \fBsystemd\fR(1), \fBsystemctl\fR(1), \fBsystemd.unit\fR(5), \fBsystemd.service\fR(5), \fBsystemd.scope\fR(5), \fBsystemd.slice\fR(5), \fBsystemd.exec\fR(5), \fBsystemd.resource-control\fR(5), \fBsystemd.timer\fR(5), \fBmachinectl\fR(1)