Scroll to navigation

ZFS(8) System Manager's Manual ZFS(8)

NAME

zfsconfigures ZFS file systems

SYNOPSIS

zfs [-?]

zfs create [-pu] [-o property=value]... filesystem

zfs create [-ps] [-b blocksize] [-o property=value]... -V size volume

zfs destroy [-fnpRrv] filesystem|volume

zfs destroy [-dnpRrv] filesystem|volume@snap[%snap][,snap[%snap]][,...]

zfs destroy filesystem|volume#bookmark

zfs snapshot|snap [-r] [-o property=value]... filesystem@snapname|volume@snapname filesystem@snapname|volume@snapname...

zfs rollback [-rRf] snapshot

zfs clone [-p] [-o property=value]... snapshot filesystem|volume

zfs promote clone-filesystem

zfs rename [-f] filesystem|volume|snapshot filesystem|volume|snapshot

zfs rename [-f] -p filesystem|volume filesystem|volume

zfs rename -r snapshot snapshot

zfs rename -u [-p] filesystem filesystem

zfs list [-r|-d depth] [-Hp] [-o property[,property]...] [-t type[,type]...] [-s property]... [-S property]... filesystem|volume|snapshot

zfs set property=value [property=value]... filesystem|volume|snapshot...

zfs get [-r|-d depth] [-Hp] [-o all | field[,field]...] [-t type[, type]...] [-s source[,source]...] all | property[,property]... filesystem|volume|snapshot...

zfs inherit [-rS] property filesystem|volume|snapshot...

zfs upgrade [-v]

zfs upgrade [-r] [-V version] -a | filesystem

zfs userspace [-Hinp] [-o field[,field]...] [-s field]... [-S field]... [-t type[,type]...] filesystem|snapshot

zfs groupspace [-Hinp] [-o field[,field]...] [-s field]... [-S field]... [-t type[,type]...] filesystem|snapshot

zfs mount

zfs mount [-vO] [-o property[,property]...] -a | filesystem

zfs unmount|umount [-f] -a | filesystem|mountpoint

zfs share -a | filesystem

zfs unshare -a | filesystem|mountpoint

zfs bookmark snapshot bookmark

zfs send [-DnPpRveL] [-i snapshot | -I snapshot] snapshot

zfs send [-eL] [-i snapshot|bookmark] filesystem|volume|snapshot

zfs send [-Penv] -t receive_resume_token

zfs receive|recv [-vnsFu] [-o origin=snapshot] filesystem|volume|snapshot

zfs receive|recv [-vnsFu] [-d | -e] [-o origin=snapshot] filesystem

zfs receive|recv -A filesystem|volume

zfs allow filesystem|volume

zfs allow [-ldug] user|group[,user|group]... perm|@setname[,perm|@setname]... filesystem|volume

zfs allow [-ld] -e|everyone perm|@setname[,perm|@setname]... filesystem|volume

zfs allow -c perm|@setname[,perm|@setname]... filesystem|volume

zfs allow -s @setname perm|@setname[,perm|@setname]... filesystem|volume

zfs unallow [-rldug] user|group[,user|group]... [perm|@setname[,perm|@setname]...] filesystem|volume

zfs unallow [-rld] -e|everyone [perm|@setname[,perm|@setname]...] filesystem|volume

zfs unallow [-r] -c [perm|@setname[,perm|@setname]...] filesystem|volume

zfs unallow [-r] -s @setname [perm|@setname[,perm|@setname]...] filesystem|volume

zfs hold [-r] tag snapshot...

zfs holds [-r] snapshot...

zfs release [-r] tag snapshot...

zfs diff [-FHt] snapshot [snapshot|filesystem]

zfs jail jailid|jailname filesystem

zfs unjail jailid|jailname filesystem

DESCRIPTION

The zfs command configures ZFS datasets within a ZFS storage pool, as described in zpool(8). A dataset is identified by a unique path within the ZFS namespace. For example:

pool/{filesystem,volume,snapshot}

where the maximum length of a dataset name is MAXNAMELEN (256 bytes).

A dataset can be one of the following:

A ZFS dataset of type filesystem can be mounted within the standard system namespace and behaves like other file systems. While ZFS file systems are designed to be POSIX compliant, known issues exist that prevent compliance in some cases. Applications that depend on standards conformance might fail due to nonstandard behavior when checking file system free space.
A logical volume exported as a raw or block device. This type of dataset should only be used under special circumstances. File systems are typically used in most environments.
A read-only version of a file system or volume at a given point in time. It is specified as or .

ZFS File System Hierarchy

A ZFS storage pool is a logical collection of devices that provide space for datasets. A storage pool is also the root of the ZFS file system hierarchy.

The root of the pool can be accessed as a file system, such as mounting and unmounting, taking snapshots, and setting properties. The physical storage characteristics, however, are managed by the zpool(8) command.

See zpool(8) for more information on creating and administering pools.

Snapshots

A snapshot is a read-only copy of a file system or volume. Snapshots can be created extremely quickly, and initially consume no additional space within the pool. As data within the active dataset changes, the snapshot consumes more data than would otherwise be shared with the active dataset.

Snapshots can have arbitrary names. Snapshots of volumes can be cloned or rolled back, but cannot be accessed independently.

File system snapshots can be accessed under the .zfs/snapshot directory in the root of the file system. Snapshots are automatically mounted on demand and may be unmounted at regular intervals. The visibility of the .zfs directory can be controlled by the snapdir property.

Clones

A clone is a writable volume or file system whose initial contents are the same as another dataset. As with snapshots, creating a clone is nearly instantaneous, and initially consumes no additional space.

Clones can only be created from a snapshot. When a snapshot is cloned, it creates an implicit dependency between the parent and child. Even though the clone is created somewhere else in the dataset hierarchy, the original snapshot cannot be destroyed as long as a clone exists. The origin property exposes this dependency, and the destroy command lists any such dependencies, if they exist.

The clone parent-child dependency relationship can be reversed by using the promote subcommand. This causes the "origin" file system to become a clone of the specified file system, which makes it possible to destroy the file system that the clone was created from.

Mount Points

Creating a ZFS file system is a simple operation, so the number of file systems per system is likely to be numerous. To cope with this, ZFS automatically manages mounting and unmounting file systems without the need to edit the /etc/fstab file. All automatically managed file systems are mounted by ZFS at boot time.

By default, file systems are mounted under /path, where path is the name of the file system in the ZFS namespace. Directories are created and destroyed as needed.

A file system can also have a mount point set in the mountpoint property. This directory is created as needed, and ZFS automatically mounts the file system when the "zfs mount -a" command is invoked (without editing /etc/fstab). The mountpoint property can be inherited, so if pool/home has a mount point of /home, then automatically inherits a mount point of /home/user.

A file system mountpoint property of none prevents the file system from being mounted.

If needed, ZFS file systems can also be managed with traditional tools (mount(8), umount(8), fstab(5)). If a file system's mount point is set to legacy, ZFS makes no attempt to manage the file system, and the administrator is responsible for mounting and unmounting the file system.

Jails

A ZFS dataset can be attached to a jail by using the "zfs jail" subcommand. You cannot attach a dataset to one jail and the children of the same dataset to another jails. To allow management of the dataset from within a jail, the jailed property has to be set and the jail needs access to the /dev/zfs device. The quota property cannot be changed from within a jail. See jail(8) for information on how to allow mounting ZFS datasets from within a jail.

A ZFS dataset can be detached from a jail using the "zfs unjail" subcommand.

After a dataset is attached to a jail and the jailed property is set, a jailed file system cannot be mounted outside the jail, since the jail administrator might have set the mount point to an unacceptable value.

Deduplication

Deduplication is the process for removing redundant data at the block-level, reducing the total amount of data stored. If a file system has the dedup property enabled, duplicate data blocks are removed synchronously. The result is that only unique data is stored and common components are shared among files.

Native Properties

Properties are divided into two types, native properties and user-defined (or "user") properties. Native properties either export internal statistics or control ZFS behavior. In addition, native properties are either editable or read-only. User properties have no effect on ZFS behavior, but you can use them to annotate datasets in a way that is meaningful in your environment. For more information about user properties, see the "User Properties" section, below.

Every dataset has a set of properties that export statistics about the dataset as well as control various behaviors. Properties are inherited from the parent unless overridden by the child. Some properties apply only to certain types of datasets (file systems, volumes, or snapshots).

The values of numeric properties can be specified using human-readable suffixes (for example, , , M, , and so forth, up to Z for zettabyte). The following are all valid (and equal) specifications:

1536M, 1.5g, 1.50GB

The values of non-numeric properties are case sensitive and must be lowercase, except for mountpoint, sharenfs, and sharesmb.

The following native properties consist of read-only statistics about the dataset. These properties can be neither set, nor inherited. Native properties apply to all dataset types unless otherwise noted.

The amount of space available to the dataset and all its children, assuming that there is no other activity in the pool. Because space is shared within a pool, availability can be limited by any number of factors, including physical pool size, quotas, reservations, or other datasets within the pool.

This property can also be referred to by its shortened column name, .

For non-snapshots, the compression ratio achieved for the used space of this dataset, expressed as a multiplier. The used property includes descendant datasets, and, for clones, does not include the space shared with the origin snapshot. For snapshots, the compressratio is the same as the refcompressratio property. Compression can be turned on by running: "zfs set compression=on dataset" The default value is off.
The time this dataset was created.
For snapshots, this property is a comma-separated list of filesystems or volumes which are clones of this snapshot. The clones' origin property is this snapshot. If the clones property is not empty, then this snapshot can not be destroyed (even with the -r or -f options).
This property is on if the snapshot has been marked for deferred destroy by using the "zfs destroy -d" command. Otherwise, the property is off.
The total number of filesystems and volumes that exist under this location in the dataset tree. This value is only available when a filesystem_limit has been set somewhere in the tree under which the dataset resides.
The amount of space that is "logically" accessible by this dataset. See the referenced property. The logical space ignores the effect of the compression and copies properties, giving a quantity closer to the amount of data that applications see. However, it does include space consumed by metadata.

This property can also be referred to by its shortened column name, .

The amount of space that is "logically" consumed by this dataset and all its descendents. See the used property. The logical space ignores the effect of the compression and copies properties, giving a quantity closer to the amount of data that applications see.

This property can also be referred to by its shortened column name, .

For file systems, indicates whether the file system is currently mounted. This property can be either yes or no.
For cloned file systems or volumes, the snapshot from which the clone was created. See also the clones property.
For filesystems or volumes which have saved partially-completed state from zfs receive -s, this opaque token can be provided to zfs send -t to resume and complete the zfs receive.
The amount of data that is accessible by this dataset, which may or may not be shared with other datasets in the pool. When a snapshot or clone is created, it initially references the same amount of space as the file system or snapshot it was created from, since its contents are identical.

This property can also be referred to by its shortened column name, .

The compression ratio achieved for the referenced space of this dataset, expressed as a multiplier. See also the compressratio property.
The total number of snapshots that exist under this location in the dataset tree. This value is only available when a snapshot_limit has been set somewhere in the tree under which the dataset resides.
The type of dataset: filesystem, volume, or snapshot.
The amount of space consumed by this dataset and all its descendents. This is the value that is checked against this dataset's quota and reservation. The space used does not include this dataset's reservation, but does take into account the reservations of any descendent datasets. The amount of space that a dataset consumes from its parent, as well as the amount of space that are freed if this dataset is recursively destroyed, is the greater of its space used and its reservation.

When snapshots (see the "Snapshots" section) are created, their space is initially shared between the snapshot and the file system, and possibly with previous snapshots. As the file system changes, space that was previously shared becomes unique to the snapshot, and counted in the snapshot's space used. Additionally, deleting snapshots can increase the amount of space unique to (and used by) other snapshots.

The amount of space used, available, or referenced does not take into account pending changes. Pending changes are generally accounted for within a few seconds. Committing a change to a disk using fsync(2) or does not necessarily guarantee that the space usage information is updated immediately.

The usedby* properties decompose the used properties into the various reasons that space is used. Specifically, used = usedbysnapshots + usedbydataset + usedbychildren + usedbyrefreservation. These properties are only available for datasets created with ZFS pool version 13 pools and higher.
The amount of space consumed by snapshots of this dataset. In particular, it is the amount of space that would be freed if all of this dataset's snapshots were destroyed. Note that this is not simply the sum of the snapshots' used properties because space can be shared by multiple snapshots.
The amount of space used by this dataset itself, which would be freed if the dataset were destroyed (after first removing any refreservation and destroying any necessary snapshots or descendents).
The amount of space used by children of this dataset, which would be freed if all the dataset's children were destroyed.
The amount of space used by a refreservation set on this dataset, which would be freed if the refreservation was removed.
user
The amount of space consumed by the specified user in this dataset. Space is charged to the owner of each file, as displayed by "ls -l". The amount of space charged is displayed by "du" and "ls -s". See the "zfs userspace" subcommand for more information.

Unprivileged users can access only their own space usage. The root user, or a user who has been granted the privilege with "zfs allow", can access everyone's usage.

The userused@... properties are not displayed by "zfs get all". The user's name must be appended after the @ symbol, using one of the following forms:

  • POSIX name (for example, joe)
  • POSIX numeric ID (for example, 1001)
This property is set to the number of user holds on this snapshot. User holds are set by using the "zfs hold" command.
group
The amount of space consumed by the specified group in this dataset. Space is charged to the group of each file, as displayed by ls -l. See the userused@user property for more information.

Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the privilege with "zfs allow", can access all groups' usage.

=blocksize
For volumes, specifies the block size of the volume. The blocksize cannot be changed once the volume has been written, so it should be set at volume creation time. The default blocksize for volumes is 8 Kbytes. Any power of 2 from 512 bytes to 128 Kbytes is valid.

This property can also be referred to by its shortened column name, .

The amount of referenced space written to this dataset since the previous snapshot.
snapshot
The amount of referenced space written to this dataset since the specified snapshot. This is the space that is referenced by this dataset but was not referenced by the specified snapshot.

The snapshot may be specified as a short snapshot name (just the part after the @), in which case it will be interpreted as a snapshot in the same filesystem as this dataset. The snapshot may be a full snapshot name (), which for clones may be a snapshot in the origin's filesystem (or the origin of the origin's filesystem, etc).

The following native properties can be used to change the behavior of a ZFS dataset.

=discard | | | |
Controls how ACL entries are inherited when files and directories are created. A file system with an aclinherit property of discard does not inherit any ACL entries. A file system with an aclinherit property value of noallow only inherits inheritable ACL entries that specify "deny" permissions. The property value restricted (the default) removes the and permissions when the ACL entry is inherited. A file system with an aclinherit property value of passthrough inherits all inheritable ACL entries without any modifications made to the ACL entries when they are inherited. A file system with an aclinherit property value of passthrough-x has the same meaning as passthrough, except that the , , and ACEs inherit the execute permission only if the file creation mode also requests the execute bit.

When the property value is set to passthrough, files are created with a mode determined by the inheritable ACEs. If no inheritable ACEs exist that affect the mode, then the mode is set in accordance to the requested mode from the application.

=discard | | |
Controls how an ACL is modified during chmod(2). A file system with an aclmode property of discard (the default) deletes all ACL entries that do not represent the mode of the file. An aclmode property of groupmask reduces permissions granted in all entries found in the ACL such that they are no greater than the group permissions specified by chmod(2). A file system with an aclmode property of passthrough indicates that no changes are made to the ACL other than creating or updating the necessary ACL entries to represent the new mode of the file or directory. An aclmode property of restricted will cause the chmod(2) operation to return an error when used on any file or directory which has a non-trivial ACL whose entries can not be represented by a mode. chmod(2) is required to change the set user ID, set group ID, or sticky bits on a file or directory, as they do not have equivalent ACL entries. In order to use chmod(2) on a file or directory with a non-trivial ACL when aclmode is set to restricted, you must first remove all ACL entries which do not represent the current mode.
=on |
Controls whether the access time for files is updated when they are read. Turning this property off avoids producing write traffic when reading files and can result in significant performance gains, though it might confuse mailers and other similar utilities. The default value is on.
=on | |
If this property is set to off, the file system cannot be mounted, and is ignored by "zfs mount -a". Setting this property to off is similar to setting the mountpoint property to none, except that the dataset still has a normal mountpoint property, which can be inherited. Setting this property to off allows datasets to be used solely as a mechanism to inherit properties. One example of setting canmount=off is to have two datasets with the same mountpoint, so that the children of both datasets appear in the same directory, but might have different inherited characteristics.

When the noauto value is set, a dataset can only be mounted and unmounted explicitly. The dataset is not mounted automatically when the dataset is created or imported, nor is it mounted by the "zfs mount -a" command or unmounted by the "zfs umount -a" command.

This property is not inherited.

=on | | | | |
Controls the checksum used to verify data integrity. The default value is on, which automatically selects an appropriate algorithm (currently, fletcher4, but this may change in future releases). The value off disables integrity checking on user data. The value noparity not only disables integrity but also disables maintaining parity for user data. This setting is used internally by a dump device residing on a RAID-Z pool and should not be used by any other dataset. Disabling checksums is a recommended practice.
=on | | | | N | |
Controls the compression algorithm used for this dataset. Setting compression to on indicates that the current default compression algorithm should be used. The default balances compression and decompression speed, with compression ratio and is expected to work well on a wide variety of workloads. Unlike all other settings for this property, on does not select a fixed compression type. As new compression algorithms are added to ZFS and enabled on a pool, the default compression algorithm may change. The current default compression algorthm is either lzjb or, if the lz4_compress feature is enabled, lz4. The lzjb compression algorithm is optimized for performance while providing decent data compression. Setting compression to on uses the lzjb compression algorithm. The gzip compression algorithm uses the same compression as the gzip(1) command. You can specify the gzip level by using the value gzip-N where N is an integer from 1 (fastest) to 9 (best compression ratio). Currently, gzip is equivalent to gzip-6 (which is also the default for gzip(1)). The zle compression algorithm compresses runs of zeros.

The lz4 compression algorithm is a high-performance replacement for the lzjb algorithm. It features significantly faster compression and decompression, as well as a moderately higher compression ratio than lzjb, but can only be used on pools with the lz4_compress feature set to . See zpool-features(7) for details on ZFS feature flags and the lz4_compress feature.

This property can also be referred to by its shortened column name compress. Changing this property affects only newly-written data.

=1 | |
Controls the number of copies of data stored for this dataset. These copies are in addition to any redundancy provided by the pool, for example, mirroring or RAID-Z. The copies are stored on different disks, if possible. The space used by multiple copies is charged to the associated file and dataset, changing the used property and counting against quotas and reservations.

Changing this property only affects newly-written data. Therefore, set this property at file system creation time by using the -o copies=N option.

=on | | | [,verify]
Configures deduplication for a dataset. The default value is off. The default deduplication checksum is sha256 (this may change in the future). When dedup is enabled, the checksum defined here overrides the checksum property. Setting the value to verify has the same effect as the setting sha256,verify.

If set to verify, ZFS will do a byte-to-byte comparsion in case of two blocks having the same signature to make sure the block contents are identical.

=on |
The devices property is currently not supported on FreeBSD.
=on |
Controls whether processes can be executed from within this file system. The default value is on.
=label |
The mlslabel property is currently not supported on FreeBSD.
=count |
Limits the number of filesystems and volumes that can exist under this point in the dataset tree. The limit is not enforced if the user is allowed to change the limit. Setting a filesystem_limit on a descendent of a filesystem that already has a filesystem_limit does not override the ancestor's filesystem_limit, but rather imposes an additional limit. This feature must be enabled to be used (see zpool-features(7)).
=path | |
Controls the mount point used for this file system. See the "Mount Points" section for more information on how this property is used.

When the mountpoint property is changed for a file system, the file system and any children that inherit the mount point are unmounted. If the new value is legacy, then they remain unmounted. Otherwise, they are automatically remounted in the new location if the property was previously legacy or none, or if they were mounted before the property was changed. In addition, any shared file systems are unshared and shared in the new location.

=on |
The nbmand property is currently not supported on FreeBSD.
=all | |
Controls what is cached in the primary cache (ARC). If this property is set to all, then both user data and metadata is cached. If this property is set to none, then neither user data nor metadata is cached. If this property is set to metadata, then only metadata is cached. The default value is all.
=size |
Limits the amount of space a dataset and its descendents can consume. This property enforces a hard limit on the amount of space used. This includes all space consumed by descendents, including file systems and snapshots. Setting a quota on a descendent of a dataset that already has a quota does not override the ancestor's quota, but rather imposes an additional limit.

Quotas cannot be set on volumes, as the volsize property acts as an implicit quota.

=count |
Limits the number of snapshots that can be created on a dataset and its descendents. Setting a snapshot_limit on a descendent of a dataset that already has a snapshot_limit does not override the ancestor's snapshot_limit, but rather imposes an additional limit. The limit is not enforced if the user is allowed to change the limit. For example, this means that recursive snapshots taken from the global zone are counted against each delegated dataset within a jail. This feature must be enabled to be used (see zpool-features(7)).
user=size |
Limits the amount of space consumed by the specified user. Similar to the refquota property, the userquota space calculation does not include space that is used by descendent datasets, such as snapshots and clones. User space consumption is identified by the user property.

Enforcement of user quotas may be delayed by several seconds. This delay means that a user might exceed their quota before the system notices that they are over quota and begins to refuse additional writes with the error message. See the userspace subcommand for more information.

Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the userquota privilege with "zfs allow", can get and set everyone's quota.

This property is not available on volumes, on file systems before version 4, or on pools before version 15. The userquota@... properties are not displayed by "zfs get all". The user's name must be appended after the @ symbol, using one of the following forms:

  • POSIX name (for example, joe)
  • POSIX numeric ID (for example, 1001)
group=size |
Limits the amount of space consumed by the specified group. Group space consumption is identified by the userquota@user property.

Unprivileged users can access only their own groups' space usage. The root user, or a user who has been granted the privilege with "zfs allow", can get and set all groups' quotas.

=on |
Controls whether this dataset can be modified. The default value is off.
=size
Specifies a suggested block size for files in the file system. This property is designed solely for use with database workloads that access files in fixed-size records. ZFS automatically tunes block sizes according to internal algorithms optimized for typical access patterns.

For databases that create very large files but access them in small random chunks, these algorithms may be suboptimal. Specifying a recordsize greater than or equal to the record size of the database can result in significant performance gains. Use of this property for general purpose file systems is strongly discouraged, and may adversely affect performance.

The size specified must be a power of two greater than or equal to 512 and less than or equal to 128 Kbytes. If the large_blocks feature is enabled on the pool, the size may be up to 1 Mbyte. See zpool-features(7) for details on ZFS feature flags.

Changing the file system's recordsize affects only files created afterward; existing files are unaffected.

This property can also be referred to by its shortened column name, .

=all |
Controls what types of metadata are stored redundantly. ZFS stores an extra copy of metadata, so that if a single block is corrupted, the amount of user data lost is limited. This extra copy is in addition to any redundancy provided at the pool level (e.g. by mirroring or RAID-Z), and is in addition to an extra copy specified by the copies property (up to a total of 3 copies). For example if the pool is mirrored, copies=2, and redundant_metadata=most, then ZFS stores 6 copies of most metadata, and 4 copies of data and some metadata.

When set to all, ZFS stores an extra copy of all metadata. If a single on-disk block is corrupt, at worst a single block of user data (which is recordsize bytes long can be lost.)

When set to most, ZFS stores an extra copy of most types of metadata. This can improve performance of random writes, because less metadata must be written. In practice, at worst about 100 blocks (of recordsize bytes each) of user data can be lost if a single on-disk block is corrupt. The exact behavior of which metadata blocks are stored redundantly may change in future releases.

The default value is all.

=size |
Limits the amount of space a dataset can consume. This property enforces a hard limit on the amount of space used. This hard limit does not include space used by descendents, including file systems and snapshots.
=size |
The minimum amount of space guaranteed to a dataset, not including its descendents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space specified by refreservation. The refreservation reservation is accounted for in the parent datasets' space used, and counts against the parent datasets' quotas and reservations.

If refreservation is set, a snapshot is only allowed if there is enough free pool space outside of this reservation to accommodate the current number of "referenced" bytes in the dataset.

This property can also be referred to by its shortened column name, .

=size |
The minimum amount of space guaranteed to a dataset and its descendents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space specified by its reservation. Reservations are accounted for in the parent datasets' space used, and count against the parent datasets' quotas and reservations.

This property can also be referred to by its shortened column name, .

=all | |
Controls what is cached in the secondary cache (L2ARC). If this property is set to all, then both user data and metadata is cached. If this property is set to none, then neither user data nor metadata is cached. If this property is set to metadata, then only metadata is cached. The default value is all.
=on |
Controls whether the set-UID bit is respected for the file system. The default value is on.
=on | | opts
The sharesmb property currently has no effect on FreeBSD.
=on | | opts
Controls whether the file system is shared via NFS, and what options are used. A file system with a sharenfs property of off is managed the traditional way via exports(5). Otherwise, the file system is automatically shared and unshared with the "zfs share" and "zfs unshare" commands. If the property is set to on no NFS export options are used. Otherwise, NFS export options are equivalent to the contents of this property. The export options may be comma-separated. See exports(5) for a list of valid options.

When the sharenfs property is changed for a dataset, the mountd(8) daemon is reloaded.

=latency |
Provide a hint to ZFS about handling of synchronous requests in this dataset. If logbias is set to latency (the default), ZFS will use pool log devices (if configured) to handle the requests at low latency. If logbias is set to throughput, ZFS will not use configured pool log devices. ZFS will instead optimize synchronous operations for global pool throughput and efficient use of resources.
=hidden |
Controls whether the .zfs directory is hidden or visible in the root of the file system as discussed in the "Snapshots" section. The default value is hidden.
=standard | |
Controls the behavior of synchronous requests (e.g. fsync(2), O_DSYNC). This property accepts the following values:
This is the POSIX specified behavior of ensuring all synchronous requests are written to stable storage and all devices are flushed to ensure data is not cached by device controllers (this is the default).
All file system transactions are written and flushed before their system calls return. This has a large performance penalty.
Disables synchronous requests. File system transactions are only committed to stable storage periodically. This option will give the highest performance. However, it is very dangerous as ZFS would be ignoring the synchronous transaction demands of applications such as databases or NFS. Administrators should only use this option when the risks are understood.
=size
For volumes, specifies the logical size of the volume. By default, creating a volume establishes a reservation of equal size. For storage pools with a version number of 9 or higher, a refreservation is set instead. Any changes to volsize are reflected in an equivalent change to the reservation (or refreservation). The volsize can only be set to a multiple of volblocksize, and cannot be zero.

The reservation is kept equal to the volume's logical size to prevent unexpected behavior for consumers. Without the reservation, the volume could run out of space, resulting in undefined behavior or data corruption, depending on how the volume is used. These effects can also occur when the volume size is changed while it is in use (particularly when shrinking the size). Extreme care should be used when adjusting the volume size.

Though not recommended, a "sparse volume" (also known as "thin provisioning") can be created by specifying the -s option to the "zfs create -V" command, or by changing the reservation after the volume has been created. A "sparse volume" is a volume where the reservation is less then the volume size. Consequently, writes to a sparse volume can fail with when the pool is low on space. For a sparse volume, changes to volsize are not reflected in the reservation.

=default | | |
This property specifies how volumes should be exposed to the OS. Setting it to geom exposes volumes as geom(4) providers, providing maximal functionality. Setting it to dev exposes volumes only as cdev device in devfs. Such volumes can be accessed only as raw disk device files, i.e. they can not be partitioned, mounted, participate in RAIDs, etc, but they are faster, and in some use scenarios with untrusted consumer, such as NAS or VM storage, can be more safe. Volumes with property set to none are not exposed outside ZFS, but can be snapshoted, cloned, replicated, etc, that can be suitable for backup purposes. Value means that volumes exposition is controlled by system-wide sysctl/tunable vfs.zfs.vol.mode, where geom, dev and none are encoded as 1, 2 and 3 respectively. The default values is geom. This property can be changed any time, but so far it is processed only during volume creation and pool import.
=off |
The vscan property is currently not supported on FreeBSD.
=off |
The xattr property is currently not supported on FreeBSD.
=off |
Controls whether the dataset is managed from a jail. See the "Jails" section for more information. The default value is off.

The following three properties cannot be changed after the file system is created, and therefore, should be set when the file system is created. If the properties are not set with the "zfs create" or zpool create commands, these properties are inherited from the parent dataset. If the parent dataset lacks these properties due to having been created prior to these features being supported, the new file system will have the default values for these properties.

=sensitive | |
Indicates whether the file name matching algorithm used by the file system should be case-sensitive, case-insensitive, or allow a combination of both styles of matching. The default value for the casesensitivity property is sensitive. Traditionally, UNIX and POSIX file systems have case-sensitive file names.

The mixed value for the casesensitivity property indicates that the file system can support requests for both case-sensitive and case-insensitive matching behavior.

=none | | | |
Indicates whether the file system should perform a normalization of file names whenever two file names are compared, and which normalization algorithm should be used. File names are always stored unmodified, names are normalized as part of any comparison process. If this property is set to a legal value other than none, and the utf8only property was left unspecified, the utf8only property is automatically set to on. The default value of the normalization property is none. This property cannot be changed after the file system is created.
=on |
Indicates whether the file system should reject file names that include characters that are not present in the character code set. If this property is explicitly set to off, the normalization property must either not be explicitly set or be set to none. The default value for the utf8only property is off. This property cannot be changed after the file system is created.

The casesensitivity, normalization, and utf8only properties are also new permissions that can be assigned to non-privileged users by using the ZFS delegated administration feature.

Temporary Mount Point Properties

When a file system is mounted, either through mount(8) for legacy mounts or the "zfs mount" command for normal file systems, its mount options are set according to its properties. The correlation between properties and mount options is as follows:

PROPERTY MOUNT OPTION
atime atime/noatime
exec exec/noexec
readonly ro/rw
setuid suid/nosuid

In addition, these options can be set on a per-mount basis using the -o option, without affecting the property that is stored on disk. The values specified on the command line override the values stored in the dataset. These properties are reported as "temporary" by the "zfs get" command. If the properties are changed while the dataset is mounted, the new setting overrides any temporary settings.

User Properties

In addition to the standard native properties, ZFS supports arbitrary user properties. User properties have no effect on ZFS behavior, but applications or administrators can use them to annotate datasets (file systems, volumes, and snapshots).

User property names must contain a colon (:) character to distinguish them from native properties. They may contain lowercase letters, numbers, and the following punctuation characters: colon (:), dash (-), period () and underscore (). The expected convention is that the property name is divided into two portions such as :, but this namespace is not enforced by ZFS. User property names can be at most 256 characters, and cannot begin with a dash (-).

When making programmatic use of user properties, it is strongly suggested to use a reversed DNS domain name for the module component of property names to reduce the chance that two independently-developed packages use the same property name for different purposes. Property names beginning with are reserved for use by Sun Microsystems.

The values of user properties are arbitrary strings, are always inherited, and are never validated. All of the commands that operate on properties ("zfs list", "zfs get", "zfs set" and so forth) can be used to manipulate both native properties and user properties. Use the "zfs inherit" command to clear a user property. If the property is not defined in any parent dataset, it is removed entirely. Property values are limited to 1024 characters.

SUBCOMMANDS

All subcommands that modify state are logged persistently to the pool in their original form.

zfs [-?]

Displays a help message.

zfs create [-pu] [-o property=value]... filesystem

Creates a new ZFS file system. The file system is automatically mounted according to the mountpoint property inherited from the parent.

Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. Any property specified on the command line using the -o option is ignored. If the target filesystem already exists, the operation completes successfully.
Newly created file system is not mounted.
property=value
Sets the specified property as if the command "zfs set property=value" was invoked at the same time the dataset was created. Any editable ZFS property can also be set at creation time. Multiple -o options can be specified. An error results if the same property is specified in multiple -o options.
zfs create [-ps] [-b blocksize] [-o property=value]... -V size volume

Creates a volume of the given size. The volume is exported as a block device in /dev/zvol/path, where path is the name of the volume in the ZFS namespace. The size represents the logical size as exported by the device. By default, a reservation of equal size is created.

size is automatically rounded up to the nearest 128 Kbytes to ensure that the volume has an integral number of blocks regardless of blocksize.

Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. Any property specified on the command line using the -o option is ignored. If the target filesystem already exists, the operation completes successfully.
Creates a sparse volume with no reservation. See volsize in the "Native Properties" section for more information about sparse volumes.
blocksize
Equivalent to -o volblocksize=blocksize. If this option is specified in conjunction with -o volblocksize, the resulting behavior is undefined.
property=value
Sets the specified property as if the "zfs set property=value" command was invoked at the same time the dataset was created. Any editable ZFS property can also be set at creation time. Multiple -o options can be specified. An error results if the same property is specified in multiple -o options.
zfs destroy [-fnpRrv] filesystem|volume

Destroys the given dataset. By default, the command unshares any file systems that are currently shared, unmounts any file systems that are currently mounted, and refuses to destroy a dataset that has active dependents (children or clones).

Recursively destroy all children.
Recursively destroy all dependents, including cloned file systems outside the target hierarchy.
Force an unmount of any file systems using the "zfs unmount -f" command. This option has no effect on non-file systems or unmounted file systems.
Do a dry-run ("No-op") deletion. No data will be deleted. This is useful in conjunction with the -v or -p flags to determine what data would be deleted.
Print machine-parsable verbose information about the deleted data.
Print verbose information about the deleted data.

Extreme care should be taken when applying either the -r or the -R options, as they can destroy large portions of a pool and cause unexpected behavior for mounted file systems in use.

zfs destroy [-dnpRrv] snapshot[%snapname][,...]

The given snapshots are destroyed immediately if and only if the "zfs destroy" command without the -d option would have destroyed it. Such immediate destruction would occur, for example, if the snapshot had no clones and the user-initiated reference count were zero.

If a snapshot does not qualify for immediate destruction, it is marked for deferred deletion. In this state, it exists as a usable, visible snapshot until both of the preconditions listed above are met, at which point it is destroyed.

An inclusive range of snapshots may be specified by separating the first and last snapshots with a percent sign (). The first and/or last snapshots may be left blank, in which case the filesystem's oldest or newest snapshot will be implied.

Multiple snapshots (or ranges of snapshots) of the same filesystem or volume may be specified in a comma-separated list of snapshots. Only the snapshot's short name (the part after the @) should be specified when using a range or comma-separated list to identify multiple snapshots.

Destroy (or mark for deferred deletion) all snapshots with this name in descendent file systems.
Recursively destroy all clones of these snapshots, including the clones, snapshots, and children. If this flag is specified, the -d flag will have no effect.
Do a dry-run ("No-op") deletion. No data will be deleted. This is useful in conjunction with the -v or -p flags to determine what data would be deleted.
Print machine-parsable verbose information about the deleted data.
Print verbose information about the deleted data.
Defer snapshot deletion.

Extreme care should be taken when applying either the -r or the -R options, as they can destroy large portions of a pool and cause unexpected behavior for mounted file systems in use.

zfs destroy filesystem|volume#bookmark

The given bookmark is destroyed.

zfs snapshot|snap [-r] [-o property=value]... filesystem@snapname|volume@snapname filesystem@snapname|volume@snapname...

Creates snapshots with the given names. All previous modifications by successful system calls to the file system are part of the snapshots. Snapshots are taken atomically, so that all snapshots correspond to the same moment in time. See the "Snapshots" section for details.

Recursively create snapshots of all descendent datasets
property=value
Sets the specified property; see "zfs create" for details.
zfs rollback [-rRf] snapshot

Roll back the given dataset to a previous snapshot. When a dataset is rolled back, all data that has changed since the snapshot is discarded, and the dataset reverts to the state at the time of the snapshot. By default, the command refuses to roll back to a snapshot other than the most recent one. In order to do so, all intermediate snapshots and bookmarks must be destroyed by specifying the -r option.

The -rR options do not recursively destroy the child snapshots of a recursive snapshot. Only direct snapshots of the specified filesystem are destroyed by either of these options. To completely roll back a recursive snapshot, you must rollback the individual child snapshots.

Destroy any snapshots and bookmarks more recent than the one specified.
Destroy any more recent snapshots and bookmarks, as well as any clones of those snapshots.
Used with the -R option to force an unmount of any clone file systems that are to be destroyed.
zfs clone [-p] [-o property=value]... snapshot filesystem|volume

Creates a clone of the given snapshot. See the "Clones" section for details. The target dataset can be located anywhere in the ZFS hierarchy, and is created as the same type as the original.

Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. If the target filesystem or volume already exists, the operation completes successfully.
property=value
Sets the specified property; see "zfs create" for details.
zfs promote clone-filesystem

Promotes a clone file system to no longer be dependent on its "origin" snapshot. This makes it possible to destroy the file system that the clone was created from. The clone parent-child dependency relationship is reversed, so that the origin file system becomes a clone of the specified file system.

The snapshot that was cloned, and any snapshots previous to this snapshot, are now owned by the promoted clone. The space they use moves from the origin file system to the promoted clone, so enough space must be available to accommodate these snapshots. No new space is consumed by this operation, but the space accounting is adjusted. The promoted clone must not have any conflicting snapshot names of its own. The rename subcommand can be used to rename any conflicting snapshots.

zfs rename [-f] filesystem|volume|snapshot filesystem|volume|snapshot
 
zfs rename [-f] -p filesystem|volume filesystem|volume
 
zfs rename -u [-p] filesystem filesystem

Renames the given dataset. The new target can be located anywhere in the ZFS hierarchy, with the exception of snapshots. Snapshots can only be renamed within the parent file system or volume. When renaming a snapshot, the parent file system of the snapshot does not need to be specified as part of the second argument. Renamed file systems can inherit new mount points, in which case they are unmounted and remounted at the new mount point.

Creates all the nonexistent parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent.
Do not remount file systems during rename. If a file system's mountpoint property is set to legacy or none, file system is not unmounted even if this option is not given.
Force unmount any filesystems that need to be unmounted in the process. This flag has no effect if used together with the -u flag.
zfs rename -r snapshot snapshot

Recursively rename the snapshots of all descendent datasets. Snapshots are the only dataset that can be renamed recursively.

zfs list [-r|-d depth] [-Hp] [-o property[,property]...] [-t type[,type]...] [-s property]... [-S property]... filesystem|volume|snapshot...

Lists the property information for the given datasets in tabular form. If specified, you can list property information by the absolute pathname or the relative pathname. By default, all file systems and volumes are displayed. Snapshots are displayed if the listsnaps property is on (the default is off). The following fields are displayed, , used, available, referenced, mountpoint.

Recursively display any children of the dataset on the command line.
depth
Recursively display any children of the dataset, limiting the recursion to depth. A depth of 1 will display only the dataset and its direct children.
Used for scripting mode. Do not print headers and separate fields by a single tab instead of arbitrary white space.
Display numbers in parsable (exact) values.
property[,property]...
A comma-separated list of properties to display. The property must be:
type[,type]...
A comma-separated list of types to display, where type is one of filesystem, snapshot, , volume, bookmark, or all. For example, specifying -t snapshot displays only snapshots.
property
A property for sorting the output by column in ascending order based on the value of the property. The property must be one of the properties described in the "Properties" section, or the special value name to sort by the dataset name. Multiple properties can be specified at one time using multiple -s property options. Multiple -s options are evaluated from left to right in decreasing order of importance.

The following is a list of sorting criteria:

  • Numeric types sort in numeric order.
  • String types sort in alphabetical order.
  • Types inappropriate for a row sort that row to the literal bottom, regardless of the specified ordering.
  • If no sorting options are specified the existing behavior of "zfs list" is preserved.
property
Same as the -s option, but sorts by property in descending order.
zfs set property=value [property=value]... filesystem|volume|snapshot

Sets the property or list of properties to the given value(s) for each dataset. Only some properties can be edited. See the "Properties" section for more information on what properties can be set and acceptable values. Numeric values can be specified as exact values, or in a human-readable form with a suffix of , , M, , , P, , Z (for bytes, kilobytes, megabytes, gigabytes, terabytes, petabytes, exabytes, or zettabytes, respectively). User properties can be set on snapshots. For more information, see the "User Properties" section.

zfs get [-r|-d depth] [-Hp] [-o all | field[,field]...] [-t type[,type]...] [-s source[,source]...] all | property[,property]... filesystem|volume|snapshot...

Displays properties for the given datasets. If no datasets are specified, then the command displays properties for all datasets on the system. For each property, the following columns are displayed:

name
Dataset name
property
Property name
value
Property value
source
Property source. Can either be local, default, temporary, inherited, received, or none (-).

All columns except the column are displayed by default. The columns to display can be specified by using the -o option. This command takes a comma-separated list of properties as described in the "Native Properties" and "User Properties" sections.

The special value all can be used to display all properties that apply to the given dataset's type (filesystem, volume, snapshot, or bookmark).

Recursively display properties for any children.
depth
Recursively display any children of the dataset, limiting the recursion to depth. A depth of 1 will display only the dataset and its direct children.
Display output in a form more easily parsed by scripts. Any headers are omitted, and fields are explicitly separated by a single tab instead of an arbitrary amount of space.
Display numbers in parsable (exact) values.
all | field[,field]...
A comma-separated list of columns to display. Supported values are . Default values are . The keyword all specifies all columns.
type[,type]...
A comma-separated list of types to display, where type is one of filesystem, snapshot, volume, or all. For example, specifying -t snapshot displays only snapshots.
source[,source]...
A comma-separated list of sources to display. Those properties coming from a source other than those in this list are ignored. Each source must be one of the following: . The default value is all sources.
zfs inherit [-rS] property filesystem|volume|snapshot...

Clears the specified property, causing it to be inherited from an ancestor, restored to default if no ancestor has the property set, or with the -S option reverted to the received value if one exists. See the "Properties" section for a listing of default values, and details on which properties can be inherited.

Recursively inherit the given property for all children.
Revert the property to the received value if one exists; otherwise operate as if the -S option was not specified.
zfs upgrade [-v]

Displays a list of file systems that are not the most recent version.

Displays ZFS filesystem versions supported by the current software. The current ZFS filesystem version and all previous supported versions are displayed, along with an explanation of the features provided with each version.
zfs upgrade [-r] [-V version] -a | filesystem

Upgrades file systems to a new on-disk version. Once this is done, the file systems will no longer be accessible on systems running older versions of the software. "zfs send" streams generated from new snapshots of these file systems cannot be accessed on systems running older versions of the software.

In general, the file system version is independent of the pool version. See zpool(8) for information on the zpool upgrade command.

In some cases, the file system version and the pool version are interrelated and the pool version must be upgraded before the file system version can be upgraded.

Upgrade the specified file system and all descendent file systems.
version
Upgrade to the specified version. If the -V flag is not specified, this command upgrades to the most recent version. This option can only be used to increase the version number, and only up to the most recent version supported by this software.
Upgrade all file systems on all imported pools.
filesystem
Upgrade the specified file system.
zfs userspace [-Hinp] [-o field[,field]...] [-s field]... [-S field]... [-t type[,type]...] filesystem|snapshot

Displays space consumed by, and quotas on, each user in the specified filesystem or snapshot. This corresponds to the userused@user and userquota@user properties.

Print numeric ID instead of user/group name.
Do not print headers, use tab-delimited output.
Use exact (parsable) numeric output.
field[,field]...
Display only the specified fields from the following set: . The default is to display all fields.
field
Sort output by this field. The -s and -S flags may be specified multiple times to sort first by one field, then by another. The default is -s type -s name.
field
Sort by this field in reverse order. See -s.
type[,type]...
Print only the specified types from the following set: .

The default is -t posixuser,smbuser.

The default can be changed to include group types.

Translate SID to POSIX ID. This flag currently has no effect on FreeBSD.
zfs groupspace [-Hinp] [-o field[,field]...] [-s field]... [-S field]... [-t type[,type]...] filesystem|snapshot

Displays space consumed by, and quotas on, each group in the specified filesystem or snapshot. This subcommand is identical to "zfs userspace", except that the default types to display are -t .

zfs mount

Displays all ZFS file systems currently mounted.

 
zfs mount [-vO] [-o property[,property]...] -a | filesystem

Mounts ZFS file systems.

Report mount progress.
Perform an overlay mount. Overlay mounts are not supported on FreeBSD.
property[,property]...
An optional, comma-separated list of mount options to use temporarily for the duration of the mount. See the "Temporary Mount Point Properties" section for details.
Mount all available ZFS file systems. This command may be executed on FreeBSD system startup by /etc/rc.d/zfs. For more information, see variable zfs_enable in rc.conf(5).
filesystem
Mount the specified filesystem.
zfs unmount|umount [-f] -a | filesystem|mountpoint

Unmounts currently mounted ZFS file systems.

Forcefully unmount the file system, even if it is currently in use.
Unmount all available ZFS file systems.
filesystem | mountpoint
Unmount the specified filesystem. The command can also be given a path to a ZFS file system mount point on the system.
zfs share -a | filesystem

Shares ZFS file systems that have the sharenfs property set.

Share all ZFS file systems that have the sharenfs property set. This command may be executed on FreeBSD system startup by /etc/rc.d/zfs. For more information, see variable zfs_enable in rc.conf(5).
filesystem
Share the specified filesystem according to the sharenfs property. File systems are shared when the sharenfs property is set.
zfs unshare -a | filesystem|mountpoint

Unshares ZFS file systems that have the sharenfs property set.

Unshares ZFS file systems that have the sharenfs property set. This command may be executed on FreeBSD system shutdown by /etc/rc.d/zfs. For more information, see variable zfs_enable in rc.conf(5).
filesystem | mountpoint
Unshare the specified filesystem. The command can also be given a path to a ZFS file system shared on the system.
zfs bookmark snapshot bookmark

Creates a bookmark of the given snapshot. Bookmarks mark the point in time when the snapshot was created, and can be used as the incremental source for a "zfs send" command.

This feature must be enabled to be used. See zpool-features(7) for details on ZFS feature flags and the bookmark feature.

zfs send [-DnPpRveL] [-i snapshot | -I snapshot] snapshot

Creates a stream representation of the last snapshot argument (not part of -i or -I) which is written to standard output. The output can be redirected to a file or to a different system (for example, using ssh(1)). By default, a full stream is generated.

snapshot
Generate an incremental stream from the first snapshot (the incremental source) to the second snapshot (the incremental target). The incremental source can be specified as the last component of the snapshot name (the @ character and following) and it is assumed to be from the same file system as the incremental target.

If the destination is a clone, the source may be the origin snapshot, which must be fully specified (for example, pool/fs@origin, not just @origin).

snapshot
Generate a stream package that sends all intermediary snapshots from the first snapshot to the second snapshot. For example, -I @a fs@d is similar to -i @a fs@b; -i @b fs@c; -i @c fs@d. The incremental source may be specified as with the -i option.
Generate a replication stream package, which will replicate the specified filesystem, and all descendent file systems, up to the named snapshot. When received, all properties, snapshots, descendent file systems, and clones are preserved.

If the -i or -I flags are used in conjunction with the -R flag, an incremental replication stream is generated. The current values of properties, and current snapshot and file system names are set when the stream is received. If the -F flag is specified when this stream is received, snapshots and file systems that do not exist on the sending side are destroyed.

Generate a deduplicated stream. Blocks which would have been sent multiple times in the send stream will only be sent once. The receiving system must also support this feature to receive a deduplicated stream. This flag can be used regardless of the dataset's dedup property, but performance will be much better if the filesystem uses a dedup-capable checksum (eg. sha256).
Generate a stream which may contain blocks larger than 128KB. This flag has no effect if the large_blocks pool feature is disabled, or if the recordsize property of this filesystem has never been set above 128KB. The receiving system must have the large_blocks pool feature enabled as well. See zpool-features(7) for details on ZFS feature flags and the large_blocks feature.
Generate a more compact stream by using WRITE_EMBEDDED records for blocks which are stored more compactly on disk by the embedded_data pool feature. This flag has no effect if the embedded_data feature is disabled. The receiving system must have the embedded_data feature enabled. If the lz4_compress feature is active on the sending system, then the receiving system must have that feature enabled as well. See zpool-features(7) for details on ZFS feature flags and the embedded_data feature.
Include the dataset's properties in the stream. This flag is implicit when -R is specified. The receiving system must also support this feature.
Do a dry-run ("No-op") send. Do not generate any actual send data. This is useful in conjunction with the -v or -P flags to determine what data will be sent. In this case, the verbose output will be written to standard output (contrast with a non-dry-run, where the stream is written to standard output and the verbose output goes to standard error).
Print machine-parsable verbose information about the stream package generated.
Print verbose information about the stream package generated. This information includes a per-second report of how much data has been sent.

The format of the stream is committed. You will be able to receive your streams on future versions of ZFS.

zfs send [-eL] [-i snapshot|bookmark] filesystem|volume|snapshot

Generate a send stream, which may be of a filesystem, and may be incremental from a bookmark. If the destination is a filesystem or volume, the pool must be read-only, or the filesystem must not be mounted. When the stream generated from a filesystem or volume is received, the default snapshot name will be (--head--).

snapshot|bookmark
Generate an incremental send stream. The incremental source must be an earlier snapshot in the destination's history. It will commonly be an earlier snapshot in the destination's filesystem, in which case it can be specified as the last component of the name (the or @ character and following).

If the incremental target is a clone, the incremental source can be the origin snapshot, or an earlier snapshot in the origin's filesystem, or the origin's origin, etc.

Generate a stream which may contain blocks larger than 128KB. This flag has no effect if the large_blocks pool feature is disabled, or if the recordsize property of this filesystem has never been set above 128KB. The receiving system must have the large_blocks pool feature enabled as well. See zpool-features(7) for details on ZFS feature flags and the large_blocks feature.
Generate a more compact stream by using WRITE_EMBEDDED records for blocks which are stored more compactly on disk by the embedded_data pool feature. This flag has no effect if the embedded_data feature is disabled. The receiving system must have the embedded_data feature enabled. If the lz4_compress feature is active on the sending system, then the receiving system must have that feature enabled as well. See zpool-features(7) for details on ZFS feature flags and the embedded_data feature.
zfs send [-Penv] -t receive_resume_token
Creates a send stream which resumes an interrupted receive. The receive_resume_token is the value of this property on the filesystem or volume that was being received into. See the documentation for zfs receive -s for more details.
zfs receive|recv [-vnsFu] [-o origin=snapshot] filesystem|volume|snapshot
 
zfs receive|recv [-vnsFu] [-d | -e] [-o origin=snapshot] filesystem

Creates a snapshot whose contents are as specified in the stream provided on standard input. If a full stream is received, then a new file system is created as well. Streams are created using the "zfs send" subcommand, which by default creates a full stream. "zfs recv" can be used as an alias for "zfs receive".

If an incremental stream is received, then the destination file system must already exist, and its most recent snapshot must match the incremental stream's source. For zvols, the destination device link is destroyed and recreated, which means the zvol cannot be accessed during the operation.

When a snapshot replication package stream that is generated by using the "zfs send -R" command is received, any snapshots that do not exist on the sending location are destroyed by using the "zfs destroy -d" command.

The name of the snapshot (and file system, if a full stream is received) that this subcommand creates depends on the argument type and the -d or -e option.

If the argument is a snapshot name, the specified snapshot is created. If the argument is a file system or volume name, a snapshot with the same name as the sent snapshot is created within the specified filesystem or volume. If the -d or -e option is specified, the snapshot name is determined by appending the sent snapshot's name to the specified filesystem. If the -d option is specified, all but the pool name of the sent snapshot path is appended (for example, appended from sent snapshot a/b/c@1), and if the -e option is specified, only the tail of the sent snapshot path is appended (for example, appended from sent snapshot a/b/c@1). In the case of -d, any file systems needed to replicate the path of the sent snapshot are created within the specified file system.

Use the full sent snapshot path without the first element (without pool name) to determine the name of the new snapshot as described in the paragraph above.
Use only the last element of the sent snapshot path to determine the name of the new snapshot as described in the paragraph above.
File system that is associated with the received stream is not mounted.
Print verbose information about the stream and the time required to perform the receive operation.
Do not actually receive the stream. This can be useful in conjunction with the -v option to verify the name the receive operation would use.
origin=snapshot
Forces the stream to be received as a clone of the given snapshot. This is only valid if the stream is an incremental stream whose source is the same as the provided origin.
Force a rollback of the file system to the most recent snapshot before performing the receive operation. If receiving an incremental replication stream (for example, one generated by "zfs send -R {-i | -I}"), destroy snapshots and file systems that do not exist on the sending side.
If the receive is interrupted, save the partially received state, rather than deleting it. Interruption may be due to premature termination of the stream (e.g. due to network failure or failure of the remote system if the stream is being read over a network connection), a checksum error in the stream, termination of the zfs receive process, or unclean shutdown of the system.

The receive can be resumed with a stream generated by zfs send -t token, where the token is the value of the receive_resume_token property of the filesystem or volume which is received into.

To use this flag, the storage pool must have the feature enabled. See zpool-features(5) for details on ZFS feature flags.

zfs receive|recv -A filesystem|volume
Abort an interrupted zfs receive -s, deleting its saved partially received state.
zfs allow filesystem|volume

Displays permissions that have been delegated on the specified filesystem or volume. See the other forms of "zfs allow" for more information.

zfs allow [-ldug] user|group[,user|group]... perm|@setname[,perm|@setname]... filesystem|volume
 
zfs allow [-ld] -e|everyone perm|@setname[,perm|@setname]... filesystem|volume

Delegates ZFS administration permission for the file systems to non-privileged users.

[-ug] user|group[, user|group]...
Specifies to whom the permissions are delegated. Multiple entities can be specified as a comma-separated list. If neither of the -ug options are specified, then the argument is interpreted preferentially as the keyword everyone, then as a user name, and lastly as a group name. To specify a user or group named "everyone", use the -u or -g options. To specify a group with the same name as a user, use the -g option.
[-e|everyone]
Specifies that the permissions be delegated to "everyone".
perm|@setname[,perm|@setname]...
The permissions to delegate. Multiple permissions may be specified as a comma-separated list. Permission names are the same as ZFS subcommand and property names. See the property list below. Property set names, which begin with an at sign (@), may be specified. See the -s form below for details.
[-ld] filesystem|volume
Specifies where the permissions are delegated. If neither of the -ld options are specified, or both are, then the permissions are allowed for the file system or volume, and all of its descendents. If only the -l option is used, then is allowed "locally" only for the specified file system. If only the -d option is used, then is allowed only for the descendent file systems.

Permissions are generally the ability to use a ZFS subcommand or change a ZFS property. The following permissions are available:

NAME TYPE NOTES
allow subcommand Must also have the permission that is being allowed
clone subcommand Must also have the 'create' ability and 'mount' ability in the origin file system
create subcommand Must also have the 'mount' ability
destroy subcommand Must also have the 'mount' ability
diff subcommand Allows lookup of paths within a dataset given an object number, and the ability to create snapshots necessary to 'zfs diff'
hold subcommand Allows adding a user hold to a snapshot
mount subcommand Allows mount/umount of ZFS datasets
promote subcommand Must also have the 'mount' and 'promote' ability in the origin file system
receive subcommand Must also have the 'mount' and 'create' ability
release subcommand Allows releasing a user hold which might destroy the snapshot
rename subcommand Must also have the 'mount' and 'create' ability in the new parent
rollback subcommand Must also have the 'mount' ability
send subcommand
share subcommand Allows sharing file systems over the NFS protocol
snapshot subcommand Must also have the 'mount' ability
groupquota other Allows accessing any groupquota@... property
groupused other Allows reading any groupused@... property
userprop other Allows changing any user property
userquota other Allows accessing any userquota@... property
userused other Allows reading any userused@... property
aclinherit property
aclmode property
atime property
canmount property
casesensitivity property
checksum property
compression property
copies property
dedup property
devices property
exec property
filesystem_limit property
logbias property
jailed property
mlslabel property
mountpoint property
nbmand property
normalization property
primarycache property
quota property
readonly property
recordsize property
refquota property
refreservation property
reservation property
secondarycache property
setuid property
sharenfs property
sharesmb property
snapdir property
snapshot_limit property
sync property
utf8only property
version property
volblocksize property
volsize property
vscan property
xattr property
zfs allow -c perm|@setname[,perm|@setname]... filesystem|volume

Sets "create time" permissions. These permissions are granted (locally) to the creator of any newly-created descendent file system.

zfs allow -s @setname perm|@setname[,perm|@setname]... filesystem|volume

Defines or adds permissions to a permission set. The set can be used by other "zfs allow" commands for the specified file system and its descendents. Sets are evaluated dynamically, so changes to a set are immediately reflected. Permission sets follow the same naming restrictions as ZFS file systems, but the name must begin with an "at sign" (@), and can be no more than 64 characters long.

zfs unallow [-rldug] user|group[,user|group]... [perm|@setname[,perm|@setname]...] filesystem|volume
 
zfs unallow [-rld] -e|everyone [perm|@setname[,perm|@setname]...] filesystem|volume
 
zfs unallow [-r] -c [perm|@setname[,perm|@setname]...] filesystem|volume

Removes permissions that were granted with the "zfs allow" command. No permissions are explicitly denied, so other permissions granted are still in effect. For example, if the permission is granted by an ancestor. If no permissions are specified, then all permissions for the specified user, group, or everyone are removed. Specifying everyone (or using the -e option) only removes the permissions that were granted to everyone, not all permissions for every user and group. See the "zfs allow" command for a description of the -ldugec options.

Recursively remove the permissions from this file system and all descendents.
zfs unallow [-r] -s @setname [perm|@setname[,perm|@setname]...] filesystem|volume

Removes permissions from a permission set. If no permissions are specified, then all permissions are removed, thus removing the set entirely.

zfs hold [-r] tag snapshot...

Adds a single reference, named with the tag argument, to the specified snapshot or snapshots. Each snapshot has its own tag namespace, and tags must be unique within that space.

If a hold exists on a snapshot, attempts to destroy that snapshot by using the "zfs destroy" command returns .

Specifies that a hold with the given tag is applied recursively to the snapshots of all descendent file systems.
zfs holds [-r] snapshot...

Lists all existing user references for the given snapshot or snapshots.

Lists the holds that are set on the named descendent snapshots, in addition to listing the holds on the named snapshot.
zfs release [-r] tag snapshot...

Removes a single reference, named with the tag argument, from the specified snapshot or snapshots. The tag must already exist for each snapshot.

Recursively releases a hold with the given tag on the snapshots of all descendent file systems.
zfs diff [-FHt] snapshot [snapshot|filesystem]

Display the difference between a snapshot of a given filesystem and another snapshot of that filesystem from a later time or the current contents of the filesystem. The first column is a character indicating the type of change, the other columns indicate pathname, new pathname (in case of rename), change in link count, and optionally file type and/or change time.

The types of change are:

- path was removed
+ path was added
M path was modified
R path was renamed
Display an indication of the type of file, in a manner similar to the -F option of ls(1).
B block device
C character device
F regular file
/ directory
@ symbolic link
= socket
> door (not supported on FreeBSD)
| named pipe (not supported on FreeBSD)
P event port (not supported on FreeBSD)
Give more parsable tab-separated output, without header lines and without arrows.
Display the path's inode change time as the first column of output.
zfs jail jailid filesystem

Attaches the specified filesystem to the jail identified by JID jailid. From now on this file system tree can be managed from within a jail if the jailed property has been set. To use this functionality, the jail needs the allow.mount and allow.mount.zfs parameters set to 1 and the enforce_statfs parameter set to a value lower than 2.

See jail(8) for more information on managing jails and configuring the parameters above.

zfs unjail jailid filesystem

Detaches the specified filesystem from the jail identified by JID jailid.

EXIT STATUS

The following exit values are returned:

0
Successful completion.
1
An error occurred.
2
Invalid command line options were specified.

EXAMPLES

Creating a ZFS File System Hierarchy

The following commands create a file system named pool/home and a file system named pool/home/bob. The mount point /home is set for the parent file system, and is automatically inherited by the child file system.

# zfs create pool/home
# zfs set mountpoint=/home pool/home
# zfs create pool/home/bob
Creating a ZFS Snapshot

The following command creates a snapshot named yesterday. This snapshot is mounted on demand in the .zfs/snapshot directory at the root of the pool/home/bob file system.

# zfs snapshot pool/home/bob@yesterday
Creating and Destroying Multiple Snapshots

The following command creates snapshots named yesterday of pool/home and all of its descendent file systems. Each snapshot is mounted on demand in the .zfs/snapshot directory at the root of its file system. The second command destroys the newly created snapshots.

# zfs snapshot -r pool/home@yesterday
# zfs destroy -r pool/home@yesterday
Disabling and Enabling File System Compression

The following command disables the compression property for all file systems under pool/home. The next command explicitly enables compression for pool/home/anne.

# zfs set compression=off pool/home
# zfs set compression=on pool/home/anne
Listing ZFS Datasets

The following command lists all active file systems and volumes in the system. Snapshots are displayed if the listsnaps property is on. The default is off. See zpool(8) for more information on pool properties.

# zfs list
   NAME                      USED  AVAIL  REFER  MOUNTPOINT
   pool                      450K   457G    18K  /pool
   pool/home                 315K   457G    21K  /home
   pool/home/anne             18K   457G    18K  /home/anne
   pool/home/bob             276K   457G   276K  /home/bob
Setting a Quota on a ZFS File System

The following command sets a quota of 50 Gbytes for pool/home/bob.

# zfs set quota=50G pool/home/bob
Listing ZFS Properties

The following command lists all properties for pool/home/bob.

# zfs get all pool/home/bob
NAME           PROPERTY              VALUE                  SOURCE
pool/home/bob  type                  filesystem             -
pool/home/bob  creation              Tue Jul 21 15:53 2009  -
pool/home/bob  used                  21K                    -
pool/home/bob  available             20.0G                  -
pool/home/bob  referenced            21K                    -
pool/home/bob  compressratio         1.00x                  -
pool/home/bob  mounted               yes                    -
pool/home/bob  quota                 20G                    local
pool/home/bob  reservation           none                   default
pool/home/bob  recordsize            128K                   default
pool/home/bob  mountpoint            /home/bob              default
pool/home/bob  sharenfs              off                    default
pool/home/bob  checksum              on                     default
pool/home/bob  compression           on                     local
pool/home/bob  atime                 on                     default
pool/home/bob  devices               on                     default
pool/home/bob  exec                  on                     default
pool/home/bob  filesystem_limit      none                   default
pool/home/bob  setuid                on                     default
pool/home/bob  readonly              off                    default
pool/home/bob  jailed                off                    default
pool/home/bob  snapdir               hidden                 default
pool/home/bob  snapshot_limit        none                   default
pool/home/bob  aclmode               discard                default
pool/home/bob  aclinherit            restricted             default
pool/home/bob  canmount              on                     default
pool/home/bob  xattr                 on                     default
pool/home/bob  copies                1                      default
pool/home/bob  version               5                      -
pool/home/bob  utf8only              off                    -
pool/home/bob  normalization         none                   -
pool/home/bob  casesensitivity       sensitive              -
pool/home/bob  vscan                 off                    default
pool/home/bob  nbmand                off                    default
pool/home/bob  sharesmb              off                    default
pool/home/bob  refquota              none                   default
pool/home/bob  refreservation        none                   default
pool/home/bob  primarycache          all                    default
pool/home/bob  secondarycache        all                    default
pool/home/bob  usedbysnapshots       0                      -
pool/home/bob  usedbydataset         21K                    -
pool/home/bob  usedbychildren        0                      -
pool/home/bob  usedbyrefreservation  0                      -
pool/home/bob  logbias               latency                default
pool/home/bob  dedup                 off                    default
pool/home/bob  mlslabel                                     -
pool/home/bob  sync                  standard               default
pool/home/bob  refcompressratio      1.00x                  -

The following command gets a single property value.

# zfs get -H -o value compression pool/home/bob
on

The following command lists all properties with local settings for pool/home/bob.

# zfs get -s local -o name,property,value all pool/home/bob
NAME           PROPERTY              VALUE
pool/home/bob  quota                 20G
pool/home/bob  compression           on
Rolling Back a ZFS File System

The following command reverts the contents of pool/home/anne to the snapshot named yesterday, deleting all intermediate snapshots.

# zfs rollback -r pool/home/anne@yesterday
Creating a ZFS Clone

The following command creates a writable file system whose initial contents are the same as .

# zfs clone pool/home/bob@yesterday pool/clone
Promoting a ZFS Clone

The following commands illustrate how to test out changes to a file system, and then replace the original file system with the changed one, using clones, clone promotion, and renaming:

# zfs create pool/project/production

Populate /pool/project/production with data and continue with the following commands:

# zfs snapshot pool/project/production@today
# zfs clone pool/project/production@today pool/project/beta

Now make changes to /pool/project/beta and continue with the following commands:

# zfs promote pool/project/beta
# zfs rename pool/project/production pool/project/legacy
# zfs rename pool/project/beta pool/project/production

Once the legacy version is no longer needed, it can be destroyed.

# zfs destroy pool/project/legacy
Inheriting ZFS Properties

The following command causes pool/home/bob and pool/home/anne to inherit the checksum property from their parent.

# zfs inherit checksum pool/home/bob pool/home/anne
Remotely Replicating ZFS Data

The following commands send a full stream and then an incremental stream to a remote machine, restoring them into and , respectively. poolB must contain the file system poolB/received, and must not initially contain .

# zfs send pool/fs@a | ssh host zfs receive poolB/received/fs@a
# zfs send -i a pool/fs@b | ssh host zfs receive poolB/received/fs
Using the "zfs receive -d" Option

The following command sends a full stream of to a remote machine, receiving it into . The portion of the received snapshot's name is determined from the name of the sent snapshot. poolB must contain the file system poolB/received. If does not exist, it is created as an empty file system.

# zfs send poolA/fsA/fsB@snap | ssh host zfs receive -d poolB/received
Setting User Properties

The following example sets the user-defined property for a dataset.

# zfs set com.example:department=12345 tank/accounting
Performing a Rolling Snapshot

The following example shows how to maintain a history of snapshots with a consistent naming scheme. To keep a week's worth of snapshots, the user destroys the oldest snapshot, renames the remaining snapshots, and then creates a new snapshot, as follows:

# zfs destroy -r pool/users@7daysago
# zfs rename -r pool/users@6daysago @7daysago
# zfs rename -r pool/users@5daysago @6daysago
# zfs rename -r pool/users@4daysago @5daysago
# zfs rename -r pool/users@3daysago @4daysago
# zfs rename -r pool/users@2daysago @3daysago
# zfs rename -r pool/users@yesterday @2daysago
# zfs rename -r pool/users@today @yesterday
# zfs snapshot -r pool/users@today
Setting "sharenfs" Property Options on a ZFS File System

The following command shows how to set sharenfs property options to enable root access for a specific network on the file system. The contents of the sharenfs property are valid exports(5) options.

# zfs set sharenfs="maproot=root,network 192.168.0.0/24" tank/home

Another way to write this command with the same result is:

# set zfs sharenfs="-maproot=root -network 192.168.0.0/24" tank/home
Delegating ZFS Administration Permissions on a ZFS Dataset

The following example shows how to set permissions so that user can create, destroy, mount, and take snapshots on tank/cindys. The permissions on tank/cindys are also displayed.

# zfs allow cindys create,destroy,mount,snapshot tank/cindys
# zfs allow tank/cindys
---- Permissions on tank/cindys --------------------------------------
Local+Descendent permissions:
        user cindys create,destroy,mount,snapshot
Delegating Create Time Permissions on a ZFS Dataset

The following example shows how to grant anyone in the group staff to create file systems in tank/users. This syntax also allows staff members to destroy their own file systems, but not destroy anyone else's file system. The permissions on tank/users are also displayed.

# zfs allow staff create,mount tank/users
# zfs allow -c destroy tank/users
# zfs allow tank/users
---- Permissions on tank/users ---------------------------------------
Permission sets:
        destroy
Local+Descendent permissions:
        group staff create,mount
Defining and Granting a Permission Set on a ZFS Dataset

The following example shows how to define and grant a permission set on the tank/users file system. The permissions on tank/users are also displayed.

# zfs allow -s @pset create,destroy,snapshot,mount tank/users
# zfs allow staff @pset tank/users
# zfs allow tank/users
---- Permissions on tank/users ---------------------------------------
Permission sets:
        @pset create,destroy,mount,snapshot
Local+Descendent permissions:
        group staff @pset
Delegating Property Permissions on a ZFS Dataset

The following example shows to grant the ability to set quotas and reservations on the users/home file system. The permissions on users/home are also displayed.

# zfs allow cindys quota,reservation users/home
# zfs allow users/home
---- Permissions on users/home ---------------------------------------
Local+Descendent permissions:
        user cindys quota,reservation
# su - cindys
cindys% zfs set quota=10G users/home/marks
cindys% zfs get quota users/home/marks
NAME              PROPERTY  VALUE  SOURCE
users/home/marks  quota     10G    local
Removing ZFS Delegated Permissions on a ZFS Dataset

The following example shows how to remove the snapshot permission from the staff group on the tank/users file system. The permissions on tank/users are also displayed.

# zfs unallow staff snapshot tank/users
# zfs allow tank/users
---- Permissions on tank/users ---------------------------------------
Permission sets:
        @pset create,destroy,mount,snapshot
Local+Descendent permissions:
        group staff @pset

The following example shows how to see what has changed between a prior snapshot of a ZFS Dataset and its current state. The -F option is used to indicate type information for the files affected.

# zfs diff tank/test@before tank/test
M       /       /tank/test/
M       F       /tank/test/linked      (+1)
R       F       /tank/test/oldname -> /tank/test/newname
-       F       /tank/test/deleted
+       F       /tank/test/created
M       F       /tank/test/modified

SEE ALSO

chmod(2), fsync(2), exports(5), fstab(5), rc.conf(5), jail(8), mount(8), umount(8), zpool(8)

AUTHORS

This manual page is a mdoc(7) reimplementation of the OpenSolaris manual page , modified and customized for FreeBSD and licensed under the Common Development and Distribution License (CDDL).

The mdoc(7) implementation of this manual page was initially written by Martin Matuska ⟨mm@FreeBSD.org⟩.

September 14, 2015 Debian