NAME¶
fitgrid_params - This document briefly describes all the internal parameters of
Fitgrid.
DESCRIPTION¶
Each entry below includes the name of a parameter, its Fortran type (use the
obvious equivalents for C), its default value, and a short description of the
parameter.
- ´SIG´ - Real - 1.
- Value of the tension factor.
- ´SL1´ - Real - 0.
- The slope of the curve at the first point (see parameter SF1).
- ´SLN´ - Real - 0.
- The slope of the curve at the final point (see parameter SF1).
- ´SF1´ - Integer - 3
- Controls the use of parameters SL1 and SL2: 0=use both; 1=use SL1 only;
2=use SL2 only; 3=use neither.
- ´SF2´ - Integer - 3
- Controls the use of parameters SMT and EPS: 0=use neither; 1=use both;
2=use SMT only; 3=use EPS only.
- ´SMT´ - Real - none
- Smoothing parameter for ftcurvs, ftcurvps, c_ftcurvs, and c_ftcurvps.
- ´EPS´ - Real - none
- Smoothing parameter for ftcurvs, ftcurvps, c_ftcurvs, and c_ftcurvps.
- ´ZX1´ - Real array - none
- X partials at left for ftsurf and c_ftsurf.
- ´ZXM´ - Real array - none
- X partials at right for ftsurf and c_ftsurf.
- ´ZY1´ - Real array - none
- Y partials at bottom for ftsurf and c_ftsurf.
- ´ZYN´ - Real array - none
- Y partials at top for ftsurf and c_ftsurf.
- ´Z11´ - Real - none
- X-Y partial at lower left for ftsurf and c_ftsurf.
- ´ZM1´ - Real - none
- X-Y partial at lower right for ftsurf and c_ftsurf.
- ´Z1N´ - Real - none
- X-Y partial at upper left for ftsurf and c_ftsurf.
- ´ZMN´ - Real - none
- X-Y partial at upper right for ftsurf and c_ftsurf.
- ´DF1´ - Integer - 1
- Flag indicating if ZX1 is user supplied: 0=yes; 1=no.
- ´DF2´ - Integer - 1
- Flag indicating if ZXM is user supplied: 0=yes; 1=no.
- ´DF3´ - Integer - 1
- Flag indicating if ZY1 is user supplied: 0=yes; 1=no.
- ´DF4´ - Integer - 1
- Flag indicating if ZYN is user supplied: 0=yes; 1=no.
- ´DF5´ - Integer - 1
- Flag indicating if Z11 is user supplied: 0=yes; 1=no.
- ´DF6´ - Integer - 1
- Flag indicating if ZM1 is user supplied: 0=yes; 1=no.
- ´DF7´ - Integer - 1
- Flag indicating if Z1M is user supplied: 0=yes; 1=no.
- ´DF8´ - Integer - 1
- Flag indicating if ZMN is user supplied: 0=yes; 1=no.
SEE ALSO¶
fitgrid, fitgrid_params, curv1, curv2, curvd, curvi, curvp1, curvp2, curvpi,
curvs, curvps, kurv1, kurv2, kurvd, kurvp1, kurvp2, kurvpd, surf1, surf2,
c_ftcurv, c_ftcurvd, c_ftcurvi, c_ftcurvp, c_ftcurvpi, c_ftcurvs, c_ftcurvps,
c_ftkurv, c_ftkurvp, c_ftkurvd, c_ftkurvpd, c_ftsurf, c_ftseti, c_ftgeti,
c_ftsetr, c_ftgetr, c_ftsetc, c_ftgetc, c_ftsetfa, c_ftgetfa_size,
c_ftgetfa_data.
Complete documentation for Fitgrid is available at URL
http://ngwww.ucar.edu/ngdoc/ng/ngmath/fitgrid/fithome.html
COPYRIGHT¶
Copyright (C) 2000
University Corporation for Atmospheric Research
The use of this Software is governed by a License Agreement.
