NAME¶
airspy_rx - probe device and show configuration
DESCRIPTION¶
The Airspy is a tiny and efficient software defined radio receiver.
This application lets the user probe the device and show configuration.
SYNOPSIS¶
airspy_rx
OPTIONS¶
- -r <filename> # Receive data into file.
- -w # Receive data into file with WAV header and automatic name.
- [-s sn] # -s serial_number_64bits]: Open device with specified 64bits
serial number
- # This is for SDR# compatibility and may not work with other
software.
- [-p packing] # Set packing for samples. 1=enabled(12bits packed),
0=disabled(default 16bits not packed)
- [-f set_freq_hz] # Set Freq in Hz between [24MHz, 1750MHz].
- [-a sample_rate] # Set sample rate (10 and 2.5 MSPS for older firmware
versions.)
- [-t sample_type] # Set sample type, 0=FLOAT32_IQ, 1=FLOAT32_REAL,
2=INT16_IQ(default), 3=INT16_REAL, 4=U16_REAL
- [-b biast] # Set Bias Tee, 1=enabled, 0=disabled(default)
- [-v gain] # Set VGA gain, 0-15 (default 0)
- [-m gain] # Set Mixer gain, 0-15 (default 8)
- [-l gain] # Set LNA gain, 0-14 (default 8)
- [-n num_samples] # Number of samples to transfer (default is
unlimited).
- -d # Verbose mode.
SEE ALSO¶
Airspy web page:
http://airspy.com/
Other airspy programs:
airspy_info(1),
airspy_si5351c(1),
airspy_spiflash(1),
airspy_gpio(1),
airspy_gpiodir(1),
airspy_lib_version(1)
AUTHOR¶
This manual page was written by Maitland Bottoms for the Debian project (but may
be used by others).
COPYRIGHT¶
Copyright (c) 2014-2015 A. Maitland Bottoms <bottoms@debian.org>
This program is free software: you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation, either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details.