.\" Copyright 1993 Giorgio Ciucci .\" .\" %%%LICENSE_START(VERBATIM) .\" Permission is granted to make and distribute verbatim copies of this .\" manual provided the copyright notice and this permission notice are .\" preserved on all copies. .\" .\" Permission is granted to copy and distribute modified versions of this .\" manual under the conditions for verbatim copying, provided that the .\" entire resulting derived work is distributed under the terms of a .\" permission notice identical to this one. .\" .\" Since the Linux kernel and libraries are constantly changing, this .\" manual page may be incorrect or out-of-date. The author(s) assume no .\" responsibility for errors or omissions, or for damages resulting from .\" the use of the information contained herein. The author(s) may not .\" have taken the same level of care in the production of this manual, .\" which is licensed free of charge, as they might when working .\" professionally. .\" .\" Formatted or processed versions of this manual, if unaccompanied by .\" the source, must acknowledge the copyright and authors of this work. .\" %%%LICENSE_END .\" .\" Modified Tue Oct 22 16:40:11 1996 by Eric S. Raymond .\" Modified Mon Jul 10 21:09:59 2000 by aeb .\" Modified 1 Jun 2002, Michael Kerrisk .\" Language clean-ups. .\" Enhanced and corrected information on msg_qbytes, MSGMNB and MSGMAX .\" Added note on restart behavior of msgsnd() and msgrcv() .\" Formatting clean-ups (argument and field names marked as .I .\" instead of .B) .\" Modified, 27 May 2004, Michael Kerrisk .\" Added notes on capability requirements .\" Modified, 11 Nov 2004, Michael Kerrisk .\" Language and formatting clean-ups .\" Added notes on /proc files .\" .TH MSGOP 2 2016-10-08 "Linux" "Linux Programmer's Manual" .SH NAME msgrcv, msgsnd \- System V message queue operations .SH SYNOPSIS .nf .B #include .B #include .B #include .sp .BI "int msgsnd(int " msqid ", const void *" msgp ", size_t " msgsz \ ", int " msgflg ); .sp .BI "ssize_t msgrcv(int " msqid ", void *" msgp ", size_t " msgsz \ ", long " msgtyp , .BI " int " msgflg ); .fi .SH DESCRIPTION The .BR msgsnd () and .BR msgrcv () system calls are used, respectively, to send messages to, and receive messages from, a System\ V message queue. The calling process must have write permission on the message queue in order to send a message, and read permission to receive a message. .PP The .I msgp argument is a pointer to a caller-defined structure of the following general form: .in +4n .nf struct msgbuf { long mtype; /* message type, must be > 0 */ char mtext[1]; /* message data */ }; .fi .in .PP The .I mtext field is an array (or other structure) whose size is specified by .IR msgsz , a nonnegative integer value. Messages of zero length (i.e., no .I mtext field) are permitted. The .I mtype field must have a strictly positive integer value. This value can be used by the receiving process for message selection (see the description of .BR msgrcv () below). .SS msgsnd() The .BR msgsnd () system call appends a copy of the message pointed to by .I msgp to the message queue whose identifier is specified by .IR msqid . .PP If sufficient space is available in the queue, .BR msgsnd () succeeds immediately. The queue capacity is governed by the .I msg_qbytes field in the associated data structure for the message queue. During queue creation this field is initialized to .B MSGMNB bytes, but this limit can be modified using .BR msgctl (2). A message queue is considered to be full if either of the following conditions is true: .IP * 2 Adding a new message to the queue would cause the total number of bytes in the queue to exceed the queue's maximum size (the .I msg_qbytes field). .IP * Adding another message to the queue would cause the total number of messages in the queue to exceed the queue's maximum size (the .I msg_qbytes field). This check is necessary to prevent an unlimited number of zero-length messages being placed on the queue. Although such messages contain no data, they nevertheless consume (locked) kernel memory. .PP If insufficient space is available in the queue, then the default behavior of .BR msgsnd () is to block until space becomes available. If .B IPC_NOWAIT is specified in .IR msgflg , then the call instead fails with the error .BR EAGAIN . A blocked .BR msgsnd () call may also fail if: .IP * 2 the queue is removed, in which case the system call fails with .I errno set to .BR EIDRM ; or .IP * a signal is caught, in which case the system call fails with .I errno set to .BR EINTR ; see .BR signal (7). .RB ( msgsnd () is never automatically restarted after being interrupted by a signal handler, regardless of the setting of the .B SA_RESTART flag when establishing a signal handler.) .PP Upon successful completion the message queue data structure is updated as follows: .IP .I msg_lspid is set to the process ID of the calling process. .IP .I msg_qnum is incremented by 1. .IP .I msg_stime is set to the current time. .SS msgrcv() The .BR msgrcv () system call removes a message from the queue specified by .I msqid and places it in the buffer pointed to by .IR msgp . .PP The argument .I msgsz specifies the maximum size in bytes for the member .I mtext of the structure pointed to by the .I msgp argument. If the message text has length greater than .IR msgsz , then the behavior depends on whether .B MSG_NOERROR is specified in .IR msgflg . If .B MSG_NOERROR is specified, then the message text will be truncated (and the truncated part will be lost); if .B MSG_NOERROR is not specified, then the message isn't removed from the queue and the system call fails returning \-1 with .I errno set to .BR E2BIG . .PP Unless .B MSG_COPY is specified in .IR msgflg (see below), the .I msgtyp argument specifies the type of message requested, as follows: .IP * 2 If .I msgtyp is 0, then the first message in the queue is read. .IP * If .I msgtyp is greater than 0, then the first message in the queue of type .I msgtyp is read, unless .B MSG_EXCEPT was specified in .IR msgflg , in which case the first message in the queue of type not equal to .I msgtyp will be read. .IP * If .I msgtyp is less than 0, then the first message in the queue with the lowest type less than or equal to the absolute value of .I msgtyp will be read. .PP The .I msgflg argument is a bit mask constructed by ORing together zero or more of the following flags: .TP .B IPC_NOWAIT Return immediately if no message of the requested type is in the queue. The system call fails with .I errno set to .BR ENOMSG . .TP .BR MSG_COPY " (since Linux 3.8)" .\" commit 4a674f34ba04a002244edaf891b5da7fc1473ae8 Nondestructively fetch a copy of the message at the ordinal position in the queue specified by .I msgtyp (messages are considered to be numbered starting at 0). This flag must be specified in conjunction with .BR IPC_NOWAIT , with the result that, if there is no message available at the given position, the call fails immediately with the error .BR ENOMSG . Because they alter the meaning of .I msgtyp in orthogonal ways, .BR MSG_COPY and .BR MSG_EXCEPT may not both be specified in .IR msgflg . The .BR MSG_COPY flag was added for the implementation of the kernel checkpoint-restore facility and is available only if the kernel was built with the .B CONFIG_CHECKPOINT_RESTORE option. .TP .B MSG_EXCEPT Used with .I msgtyp greater than 0 to read the first message in the queue with message type that differs from .IR msgtyp . .TP .B MSG_NOERROR To truncate the message text if longer than .I msgsz bytes. .PP If no message of the requested type is available and .B IPC_NOWAIT isn't specified in .IR msgflg , the calling process is blocked until one of the following conditions occurs: .IP * 2 A message of the desired type is placed in the queue. .IP * The message queue is removed from the system. In this case, the system call fails with .I errno set to .BR EIDRM . .IP * The calling process catches a signal. In this case, the system call fails with .I errno set to .BR EINTR . .RB ( msgrcv () is never automatically restarted after being interrupted by a signal handler, regardless of the setting of the .B SA_RESTART flag when establishing a signal handler.) .PP Upon successful completion the message queue data structure is updated as follows: .IP .I msg_lrpid is set to the process ID of the calling process. .IP .I msg_qnum is decremented by 1. .IP .I msg_rtime is set to the current time. .SH RETURN VALUE On failure both functions return \-1 with .I errno indicating the error, otherwise .BR msgsnd () returns 0 and .BR msgrcv () returns the number of bytes actually copied into the .I mtext array. .SH ERRORS When .BR msgsnd () fails, .I errno will be set to one among the following values: .TP .B EACCES The calling process does not have write permission on the message queue, and does not have the .B CAP_IPC_OWNER capability. .TP .B EAGAIN The message can't be sent due to the .I msg_qbytes limit for the queue and .B IPC_NOWAIT was specified in .IR msgflg . .TP .B EFAULT The address pointed to by .I msgp isn't accessible. .TP .B EIDRM The message queue was removed. .TP .B EINTR Sleeping on a full message queue condition, the process caught a signal. .TP .B EINVAL Invalid .I msqid value, or nonpositive .I mtype value, or invalid .I msgsz value (less than 0 or greater than the system value .BR MSGMAX ). .TP .B ENOMEM The system does not have enough memory to make a copy of the message pointed to by .IR msgp . .PP When .BR msgrcv () fails, .I errno will be set to one among the following values: .TP .B E2BIG The message text length is greater than .I msgsz and .B MSG_NOERROR isn't specified in .IR msgflg . .TP .B EACCES The calling process does not have read permission on the message queue, and does not have the .B CAP_IPC_OWNER capability in the user namespace that governs its IPC namespace. .TP .B EFAULT The address pointed to by .I msgp isn't accessible. .TP .B EIDRM While the process was sleeping to receive a message, the message queue was removed. .TP .B EINTR While the process was sleeping to receive a message, the process caught a signal; see .BR signal (7). .TP .B EINVAL .I msqid was invalid, or .I msgsz was less than 0. .TP .BR EINVAL " (since Linux 3.14)" .I msgflg specified .BR MSG_COPY , but not .BR IPC_NOWAIT . .TP .BR EINVAL " (since Linux 3.14)" .I msgflg specified both .BR MSG_COPY and .BR MSG_EXCEPT . .TP .B ENOMSG .B IPC_NOWAIT was specified in .I msgflg and no message of the requested type existed on the message queue. .TP .B ENOMSG .B IPC_NOWAIT and .B MSG_COPY were specified in .I msgflg and the queue contains less than .I msgtyp messages. .TP .BR ENOSYS " (since Linux 3.8)" .I MSG_COPY was specified in .IR msgflg , and this kernel was configured without .BR CONFIG_CHECKPOINT_RESTORE . .SH CONFORMING TO POSIX.1-2001, POSIX.1-2008, SVr4. The .B MSG_EXCEPT and .B MSG_COPY flags are Linux-specific; their definitions can be obtained by defining the .B _GNU_SOURCE .\" MSG_COPY since glibc 2.18 feature test macro. .SH NOTES The inclusion of .I and .I isn't required on Linux or by any version of POSIX. However, some old implementations required the inclusion of these header files, and the SVID also documented their inclusion. Applications intended to be portable to such old systems may need to include these header files. .\" Like Linux, the FreeBSD man pages still document .\" the inclusion of these header files. The .I msgp argument is declared as \fIstruct msgbuf\ *\fP in glibc 2.0 and 2.1. It is declared as \fIvoid\ *\fP in glibc 2.2 and later, as required by SUSv2 and SUSv3. The following limits on message queue resources affect the .BR msgsnd () call: .TP .B MSGMAX Maximum size of a message text, in bytes (default value: 8192 bytes). On Linux, this limit can be read and modified via .IR /proc/sys/kernel/msgmax . .TP .B MSGMNB Maximum number of bytes that can be held in a message queue (default value: 16384 bytes). On Linux, this limit can be read and modified via .IR /proc/sys/kernel/msgmnb . A privileged process (Linux: a process with the .B CAP_SYS_RESOURCE capability) can increase the size of a message queue beyond .B MSGMNB using the .BR msgctl (2) .B IPC_SET operation. .PP The implementation has no intrinsic system-wide limits on the number of message headers .RB ( MSGTQL ) and the number of bytes in the message pool .RB ( MSGPOOL ). .SH BUGS In Linux 3.13 and earlier, if .BR msgrcv () was called with the .BR MSG_COPY flag, but without .BR IPC_NOWAIT , and the message queue contained less than .I msgtyp messages, then the call would block until the next message is written to the queue. .\" http://marc.info/?l=linux-kernel&m=139048542803605&w=2 At that point, the call would return a copy of the message, .I regardless of whether that message was at the ordinal position .IR msgtyp . This bug is fixed .\" commit 4f87dac386cc43d5525da7a939d4b4e7edbea22c in Linux 3.14. Specifying both .B MSG_COPY and .B MSC_EXCEPT in .I msgflg is a logical error (since these flags impose different interpretations on .IR msgtyp ). In Linux 3.13 and earlier, .\" http://marc.info/?l=linux-kernel&m=139048542803605&w=2 this error was not diagnosed by .BR msgrcv (). This bug is fixed .\" commit 4f87dac386cc43d5525da7a939d4b4e7edbea22c in Linux 3.14. .SH EXAMPLE The program below demonstrates the use of .BR msgsnd () and .BR msgrcv (). The example program is first run with the \fB\-s\fP option to send a message and then run again with the \fB\-r\fP option to receive a message. The following shell session shows a sample run of the program: .in +4n .nf .RB "$" " ./a.out \-s" sent: a message at Wed Mar 4 16:25:45 2015 .RB "$" " ./a.out \-r" message received: a message at Wed Mar 4 16:25:45 2015 .fi .in .SS Program source \& .nf #include #include #include #include #include #include #include #include #include struct msgbuf { long mtype; char mtext[80]; }; static void usage(char *prog_name, char *msg) { if (msg != NULL) fputs(msg, stderr); fprintf(stderr, "Usage: %s [options]\\n", prog_name); fprintf(stderr, "Options are:\\n"); fprintf(stderr, "\-s send message using msgsnd()\\n"); fprintf(stderr, "\-r read message using msgrcv()\\n"); fprintf(stderr, "\-t message type (default is 1)\\n"); fprintf(stderr, "\-k message queue key (default is 1234)\\n"); exit(EXIT_FAILURE); } static void send_msg(int qid, int msgtype) { struct msgbuf msg; time_t t; msg.mtype = msgtype; time(&t); snprintf(msg.mtext, sizeof(msg.mtext), "a message at %s", ctime(&t)); if (msgsnd(qid, (void *) &msg, sizeof(msg.mtext), IPC_NOWAIT) == \-1) { perror("msgsnd error"); exit(EXIT_FAILURE); } printf("sent: %s\\n", msg.mtext); } static void get_msg(int qid, int msgtype) { struct msgbuf msg; if (msgrcv(qid, (void *) &msg, sizeof(msg.mtext), msgtype, MSG_NOERROR | IPC_NOWAIT) == \-1) { if (errno != ENOMSG) { perror("msgrcv"); exit(EXIT_FAILURE); } printf("No message available for msgrcv()\\n"); } else printf("message received: %s\\n", msg.mtext); } int main(int argc, char *argv[]) { int qid, opt; int mode = 0; /* 1 = send, 2 = receive */ int msgtype = 1; int msgkey = 1234; while ((opt = getopt(argc, argv, "srt:k:")) != \-1) { switch (opt) { case \(aqs\(aq: mode = 1; break; case \(aqr\(aq: mode = 2; break; case \(aqt\(aq: msgtype = atoi(optarg); if (msgtype <= 0) usage(argv[0], "\-t option must be greater than 0\\n"); break; case \(aqk\(aq: msgkey = atoi(optarg); break; default: usage(argv[0], "Unrecognized option\\n"); } } if (mode == 0) usage(argv[0], "must use either \-s or \-r option\\n"); qid = msgget(msgkey, IPC_CREAT | 0666); if (qid == \-1) { perror("msgget"); exit(EXIT_FAILURE); } if (mode == 2) get_msg(qid, msgtype); else send_msg(qid, msgtype); exit(EXIT_SUCCESS); } .fi .SH SEE ALSO .BR msgctl (2), .BR msgget (2), .BR capabilities (7), .BR mq_overview (7), .BR svipc (7) .SH COLOPHON This page is part of release 4.10 of the Linux .I man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at \%https://www.kernel.org/doc/man\-pages/.