'\"
'\" Copyright (c) 2004 Joe English
'\"
.TH Geometry 3tk 8.5 Tk "Tk Themed Widget"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OOP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
Ttk_MakeBox, Ttk_PadBox, Ttk_ExpandBox, Ttk_PackBox, Ttk_StickBox, Ttk_PlaceBox, Ttk_BoxContains, Ttk_MakePadding, Ttk_UniformPadding, Ttk_AddPadding, Ttk_RelievePadding, Ttk_GetPaddingFromObj, Ttk_GetBorderFromObj, Ttk_GetStickyFromObj \- Tk themed geometry utilities
.SH SYNOPSIS
.nf
\fB#include <tkTheme.h>\fR

Ttk_Box
\fBTtk_MakeBox\fR(int \fIx\fR, int \fIy\fR, int \fIwidth\fR, int \fIheight\fR);

Ttk_Box
\fBTtk_PadBox\fR(Ttk_Box \fIparcel\fR, Ttk_Padding \fIpadding\fR);

Ttk_Box
\fBTtk_ExpandBox\fR(Ttk_Box \fIparcel\fR, Ttk_Padding \fIpadding\fR);

Ttk_Box
\fBTtk_PackBox\fR(Ttk_Box *\fIcavity\fR, int \fIwidth\fR, int \fIheight\fR, Ttk_Side \fIside\fR);

Ttk_Box
\fBTtk_StickBox\fR(Ttk_Box \fIparcel\fR, int \fIwidth\fR, int \fIheight\fR, unsigned \fIsticky\fR);

Ttk_Box
\fBTtk_PlaceBox\fR(Ttk_Box *\fIcavity\fR, int \fIwidth\fR, int \fIheight\fR, Ttk_Side \fIside\fR, unsigned \fIsticky\fR);

Ttk_Box
\fBTtk_AnchorBox\fR(Ttk_Box \fIparcel\fR, int \fIwidth\fR, int \fIheight\fR, Tk_Anchor \fIanchor\fR);

Ttk_Padding
\fBTtk_MakePadding\fR(short \fIleft\fR, short \fItop\fR, short \fIright\fR, short \fIbottom\fR);

Ttk_Padding
\fBTtk_UniformPadding\fR(short \fIborder\fR);

Ttk_Padding
\fBTtk_AddPadding\fR(Ttk_Padding \fIpadding1\fR, Ttk_Padding \fIpadding2\fR;

Ttk_Padding
\fBTtk_RelievePadding\fR(Ttk_Padding \fIpadding\fR, int \fIrelief\fR);

int
\fBTtk_BoxContains\fR(Ttk_Box \fIbox\fR, int \fIx\fR, int \fIy\fR);

int
\fBTtk_GetPaddingFromObj\fR(Tcl_Interp *\fIinterp\fR, Tk_Window \fItkwin\fR, Tcl_Obj *\fIobjPtr\fR, Ttk_Padding *\fIpadding_rtn\fR);

int
\fBTtk_GetBorderFromObj\fR(Tcl_Interp *\fIinterp\fR, Tcl_Obj *\fIobjPtr\fR, Ttk_Padding *\fIpadding_rtn\fR);

int
\fBTtk_GetStickyFromObj\fR(Tcl_Interp *\fIinterp\fR, Tcl_Obj *\fIobjPtr\fR, int *\fIsticky_rtn\fR);
.fi
.SH ARGUMENTS
.AP Tk_Anchor anchor in
One of the symbolic constants \fBTK_ANCHOR_N\fR, \fBTK_ANCHOR_NE\fR,
etc.  See \fITk_GetAnchorFromObj(3tk)\fR.
.AP "Ttk_Box *" cavity in/out
A rectangular region from which a parcel is allocated.
.AP short border in
Extra padding (in pixels) to add uniformly to each side of a region.
.AP short bottom in
Extra padding (in pixels) to add to the bottom of a region.
.AP Ttk_Box box in
Specifies a rectangular region.
.AP "Ttk_Box *" box_rtn out
A rectangular region.
.AP int height in
The height in pixels of a region.
.AP "Tcl_Interp *" interp in
Used to store error messages.
.AP int left in
Extra padding (in pixels) to add to the left side of a region.
.AP "Tcl_Obj *" objPtr in
String value contains a symbolic name
to be converted to an enumerated value or bitmask.
Internal rep may be be modified to cache corresponding value.
.AP Ttk_Padding padding in
Extra padding to add on the inside of a region.
.AP "Ttk_Padding *" padding_rtn out
Padding present in the inside of a region.
.AP Ttk_Box parcel in
A rectangular region, allocated from a cavity.
.AP int relief in
One of the standard Tk relief options
(\fBTK_RELIEF_RAISED\fR, \fBTK_RELIEF_SUNKEN\fR, etc.).
See \fBTk_GetReliefFromObj\fR.
.AP short right in
Extra padding (in pixels) to add to the right side of a region.
.AP Ttk_Side side in
One of \fBTTK_SIDE_LEFT\fR, \fBTTK_SIDE_TOP\fR,
\fBTTK_SIDE_RIGHT\fR, or \fBTTK_SIDE_BOTTOM\fR.
.AP unsigned sticky in
A bitmask containing one or more of the bits
\fBTTK_STICK_W\fR (west, or left),
\fBTTK_STICK_E\fR (east, or right),
\fBTTK_STICK_N\fR (north, or top), and
\fBTTK_STICK_S\fR (south, or bottom).
\fBTTK_FILL_X\fR is defined as a synonym for (\fBTTK_STICK_W\fR|\fBTTK_STICK_E\fR),
\fBTTK_FILL_Y\fR is a synonym for (\fBTTK_STICK_N\fR|\fBTTK_STICK_S\fR),
and  \fBTTK_FILL_BOTH\fR
is a synonym for (\fBTTK_FILL_X\fR|\fBTTK_FILL_Y\fR).
See also: \fIgrid(3tk)\fR.
.AP Tk_Window tkwin in
Window whose screen geometry determines
the conversion between absolute units and pixels.
.AP short top in
Extra padding at the top of a region.
.AP int width in
The width in pixels of a region.
.AP int x in
X coordinate of upper-left corner of region.
.AP int y in
Y coordinate of upper-left corner of region.
.BE
.SH "BOXES"
.PP
The \fBTtk_Box\fR structure represents a rectangular region of a window:
.CS
typedef struct {
    int \fIx\fR;
    int \fIy\fR;
    int \fIwidth\fR;
    int \fIheight\fR;
} \fBTtk_Box\fR;
.CE
All coordinates are relative to the window.
.PP
\fBTtk_MakeBox\fR is a convenience routine that constructs
a \fBTtk_Box\fR structure representing a region \fIwidth\fR pixels
wide, \fIheight\fR pixels tall, at the specified \fIx, y\fR coordinates.
.PP
\fBTtk_PadBox\fR returns a new box located inside the specified \fIparcel\fR,
shrunken according to the left, top, right, and bottom margins
specified by \fIpadding\fR.
.PP
\fBTtk_ExpandBox\fR is the inverse of \fBTtk_PadBox\fR:
it returns a new box surrounding the specified \fIparcel\fR,
expanded  according to the left, top, right, and bottom margins
specified by \fIpadding\fR.
.PP
\fBTtk_PackBox\fR allocates a parcel \fIwidth\fR by \fIheight\fR
pixels wide on the specified \fIside\fR of the \fIcavity\fR,
and shrinks the \fIcavity\fR accordingly.
.PP
\fBTtk_StickBox\fR places a box with the requested \fIwidth\fR
and \fIheight\fR inside the \fIparcel\fR according to the
\fIsticky\fR bits.
.PP
\fBTtk_PlaceBox\fR combines \fBTtk_PackBox\fR and \fBTtk_StickBox\fR:
it allocates a parcel on the specified \fIside\fR of the \fIcavity\fR,
places a box of the requested size inside the parcel according to \fIsticky\fR,
and shrinks the \fIcavity\fR.
.PP
\fBTtk_AnchorBox\fR places a box with the requested \fIwidth\fR
and \fIheight\fR inside the \fIparcel\fR according to the
specified \fIanchor\fR option.
.PP
\fBTtk_BoxContains\fR tests if the specified \fIx, y\fR coordinate
lies within the rectangular region \fIbox\fR.
.SH "PADDDING"
.PP
The \fBTtk_Padding\fR structure is used to represent
borders, internal padding, and external margins:
.CS
typedef struct {
    short \fIleft\fR;
    short \fItop\fR;
    short \fIright\fR;
    short \fIbottom\fR;
} \fBTtk_Padding\fR;
.CE
.PP
\fBTtk_MakePadding\fR is a convenience routine that constructs
a \fBTtk_Padding\fR structure with the specified left, top, right, and bottom
components.
.PP
\fBTtk_UniformPadding\fR constructs a \fBTtk_Padding\fR structure
with all components equal to the specified \fIborder\fR.
.PP
\fBTtk_AddPadding\fR adds two \fBTtk_Padding\fRs together
and returns a combined padding containing the sum of the
individual padding components.
.PP
\fBTtk_RelievePadding\fR
adds an extra 2 pixels of padding to \fIpadding\fR
according to the specified \fIrelief\fR.
If \fIrelief\fR is \fBTK_RELIEF_SUNKEN\fR,
adds two pixels at the top and left
so the inner region is shifted down and to the left.
If it is \fBTK_RELIEF_RAISED\fR, adds two pixels
at the bottom and right so
the inner region is shifted up and to the right.
Otherwise, adds 1 pixel on all sides.
This is typically used in element geometry procedures to simulate a
.QW pressed-in
look for pushbuttons.
.SH "CONVERSION ROUTINES"
.PP
\fBTtk_GetPaddingFromObj\fR converts the string in \fIobjPtr\fR
to a \fBTtk_Padding\fR structure.
The string representation is a list of
up to four length specifications
.QW "\fIleft top right bottom\fR" .
If fewer than four elements are specified,
\fIbottom\fR defaults to \fItop\fR,
\fIright\fR defaults to \fIleft\fR, and
\fItop\fR defaults to \fIleft\fR.
See \fBTk_GetPixelsFromObj(3tk)\fR for the syntax of length specifications.
.PP
\fBTtk_GetBorderFromObj\fR is the same as \fBTtk_GetPaddingFromObj\fR
except that the lengths are specified as integers
(i.e., resolution-dependent values like \fI3m\fR are not allowed).
.PP
\fBTtk_GetStickyFromObj\fR converts the string in \fIobjPtr\fR
to a \fIsticky\fR bitmask.  The string contains zero or more
of the characters \fBn\fR, \fBs\fR, \fBe\fR, or \fBw\fR.
.SH "SEE ALSO"
Tk_GetReliefFromObj(3tk), Tk_GetPixelsFromObj(3tk), Tk_GetAnchorFromObj(3tk)
.SH "KEYWORDS"
geometry, padding, margins, box, region, sticky, relief