- bookworm 3.06-4
- bookworm-backports 3.08-3~bpo12+2
- testing 3.10-3
- unstable 3.10-3
INIT(8) | Linux System Administrator's Manual | INIT(8) |
NAME¶
init, telinit - process control initialization
SYNOPSIS¶
/sbin/init [ -a ] [ -s ] [ -b ] [
-z xxx ] [ 0123456Ss ]
/sbin/init [ --version ]
/sbin/telinit [ -t SECONDS ] [ 0123456sSQqabcUu ]
/sbin/telinit [ -e VAR[=VAL] ]
DESCRIPTION¶
Init¶
init is the parent of all processes. Its primary role is to create processes from a script stored in the file /etc/inittab (see inittab(5)). This file usually has entries which cause init to spawn gettys on each line that users can log in. It also controls autonomous processes required by any particular system.
RUNLEVELS¶
A runlevel is a software configuration of the system which allows only a selected group of processes to exist. The processes spawned by init for each of these runlevels are defined in the /etc/inittab file. init can be in one of eight runlevels: 0–6 and S (a.k.a. s). The runlevel is changed by having a privileged user run telinit, which sends appropriate signals to init, telling it which runlevel to change to.
Runlevels S, 0, 1, and 6 are reserved. Runlevel S is used to initialize the system on boot. When starting runlevel S (on boot) or runlevel 1 (switching from a multi-user runlevel) the system is entering ``single-user mode'', after which the current runlevel is S. Runlevel 0 is used to halt the system; runlevel 6 is used to reboot the system.
After booting through S the system automatically enters one of the multi-user runlevels 2 through 5, unless there was some problem that needs to be fixed by the administrator in single-user mode. Normally after entering single-user mode the administrator performs maintenance and then reboots the system.
For more information, see the manpages for shutdown(8) and inittab(5).
Runlevels 7-9 are also valid, though not really documented. This is because "traditional" Unix variants don't use them.
Runlevels S and s are the same. Internally they are aliases for the same runlevel.
BOOTING¶
After init is invoked as the last step of the kernel boot sequence, it looks for the file /etc/inittab to see if there is an entry of the type initdefault (see inittab(5)). The initdefault entry determines the initial runlevel of the system. If there is no such entry (or no /etc/inittab at all), a runlevel must be entered at the system console.
Runlevel S or s initialize the system and do not require an /etc/inittab file.
In single user mode, /sbin/sulogin is invoked on /dev/console.
When entering single user mode, init initializes the consoles stty settings to sane values. Clocal mode is set. Hardware speed and handshaking are not changed.
When entering a multi-user mode for the first time, init performs the boot and bootwait entries to allow file systems to be mounted before users can log in. Then all entries matching the runlevel are processed.
When starting a new process, init first checks whether the file /etc/initscript exists. If it does, it uses this script to start the process.
Each time a child terminates, init records the fact and the reason it died in /var/run/utmp and /var/log/wtmp, provided that these files exist.
CHANGING RUNLEVELS¶
After it has spawned all of the processes specified, init waits for one of its descendant processes to die, a powerfail signal, or until it is signaled by telinit to change the system's runlevel. When one of the above three conditions occurs, it re-examines the /etc/inittab file. New entries can be added to this file at any time. However, init still waits for one of the above three conditions to occur. To provide for an instantaneous response, the telinit Q or q command can wake up init to re-examine (reload) the /etc/inittab file.
If init is not in single user mode and receives a powerfail signal (SIGPWR), it reads the file /etc/powerstatus. It then starts a command based on the contents of this file:
- F(AIL)
- Power is failing, UPS is providing the power. Execute the powerwait and powerfail entries.
- O(K)
- The power has been restored, execute the powerokwait entries.
- L(OW)
- The power is failing and the UPS has a low battery. Execute the powerfailnow entries.
If /etc/powerstatus doesn't exist or contains anything else then the letters F, O or L, init will behave as if it has read the letter F.
Usage of SIGPWR and /etc/powerstatus is discouraged. Someone wanting to interact with init should use the /run/initctl control channel - see the initctl(5) manual page for more documentation about this.
When init is requested to change the runlevel, it sends the warning signal SIGTERM to all processes that are undefined in the new runlevel. It then waits 3 seconds before forcibly terminating these processes via the SIGKILL signal. Note that init assumes that all these processes (and their descendants) remain in the same process group which init originally created for them. If any process changes its process group affiliation it will not receive these signals. Such processes need to be terminated separately.
TELINIT¶
/sbin/telinit is linked to /sbin/init. It takes a one-character argument and signals init to perform the appropriate action. The following arguments serve as directives to telinit:
- 0, 1, 2, 3, 4, 5 or 6
- tell init to switch to the specified run level.
- a, b, c
- tell init to process only those /etc/inittab file entries having runlevel a, b or c.
- Q or q
- tell init to re-examine the /etc/inittab file.
- S or s
- tell init to switch to single user mode.
- U or u
- tell init to re-execute itself (preserving the state). No re-examining of /etc/inittab file happens. Runlevel should be one of Ss0123456 otherwise request would be silently ignored.
telinit can tell init how long it should wait between sending processes the SIGTERM and SIGKILL signals. The default is 3 seconds, but this can be changed with the -t option.
telinit -e tells init to change the environment for processes it spawns. The argument of -e is either of the form VAR=VAL which sets variable VAR to value VAL, or of the form VAR (without an equality sign) which unsets variable VAR.
telinit can be invoked only by users with appropriate privileges.
The init binary checks if it is init or telinit by looking at its process id; the real init's process id is always 1. From this it follows that instead of calling telinit one can also just use init instead as a shortcut.
ENVIRONMENT¶
Init sets the following environment variables for all its children:
- PATH
- /bin:/usr/bin:/sbin:/usr/sbin
- INIT_VERSION
- As the name says. Useful to determine if a script runs directly from init.
- RUNLEVEL
- The current system runlevel.
- PREVLEVEL
- The previous runlevel (useful after a runlevel switch).
- CONSOLE
- The system console. This is really inherited from the kernel; however if it is not set init will set it to /dev/console by default.
BOOTFLAGS¶
It is possible to pass a number of flags to init from the boot monitor (eg. LILO or GRUB). init accepts the following flags:
- -s, S, single
- Single user mode boot. In this mode /etc/inittab is examined and the bootup rc scripts are usually run before the single user mode shell is started.
- 1-5
- Runlevel to boot into.
- -b, emergency
- Boot directly into a single user shell without running any other startup scripts.
- -a, auto
- The LILO boot loader adds the word "auto" to the command line if it booted the kernel with the default command line (without user intervention). If this is found init sets the "AUTOBOOT" environment variable to "yes". Note that you cannot use this for any security measures - of course the user could specify "auto" or -a on the command line manually.
- -z xxx
- The argument to -z is ignored. You can use this to expand the command line a bit, so that it takes some more space on the stack. init can then manipulate the command line so that ps(1) shows the current runlevel.
- --version
- This argument, when used on its own, displays the current version of init to the console/stdout. It is a quick way to determine which init software and version is being used. After the version information is displayed, init immediately exits with a return code of zero.
INTERFACE¶
init listens on a fifo in /dev, /run/initctl, for messages. Telinit uses this to communicate with init. The interface is not very well documented or finished. Those interested should study the initreq.h file in the src/ subdirectory of the init source code tar archive.
SIGNALS¶
Init reacts to several signals:
- SIGHUP
- Has the same effect as telinit q.
- SIGUSR1
- On receipt of this signals, init closes and re-opens its control fifo, /run/initctl. Useful for bootscripts when /dev is remounted.
- SIGUSR2
- When init receives SIGUSR2, init closes and leaves the control fifo, /run/initctl, closed. This may be used to make sure init is not holding open any files. However, it also prevents init from switching runlevels. Which means commands like shutdown no longer work. The fifo can be re-opened by sending init the SIGUSR1 signal.
- SIGINT
- Normally the kernel sends this signal to init when CTRL-ALT-DEL is pressed. It activates the ctrlaltdel action.
- SIGWINCH
- The kernel sends this signal when the KeyboardSignal key is hit. It activates the kbrequest action.
CONFORMING TO¶
init is compatible with the System V init. It works closely together with the scripts in the directories /etc/init.d and /etc/rc{runlevel}.d. If your system uses this convention, there should be a README file in the directory /etc/init.d explaining how these scripts work.
FILES¶
/etc/inittab /etc/initscript /dev/console /var/run/utmp /var/log/wtmp /run/initctl
WARNINGS¶
init assumes that processes and descendants of processes remain in the same process group which was originally created for them. If the processes change their group, init can't kill them and you may end up with two processes reading from one terminal line.
On a Debian system, entering runlevel 1 causes all processes to be killed except for kernel threads and the script that does the killing and other processes in its session. As a consequence of this, it isn't safe to return from runlevel 1 to a multi-user runlevel: daemons that were started in runlevel S and are needed for normal operation are no longer running. The system should be rebooted.
DIAGNOSTICS¶
If init finds that it is continuously respawning an entry more than 10 times in 2 minutes, it will assume that there is an error in the command string, generate an error message on the system console, and refuse to respawn this entry until either 5 minutes has elapsed or it receives a signal. This prevents it from eating up system resources when someone makes a typographical error in the /etc/inittab file or the program for the entry is removed.
AUTHOR¶
Miquel van Smoorenburg, initial manual page by Michael Haardt.
SEE ALSO¶
getty(1), login(1), sh(1), runlevel(8), shutdown(8), kill(1), initctl(5), inittab(5), initscript(5), utmp(5)
29 Jul 2004 | sysvinit |