.TH solaar-cli 1 "June 06, 2014" solaar
.SH NAME
solaar-cli \- wireless Logitech device manager
.SH SYNOPSIS
.B solaar-cli
[\fIoptions\fP]
.BR show | config | pair | unpair
.SH DESCRIPTION
.B solaar-cli
is a command-line device manager for Logitech wireless devices
(keyboards and mice). It supports many recent Unifying devices, allows
pairing and unpairing devices, querying the battery level, and
configuring various features such as smooth scrolling, side
scrolling...
.PP
.SH OPTIONS
.B solaar-cli
accepts the following options:
.TP
.BR \-h ", " \-\-help
Displays a brief help message and quits. (This option is also
available on all commands.)
.TP
.BR \-d ", " \-\-debug
Starts the graphical device manager and prints logging messages during
execution.
.TP
.BR \-V ", " \-\-version
Displays the program's version number and quits.
.TP
.BR \-D " <\fIpath\fP>, " \-\-hidraw " <\fIpath\fP>"
Specifies the Unifying receiver to use; by default the first detected
receiver is used. \fIpath\fP will typically be of the form
\fB/dev/hidraw2\fP.
.SH COMMANDS
.TP
.BR show " [" \-h "] [" \-v "] [\fIdevice\fP]"
Displays the available information on the given device (or all if none
is specified). \fB\-v\fP displays all the available information,
verbosely. \fIdevice\fP can be \fBreceiver\fP to display information
on the receivers, \fBall\fP to display information about all devices,
a device number (as indicated in the list of all devices), a device
serial number, or at least three characters of a device name.
.TP
.BR config " [" \-h "] " \fIdevice\fP " [\fIsetting\fP [\fIvalue\fP]]"
Displays or modifies configuration settings on the give
device. \fIdevice\fP can be a device number (as indicated in the list
of all devices given by \fBshow\fP), a device serial number, or at
least three characters of a device name. If no configuration setting
is specified, all settings for the device are displayed, along with
possible values.
.TP
.BR pair " [" \-h "]"
Pairs a new device to an attached receiver.
.TP
.BR unpair " [" \-h "] \fIdevice\fP"
Unpairs the given device. \fIdevice\fP can be a device number (as
indicated in the list of all devices given by \fBshow\fP), a device
serial number, or at least three characters of a device name.
.SH AUTHORS
\fBsolaar-cli\fP was written by Daniel Pavel.

This manual page was written by Stephen Kitt <skitt@debian.org>, for
the Debian GNU/Linux system (but may be used by others). It was last
modified for \fBsolaar\fP version 0.9.2.