NAME¶
SUMO - Router for the microscopic road traffic simulation SUMO based on junction
turning ratios
SYNOPSIS¶
jtrrouter [
OPTION]
*
DESCRIPTION¶
SUMO jtrrouter Version 0.28.0
- Copyright (C) 2001-2016 DLR and contributors; http://sumo.dlr.de
Router for the microscopic road traffic simulation SUMO based on junction
- turning ratios.
Configuration Options:¶
- -c, --configuration-file FILE
- Loads the named config on startup
- --save-configuration FILE
- Saves current configuration into FILE
- --save-template FILE
- Saves a configuration template (empty) into FILE
- --save-schema FILE
- Saves the configuration schema into FILE
- --save-commented
- Adds comments to saved template, configuration, or schema
- -n, --net-file FILE
- Use FILE as SUMO-network to route on
- -d, --additional-files FILE
- Read additional network data (districts, bus stops) from FILE
- -a, --alternative-files FILE
- Read alternatives from FILE
- -f, --flow-files FILE
- Read flow-definitions from FILE(s)
- -t, --turn-ratio-files FILE
- Read turning ratios from FILE(s)
Output Options:¶
- --output-prefix STR
- Prefix which is applied to all output files. The special string 'TIME' is
replaced by the current time.
- -o, --output-file FILE
- Write generated routes to FILE
- --vtype-output FILE
- Write used vehicle types into separate FILE
- --exit-times
- Write exit times (weights) for each edge
Processing Options:¶
- --ignore-errors
- Continue if a route could not be build
- --unsorted-input
- Assume input is unsorted
- -s, --route-steps TIME
- Load routes for the next number of seconds ahead
- --randomize-flows
- generate random departure times for flow input
- --max-alternatives INT
- Prune the number of alternatives to INT
- --remove-loops
- Remove loops within the route; Remove turnarounds at start and end of the
route
- --repair
- Tries to correct a false route
- --repair.from
- Tries to correct an invalid starting edge by using the first usable edge
instead
- --repair.to
- Tries to correct an invalid destination edge by using the last usable edge
instead
- --weights.interpolate
- Interpolate edge weights at interval boundaries
- --with-taz
- Use origin and destination zones (districts) for in- and output
- --bulk-routing
- Aggregate routing queries with the same origin
- --routing-threads INT
- The number of parallel execution threads used for routing
- --max-edges-factor FLOAT
- Routes are cut off when the route edges to net edges ratio is larger than
FLOAT
- -T, --turn-defaults STR
- Use STR as default turn definition
- --sink-edges STR
- Use STR as list of sink edges
- -A, --accept-all-destinations
- Whether all edges are allowed as sink edges
- -i, --ignore-vclasses
- Ignore road restrictions based on vehicle class
- --allow-loops
- Allow to re-use a road
Defaults Options:¶
- --departlane STR
- Assigns a default depart lane
- --departpos STR
- Assigns a default depart position
- --departspeed STR
- Assigns a default depart speed
- --arrivallane STR
- Assigns a default arrival lane
- --arrivalpos STR
- Assigns a default arrival position
- --arrivalspeed STR
- Assigns a default arrival speed
- --defaults-override
- Defaults will override given values
Time Options:¶
- -b, --begin TIME
- Defines the begin time; Previous trips will be discarded
- -e, --end TIME
- Defines the end time; Later trips will be discarded; Defaults to the
maximum time that SUMO can represent
Report Options:¶
- -v, --verbose
- Switches to verbose output
- --print-options
- Prints option values before processing
- -?, --help
- Prints this screen
- -V, --version
- Prints the current version
- -X, --xml-validation STR
- Set schema validation scheme of XML inputs ("never",
"auto" or "always")
- --xml-validation.net STR
- Set schema validation scheme of SUMO network inputs ("never",
"auto" or "always")
- -W, --no-warnings
- Disables output of warnings
- -l, --log FILE
- Writes all messages to FILE (implies verbose)
- --message-log FILE
- Writes all non-error messages to FILE (implies verbose)
- --error-log FILE
- Writes all warnings and errors to FILE
- --stats-period INT
- Defines how often statistics shall be printed
- --no-step-log
- Disable console output of route parsing step
Random Number Options:¶
- --random
- Initialises the random number generator with the current system time
- --seed INT
- Initialises the random number generator with the given value
EXAMPLES¶
- jtrrouter -c <CONFIGURATION>
- run with routing options defined in file
REPORTING BUGS¶
Report bugs at <
http://sumo.dlr.de/trac/>.
Get in contact via <sumo@dlr.de>.
-
Build features: x86_64-pc-linux-gnu InternalLanes DoublePrecision TRACI PROJ
GDAL GUI
Copyright (C) 2001-2016 DLR and contributors; http://sumo.dlr.de
SUMO jtrrouter Version 0.28.0 is part of SUMO.
SUMO is free software: you can redistribute it and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program. If not, see
http://www.gnu.org/licenses/gpl.html