.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
.TH NTC2PRECONFIG "1" "July 2017" "ntc2preconfig " "User Commands"
.SH NAME
ntc2preconfig \- Runs TPM2_Ntc2Preconfig
.SH DESCRIPTION
\fB\-\-version\-string\fR=\fI\,v1045\/\fR is not a valid option
.PP
ntc2preconfig
.PP
Runs NTC2_PreConfig
.PP
\fB\-prequired\fR \- sets the required values for System P, write only
\fB\-override\fR \- permits individual register values, read\-modify\-write
.PP
Values to set, each is a hex byte, (default do not change)
[\-i2cLoc1_2 byte]
[\-i2cLoc3_4 byte]
[\-AltCfg byte]
[\-Direction byte]
[\-PullUp byte]
[\-PushPull byte]
[\-CFG_A byte]
[\-CFG_B byte]
[\-CFG_C byte]
[\-CFG_D byte]
[\-CFG_E byte]
[\-CFG_F byte]
[\-CFG_G byte]
[\-CFG_H byte]
[\-CFG_I byte]
[\-CFG_J byte]
[\-IsValid byte]
.PP
\fB\-\-version\fR is not a valid option
.PP
ntc2preconfig
.PP
Runs NTC2_PreConfig
.PP
\fB\-prequired\fR \- sets the required values for System P, write only
\fB\-override\fR \- permits individual register values, read\-modify\-write
.PP
Values to set, each is a hex byte, (default do not change)
[\-i2cLoc1_2 byte]
[\-i2cLoc3_4 byte]
[\-AltCfg byte]
[\-Direction byte]
[\-PullUp byte]
[\-PushPull byte]
[\-CFG_A byte]
[\-CFG_B byte]
[\-CFG_C byte]
[\-CFG_D byte]
[\-CFG_E byte]
[\-CFG_F byte]
[\-CFG_G byte]
[\-CFG_H byte]
[\-CFG_I byte]
[\-CFG_J byte]
[\-IsValid byte]
.SH "SEE ALSO"
The full documentation for
.B ntc2preconfig
is maintained as a Texinfo manual.  If the
.B info
and
.B ntc2preconfig
programs are properly installed at your site, the command
.IP
.B info ntc2preconfig
.PP
should give you access to the complete manual.