.\" Man page generated from reStructuredText.
.
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "QEMU-STORAGE-DAEMON" "1" "Apr 21, 2023" "8.0.0" "QEMU"
.SH NAME
qemu-storage-daemon \- QEMU storage daemon
.SH SYNOPSIS
.sp
\fBqemu\-storage\-daemon\fP [options]
.SH DESCRIPTION
.sp
\fBqemu\-storage\-daemon\fP provides disk image functionality from QEMU,
\fBqemu\-img\fP, and \fBqemu\-nbd\fP in a long\-running process controlled via QMP
commands without running a virtual machine.
It can export disk images, run block job operations, and
perform other disk\-related operations. The daemon is controlled via a QMP
monitor and initial configuration from the command\-line.
.sp
The daemon offers the following subset of QEMU features:
.INDENT 0.0
.IP \(bu 2
Block nodes
.IP \(bu 2
Block jobs
.IP \(bu 2
Block exports
.IP \(bu 2
Throttle groups
.IP \(bu 2
Character devices
.IP \(bu 2
Crypto and secrets
.IP \(bu 2
QMP
.IP \(bu 2
IOThreads
.UNINDENT
.sp
Commands can be sent over a QEMU Monitor Protocol (QMP) connection. See the
\fBqemu\-storage\-daemon\-qmp\-ref(7)\fP manual page for a description of the
commands.
.sp
The daemon runs until it is stopped using the \fBquit\fP QMP command or
SIGINT/SIGHUP/SIGTERM.
.sp
\fBWarning:\fP Never modify images in use by a running virtual machine or any
other process; this may destroy the image. Also, be aware that querying an
image that is being modified by another process may encounter inconsistent
state.
.SH OPTIONS
.sp
Standard options:
.INDENT 0.0
.TP
.B \-h, \-\-help
Display help and exit
.UNINDENT
.INDENT 0.0
.TP
.B \-V, \-\-version
Display version information and exit
.UNINDENT
.INDENT 0.0
.TP
.B \-T, \-\-trace [[enable=]PATTERN][,events=FILE][,file=FILE]
Specify tracing options.
.sp
\fB[enable=]PATTERN\fP
.INDENT 7.0
.INDENT 3.5
Immediately enable events matching \fIPATTERN\fP
(either event name or a globbing pattern).  This option is only
available if QEMU has been compiled with the \fBsimple\fP, \fBlog\fP
or \fBftrace\fP tracing backend.  To specify multiple events or patterns,
specify the \fB\-trace\fP option multiple times.
.sp
Use \fB\-trace help\fP to print a list of names of trace points.
.UNINDENT
.UNINDENT
.sp
\fBevents=FILE\fP
.INDENT 7.0
.INDENT 3.5
Immediately enable events listed in \fIFILE\fP\&.
The file must contain one event name (as listed in the \fBtrace\-events\-all\fP
file) per line; globbing patterns are accepted too.  This option is only
available if QEMU has been compiled with the \fBsimple\fP, \fBlog\fP or
\fBftrace\fP tracing backend.
.UNINDENT
.UNINDENT
.sp
\fBfile=FILE\fP
.INDENT 7.0
.INDENT 3.5
Log output traces to \fIFILE\fP\&.
This option is only available if QEMU has been compiled with
the \fBsimple\fP tracing backend.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B \-\-blockdev BLOCKDEVDEF
is a block node definition. See the \fBqemu(1)\fP manual page for a
description of block node properties and the \fBqemu\-block\-drivers(7)\fP
manual page for a description of driver\-specific parameters.
.UNINDENT
.INDENT 0.0
.TP
.B \-\-chardev CHARDEVDEF
is a character device definition. See the \fBqemu(1)\fP manual page for
a description of character device properties. A common character device
definition configures a UNIX domain socket:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
\-\-chardev socket,id=char1,path=/var/run/qsd\-qmp.sock,server=on,wait=off
.ft P
.fi
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B \-\-export [type=]nbd,id=<id>,node\-name=<node\-name>[,name=<export\-name>][,writable=on|off][,bitmap=<name>]
.TP
.B \-\-export [type=]vhost\-user\-blk,id=<id>,node\-name=<node\-name>,addr.type=unix,addr.path=<socket\-path>[,writable=on|off][,logical\-block\-size=<block\-size>][,num\-queues=<num\-queues>]
.TP
.B \-\-export [type=]vhost\-user\-blk,id=<id>,node\-name=<node\-name>,addr.type=fd,addr.str=<fd>[,writable=on|off][,logical\-block\-size=<block\-size>][,num\-queues=<num\-queues>]
.TP
.B \-\-export [type=]fuse,id=<id>,node\-name=<node\-name>,mountpoint=<file>[,growable=on|off][,writable=on|off][,allow\-other=on|off|auto]
.TP
.B \-\-export [type=]vduse\-blk,id=<id>,node\-name=<node\-name>,name=<vduse\-name>[,writable=on|off][,num\-queues=<num\-queues>][,queue\-size=<queue\-size>][,logical\-block\-size=<block\-size>][,serial=<serial\-number>]
is a block export definition. \fBnode\-name\fP is the block node that should be
exported. \fBwritable\fP determines whether or not the export allows write
requests for modifying data (the default is off).
.sp
The \fBnbd\fP export type requires \fB\-\-nbd\-server\fP (see below). \fBname\fP is
the NBD export name (if not specified, it defaults to the given
\fBnode\-name\fP). \fBbitmap\fP is the name of a dirty bitmap reachable from the
block node, so the NBD client can use NBD_OPT_SET_META_CONTEXT with the
metadata context name \(dqqemu:dirty\-bitmap:BITMAP\(dq to inspect the bitmap.
.sp
The \fBvhost\-user\-blk\fP export type takes a vhost\-user socket address on which
it accept incoming connections. Both
\fBaddr.type=unix,addr.path=<socket\-path>\fP for UNIX domain sockets and
\fBaddr.type=fd,addr.str=<fd>\fP for file descriptor passing are supported.
\fBlogical\-block\-size\fP sets the logical block size in bytes (the default is
512). \fBnum\-queues\fP sets the number of virtqueues (the default is 1).
.sp
The \fBfuse\fP export type takes a mount point, which must be a regular file,
on which to export the given block node. That file will not be changed, it
will just appear to have the block node\(aqs content while the export is active
(very much like mounting a filesystem on a directory does not change what the
directory contains, it only shows a different content while the filesystem is
mounted). Consequently, applications that have opened the given file before
the export became active will continue to see its original content. If
\fBgrowable\fP is set, writes after the end of the exported file will grow the
block node to fit.  The \fBallow\-other\fP option controls whether users other
than the user running the process will be allowed to access the export.  Note
that enabling this option as a non\-root user requires enabling the
user_allow_other option in the global fuse.conf configuration file.  Setting
\fBallow\-other\fP to auto (the default) will try enabling this option, and on
error fall back to disabling it.
.sp
The \fBvduse\-blk\fP export type takes a \fBname\fP (must be unique across the host)
to create the VDUSE device.
\fBnum\-queues\fP sets the number of virtqueues (the default is 1).
\fBqueue\-size\fP sets the virtqueue descriptor table size (the default is 256).
.sp
The instantiated VDUSE device must then be added to the vDPA bus using the
vdpa(8) command from the iproute2 project:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
# vdpa dev add name <id> mgmtdev vduse
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The device can be removed from the vDPA bus later as follows:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
# vdpa dev del <id>
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
For more information about attaching vDPA devices to the host with
virtio_vdpa.ko or attaching them to guests with vhost_vdpa.ko, see
\fI\%https://vdpa\-dev.gitlab.io/\fP\&.
.sp
For more information about VDUSE, see
\fI\%https://docs.kernel.org/userspace\-api/vduse.html\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B \-\-monitor MONITORDEF
is a QMP monitor definition. See the \fBqemu(1)\fP manual page for
a description of QMP monitor properties. A common QMP monitor definition
configures a monitor on character device \fBchar1\fP:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
\-\-monitor chardev=char1
.ft P
.fi
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B \-\-nbd\-server addr.type=inet,addr.host=<host>,addr.port=<port>[,tls\-creds=<id>][,tls\-authz=<id>][,max\-connections=<n>]
.TP
.B \-\-nbd\-server addr.type=unix,addr.path=<path>[,tls\-creds=<id>][,tls\-authz=<id>][,max\-connections=<n>]
.TP
.B \-\-nbd\-server addr.type=fd,addr.str=<fd>[,tls\-creds=<id>][,tls\-authz=<id>][,max\-connections=<n>]
is a server for NBD exports. Both TCP and UNIX domain sockets are supported.
A listen socket can be provided via file descriptor passing (see Examples
below). TLS encryption can be configured using \fB\-\-object\fP tls\-creds\-* and
authz\-* secrets (see below).
.sp
To configure an NBD server on UNIX domain socket path
\fB/var/run/qsd\-nbd.sock\fP:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
\-\-nbd\-server addr.type=unix,addr.path=/var/run/qsd\-nbd.sock
.ft P
.fi
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B \-\-object help
.TP
.B \-\-object <type>,help
.TP
.B \-\-object <type>[,<property>=<value>...]
is a QEMU user creatable object definition. List object types with \fBhelp\fP\&.
List object properties with \fB<type>,help\fP\&. See the \fBqemu(1)\fP
manual page for a description of the object properties.
.UNINDENT
.INDENT 0.0
.TP
.B \-\-pidfile PATH
is the path to a file where the daemon writes its pid. This allows scripts to
stop the daemon by sending a signal:
.INDENT 7.0
.INDENT 3.5
.sp
.nf
.ft C
$ kill \-SIGTERM $(<path/to/qsd.pid)
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
A file lock is applied to the file so only one instance of the daemon can run
with a given pid file path. The daemon unlinks its pid file when terminating.
.sp
The pid file is written after chardevs, exports, and NBD servers have been
created but before accepting connections. The daemon has started successfully
when the pid file is written and clients may begin connecting.
.UNINDENT
.INDENT 0.0
.TP
.B \-\-daemonize
Daemonize the process. The parent process will exit once startup is complete
(i.e., after the pid file has been or would have been written) or failure
occurs. Its exit code reflects whether the child has started up successfully
or failed to do so.
.UNINDENT
.SH EXAMPLES
.sp
Launch the daemon with QMP monitor socket \fBqmp.sock\fP so clients can execute
QMP commands:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ qemu\-storage\-daemon \e
    \-\-chardev socket,path=qmp.sock,server=on,wait=off,id=char1 \e
    \-\-monitor chardev=char1
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Launch the daemon from Python with a QMP monitor socket using file descriptor
passing so there is no need to busy wait for the QMP monitor to become
available:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
#!/usr/bin/env python3
import subprocess
import socket

sock_path = \(aq/var/run/qmp.sock\(aq

with socket.socket(socket.AF_UNIX, socket.SOCK_STREAM) as listen_sock:
    listen_sock.bind(sock_path)
    listen_sock.listen()

    fd = listen_sock.fileno()

    subprocess.Popen(
        [\(aqqemu\-storage\-daemon\(aq,
         \(aq\-\-chardev\(aq, f\(aqsocket,fd={fd},server=on,id=char1\(aq,
         \(aq\-\-monitor\(aq, \(aqchardev=char1\(aq],
        pass_fds=[fd],
    )

# listen_sock was automatically closed when leaving the \(aqwith\(aq statement
# body. If the daemon process terminated early then the following connect()
# will fail with \(dqConnection refused\(dq because no process has the listen
# socket open anymore. Launch errors can be detected this way.

qmp_sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
qmp_sock.connect(sock_path)
\&...QMP interaction...
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The same socket spawning approach also works with the \fB\-\-nbd\-server
addr.type=fd,addr.str=<fd>\fP and \fB\-\-export
type=vhost\-user\-blk,addr.type=fd,addr.str=<fd>\fP options.
.sp
Export raw image file \fBdisk.img\fP over NBD UNIX domain socket \fBnbd.sock\fP:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ qemu\-storage\-daemon \e
    \-\-blockdev driver=file,node\-name=disk,filename=disk.img \e
    \-\-nbd\-server addr.type=unix,addr.path=nbd.sock \e
    \-\-export type=nbd,id=export,node\-name=disk,writable=on
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Export a qcow2 image file \fBdisk.qcow2\fP as a vhost\-user\-blk device over UNIX
domain socket \fBvhost\-user\-blk.sock\fP:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ qemu\-storage\-daemon \e
    \-\-blockdev driver=file,node\-name=file,filename=disk.qcow2 \e
    \-\-blockdev driver=qcow2,node\-name=qcow2,file=file \e
    \-\-export type=vhost\-user\-blk,id=export,addr.type=unix,addr.path=vhost\-user\-blk.sock,node\-name=qcow2
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Export a qcow2 image file \fBdisk.qcow2\fP via FUSE on itself, so the disk image
file will then appear as a raw image:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ qemu\-storage\-daemon \e
    \-\-blockdev driver=file,node\-name=file,filename=disk.qcow2 \e
    \-\-blockdev driver=qcow2,node\-name=qcow2,file=file \e
    \-\-export type=fuse,id=export,node\-name=qcow2,mountpoint=disk.qcow2,writable=on
.ft P
.fi
.UNINDENT
.UNINDENT
.SH SEE ALSO
.sp
\fBqemu(1)\fP, \fBqemu\-block\-drivers(7)\fP, \fBqemu\-storage\-daemon\-qmp\-ref(7)\fP
.SH COPYRIGHT
2023, The QEMU Project Developers
.\" Generated by docutils manpage writer.
.