.\" Copyright (c) 1992 Drew Eckhardt , March 28, 1992 .\" and Copyright (c) Michael Kerrisk, 2001, 2002, 2005, 2013 .\" .\" %%%LICENSE_START(GPL_NOVERSION_ONELINE) .\" May be distributed under the GNU General Public License. .\" %%%LICENSE_END .\" .\" Modified by Michael Haardt .\" Modified 24 Jul 1993 by Rik Faith .\" Modified 21 Aug 1994 by Michael Chastain : .\" New man page (copied from 'fork.2'). .\" Modified 10 June 1995 by Andries Brouwer .\" Modified 25 April 1998 by Xavier Leroy .\" Modified 26 Jun 2001 by Michael Kerrisk .\" Mostly upgraded to 2.4.x .\" Added prototype for sys_clone() plus description .\" Added CLONE_THREAD with a brief description of thread groups .\" Added CLONE_PARENT and revised entire page remove ambiguity .\" between "calling process" and "parent process" .\" Added CLONE_PTRACE and CLONE_VFORK .\" Added EPERM and EINVAL error codes .\" Renamed "__clone" to "clone" (which is the prototype in ) .\" various other minor tidy ups and clarifications. .\" Modified 26 Jun 2001 by Michael Kerrisk .\" Updated notes for 2.4.7+ behavior of CLONE_THREAD .\" Modified 15 Oct 2002 by Michael Kerrisk .\" Added description for CLONE_NEWNS, which was added in 2.4.19 .\" Slightly rephrased, aeb. .\" Modified 1 Feb 2003 - added CLONE_SIGHAND restriction, aeb. .\" Modified 1 Jan 2004 - various updates, aeb .\" Modified 2004-09-10 - added CLONE_PARENT_SETTID etc. - aeb. .\" 2005-04-12, mtk, noted the PID caching behavior of NPTL's getpid() .\" wrapper under BUGS. .\" 2005-05-10, mtk, added CLONE_SYSVSEM, CLONE_UNTRACED, CLONE_STOPPED. .\" 2005-05-17, mtk, Substantially enhanced discussion of CLONE_THREAD. .\" 2008-11-18, mtk, order CLONE_* flags alphabetically .\" 2008-11-18, mtk, document CLONE_NEWPID .\" 2008-11-19, mtk, document CLONE_NEWUTS .\" 2008-11-19, mtk, document CLONE_NEWIPC .\" 2008-11-19, Jens Axboe, mtk, document CLONE_IO .\" .TH CLONE 2 2016-12-12 "Linux" "Linux Programmer's Manual" .SH NAME clone, __clone2 \- create a child process .SH SYNOPSIS .nf /* Prototype for the glibc wrapper function */ .B #define _GNU_SOURCE .B #include .BI "int clone(int (*" "fn" ")(void *), void *" child_stack , .BI " int " flags ", void *" "arg" ", ... " .BI " /* pid_t *" ptid ", void *" newtls \ ", pid_t *" ctid " */ );" /* For the prototype of the raw system call, see NOTES */ .fi .SH DESCRIPTION .BR clone () creates a new process, in a manner similar to .BR fork (2). This page describes both the glibc .BR clone () wrapper function and the underlying system call on which it is based. The main text describes the wrapper function; the differences for the raw system call are described toward the end of this page. Unlike .BR fork (2), .BR clone () allows the child process to share parts of its execution context with the calling process, such as the memory space, the table of file descriptors, and the table of signal handlers. (Note that on this manual page, "calling process" normally corresponds to "parent process". But see the description of .B CLONE_PARENT below.) One use of .BR clone () is to implement threads: multiple threads of control in a program that run concurrently in a shared memory space. When the child process is created with .BR clone (), it executes the function .IR fn ( arg ). (This differs from .BR fork (2), where execution continues in the child from the point of the .BR fork (2) call.) The .I fn argument is a pointer to a function that is called by the child process at the beginning of its execution. The .I arg argument is passed to the .I fn function. When the .IR fn ( arg ) function application returns, the child process terminates. The integer returned by .I fn is the exit code for the child process. The child process may also terminate explicitly by calling .BR exit (2) or after receiving a fatal signal. The .I child_stack argument specifies the location of the stack used by the child process. Since the child and calling process may share memory, it is not possible for the child process to execute in the same stack as the calling process. The calling process must therefore set up memory space for the child stack and pass a pointer to this space to .BR clone (). Stacks grow downward on all processors that run Linux (except the HP PA processors), so .I child_stack usually points to the topmost address of the memory space set up for the child stack. The low byte of .I flags contains the number of the .I "termination signal" sent to the parent when the child dies. If this signal is specified as anything other than .BR SIGCHLD , then the parent process must specify the .B __WALL or .B __WCLONE options when waiting for the child with .BR wait (2). If no signal is specified, then the parent process is not signaled when the child terminates. .I flags may also be bitwise-or'ed with zero or more of the following constants, in order to specify what is shared between the calling process and the child process: .TP .BR CLONE_CHILD_CLEARTID " (since Linux 2.5.49)" Clear (zero) the child thread ID at the location .I ctid in child memory when the child exits, and do a wakeup on the futex at that address. The address involved may be changed by the .BR set_tid_address (2) system call. This is used by threading libraries. .TP .BR CLONE_CHILD_SETTID " (since Linux 2.5.49)" Store the child thread ID at the location .I ctid in the child's memory. The store operation completes before .BR clone () returns control to user space. .TP .BR CLONE_FILES " (since Linux 2.0)" If .B CLONE_FILES is set, the calling process and the child process share the same file descriptor table. Any file descriptor created by the calling process or by the child process is also valid in the other process. Similarly, if one of the processes closes a file descriptor, or changes its associated flags (using the .BR fcntl (2) .B F_SETFD operation), the other process is also affected. If a process sharing a file descriptor table calls .BR execve (2), its file descriptor table is duplicated (unshared). If .B CLONE_FILES is not set, the child process inherits a copy of all file descriptors opened in the calling process at the time of .BR clone (). Subsequent operations that open or close file descriptors, or change file descriptor flags, performed by either the calling process or the child process do not affect the other process. Note, however, that the duplicated file descriptors in the child refer to the same open file descriptions as the corresponding file descriptors in the calling process, and thus share file offsets and file status flags (see .BR open (2)). .TP .BR CLONE_FS " (since Linux 2.0)" If .B CLONE_FS is set, the caller and the child process share the same filesystem information. This includes the root of the filesystem, the current working directory, and the umask. Any call to .BR chroot (2), .BR chdir (2), or .BR umask (2) performed by the calling process or the child process also affects the other process. If .B CLONE_FS is not set, the child process works on a copy of the filesystem information of the calling process at the time of the .BR clone () call. Calls to .BR chroot (2), .BR chdir (2), .BR umask (2) performed later by one of the processes do not affect the other process. .TP .BR CLONE_IO " (since Linux 2.6.25)" If .B CLONE_IO is set, then the new process shares an I/O context with the calling process. If this flag is not set, then (as with .BR fork (2)) the new process has its own I/O context. .\" The following based on text from Jens Axboe The I/O context is the I/O scope of the disk scheduler (i.e., what the I/O scheduler uses to model scheduling of a process's I/O). If processes share the same I/O context, they are treated as one by the I/O scheduler. As a consequence, they get to share disk time. For some I/O schedulers, .\" the anticipatory and CFQ scheduler if two processes share an I/O context, they will be allowed to interleave their disk access. If several threads are doing I/O on behalf of the same process .RB ( aio_read (3), for instance), they should employ .BR CLONE_IO to get better I/O performance. .\" with CFQ and AS. If the kernel is not configured with the .B CONFIG_BLOCK option, this flag is a no-op. .TP .BR CLONE_NEWCGROUP " (since Linux 4.6)" Create the process in a new cgroup namespace. If this flag is not set, then (as with .BR fork (2)) the process is created in the same cgroup namespaces as the calling process. This flag is intended for the implementation of containers. For further information on cgroup namespaces, see .BR cgroup_namespaces (7). Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWCGROUP . .\" .TP .BR CLONE_NEWIPC " (since Linux 2.6.19)" If .B CLONE_NEWIPC is set, then create the process in a new IPC namespace. If this flag is not set, then (as with .BR fork (2)), the process is created in the same IPC namespace as the calling process. This flag is intended for the implementation of containers. An IPC namespace provides an isolated view of System\ V IPC objects (see .BR svipc (7)) and (since Linux 2.6.30) .\" commit 7eafd7c74c3f2e67c27621b987b28397110d643f .\" https://lwn.net/Articles/312232/ POSIX message queues (see .BR mq_overview (7)). The common characteristic of these IPC mechanisms is that IPC objects are identified by mechanisms other than filesystem pathnames. Objects created in an IPC namespace are visible to all other processes that are members of that namespace, but are not visible to processes in other IPC namespaces. When an IPC namespace is destroyed (i.e., when the last process that is a member of the namespace terminates), all IPC objects in the namespace are automatically destroyed. Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWIPC . This flag can't be specified in conjunction with .BR CLONE_SYSVSEM . For further information on IPC namespaces, see .BR namespaces (7). .TP .BR CLONE_NEWNET " (since Linux 2.6.24)" (The implementation of this flag was completed only by about kernel version 2.6.29.) If .B CLONE_NEWNET is set, then create the process in a new network namespace. If this flag is not set, then (as with .BR fork (2)) the process is created in the same network namespace as the calling process. This flag is intended for the implementation of containers. A network namespace provides an isolated view of the networking stack (network device interfaces, IPv4 and IPv6 protocol stacks, IP routing tables, firewall rules, the .I /proc/net and .I /sys/class/net directory trees, sockets, etc.). A physical network device can live in exactly one network namespace. A virtual network device ("veth") pair provides a pipe-like abstraction .\" FIXME . Add pointer to veth(4) page when it is eventually completed that can be used to create tunnels between network namespaces, and can be used to create a bridge to a physical network device in another namespace. When a network namespace is freed (i.e., when the last process in the namespace terminates), its physical network devices are moved back to the initial network namespace (not to the parent of the process). For further information on network namespaces, see .BR namespaces (7). Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWNET . .TP .BR CLONE_NEWNS " (since Linux 2.4.19)" If .B CLONE_NEWNS is set, the cloned child is started in a new mount namespace, initialized with a copy of the namespace of the parent. If .B CLONE_NEWNS is not set, the child lives in the same mount namespace as the parent. Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWNS . It is not permitted to specify both .B CLONE_NEWNS and .B CLONE_FS .\" See https://lwn.net/Articles/543273/ in the same .BR clone () call. For further information on mount namespaces, see .BR namespaces (7) and .BR mount_namespaces (7). .TP .BR CLONE_NEWPID " (since Linux 2.6.24)" .\" This explanation draws a lot of details from .\" http://lwn.net/Articles/259217/ .\" Authors: Pavel Emelyanov .\" and Kir Kolyshkin .\" .\" The primary kernel commit is 30e49c263e36341b60b735cbef5ca37912549264 .\" Author: Pavel Emelyanov If .B CLONE_NEWPID is set, then create the process in a new PID namespace. If this flag is not set, then (as with .BR fork (2)) the process is created in the same PID namespace as the calling process. This flag is intended for the implementation of containers. For further information on PID namespaces, see .BR namespaces (7) and .BR pid_namespaces (7). Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWPID . This flag can't be specified in conjunction with .BR CLONE_THREAD or .BR CLONE_PARENT . .TP .BR CLONE_NEWUSER (This flag first became meaningful for .BR clone () in Linux 2.6.23, the current .BR clone () semantics were merged in Linux 3.5, and the final pieces to make the user namespaces completely usable were merged in Linux 3.8.) If .B CLONE_NEWUSER is set, then create the process in a new user namespace. If this flag is not set, then (as with .BR fork (2)) the process is created in the same user namespace as the calling process. For further information on user namespaces, see .BR namespaces (7) and .BR user_namespaces (7) Before Linux 3.8, use of .BR CLONE_NEWUSER required that the caller have three capabilities: .BR CAP_SYS_ADMIN , .BR CAP_SETUID , and .BR CAP_SETGID . .\" Before Linux 2.6.29, it appears that only CAP_SYS_ADMIN was needed Starting with Linux 3.8, no privileges are needed to create a user namespace. This flag can't be specified in conjunction with .BR CLONE_THREAD or .BR CLONE_PARENT . For security reasons, .\" commit e66eded8309ebf679d3d3c1f5820d1f2ca332c71 .\" https://lwn.net/Articles/543273/ .\" The fix actually went into 3.9 and into 3.8.3. However, user namespaces .\" were, for practical purposes, unusable in earlier 3.8.x because of the .\" various filesystems that didn't support userns. .BR CLONE_NEWUSER cannot be specified in conjunction with .BR CLONE_FS . For further information on user namespaces, see .BR user_namespaces (7). .TP .BR CLONE_NEWUTS " (since Linux 2.6.19)" If .B CLONE_NEWUTS is set, then create the process in a new UTS namespace, whose identifiers are initialized by duplicating the identifiers from the UTS namespace of the calling process. If this flag is not set, then (as with .BR fork (2)) the process is created in the same UTS namespace as the calling process. This flag is intended for the implementation of containers. A UTS namespace is the set of identifiers returned by .BR uname (2); among these, the domain name and the hostname can be modified by .BR setdomainname (2) and .BR sethostname (2), respectively. Changes made to the identifiers in a UTS namespace are visible to all other processes in the same namespace, but are not visible to processes in other UTS namespaces. Only a privileged process .RB ( CAP_SYS_ADMIN ) can employ .BR CLONE_NEWUTS . For further information on UTS namespaces, see .BR namespaces (7). .TP .BR CLONE_PARENT " (since Linux 2.3.12)" If .B CLONE_PARENT is set, then the parent of the new child (as returned by .BR getppid (2)) will be the same as that of the calling process. If .B CLONE_PARENT is not set, then (as with .BR fork (2)) the child's parent is the calling process. Note that it is the parent process, as returned by .BR getppid (2), which is signaled when the child terminates, so that if .B CLONE_PARENT is set, then the parent of the calling process, rather than the calling process itself, will be signaled. .TP .BR CLONE_PARENT_SETTID " (since Linux 2.5.49)" Store the child thread ID at the location .I ptid in the parent's memory. (In Linux 2.5.32-2.5.48 there was a flag .B CLONE_SETTID that did this.) The store operation completes before .BR clone () returns control to user space. .TP .BR CLONE_PID " (obsolete)" If .B CLONE_PID is set, the child process is created with the same process ID as the calling process. This is good for hacking the system, but otherwise of not much use. Since 2.3.21 this flag can be specified only by the system boot process (PID 0). It disappeared in Linux 2.5.16. Since then, the kernel silently ignores it without error. .TP .BR CLONE_PTRACE " (since Linux 2.2)" If .B CLONE_PTRACE is specified, and the calling process is being traced, then trace the child also (see .BR ptrace (2)). .TP .BR CLONE_SETTLS " (since Linux 2.5.32)" The TLS (Thread Local Storage) descriptor is set to .I newtls. The interpretation of .I newtls and the resulting effect is architecture dependent. On x86, .I newtls is interpreted as a .IR "struct user_desc *" (See .BR set_thread_area (2)). On x86_64 it is the new value to be set for the %fs base register (See the .I ARCH_SET_FS argument to .BR arch_prctl (2)). On architectures with a dedicated TLS register, it is the new value of that register. .TP .BR CLONE_SIGHAND " (since Linux 2.0)" If .B CLONE_SIGHAND is set, the calling process and the child process share the same table of signal handlers. If the calling process or child process calls .BR sigaction (2) to change the behavior associated with a signal, the behavior is changed in the other process as well. However, the calling process and child processes still have distinct signal masks and sets of pending signals. So, one of them may block or unblock some signals using .BR sigprocmask (2) without affecting the other process. If .B CLONE_SIGHAND is not set, the child process inherits a copy of the signal handlers of the calling process at the time .BR clone () is called. Calls to .BR sigaction (2) performed later by one of the processes have no effect on the other process. Since Linux 2.6.0-test6, .I flags must also include .B CLONE_VM if .B CLONE_SIGHAND is specified .TP .BR CLONE_STOPPED " (since Linux 2.6.0-test2)" If .B CLONE_STOPPED is set, then the child is initially stopped (as though it was sent a .B SIGSTOP signal), and must be resumed by sending it a .B SIGCONT signal. This flag was .I deprecated from Linux 2.6.25 onward, and was .I removed altogether in Linux 2.6.38. Since then, the kernel silently ignores it without error. .\" glibc 2.8 removed this defn from bits/sched.h Starting with Linux 4.6, the same bit was reused for the .BR CLONE_NEWCGROUP flag. .TP .BR CLONE_SYSVSEM " (since Linux 2.5.10)" If .B CLONE_SYSVSEM is set, then the child and the calling process share a single list of System V semaphore adjustment .RI ( semadj ) values (see .BR semop (2)). In this case, the shared list accumulates .I semadj values across all processes sharing the list, and semaphore adjustments are performed only when the last process that is sharing the list terminates (or ceases sharing the list using .BR unshare (2)). If this flag is not set, then the child has a separate .I semadj list that is initially empty. .TP .BR CLONE_THREAD " (since Linux 2.4.0-test8)" If .B CLONE_THREAD is set, the child is placed in the same thread group as the calling process. To make the remainder of the discussion of .B CLONE_THREAD more readable, the term "thread" is used to refer to the processes within a thread group. Thread groups were a feature added in Linux 2.4 to support the POSIX threads notion of a set of threads that share a single PID. Internally, this shared PID is the so-called thread group identifier (TGID) for the thread group. Since Linux 2.4, calls to .BR getpid (2) return the TGID of the caller. The threads within a group can be distinguished by their (system-wide) unique thread IDs (TID). A new thread's TID is available as the function result returned to the caller of .BR clone (), and a thread can obtain its own TID using .BR gettid (2). When a call is made to .BR clone () without specifying .BR CLONE_THREAD , then the resulting thread is placed in a new thread group whose TGID is the same as the thread's TID. This thread is the .I leader of the new thread group. A new thread created with .B CLONE_THREAD has the same parent process as the caller of .BR clone () (i.e., like .BR CLONE_PARENT ), so that calls to .BR getppid (2) return the same value for all of the threads in a thread group. When a .B CLONE_THREAD thread terminates, the thread that created it using .BR clone () is not sent a .B SIGCHLD (or other termination) signal; nor can the status of such a thread be obtained using .BR wait (2). (The thread is said to be .IR detached .) After all of the threads in a thread group terminate the parent process of the thread group is sent a .B SIGCHLD (or other termination) signal. If any of the threads in a thread group performs an .BR execve (2), then all threads other than the thread group leader are terminated, and the new program is executed in the thread group leader. If one of the threads in a thread group creates a child using .BR fork (2), then any thread in the group can .BR wait (2) for that child. Since Linux 2.5.35, .I flags must also include .B CLONE_SIGHAND if .B CLONE_THREAD is specified (and note that, since Linux 2.6.0-test6, .BR CLONE_SIGHAND also requires .BR CLONE_VM to be included). Signals may be sent to a thread group as a whole (i.e., a TGID) using .BR kill (2), or to a specific thread (i.e., TID) using .BR tgkill (2). Signal dispositions and actions are process-wide: if an unhandled signal is delivered to a thread, then it will affect (terminate, stop, continue, be ignored in) all members of the thread group. Each thread has its own signal mask, as set by .BR sigprocmask (2), but signals can be pending either: for the whole process (i.e., deliverable to any member of the thread group), when sent with .BR kill (2); or for an individual thread, when sent with .BR tgkill (2). A call to .BR sigpending (2) returns a signal set that is the union of the signals pending for the whole process and the signals that are pending for the calling thread. If .BR kill (2) is used to send a signal to a thread group, and the thread group has installed a handler for the signal, then the handler will be invoked in exactly one, arbitrarily selected member of the thread group that has not blocked the signal. If multiple threads in a group are waiting to accept the same signal using .BR sigwaitinfo (2), the kernel will arbitrarily select one of these threads to receive a signal sent using .BR kill (2). .TP .BR CLONE_UNTRACED " (since Linux 2.5.46)" If .B CLONE_UNTRACED is specified, then a tracing process cannot force .B CLONE_PTRACE on this child process. .TP .BR CLONE_VFORK " (since Linux 2.2)" If .B CLONE_VFORK is set, the execution of the calling process is suspended until the child releases its virtual memory resources via a call to .BR execve (2) or .BR _exit (2) (as with .BR vfork (2)). If .B CLONE_VFORK is not set, then both the calling process and the child are schedulable after the call, and an application should not rely on execution occurring in any particular order. .TP .BR CLONE_VM " (since Linux 2.0)" If .B CLONE_VM is set, the calling process and the child process run in the same memory space. In particular, memory writes performed by the calling process or by the child process are also visible in the other process. Moreover, any memory mapping or unmapping performed with .BR mmap (2) or .BR munmap (2) by the child or calling process also affects the other process. If .B CLONE_VM is not set, the child process runs in a separate copy of the memory space of the calling process at the time of .BR clone (). Memory writes or file mappings/unmappings performed by one of the processes do not affect the other, as with .BR fork (2). .SS C library/kernel differences The raw .BR clone () system call corresponds more closely to .BR fork (2) in that execution in the child continues from the point of the call. As such, the .I fn and .I arg arguments of the .BR clone () wrapper function are omitted. Furthermore, the argument order changes. In addition, there are variations across architectures. The raw system call interface on x86-64 and some other architectures (including sh, tile, and alpha) is roughly: .in +4 .nf .BI "long clone(unsigned long " flags ", void *" child_stack , .BI " int *" ptid ", int *" ctid , .BI " unsigned long " newtls ); .fi .in On x86-32, and several other common architectures (including score, ARM, ARM 64, PA-RISC, arc, Power PC, xtensa, and MIPS), .\" CONFIG_CLONE_BACKWARDS the order of the last two arguments is reversed: .in +4 .nf .BI "long clone(unsigned long " flags ", void *" child_stack , .BI " int *" ptid ", unsigned long " newtls , .BI " int *" ctid ); .fi .in On the cris and s390 architectures, .\" CONFIG_CLONE_BACKWARDS2 the order of the first two arguments is reversed: .in +4 .nf .BI "long clone(void *" child_stack ", unsigned long " flags , .BI " int *" ptid ", int *" ctid , .BI " unsigned long " newtls ); .fi .in On the microblaze architecture, .\" CONFIG_CLONE_BACKWARDS3 an additional argument is supplied: .in +4 .nf .BI "long clone(unsigned long " flags ", void *" child_stack , .BI " int " stack_size , "\fR /* Size of stack */" .BI " int *" ptid ", int *" ctid , .BI " unsigned long " newtls ); .fi .in Another difference for the raw system call is that the .I child_stack argument may be zero, in which case copy-on-write semantics ensure that the child gets separate copies of stack pages when either process modifies the stack. In this case, for correct operation, the .B CLONE_VM option should not be specified. .\" .SS blackfin, m68k, and sparc .\" Mike Frysinger noted in a 2013 mail: .\" these arches don't define __ARCH_WANT_SYS_CLONE: .\" blackfin ia64 m68k sparc The argument-passing conventions on blackfin, m68k, and sparc are different from the descriptions above. For details, see the kernel (and glibc) source. .SS ia64 On ia64, a different interface is used: .nf .BI "int __clone2(int (*" "fn" ")(void *), " .BI " void *" child_stack_base ", size_t " stack_size , .BI " int " flags ", void *" "arg" ", ... " .BI " /* pid_t *" ptid ", struct user_desc *" tls \ ", pid_t *" ctid " */ );" .fi .PP The prototype shown above is for the glibc wrapper function; the raw system call interface has no .I fn or .I arg argument, and changes the order of the arguments so that .I flags is the first argument, and .I tls is the last argument. .PP .BR __clone2 () operates in the same way as .BR clone (), except that .I child_stack_base points to the lowest address of the child's stack area, and .I stack_size specifies the size of the stack pointed to by .IR child_stack_base . .SS Linux 2.4 and earlier In Linux 2.4 and earlier, .BR clone () does not take arguments .IR ptid , .IR tls , and .IR ctid . .SH RETURN VALUE .\" gettid(2) returns current->pid; .\" getpid(2) returns current->tgid; On success, the thread ID of the child process is returned in the caller's thread of execution. On failure, \-1 is returned in the caller's context, no child process will be created, and .I errno will be set appropriately. .SH ERRORS .TP .B EAGAIN Too many processes are already running; see .BR fork (2). .TP .B EINVAL .B CLONE_SIGHAND was specified, but .B CLONE_VM was not. (Since Linux 2.6.0-test6.) .TP .B EINVAL .B CLONE_THREAD was specified, but .B CLONE_SIGHAND was not. (Since Linux 2.5.35.) .\" .TP .\" .B EINVAL .\" Precisely one of .\" .B CLONE_DETACHED .\" and .\" .B CLONE_THREAD .\" was specified. .\" (Since Linux 2.6.0-test6.) .TP .B EINVAL .\" commit e66eded8309ebf679d3d3c1f5820d1f2ca332c71 Both .B CLONE_FS and .B CLONE_NEWNS were specified in .IR flags . .TP .BR EINVAL " (since Linux 3.9)" Both .B CLONE_NEWUSER and .B CLONE_FS were specified in .IR flags . .TP .B EINVAL Both .B CLONE_NEWIPC and .B CLONE_SYSVSEM were specified in .IR flags . .TP .B EINVAL One (or both) of .BR CLONE_NEWPID or .BR CLONE_NEWUSER and one (or both) of .BR CLONE_THREAD or .BR CLONE_PARENT were specified in .IR flags . .TP .B EINVAL Returned by the glibc .BR clone () wrapper function when .IR fn or .IR child_stack is specified as NULL. .TP .B EINVAL .BR CLONE_NEWIPC was specified in .IR flags , but the kernel was not configured with the .B CONFIG_SYSVIPC and .BR CONFIG_IPC_NS options. .TP .B EINVAL .BR CLONE_NEWNET was specified in .IR flags , but the kernel was not configured with the .B CONFIG_NET_NS option. .TP .B EINVAL .BR CLONE_NEWPID was specified in .IR flags , but the kernel was not configured with the .B CONFIG_PID_NS option. .TP .B EINVAL .BR CLONE_NEWUTS was specified in .IR flags , but the kernel was not configured with the .B CONFIG_UTS option. .TP .B EINVAL .I child_stack is not aligned to a suitable boundary for this architecture. For example, on aarch64, .I child_stack must be a multiple of 16. .TP .B ENOMEM Cannot allocate sufficient memory to allocate a task structure for the child, or to copy those parts of the caller's context that need to be copied. .TP .B EPERM .BR CLONE_NEWIPC , .BR CLONE_NEWNET , .BR CLONE_NEWNS , .BR CLONE_NEWPID , or .BR CLONE_NEWUTS was specified by an unprivileged process (process without \fBCAP_SYS_ADMIN\fP). .TP .B EPERM .B CLONE_PID was specified by a process other than process 0. .TP .B EPERM .BR CLONE_NEWUSER was specified in .IR flags , but either the effective user ID or the effective group ID of the caller does not have a mapping in the parent namespace (see .BR user_namespaces (7)). .TP .BR EPERM " (since Linux 3.9)" .\" commit 3151527ee007b73a0ebd296010f1c0454a919c7d .B CLONE_NEWUSER was specified in .I flags and the caller is in a chroot environment .\" FIXME What is the rationale for this restriction? (i.e., the caller's root directory does not match the root directory of the mount namespace in which it resides). .TP .BR ERESTARTNOINTR " (since Linux 2.6.17)" .\" commit 4a2c7a7837da1b91468e50426066d988050e4d56 System call was interrupted by a signal and will be restarted. (This can be seen only during a trace.) .TP .BR EUSERS " (since Linux 3.11)" .B CLONE_NEWUSER was specified in .IR flags , and the call would cause the limit on the number of nested user namespaces to be exceeded. See .BR user_namespaces (7). .\" .SH VERSIONS .\" There is no entry for .\" .BR clone () .\" in libc5. .\" glibc2 provides .\" .BR clone () .\" as described in this manual page. .SH CONFORMING TO .BR clone () is Linux-specific and should not be used in programs intended to be portable. .SH NOTES The .BR kcmp (2) system call can be used to test whether two processes share various resources such as a file descriptor table, System V semaphore undo operations, or a virtual address space. Handlers registered using .BR pthread_atfork (3) are not executed during a call to .BR clone (). In the Linux 2.4.x series, .B CLONE_THREAD generally does not make the parent of the new thread the same as the parent of the calling process. However, for kernel versions 2.4.7 to 2.4.18 the .B CLONE_THREAD flag implied the .B CLONE_PARENT flag (as in Linux 2.6.0 and later). For a while there was .B CLONE_DETACHED (introduced in 2.5.32): parent wants no child-exit signal. In Linux 2.6.2, the need to give this flag together with .B CLONE_THREAD disappeared. This flag is still defined, but has no effect. On i386, .BR clone () should not be called through vsyscall, but directly through .IR "int $0x80" . .SH BUGS Versions of the GNU C library that include the NPTL threading library contain a wrapper function for .BR getpid (2) that performs caching of PIDs. This caching relies on support in the glibc wrapper for .BR clone (), but as currently implemented, the cache may not be up to date in some circumstances. In particular, if a signal is delivered to the child immediately after the .BR clone () call, then a call to .BR getpid (2) in a handler for the signal may return the PID of the calling process ("the parent"), if the clone wrapper has not yet had a chance to update the PID cache in the child. (This discussion ignores the case where the child was created using .BR CLONE_THREAD , when .BR getpid (2) .I should return the same value in the child and in the process that called .BR clone (), since the caller and the child are in the same thread group. The stale-cache problem also does not occur if the .I flags argument includes .BR CLONE_VM .) To get the truth, it may be necessary to use code such as the following: .nf #include pid_t mypid; mypid = syscall(SYS_getpid); .fi .\" See also the following bug reports .\" https://bugzilla.redhat.com/show_bug.cgi?id=417521 .\" http://sourceware.org/bugzilla/show_bug.cgi?id=6910 .SH EXAMPLE The following program demonstrates the use of .BR clone () to create a child process that executes in a separate UTS namespace. The child changes the hostname in its UTS namespace. Both parent and child then display the system hostname, making it possible to see that the hostname differs in the UTS namespaces of the parent and child. For an example of the use of this program, see .BR setns (2). .SS Program source .nf #define _GNU_SOURCE #include #include #include #include #include #include #include #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \\ } while (0) static int /* Start function for cloned child */ childFunc(void *arg) { struct utsname uts; /* Change hostname in UTS namespace of child */ if (sethostname(arg, strlen(arg)) == \-1) errExit("sethostname"); /* Retrieve and display hostname */ if (uname(&uts) == \-1) errExit("uname"); printf("uts.nodename in child: %s\\n", uts.nodename); /* Keep the namespace open for a while, by sleeping. This allows some experimentation\-\-for example, another process might join the namespace. */ sleep(200); return 0; /* Child terminates now */ } #define STACK_SIZE (1024 * 1024) /* Stack size for cloned child */ int main(int argc, char *argv[]) { char *stack; /* Start of stack buffer */ char *stackTop; /* End of stack buffer */ pid_t pid; struct utsname uts; if (argc < 2) { fprintf(stderr, "Usage: %s \\n", argv[0]); exit(EXIT_SUCCESS); } /* Allocate stack for child */ stack = malloc(STACK_SIZE); if (stack == NULL) errExit("malloc"); stackTop = stack + STACK_SIZE; /* Assume stack grows downward */ /* Create child that has its own UTS namespace; child commences execution in childFunc() */ pid = clone(childFunc, stackTop, CLONE_NEWUTS | SIGCHLD, argv[1]); if (pid == \-1) errExit("clone"); printf("clone() returned %ld\\n", (long) pid); /* Parent falls through to here */ sleep(1); /* Give child time to change its hostname */ /* Display hostname in parent\(aqs UTS namespace. This will be different from hostname in child\(aqs UTS namespace. */ if (uname(&uts) == \-1) errExit("uname"); printf("uts.nodename in parent: %s\\n", uts.nodename); if (waitpid(pid, NULL, 0) == \-1) /* Wait for child */ errExit("waitpid"); printf("child has terminated\\n"); exit(EXIT_SUCCESS); } .fi .SH SEE ALSO .BR fork (2), .BR futex (2), .BR getpid (2), .BR gettid (2), .BR kcmp (2), .BR set_thread_area (2), .BR set_tid_address (2), .BR setns (2), .BR tkill (2), .BR unshare (2), .BR wait (2), .BR capabilities (7), .BR namespaces (7), .BR pthreads (7) .SH COLOPHON This page is part of release 4.10 of the Linux .I man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at \%https://www.kernel.org/doc/man\-pages/.