table of contents
other versions
- jessie 1:2.1.4-2.1+deb8u6
- jessie-backports 1:2.11.0-3~bpo8+1
- stretch 1:2.11.0-3+deb9u4
- testing 1:2.20.1-2
- stretch-backports 1:2.20.1-1~bpo9+1
- unstable 1:2.20.1-2
- experimental 1:2.21.0+next.20190320-1
GIT-REV-LIST(1) | Git Manual | GIT-REV-LIST(1) |
NAME¶
git-rev-list - Lists commit objects in reverse chronological orderSYNOPSIS¶
git rev-list [ --max-count=<number> ] [ --skip=<number> ] [ --max-age=<timestamp> ] [ --min-age=<timestamp> ] [ --sparse ] [ --merges ] [ --no-merges ] [ --min-parents=<number> ] [ --no-min-parents ] [ --max-parents=<number> ] [ --no-max-parents ] [ --first-parent ] [ --remove-empty ] [ --full-history ] [ --not ] [ --all ] [ --branches[=<pattern>] ] [ --tags[=<pattern>] ] [ --remotes[=<pattern>] ] [ --glob=<glob-pattern> ] [ --ignore-missing ] [ --stdin ] [ --quiet ] [ --topo-order ] [ --parents ] [ --timestamp ] [ --left-right ] [ --left-only ] [ --right-only ] [ --cherry-mark ] [ --cherry-pick ] [ --encoding=<encoding> ] [ --(author|committer|grep)=<pattern> ] [ --regexp-ignore-case | -i ] [ --extended-regexp | -E ] [ --fixed-strings | -F ] [ --date=<format>] [ [ --objects | --objects-edge | --objects-edge-aggressive ] [ --unpacked ] ] [ --pretty | --header ] [ --bisect ] [ --bisect-vars ] [ --bisect-all ] [ --merge ] [ --reverse ] [ --walk-reflogs ] [ --no-walk ] [ --do-walk ] [ --count ] [ --use-bitmap-index ] <commit>... [ -- <paths>... ]
DESCRIPTION¶
List commits that are reachable by following the parent links from the given commit(s), but exclude commits that are reachable from the one(s) given with a ^ in front of them. The output is given in reverse chronological order by default. You can think of this as a set operation. Commits given on the command line form a set of commits that are reachable from any of them, and then commits reachable from any of the ones given with ^ in front are subtracted from that set. The remaining commits are what comes out in the command’s output. Various other options and paths parameters can be used to further limit the result. Thus, the following command:$ git rev-list foo bar ^baz
$ git rev-list origin..HEAD $ git rev-list HEAD ^origin
$ git rev-list A B --not $(git merge-base --all A B) $ git rev-list A...B
OPTIONS¶
Commit Limiting¶
Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit limiting may be applied. Using more options generally further limits the output (e.g. --since=<date1> limits to commits newer than <date1>, and using it with --grep=<pattern> further limits to commits whose log message has a line that matches <pattern>), unless otherwise noted. Note that these are applied before commit ordering and formatting options, such as --reverse. -<number>, -n <number>, --max-count=<number>Limit the number of commits to output.
--skip=<number>
Skip number commits before starting to show the
commit output.
--since=<date>, --after=<date>
Show commits more recent than a specific date.
--until=<date>, --before=<date>
Show commits older than a specific date.
--max-age=<timestamp>, --min-age=<timestamp>
Limit the commits output to specified time range.
--author=<pattern>, --committer=<pattern>
Limit the commits output to ones with author/committer
header lines that match the specified pattern (regular expression). With more
than one --author=<pattern>, commits whose author matches any of
the given patterns are chosen (similarly for multiple
--committer=<pattern>).
--grep-reflog=<pattern>
Limit the commits output to ones with reflog entries that
match the specified pattern (regular expression). With more than one
--grep-reflog, commits whose reflog message matches any of the given
patterns are chosen. It is an error to use this option unless
--walk-reflogs is in use.
--grep=<pattern>
Limit the commits output to ones with log message that
matches the specified pattern (regular expression). With more than one
--grep=<pattern>, commits whose message matches any of the given
patterns are chosen (but see --all-match).
--all-match
Limit the commits output to ones that match all given
--grep, instead of ones that match at least one.
--invert-grep
Limit the commits output to ones with log message that do
not match the pattern specified with --grep=<pattern>.
-i, --regexp-ignore-case
Match the regular expression limiting patterns without
regard to letter case.
--basic-regexp
Consider the limiting patterns to be basic regular
expressions; this is the default.
-E, --extended-regexp
Consider the limiting patterns to be extended regular
expressions instead of the default basic regular expressions.
-F, --fixed-strings
Consider the limiting patterns to be fixed strings
(don’t interpret pattern as a regular expression).
--perl-regexp
Consider the limiting patterns to be Perl-compatible
regular expressions. Requires libpcre to be compiled in.
--remove-empty
Stop when a given path disappears from the tree.
--merges
Print only merge commits. This is exactly the same as
--min-parents=2.
--no-merges
Do not print commits with more than one parent. This is
exactly the same as --max-parents=1.
--min-parents=<number>, --max-parents=<number>, --no-min-parents,
--no-max-parents
Show only commits which have at least (or at most) that
many parent commits. In particular, --max-parents=1 is the same as
--no-merges, --min-parents=2 is the same as --merges.
--max-parents=0 gives all root commits and --min-parents=3 all
octopus merges.
--no-min-parents and --no-max-parents reset these limits (to no
limit) again. Equivalent forms are --min-parents=0 (any commit has 0 or
more parents) and --max-parents=-1 (negative numbers denote no upper
limit).
--first-parent
Follow only the first parent commit upon seeing a merge
commit. This option can give a better overview when viewing the evolution of a
particular topic branch, because merges into a topic branch tend to be only
about adjusting to updated upstream from time to time, and this option allows
you to ignore the individual commits brought in to your history by such a
merge. Cannot be combined with --bisect.
--not
Reverses the meaning of the ^ prefix (or lack
thereof) for all following revision specifiers, up to the next
--not.
--all
Pretend as if all the refs in refs/ are listed on
the command line as <commit>.
--branches[=<pattern>]
Pretend as if all the refs in refs/heads are
listed on the command line as <commit>. If <pattern>
is given, limit branches to ones matching given shell glob. If pattern lacks
?, *, or [, /* at the end is implied.
--tags[=<pattern>]
Pretend as if all the refs in refs/tags are listed
on the command line as <commit>. If <pattern> is
given, limit tags to ones matching given shell glob. If pattern lacks
?, *, or [, /* at the end is implied.
--remotes[=<pattern>]
Pretend as if all the refs in refs/remotes are
listed on the command line as <commit>. If <pattern>
is given, limit remote-tracking branches to ones matching given shell glob. If
pattern lacks ?, *, or [, /* at the end is
implied.
--glob=<glob-pattern>
Pretend as if all the refs matching shell glob
<glob-pattern> are listed on the command line as
<commit>. Leading refs/, is automatically prepended if
missing. If pattern lacks ?, *, or [, /* at the
end is implied.
--exclude=<glob-pattern>
Do not include refs matching <glob-pattern>
that the next --all, --branches, --tags,
--remotes, or --glob would otherwise consider. Repetitions of
this option accumulate exclusion patterns up to the next --all,
--branches, --tags, --remotes, or --glob option
(other options or arguments do not clear accumulated patterns).
The patterns given should not begin with refs/heads, refs/tags, or
refs/remotes when applied to --branches, --tags, or
--remotes, respectively, and they must begin with refs/ when
applied to --glob or --all. If a trailing /* is intended,
it must be given explicitly.
--reflog
Pretend as if all objects mentioned by reflogs are listed
on the command line as <commit>.
--ignore-missing
Upon seeing an invalid object name in the input, pretend
as if the bad input was not given.
--stdin
In addition to the <commit> listed on the
command line, read them from the standard input. If a -- separator is
seen, stop reading commits and start reading paths to limit the result.
--quiet
Don’t print anything to standard output. This form
is primarily meant to allow the caller to test the exit status to see if a
range of objects is fully connected (or not). It is faster than redirecting
stdout to /dev/null as the output does not have to be formatted.
--cherry-mark
Like --cherry-pick (see below) but mark equivalent
commits with = rather than omitting them, and inequivalent ones with
+.
--cherry-pick
Omit any commit that introduces the same change as
another commit on the “other side” when the set of commits are
limited with symmetric difference.
For example, if you have two branches, A and B, a usual way to
list all commits on only one side of them is with --left-right (see the
example below in the description of the --left-right option). However,
it shows the commits that were cherry-picked from the other branch (for
example, “3rd on b” may be cherry-picked from branch A). With
this option, such pairs of commits are excluded from the output.
--left-only, --right-only
List only commits on the respective side of a symmetric
difference, i.e. only those which would be marked < resp.
> by --left-right.
For example, --cherry-pick --right-only A...B omits those commits from
B which are in A or are patch-equivalent to a commit in
A. In other words, this lists the + commits from git cherry A
B. More precisely, --cherry-pick --right-only --no-merges gives the
exact list.
--cherry
A synonym for --right-only --cherry-mark
--no-merges; useful to limit the output to the commits on our side and
mark those that have been applied to the other side of a forked history with
git log --cherry upstream...mybranch, similar to git cherry upstream
mybranch.
-g, --walk-reflogs
Instead of walking the commit ancestry chain, walk reflog
entries from the most recent one to older ones. When this option is used you
cannot specify commits to exclude (that is, ^commit,
commit1..commit2, and commit1...commit2 notations cannot be
used).
With --pretty format other than oneline (for obvious reasons),
this causes the output to have two extra lines of information taken from the
reflog. The reflog designator in the output may be shown as ref@{Nth}
(where Nth is the reverse-chronological index in the reflog) or as
ref@{timestamp} (with the timestamp for that entry), depending on a few
rules:
--merge
1.If the starting point is specified as
ref@{Nth}, show the index format.
2.If the starting point was specified as
ref@{now}, show the timestamp format.
3.If neither was used, but --date was given on
the command line, show the timestamp in the format requested by
--date.
4.Otherwise, show the index format.
Under --pretty=oneline, the commit message is prefixed with this
information on the same line. This option cannot be combined with
--reverse. See also git-reflog(1).After a failed merge, show refs that touch files having a
conflict and don’t exist on all heads to merge.
--boundary
Output excluded boundary commits. Boundary commits are
prefixed with -.
--use-bitmap-index
Try to speed up the traversal using the pack bitmap index
(if one is available). Note that when traversing with --objects, trees
and blobs will not have their associated path printed.
--progress=<header>
Show progress reports on stderr as objects are
considered. The <header> text will be printed with each progress
update.
History Simplification¶
Sometimes you are only interested in parts of the history, for example the commits modifying a particular <path>. But there are two parts of History Simplification, one part is selecting the commits and the other is how to do it, as there are various strategies to simplify the history. The following options select the commits to be shown: <paths>Commits modifying the given <paths> are
selected.
--simplify-by-decoration
Commits that are referred by some branch or tag are
selected.
Note that extra commits can be shown to give a meaningful history.
The following options affect the way the simplification is performed:
Default mode
Simplifies the history to the simplest history explaining
the final state of the tree. Simplest because it prunes some side branches if
the end result is the same (i.e. merging branches with the same content)
--full-history
Same as the default mode, but does not prune some
history.
--dense
Only the selected commits are shown, plus some to have a
meaningful history.
--sparse
All commits in the simplified history are shown.
--simplify-merges
Additional option to --full-history to remove some
needless merges from the resulting history, as there are no selected commits
contributing to this merge.
--ancestry-path
When given a range of commits to display (e.g.
commit1..commit2 or commit2 ^commit1), only display commits that
exist directly on the ancestry chain between the commit1 and
commit2, i.e. commits that are both descendants of commit1, and
ancestors of commit2.
A more detailed explanation follows.
Suppose you specified foo as the <paths>. We shall call commits
that modify foo !TREESAME, and the rest TREESAME. (In a diff filtered
for foo, they look different and equal, respectively.)
In the following, we will always refer to the same example history to illustrate
the differences between simplification settings. We assume that you are
filtering for a file foo in this commit graph:
.-A---M---N---O---P---Q / / / / / / I B C D E Y \ / / / / / `-------------' X
•I is the initial commit, in which
foo exists with contents “asdf”, and a file quux
exists with contents “quux”. Initial commits are compared to an
empty tree, so I is !TREESAME.
•In A, foo contains just
“foo”.
•B contains the same change as A.
Its merge M is trivial and hence TREESAME to all parents.
•C does not change foo, but its
merge N changes it to “foobar”, so it is not TREESAME to
any parent.
•D sets foo to “baz”.
Its merge O combines the strings from N and D to
“foobarbaz”; i.e., it is not TREESAME to any parent.
•E changes quux to
“xyzzy”, and its merge P combines the strings to
“quux xyzzy”. P is TREESAME to O, but not to
E.
•X is an independent root commit that added
a new file side, and Y modified it. Y is TREESAME to
X. Its merge Q added side to P, and Q is
TREESAME to P, but not to Y.
rev-list walks backwards through history, including or excluding commits
based on whether --full-history and/or parent rewriting (via
--parents or --children) are used. The following settings are
available.
Default mode
Commits are included if they are not TREESAME to any
parent (though this can be changed, see --sparse below). If the commit
was a merge, and it was TREESAME to one parent, follow only that parent. (Even
if there are several TREESAME parents, follow only one of them.) Otherwise,
follow all parents.
This results in:
Note how the rule to only follow the TREESAME parent, if one is available,
removed B from consideration entirely. C was considered via
N, but is TREESAME. Root commits are compared to an empty tree, so
I is !TREESAME.
Parent/child relations are only visible with --parents, but that does not
affect the commits selected in default mode, so we have shown the parent
lines.
--full-history without parent rewriting
.-A---N---O / / / I---------D
This mode differs from the default in one point: always
follow all parents of a merge, even if it is TREESAME to one of them. Even if
more than one side of the merge has commits that are included, this does not
imply that the merge itself is! In the example, we get
M was excluded because it is TREESAME to both parents. E, C
and B were all walked, but only B was !TREESAME, so the others
do not appear.
Note that without parent rewriting, it is not really possible to talk about the
parent/child relationships between the commits, so we show them
disconnected.
--full-history with parent rewriting
I A B N D O P Q
Ordinary commits are only included if they are !TREESAME
(though this can be changed, see --sparse below).
Merges are always included. However, their parent list is rewritten: Along each
parent, prune away commits that are not included themselves. This results in
Compare to --full-history without rewriting above. Note that E was
pruned away because it is TREESAME, but the parent list of P was rewritten to
contain E's parent I. The same happened for C and
N, and X, Y and Q.
In addition to the above settings, you can change whether TREESAME affects
inclusion:
--dense
.-A---M---N---O---P---Q / / / / / I B / D / \ / / / / `-------------'
Commits that are walked are included if they are not
TREESAME to any parent.
--sparse
All commits that are walked are included.
Note that without --full-history, this still simplifies merges: if one of
the parents is TREESAME, we follow only that one, so the other sides of the
merge are never walked.
--simplify-merges
First, build a history graph in the same way that
--full-history with parent rewriting does (see above).
Then simplify each commit C to its replacement C' in the final
history according to the following rules:
Note the major differences in N, P, and Q over
--full-history:
Finally, there is a fifth simplification mode available:
--ancestry-path
•Set C' to C.
•Replace each parent P of C' with
its simplification P'. In the process, drop parents that are ancestors
of other parents or that are root commits TREESAME to an empty tree, and
remove duplicates, but take care to never drop all parents that we are
TREESAME to.
•If after this parent rewriting, C' is a
root or merge commit (has zero or >1 parents), a boundary commit, or
!TREESAME, it remains. Otherwise, it is replaced with its only parent.
The effect of this is best shown by way of comparing to --full-history
with parent rewriting. The example turns into:
.-A---M---N---O / / / I B D \ / / `---------'
•N's parent list had I removed,
because it is an ancestor of the other parent M. Still, N
remained because it is !TREESAME.
•P's parent list similarly had I
removed. P was then removed completely, because it had one parent and
is TREESAME.
•Q's parent list had Y simplified to
X. X was then removed, because it was a TREESAME root. Q
was then removed completely, because it had one parent and is TREESAME.
Limit the displayed commits to those directly on the
ancestry chain between the “from” and “to” commits
in the given commit range. I.e. only display commits that are ancestor of the
“to” commit and descendants of the “from” commit.
As an example use case, consider the following commit history:
A regular D..M computes the set of commits that are ancestors of
M, but excludes the ones that are ancestors of D. This is useful
to see what happened to the history leading to M since D, in the
sense that “what does M have that did not exist in
D”. The result in this example would be all the commits, except
A and B (and D itself, of course).
When we want to find out what commits in M are contaminated with the bug
introduced by D and need fixing, however, we might want to view only
the subset of D..M that are actually descendants of D, i.e.
excluding C and K. This is exactly what the
--ancestry-path option does. Applied to the D..M range, it
results in:
The --simplify-by-decoration option allows you to view only the big
picture of the topology of the history, by omitting commits that are not
referenced by tags. Commits are marked as !TREESAME (in other words, kept
after history simplification rules described above) if (1) they are referenced
by tags, or (2) they change the contents of the paths given on the command
line. All other commits are marked as TREESAME (subject to be simplified
away).
D---E-------F / \ \ B---C---G---H---I---J / \ A-------K---------------L--M
E-------F \ \ G---H---I---J \ L--M
Bisection Helpers¶
--bisectLimit output to the one commit object which is roughly
halfway between included and excluded commits. Note that the bad bisection ref
refs/bisect/bad is added to the included commits (if it exists) and the
good bisection refs refs/bisect/good-* are added to the excluded
commits (if they exist). Thus, supposing there are no refs in
refs/bisect/, if
outputs midpoint, the output of the two commands
would be of roughly the same length. Finding the change which introduces a
regression is thus reduced to a binary search: repeatedly generate and test
new 'midpoint’s until the commit chain is of length one. Cannot be
combined with --first-parent.
--bisect-vars
$ git rev-list --bisect foo ^bar ^baz
$ git rev-list foo ^midpoint $ git rev-list midpoint ^bar ^baz
This calculates the same as --bisect, except that
refs in refs/bisect/ are not used, and except that this outputs text
ready to be eval’ed by the shell. These lines will assign the name of
the midpoint revision to the variable bisect_rev, and the expected
number of commits to be tested after bisect_rev is tested to
bisect_nr, the expected number of commits to be tested if
bisect_rev turns out to be good to bisect_good, the expected
number of commits to be tested if bisect_rev turns out to be bad to
bisect_bad, and the number of commits we are bisecting right now to
bisect_all.
--bisect-all
This outputs all the commit objects between the included
and excluded commits, ordered by their distance to the included and excluded
commits. Refs in refs/bisect/ are not used. The farthest from them is
displayed first. (This is the only one displayed by --bisect.)
This is useful because it makes it easy to choose a good commit to test when you
want to avoid to test some of them for some reason (they may not compile for
example).
This option can be used along with --bisect-vars, in this case, after all
the sorted commit objects, there will be the same text as if
--bisect-vars had been used alone.
Commit Ordering¶
By default, the commits are shown in reverse chronological order. --date-orderShow no parents before all of its children are shown, but
otherwise show commits in the commit timestamp order.
--author-date-order
Show no parents before all of its children are shown, but
otherwise show commits in the author timestamp order.
--topo-order
Show no parents before all of its children are shown, and
avoid showing commits on multiple lines of history intermixed.
For example, in a commit history like this:
where the numbers denote the order of commit timestamps, git rev-list and
friends with --date-order show the commits in the timestamp order: 8 7
6 5 4 3 2 1.
With --topo-order, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 3 1);
some older commits are shown before newer ones in order to avoid showing the
commits from two parallel development track mixed together.
--reverse
---1----2----4----7 \ \ 3----5----6----8---
Output the commits chosen to be shown (see Commit
Limiting section above) in reverse order. Cannot be combined with
--walk-reflogs.
Object Traversal¶
These options are mostly targeted for packing of Git repositories. --objectsPrint the object IDs of any object referenced by the
listed commits. --objects foo ^bar thus means “send me all
object IDs which I need to download if I have the commit object bar but
not foo”.
--objects-edge
Similar to --objects, but also print the IDs of
excluded commits prefixed with a “-” character. This is used by
git-pack-objects(1) to build a “thin” pack, which records
objects in deltified form based on objects contained in these excluded commits
to reduce network traffic.
--objects-edge-aggressive
Similar to --objects-edge, but it tries harder to
find excluded commits at the cost of increased time. This is used instead of
--objects-edge to build “thin” packs for shallow
repositories.
--indexed-objects
Pretend as if all trees and blobs used by the index are
listed on the command line. Note that you probably want to use
--objects, too.
--unpacked
Only useful with --objects; print the object IDs
that are not in packs.
--no-walk[=(sorted|unsorted)]
Only show the given commits, but do not traverse their
ancestors. This has no effect if a range is specified. If the argument
unsorted is given, the commits are shown in the order they were given
on the command line. Otherwise (if sorted or no argument was given),
the commits are shown in reverse chronological order by commit time. Cannot be
combined with --graph.
--do-walk
Overrides a previous --no-walk.
Commit Formatting¶
Using these options, git-rev-list(1) will act similar to the more specialized family of commit log tools: git-log(1), git-show(1), and git-whatchanged(1) --pretty[=<format>], --format=<format>Pretty-print the contents of the commit logs in a given
format, where <format> can be one of oneline,
short, medium, full, fuller, email,
raw, format:<string> and tformat:<string>.
When <format> is none of the above, and has %placeholder
in it, it acts as if --pretty=tformat:<format> were given.
See the "PRETTY FORMATS" section for some additional details for each
format. When =<format> part is omitted, it defaults to
medium.
Note: you can specify the default pretty format in the repository configuration
(see git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit
object name, show only a partial prefix. Non default number of digits can be
specified with "--abbrev=<n>" (which also modifies diff
output, if it is displayed).
This should make "--pretty=oneline" a whole lot more readable for
people using 80-column terminals.
--no-abbrev-commit
Show the full 40-byte hexadecimal commit object name.
This negates --abbrev-commit and those options which imply it such as
"--oneline". It also overrides the log.abbrevCommit
variable.
--oneline
This is a shorthand for "--pretty=oneline
--abbrev-commit" used together.
--encoding=<encoding>
The commit objects record the encoding used for the log
message in their encoding header; this option can be used to tell the command
to re-code the commit log message in the encoding preferred by the user. For
non plumbing commands this defaults to UTF-8. Note that if an object claims to
be encoded in X and we are outputting in X, we will output the
object verbatim; this means that invalid sequences in the original commit may
be copied to the output.
--expand-tabs=<n>, --expand-tabs, --no-expand-tabs
Perform a tab expansion (replace each tab with enough
spaces to fill to the next display column that is multiple of
<n>) in the log message before showing it in the output.
--expand-tabs is a short-hand for --expand-tabs=8, and
--no-expand-tabs is a short-hand for --expand-tabs=0, which
disables tab expansion.
By default, tabs are expanded in pretty formats that indent the log message by 4
spaces (i.e. medium, which is the default, full, and
fuller).
--show-signature
Check the validity of a signed commit object by passing
the signature to gpg --verify and show the output.
--relative-date
Synonym for --date=relative.
--date=<format>
Only takes effect for dates shown in human-readable
format, such as when using --pretty. log.date config variable
sets a default value for the log command’s --date option. By
default, dates are shown in the original time zone (either committer’s
or author’s). If -local is appended to the format (e.g.,
iso-local), the user’s local time zone is used instead.
--date=relative shows dates relative to the current time, e.g. “2
hours ago”. The -local option has no effect for
--date=relative.
--date=local is an alias for --date=default-local.
--date=iso (or --date=iso8601) shows timestamps in a ISO 8601-like
format. The differences to the strict ISO 8601 format are:
--header
•a space instead of the T date/time
delimiter
•a space between time and time zone
•no colon between hours and minutes of the time
zone
--date=iso-strict (or --date=iso8601-strict) shows timestamps in
strict ISO 8601 format.
--date=rfc (or --date=rfc2822) shows timestamps in RFC 2822
format, often found in email messages.
--date=short shows only the date, but not the time, in YYYY-MM-DD
format.
--date=raw shows the date as seconds since the epoch (1970-01-01 00:00:00
UTC), followed by a space, and then the timezone as an offset from UTC (a
+ or - with four digits; the first two are hours, and the second
two are minutes). I.e., as if the timestamp were formatted with
strftime("%s %z")). Note that the -local option does
not affect the seconds-since-epoch value (which is always measured in UTC),
but does switch the accompanying timezone value.
--date=unix shows the date as a Unix epoch timestamp (seconds since
1970). As with --raw, this is always in UTC and therefore -local
has no effect.
--date=format:... feeds the format ... to your system
strftime. Use --date=format:%c to show the date in your system
locale’s preferred format. See the strftime manual for a
complete list of format placeholders. When using -local, the correct
syntax is --date=format-local:....
--date=default is the default format, and is similar to
--date=rfc2822, with a few exceptions:
•there is no comma after the day-of-week
•the time zone is omitted when the local time zone
is used
Print the contents of the commit in raw-format; each
record is separated with a NUL character.
--parents
Print also the parents of the commit (in the form
"commit parent..."). Also enables parent rewriting, see History
Simplification below.
--children
Print also the children of the commit (in the form
"commit child..."). Also enables parent rewriting, see History
Simplification below.
--timestamp
Print the raw commit timestamp.
--left-right
Mark which side of a symmetric difference a commit is
reachable from. Commits from the left side are prefixed with < and
those from the right with >. If combined with --boundary,
those commits are prefixed with -.
For example, if you have this topology:
you would get an output like this:
--graph
y---b---b branch B / \ / / . / / \ o---x---a---a branch A
$ git rev-list --left-right --boundary --pretty=oneline A...B >bbbbbbb... 3rd on b >bbbbbbb... 2nd on b <aaaaaaa... 3rd on a <aaaaaaa... 2nd on a -yyyyyyy... 1st on b -xxxxxxx... 1st on a
Draw a text-based graphical representation of the commit
history on the left hand side of the output. This may cause extra lines to be
printed in between commits, in order for the graph history to be drawn
properly. Cannot be combined with --no-walk.
This enables parent rewriting, see History Simplification below.
This implies the --topo-order option by default, but the
--date-order option may also be specified.
--show-linear-break[=<barrier>]
When --graph is not used, all history branches are
flattened which can make it hard to see that the two consecutive commits do
not belong to a linear branch. This option puts a barrier in between them in
that case. If <barrier> is specified, it is the string that will
be shown instead of the default one.
--count
Print a number stating how many commits would have been
listed, and suppress all other output. When used together with
--left-right, instead print the counts for left and right commits,
separated by a tab. When used together with --cherry-mark, omit patch
equivalent commits from these counts and print the count for equivalent
commits separated by a tab.
PRETTY FORMATS¶
If the commit is a merge, and if the pretty-format is not oneline, email or raw, an additional line is inserted before the Author: line. This line begins with "Merge: " and the sha1s of ancestral commits are printed, separated by spaces. Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: for example, if you are only interested in changes related to a certain directory or file. There are several built-in formats, and you can define additional formats by setting a pretty.<name> config option to either another format name, or a format: string, as described below (see git-config(1)). Here are the details of the built-in formats:•oneline
This is designed to be as compact as possible.
<sha1> <title line>
•short
commit <sha1> Author: <author>
<title line>
•medium
commit <sha1> Author: <author> Date: <author date>
<title line>
<full commit message>
•full
commit <sha1> Author: <author> Commit: <committer>
<title line>
<full commit message>
•fuller
commit <sha1> Author: <author> AuthorDate: <author date> Commit: <committer> CommitDate: <committer date>
<title line>
<full commit message>
•email
From <sha1> <date> From: <author> Date: <author date> Subject: [PATCH] <title line>
<full commit message>
•raw
The raw format shows the entire commit exactly as stored in the commit
object. Notably, the SHA-1s are displayed in full, regardless of whether
--abbrev or --no-abbrev are used, and parents information show the true
parent commits, without taking grafts or history simplification into account.
Note that this format affects the way commits are displayed, but not the way
the diff is shown e.g. with git log --raw. To get full object names in
a raw diff format, use --no-abbrev.
•format:<string>
The format:<string> format allows you to specify which information
you want to show. It works a little bit like printf format, with the notable
exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was
>>%s<<%n" would show something like this:
The placeholders are:
The author of fe6e0ee was Junio C Hamano, 23 hours ago The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
•%H: commit hash
•%h: abbreviated commit hash
•%T: tree hash
•%t: abbreviated tree hash
•%P: parent hashes
•%p: abbreviated parent hashes
•%an: author name
•%aN: author name (respecting .mailmap, see
git-shortlog(1) or git-blame(1))
•%ae: author email
•%aE: author email (respecting .mailmap,
see git-shortlog(1) or git-blame(1))
•%ad: author date (format respects --date=
option)
•%aD: author date, RFC2822 style
•%ar: author date, relative
•%at: author date, UNIX timestamp
•%ai: author date, ISO 8601-like
format
•%aI: author date, strict ISO 8601
format
•%cn: committer name
•%cN: committer name (respecting .mailmap,
see git-shortlog(1) or git-blame(1))
•%ce: committer email
•%cE: committer email (respecting .mailmap,
see git-shortlog(1) or git-blame(1))
•%cd: committer date (format respects
--date= option)
•%cD: committer date, RFC2822 style
•%cr: committer date, relative
•%ct: committer date, UNIX timestamp
•%ci: committer date, ISO 8601-like
format
•%cI: committer date, strict ISO 8601
format
•%d: ref names, like the --decorate option
of git-log(1)
•%D: ref names without the " (",
")" wrapping.
•%e: encoding
•%s: subject
•%f: sanitized subject line, suitable for a
filename
•%b: body
•%B: raw body (unwrapped subject and
body)
•%GG: raw verification message from GPG for
a signed commit
•%G?: show "G" for a good (valid)
signature, "B" for a bad signature, "U" for a good
signature with unknown validity, "X" for a good signature that has
expired, "Y" for a good signature made by an expired key,
"R" for a good signature made by a revoked key, "E" if the
signature cannot be checked (e.g. missing key) and "N" for no
signature
•%GS: show the name of the signer for a
signed commit
•%GK: show the key used to sign a signed
commit
•%gD: reflog selector, e.g.,
refs/stash@{1} or refs/stash@{2 minutes ago}; the format follows
the rules described for the -g option. The portion before the @
is the refname as given on the command line (so git log -g
refs/heads/master would yield refs/heads/master@{0}).
•%gd: shortened reflog selector; same as
%gD, but the refname portion is shortened for human readability (so
refs/heads/master becomes just master).
•%gn: reflog identity name
•%gN: reflog identity name (respecting
.mailmap, see git-shortlog(1) or git-blame(1))
•%ge: reflog identity email
•%gE: reflog identity email (respecting
.mailmap, see git-shortlog(1) or git-blame(1))
•%gs: reflog subject
•%Cred: switch color to red
•%Cgreen: switch color to green
•%Cblue: switch color to blue
•%Creset: reset color
•%C(...): color specification, as described
under Values in the "CONFIGURATION FILE" section of
git-config(1); adding auto, at the beginning will emit color
only when colors are enabled for log output (by color.diff,
color.ui, or --color, and respecting the auto settings of
the former if we are going to a terminal). auto alone (i.e.
%C(auto)) will turn on auto coloring on the next placeholders until the
color is switched again.
•%m: left (<), right
(>) or boundary ( -) mark
•%n: newline
•%%: a raw %
•%x00: print a byte from a hex code
•%w([<w>[,<i1>[,<i2>]]]):
switch line wrapping, like the -w option of git-shortlog(1).
•%<(<N>[,trunc|ltrunc|mtrunc]):
make the next placeholder take at least N columns, padding spaces on the right
if necessary. Optionally truncate at the beginning (ltrunc), the middle
(mtrunc) or the end (trunc) if the output is longer than N columns. Note that
truncating only works correctly with N >= 2.
•%<|(<N>): make the next
placeholder take at least until Nth columns, padding spaces on the right if
necessary
•%>(<N>),
%>|(<N>): similar to %<(<N>),
%<|(<N>) respectively, but padding spaces on the left
•%>>(<N>),
%>>|(<N>): similar to %>(<N>),
%>|(<N>) respectively, except that if the next placeholder
takes more spaces than given and there are spaces on its left, use those
spaces
•%><(<N>),
%><|(<N>): similar to % <(<N>),
%<|(<N>) respectively, but padding both sides (i.e. the text
is centered)
•tformat:
The tformat: format works exactly like format:, except that it
provides "terminator" semantics instead of "separator"
semantics. In other words, each commit has the message terminator character
(usually a newline) appended, rather than a separator placed between entries.
This means that the final entry of a single-line format will be properly
terminated with a new line, just as the "oneline" format does. For
example:
In addition, any unrecognized string that has a % in it is interpreted as
if it has tformat: in front of it. For example, these two are
equivalent:
$ git log -2 --pretty=format:%h 4da45bef \ | perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/' 4da45be 7134973 -- NO NEWLINE $ git log -2 --pretty=tformat:%h 4da45bef \ | perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/' 4da45be 7134973
$ git log -2 --pretty=tformat:%h 4da45bef $ git log -2 --pretty=%h 4da45bef
GIT¶
Part of the git(1) suite05/15/2017 | Git 2.11.0 |