NAME¶
fence_raritan - I/O Fencing agent for Raritan Dominion PX
DESCRIPTION¶
fence_raritan is an I/O Fencing agent which can be used with the Raritan
DPXS12-20 Power Distribution Unit. It logs into device via telnet and reboots
a specified outlet. Lengthy telnet connections should be avoided while a GFS
cluster is running because the connection will block any necessary fencing
actions.
fence_raritan accepts options on the command line as well as from stdin. Fenced
sends parameters through stdin when it execs the agent. fence_raritan can be
run by itself with command line options. This is useful for testing and for
turning outlets on or off from scripts.
Vendor URL:
http://www.raritan.com/
PARAMETERS¶
- -o, --action=[action]
- Fencing action (Default Value: reboot)
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device This parameter is always
required.
- -u, --ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 23)
- -l, --username=[name]
- Login name This parameter is always required.
- -p, --password=[password]
- Login password or passphrase
- -S, --password-script=[script]
- Script to run to retrieve password
- -n, --plug=[id]
- Physical plug number on device, UUID or identification of machine This
parameter is always required.
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug logging to
syslog.
- -v, --verbose
- Verbose mode
- -D, --debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- -C, --separator=[char]
- Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --telnet-path=[path]
- Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS¶
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for
more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state
if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- validate-all
- Validate if all required parameters are entered.
STDIN PARAMETERS¶
- action
- Fencing action (Default Value: reboot)
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ipaddr
- IP address or hostname of fencing device This parameter is always
required.
- ipport
- TCP/UDP port to use for connection with device (Default Value: 23)
- login
- Login name This parameter is always required.
- passwd
- Login password or passphrase
- passwd_script
- Script to run to retrieve password
- port
- Physical plug number on device, UUID or identification of machine This
parameter is always required.
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug logging to
syslog.
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- separator
- Separator for CSV created by 'list' operation (Default Value: ,)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- telnet_path
- Path to telnet binary (Default Value: /usr/bin/telnet)